Comparison of coal separation characteristics based on different separating approaches in dry coal beneficiation flowsheet

The separation characteristic of raw coal from Luoyang mining area, China, was investigated by applying a dry coal beneficiation flowsheet with the dense medium gas-solid fluidized bed as main separating equipment. The experimental and simulation results indicate that the dense medium gas-solid fluidized bed can provide uniform distribution and stable fluctuation of bed densities at various heights. Two types of different separating approaches were compared using the dry coal beneficiation flowsheet. Compared with obtaining cleaning coal in the first stage of the flowsheet, a higher yield of the cleaning coal and better separation efficiency can be achieved when discharging gangue in the first stage. Finally, the results indicate that 64.86% pure cleaning coal with an ash content of 11.77% and 13.53% middlings were obtained, and 21.61% gangue was removed in two successive separation stages with the probable errors of 0.05 and 0.07 g/cm3, respectively.

Failure analysis of wear of main clutch separating ring of heavy vehicles

The severe wear of separating ring is considered to be a main reason which leads to the improper declutch of the main clutch of heavy vehicles. The wear mechanism of the separating ring is not well understood. Scanning electron microscopy and transmission electron microscopy were employed to analyze the surface features and dislocation characteristics of the separating ring. The typical features of furrows and rolled tongue-like metal were found on the surface of separating ring by scanning electron microscopy observation, which can be considered as a major indication of the grain-abrasion. A zone of high density dislocation was noted on the subsurface of the separating ring by transmission electron microscopy observation, which implies the contribution of the severe impact on the surface of the separating ring in the wear process. The influences of the structure of the separating ring, the service condition and the in-service stress distribution on the wear behavior, were also analyzed. The results show that the failure of separating ring results from the impact wear and grain-abrasion together with the plastic deformation.

A new method for separating complex touching equiaxed and lamellar alpha phases in microstructure of titanium alloy

A new method for separating complex touching equiaxed and lamellar alpha phases in the optical micrograph of titanium alloy was proposed for quantitative characterization. This new method involves three steps. First, concave points of the microstructural feature are identified with a threshold of the concaveness of the comer points which are extracted from the binarized image. Secondly, concave points pairs are selected from the concave points group established by means of marker circle or distance. Third, whether a candidate separation line which connects two concave points within a pair can be accepted or not is determined by the proposed four rules. The obtained results show that this method is effective on separating complex touching microstructural features.

A new combination process of distillation with salt extraction for separating organic solvent-water azeotropes

A novel process which can purify the organic solvents from their azeotropes with water is proposed. In this process,water can be drained off both from bottom and overhead of tower at the same time,and the organic solvent is concentrated in the tower and accumulated in the middle vessel at last. So the progress is time-shortened and energy-saving. The product purity is 99. 8% and the product yield is more than 99.5%. Simulation of liquid-liquid equilibrium (LLE) and the equipment operation data agree well with the experiment.

SEPARATING BROWN AND BLACK BEARS IN NORTHEAST CHINA USING TOOTH MEASUREMENTS

An expeditious method for ascertaining species between black bear (Selenarctos thibetanus G. cuiver) and brown bear (Ursus arctos Linnaeus) was developed using tooth measurements from previously identified specimens. The measurement and analysis on 18 tooth measurement indexes (i.e. T1. Length of Pm1-Pm4, T2. L. of M1-M3, T3. M1L., T4. M1 width, T5. M2L., T6. M2W., T7.M3L., T8. M3W., T9. L. of C1 alveolus, T10. W. of C1 alveolus, T11. L. of C1-M2, T12. L. of Pm4 M2,T13.M1L., T14. M1W., T15. M2L., T16. M2W., T17.L. of C1 alveolus, T18. W. of C1 alveolus) of 59 skulls (black bears 25, brown bears 34) indicates that there are significant or the most significant difference between two species in every indexes, however T1, T9, T10, T17 and T18 are not suitable for species discriminator because of their high percent of overlap. The efficient species discriminators and standards (mm) are as follows T2(63.0), T3(22.0), T4(10.2), T5(23.8), T6(13.6), T7(18.0), T8(13.5), T11(110.0),T12(66.0), T13(20. 1), T14(15.8), T15(33.0) and T16(17.3). Those who are less than or equal to standard are classified to black bear, the others are brown bear. The method is very convenient and useful with high reliability. Their lowest accuracy percent are 95.0%, most of them over 97%. Different indexes will be chosen refer to the degree of specimen destroyed.

Study on influencing factors of adapters separating with the underwater missile

To analyze main factors affecting the separation reliability between a missile and adapters for the launching process, a six DOF underwater dynamic model for the missile and adapters is utilized to simulate the separation process, considering elastic forces of separating springs, hydrodynamic forces, gravity and buoyancy. Moreover, a criterion based on the maximum separating distance is put forward to determine whether adapters separate with the missile reliably. The results show that the magnitude and position of elastic force, the wedge angle and mass of the adapter significantly affect the separating process. The local sensitivity analysis for the reference status of design parameters demonstrates that the wedge angle of adapters has the maximum influence about 70. 4% on the separating distance.

