Synthesis methods and powder quality of titanium monocarbide

Titanium monocarbide(TiC),which is the most stable titanium-based carbide,has attracted considerable interest in the fields of energy,catalysis,and structural materials due to its excellent properties.Synthesis of high-quality TiC powders with low cost and high efficiency is crucial for industrial applications;however major challenges face its realization.Herein,the methods for synthesizing TiC powders based on a reaction system are reviewed.This analysis is focused on the underlying mechanisms by which synthesis methods affect the quality of powders.Notably,strategies for improving the synthesis of highquality powders are analyzed from the perspective of enhancing heat and mass transfer processes.Furthermore,the critical issues,challenges,and development trends of the synthesis technology and application of high-quality TiC powder are discussed.

Solriamfetol impurities:Synthesis,characterization,and analytical method(UPLC-UV)validation

Given that impurities may affect the quality and safety of drug products,impurity identification and profiling is an integral part of drug quality control and is particularly important for newly developed medications such as solriamfetol,which is used to treat excessive daytime sleepiness.Although the highperformance liquid chromatography analysis of commercial solriamfetol has revealed the presence of several impurities,their synthesis,structure elucidation,and chromatographic determination have not been reported yet.To bridge this gap,we herein identified,synthesized,and isolated eight processrelated solriamfetol impurities,characterized them using spectroscopic and chromatographic techniques,and proposed plausible mechanisms of their formation.Moreover,we developed and validated a prompt impurity analysis method based on ultrahigh-performance liquid chromatography with UV detection,revealing that its selectivity,linearity,accuracy,precision,and quantitation limit meet the acceptance criteria of method validation stipulated by the International Council for Harmonization of Technical Requirements for Pharmaceuticals for Human Use.Thus,the developed method was concluded to be suitable for the routine analysis of solriamfetol substances.

Synthesis strategies of covalent organic frameworks: An overview from nonconventional heating methods and reaction media

Covalent organic frameworks(COFs), as an emerging class of porous crystalline materials constructed by covalent links between the building monomers, have gained tremendous attention. Over the past 15 years, COFs have made rapid progress and substantial development in the chemistry and materials fields. However, the synthesis of COFs has been dominated by solvothermal methods for a long time and it usually involves high temperature, high pressure and toxic organic solvents, which created many challenges for environmental considerations. Recently,the exploration of new approaches for facile fabrication of COFs has aroused extensive interest. Hence, in this review, we comprehensively describe the synthetic strategies of COFs from the aspects of nonconventional heating methods and reaction media. In addition, the advantages,limitations and properties of the preparation methods are compared. Finally, we outline the main challenges and development prospects of the synthesis of COFs in the future and propose some possible solutions.

Sparse antenna array design methodologies:A review

Designing a sparse array with reduced transmit/receive modules(TRMs)is vital for some applications where the antenna system’s size,weight,allowed operating space,and cost are limited.Sparse arrays exhibit distinct architectures,roughly classified into three categories:Thinned arrays,nonuniformly spaced arrays,and clustered arrays.While numerous advanced synthesis methods have been presented for the three types of sparse arrays in recent years,a comprehensive review of the latest development in sparse array synthesis is lacking.This work aims to fill this gap by thoroughly summarizing these techniques.The study includes synthesis examples to facilitate a comparative analysis of different techniques in terms of both accuracy and efficiency.Thus,this review is intended to assist researchers and engineers in related fields,offering a clear understanding of the development and distinctions among sparse array synthesis techniques.

Synthesis, Characterization and Optical Morphology of ZnO Nanoparticles

The ZnO molecule plays an important role in the industry due to it special features, anti-corrosion anti-bacterial properties, as well as due to its low electrical conductivity and heat resistance. In these experimental researches, the sol-gel method was chosen, which enables control of nucleation, aging and growth of particles in the solution. ZnO synthesis was prepared utilizing chemical method with Zinc acetate dyhidrate and NaOH with the appropriate methanol solvent and heating (60˚C). The methods used in identification and characterization are FTIR, UV/VIS, OPTICAL MICROSCOPY, SEM and XRD. The FTIR spectra of synthesized ZnO with corresponding ones show characteristic bands at the corresponding wavelengths, which confirm the presence of ZnO nanoparticles. SEM characterization of ZnO shows the morphology of needle-shaped nanoparticles. XRD spectar in this research by chemical method indicates the particle size of 17.76 nm.

Study on Component Synthesis Active Vibration Suppression Method Using Zero-placement Technique

The component synthesis active vibration suppression method （CSVS） can be applied to suppress the vibration of flexible systems. By this method, several same or similar time-varying components are arranged according to certain rules along the time axis. The synthesized command can suppress the arbitrary unwanted vibration harmonic while achieving the desired rigid body motion. The number of the components increases rapidly when the number of harmonic vibration is growing. In this article, the CSVS based on zero-placement technique is used to construct the synthesized command to suppress the multi-harmonics simultaneously in the discrete domain. The nature of zero-placement method is to put enough zeros to cancel system poles at necessary points. The designed synthesized command has equal time intervals between each component and which is much easier to be implemented. Using this method, the number of components increases linearly with the increasing of the number of being suppressed harmonics. For the spacecraft with flexible appendages, CSVS based on zero-placement is used to design the time optimal large angle maneuver control strategy. Simulations have verified the validity and superiority of the proposed approach.

Type Synthesis of 4-DOF Parallel Kinematic Mechanisms Based on Grassmann Line Geometry and Atlas Method

Many methods are proposed to deal with the type synthesis of parallel kinematic mechanisms（PKMs）, but most of them are less intuitive to some extent. Thus, to propose a concise and intuitive type synthesis method for engineering application is a very challenging issue, which should be further studied in the field. Grassmann line geometry, which can investigate the dimensions of spatial line-clusters in a concise way, is taken as the mathematic foundation. Atlas method is introduced to visually describe the degrees of freedom（DOFs） and constraints of a mechanism, and the dual rule is brought in to realize the mutual conversion of the freedom-space and constraint-space. Consequently, a systematic method based on Grassmann line geometry and Atlas method is generated and the entire type synthesis process is presented. Three type 4-DOF PKMs, i.e., 1T3R, 2T2R and 3T1R（T： translational DOF; R： rotational DOF）, are classified according to the different combinations of the translational DOFs and rotational DOFs. The type synthesis of 4-DOF PKMs is carried out and the possible configurations are thoroughly investigated. Some new PKMs with useful functions are generated during this procedure. The type synthesis method based on Grassmann line geometry and Atlas method is intuitive and concise, and can reduce the complexity of the PKMs＇ type synthesis. Moreover, this method can provide theoretical guidance for other PKMs＇ type synthesis and engineering application. A novel type synthesis method is proposed, which solves the existing methods＇ problems in terms of complicated, not intuitive and unsuitable for practical application.

Synthesis and Characterization of Y-Doped Mesoporous CeO_2 Using A Chemical Precipitation Method

Using cetyltrimethylammonium bromide （CTAB） as the template agent, cerium nitrate as the cerium resource, yttrium nitrate as the yttrium resource, and ammonium carbonate as the precipitating agent, mesoporous CeO2 powders doped with different yttrium contents were successfully synthesized using a chemical precipitation method, under an alkalescent condition. Properties of the obtained samples were characterized and analyzed with X-ray diffraction （XRD）, energy dispersive analysis of X-rays （EDAX）, transmission electron microscopy （TEM）, infrared （IR） absorbance, and the BET method. For the prepared samples with 20% （molar ratio） Y-doped content, a BET specific surface area of 106. 6 m^2 · g^- 1, with an average pore size of3~27 nm were obtained. XRD patterns showed that the doped samples were with a cubic fluorite structure. TEM micrographs revealed that the doped samples showed a spherical morphology with a diameter ranging from 20 to 30 nm and a round pore shape. IR results indicated that the Ce-O-Ce vibration intensity decreased as the Y-doped content increased. N2 adsorption-desorption isotherms showed that the samples possessed typical mesopore characteristics. The average pore size of the samples decreased alter mesoporous CeO2 was doped with yttrium, and the average pore size decreased largely as the Y-doped content increased.

Synthesis methods of functionalized nanoparticles:a review

With the recent advancement in nanotechnology,nanoparticles(NPs)offer an ample variety of smart functions than conventional materials in various aspects.As compared to larger particles,NPs possess unique characteristics and excellent abilities,such as low toxicity,chemical stability,surface functionality,and biocompatibility.These advantageous properties allow them to be widely utilized in many applications,including biomedical applications,energy applications,IT applications,and industrial applications.In order to fulfill the increasing demands of NP applications,existing NP synthesis methods need to be improved based on the requirements of different applications to further their usage.A comprehensive understanding of the relationships between synthesis parameters and properties of NPs can help us better fine-tune them with designed properties and minimal toxicity.This review paper will discuss the commonly used synthesis methods of functionalized NPs,as well as future directions and challenges to develop various synthesis methods further.

Synthesis of potassium hexatitanate whiskers using hydrothermal method

High quality potassium hexatitanate whiskers were hydrothermally synthesized in one step under moderate temperature and pressure conditions. Effects of the titanium source and reaction conditions on the hydrothermal reaction rate, product phase component, and morphology of whiskers were investigated. The results show that the reactivity of hydrated titania, anatase TiO2, and rutile TiO2 with KOH decreases in turn, and with hydrated titania as titanium source, it is difficult to obtain potassium hexatitanate whiskers with good morphology. In contrast, uniform potassium hexatitanate whiskers with a length of 10-20 μm and a diameter of 200-700 nm were obtained using anatase TiO2 as titanium source. The investigation demonstrates that the initial KOH concentration, annealing temperature and time, molar ratio of K2O/TiO2, etc. significantly affect the morphology of the as-synthesized whiskers. The optimized synthesis condition is as follows： anatase as a titanium source 10 wt.% KOH solution; annealing temperature and time of 300℃ and 5 h, respectively; K2O/TiO2 molar ratio of 5, etc. A rhombic potassium hexatitanate was prepared under the optimum condition and the whisker grew along the [110] direction. The reaction mechanism was discussed.

Fischer–Tropsch synthesis using Co and Co-Ru bifunctional nanocatalyst supported on carbon nanotube prepared via chemical reduction method

We used a chemical reduction method to synthesize the catalysts of cobalt(Co) and cobalt-ruthenium(Co-Ru) bifunctional supported on carbon nanotubes(CNTs) for Fischer–Tropsch synthesis(FTS) in a fixedbed reactor. These Co-Ru/CNTs catalysts were synthesized with various weight proportions of Ru/Co(0.1 to 0.4 wt%) with keeping a fixed amount of cobalt(10 wt%). Moreover, for comparison purpose, CNTs supported Co-and Co(Ru)-based catalysts at same loading as the above catalysts were prepared through impregnation method. We characterize the present catalysts through the various techniques such as Energy–dispersive X-ray(EDX), Transmission Electron Microscopy(TEM), Brunauer–Emmett–Teller(BET),Hydrogen-Temperature-Programmed Reduction(H_2-TPR), Hydrogen-Temperature-Programmed Desorption(H_2-TPD) and O_2 titration. Thus using the chemical reduction method, a narrow particle size distribution was obtained so that the small cobalt particles were confined inside the CNTs. The Co-based catalyst prepared by impregnation was compared with the Co-Ru catalysts at the same loading. The results demonstrated that the use of chemical reduction method led to decrease the average Co oxide cluster size to8.7 nm so that the reduction enhanced about 24% and stabilized an earlier time at the stream. Among the prepared catalysts, the results indicated that the Co-Ru/CNTs catalysts demonstrated high catalytic activity with the highest long-chain hydrocarbons(C_(5+)), selectivity up to 74.76%, which was higher than those we obtained by the Co-Ru/γ-Al_2O_3(61._20%), Co/CNTs(43.68%) and Co/γ-Al_2O_3(37.69%). At the same time, comparing with those catalyst synthesized by impregnation, the use of chemical reduction led to enhancement of the C_(5+) selectivity from 59.30% to 68.83% and increment in FTS rate about 11% for the Co-Ru/CNTs catalyst.

Adding Sub-chain Method for Structural Synthesis of Planar Closed Kinematic Chains

For at least the past five decades,structural synthesis has been used as a main means of finding better mechanisms with some predefined function.In structural synthesis,isomorphism identification is still a problem unsolved well,and to solve this problem is very significant to the design of new mechanisms.According to the given degree of freedom（DOF） and link connection property of planar closed chain mechanisms,vertex assortment is obtained.For solving the isomorphism problem,a method of the adding sub-chains is proposed with the detailed steps and algorithms in the synthesizing process.Employing this method,the identification code and formation code of every topological structure are achieved,therefore many isomorphic structures could be eliminated in time during structural synthesis by comparing those codes among different topological graphs,resulting in the improvement of synthesizing efficiency and accuracy,and the approach for eliminating rigid sub-chains in and after the synthesizing process is also presented.Some examples are given,including how to add sub-chains,how to detect simple rigid sub-chains and how to obtain identification codes and formulation codes et al.Using the adding sub-chain method,the relative information of some common topological graphs is given in the form of table.The comparison result is coincident with many literatures,so the correctness of the adding sub-chain method is convinced.This method will greatly improve the synthesizing efficiency and accuracy,and has a good potential for application.

A New Method for Type Synthesis of 2R1T and 2T1R 3-DOF Redundant Actuated Parallel Mechanisms with Closed Loop Units

The current type synthesis of the redundant actuated parallel mechanisms is adding active-actuated kinematic branches on the basis of the traditional parallel mechanisms,or using screw theory to perform multiple getting intersection and union to complete type synthesis.The number of redundant parallel mechanisms obtained by these two methods is limited.In this paper,based on Grassmann line geometry and Atlas method,a novel and effective method for type synthesis of redundant actuated parallel mechanisms(PMs)with closed-loop units is proposed.Firstly,the degree of freedom(DOF)and constraint line graph of the moving platform are determined successively,and redundant lines are added in constraint line graph to obtain the redundant constraint line graph and their equivalent line graph,and a branch constraint allocation scheme is formulated based on the allocation criteria.Secondly,a scheme is selected and redundant lines are added in the branch chains DOF graph to construct the redundant actuated branch chains with closed-loop units.Finally,the branch chains that meet the requirements of branch chains configuration criteria and F&C(degree of freedom&constraint)line graph are assembled.In this paper,two types of 2 rotational and 1 translational(2R1T)redundant actuated parallel mechanisms and one type of 2 translational and 1 rotational(2T1R)redundant actuated parallel mechanisms with few branches and closed-loop units were taken as examples,and 238,92 and 15 new configurations were synthesized.All the mechanisms contain closed-loop units,and the mechanisms and the actuators both have good symmetry.Therefore,all the mechanisms have excellent comprehensive performance,in which the two rotational DOFs of the moving platform of 2R1T redundant actuated parallel mechanism can be independently controlled.The instantaneous analysis shows that all mechanisms are not instantaneous,which proves the feasibility and practicability of the method.

Synthesis of Codon-optimized Human Interleukin-18 Gene by Combination of Chemical and Enzymatic Method

According to the amino acid sequence and codon preference of E. coli, the human interleukin-18（IL-18） gene was optimized to avoid the rare codons. The total length of the synthesized gene is 571 bp; 18 oligonucleotides, DNA fragments were designed and synthesized by the phosphoramidite four-step chemical method. The whole DNA sequence was synthesized by a one-step total gene synthesis method, and then inserted in pUC18 vector. Five positive clones identified by blue-white colony screening were sent to Shanghai Sangon Biological Engineering Technology and Service Co., Ltd. for sequencing. The sequencing result shows that one clone contained the complete correct gene in all the five positive clones.

Synthesis of mesoporous carbon as electrode material for supercapacitor by modified template method

The pore structures and electrochemical performances of mesoporous carbons prepared by silica sol template method as electrode material for supercapacitor were investigated. The mean pore size and mass specific capacitance of the mesoporous carbons increase with the increase of mass ratio of silica sol to carbon source （glucose）. A modified template method, combining silica sol template method and ZnCl2 chemical activation method, was proposed to improve the mass specific capacitance of the mesoporous carbon with an improved BET surface area. The correlation of rate capability and pore structure was studied by constant current discharge and electrochemical impedance spectroscopy. A commercially available microporous carbon was used for comparison. The result shows that mesoporous carbon with a larger pore size displays a higher rate capability. Mesoporous carbon synthesized by modified template method has both high mass specific capacitance and good rate capability.

Synthesis and Structure Transformation of Orthorhombic LiMnO2 Cathode Materials by Sol-gel Method

Orthorhombic LiMnO2 cathode materials were synthesized successfully at lower temperature by sol-gel method. When LiMnO2 precursor prepared by sol-gel method was fired in air, the product was a mixture of spinel structure LiMn2O4 and rock-salt structure Li2MnO3, whereas in argon single-phase orthorhombic LiMnO2 could obtain at the range of 750℃ to 920℃. The substitution of Mn by Zn2+ or Co3+ in LiMnO2 led to the structure of LiMnO2 transiting to Qα-LiFeO2. The results of electrochemical cycles indicated that the discharged capacity of orthorhombic-LiMnO2 was smaller at the initial stages, then gradually increased with the increasing of cycle number, finally the capacity stabilized to certain value after about 10th cycles. This phenomenon reveals that there is an activation process for orthorhombic LiMnO2 cathode materials during electrochemical cycles, which is a phase transition process from orthorhombic LiMnO2 to tetragonal spinel Li2Mn2O4. The capacity of orthorhombic LiMnO2 synthesized at lower temperature is larger than that synthesized at high temperature.

IMPROVED HOMOTOPY ITERATION METHOD AND APPLIED TO THE NINE-POINT PATH SYNTHESIS PROBLEM FOR FOUR-BAR LINKAGES

A new algorithm called homotopy iteration method based on the homotopy function is studied and improved. By the improved homotopy iteration method, Polynomial systems with high Order and deficient can be solved fast and efficiently comparing to the original homotopy iteration method. Numerical examples for the ninepoint path synthesis of four-bar linkages show the advantages and efficiency of the improved homotopy iteration method.

Synthesis and growth mechanism of SiC/SiO2 nanochains by catalyst-free thermal evaporation method in Ar/CO atmosphere

SiC/SiO2 nanochains were synthesized on a carbon fiber substrate by a catalyst-free thermal evaporation method in the Ar/CO atmosphere.X-ray diffraction(XRD),Fourier-transform infrared spectroscopy(FT-IR),scanning electron microscopy(SEM)and transmission electron microscopy(TEM)revealed that the as-synthesized SiC/SiO2 nanochains are composed of single-crystalline SiC nanowires and amorphous SiO2 beads.The introduction of CO can promote the formation of SiO2,so that the SiC/SiO2 nanochains are subsequently formed during cooling.In addition,the photoluminescence spectrum of SiC/SiO2 nanochains showed a broad emission peak at around 350 nm,which is ascribed to the oxygen discrepancy in the SiO2 beads as well as the SiC/SiO2 interfacial effect.These findings can provide guidance for further study of the vapor growth of 1D SiC-based materials.

A METHOD OF SYNTHESIS OF PHENYL-LACTIC ACID AND SUBSTITUTED PHENYL LACTIC ACIDS

A method for the conversion of α-acetamido-β-substituted phenyl acrylic acid (αtβSPAA)into substituted phenyl lactic acid(SPLA)is described and an improved Clemmensen reduction reagent is used.