SUPPORTING AND SEPARATING SUBSETS FOR INVEX BODIES

Invex bodies represent an important class of bodies which are considered as a generalization of convex bodies.In this article,the author studies the supporting for this class of bodies as well as the separating subsets of two bodies.

Some discussions about method for solving the variable separating nonlinear models

Through analysing the exact solution of some nonlinear models, the role of the variable separating method in solving nonlinear equations is discussed. We find that rich solution structures of some special fields of these equations come from the nonzero seed solution. However, these nonzero seed solutions is likely to result in the divergent phenomena for the other field component of the same equation. The convergence and the signification of all field components should be discussed when someone solves the nonlinear equation using the variable separating method.

Application of the Separating Theorem

This thesis discusses the theory of nonlinear programming (NLP) including the maths solution to a type of inequality of convex function by utilizing the separating Theorem.

Separating trash and solid materials from the wastewater ammonia stripping tower UASB biological oxidation pond processes for the treatment of the swine factory＇s wastewater

By making the use of the processes which includes separating trash and solid materials from the wastewater-ammonia stripping tower-UASB-biological oxidation pond, we have treated the wastewater which comes from the swine factory. The treated wastewater can meet the primary standard of The People＇s Republic of China based on sewage discharge standards and the wastewater treatment project design contract （GBl8596-2001）, and the effluent will be used as irrigation-water. We introduce this project including the quality of influent and effluent and the flow scheme, the statement of every part, the investment and the effect, etc. The operation indicated that this process has many merits such as the stability in operation-effect and the convenience in management. So it will provide some help for the similar wastewater treatment.

Research on Separating Overlapped Explosion Recordings

By using wavelet analysis and the co-deduct method, under the condition that two explosions are supposed to have the same mechanism and strength, we separated the overlapped recordings successfully.

Equivalent Separating Curves on Surfaces and Its Applications to Haken Spheres

1 Introduction Let A be a collection of n pairwise disjoint simple closed curves on an orientable closed surface F of genus n ≥2. We say that A is a complete system of F if the surface obtained by cutting F along A is a 2n-punctured sphere. Let A1, A2 be two non-empty subsets of A. We say that (A1,A2) is a partition of A if A1 ∩A2 = (?) and A1 ∪A2 = A. Let (A1, A2) be a partition of A on F, and C a simple closed curve on F. We say that C is separating with respect to (A1, A2) if it is disjoint from A and it cuts F into two pieces F1,F2 with A1(?) F1,A2 (?) F2.

Equivalent Separating Curves on Closed Surface of Genus 2

Let {A, B} be a complete system of the closed orientable surface F of genus 2. A simple closed curve C on F is separating with respect to （A, B） if it is disjoint from A U B and it cuts F into two once-punctured tori X, Y with A belong X, B belong Y. Let γ be a simple closed curve on F which is disjoint from A ∪ B and intersects C essentially in two points. In this paper, we show that up to isotopy, {hγ^n（C） ： n ∈ Z} is the set containing all the simple closed curves on F which is separating with respect to （A, B）, where hγ is the Dehn twist along γ on F. This also shows how two simple closed curves on F which are separating with respect to （A, B） are related. The result can be applied to yield all Haken spheres of a Heegaard splitting V∪F W which are weakly equivalent to a given Heken sphere of the splitting.

First membrane unit for separating CO_2 from natural gas operational

After a more-than-two-week trial operation, a new membrane unit based on the technology developed by researchers from the CAS Dalian Institute of

Numerical Simulation of Separating Gas Mixtures via Hydrate Formation in Bubble Column

To develop a new technique for separating gas mixtures via hydrate formation,a set of medium-sized experimental bubble column reactor equipment was constructed.On the basis of the structure parameters of the ex- perimental bubble column reactor,assuming that the liquid phase was in the axial dispersion regime and the gas phase was in the plug flow regime,in the presence of hydrate promoter tetrahydrofuran(THF),the rate of hydrogen enrichment for CH4+H2 gas mixtures at different operational conditions(such as temperature,pressure,concentra- tion of gas components,gas flow rate,liquid flow rate)were simulated.The heat product of the hydrate reaction and its axial distribution under different operational conditions were also calculated.The results would be helpful not only to setting and optimizing operation conditions and design of multi-refrigeration equipment,but also to hydrate separation technique industrialization.

Separating and imaging diffractions in dip domain on the basis of slope analysis

Fracture-cave reservoirs in carbonate rocks are characterized by a large difference in fracture and cavity size,and a sharp variation in lithology and velocity,thereby resulting in complex diffraction responses.Some small-scale fractures and caves cause weak diffraction energy and would be obscured by the continuous reflection layer in the imaging section,thereby making them difficult to identify.This paper develops a diffraction wave imaging method in the dip domain,which can improve the resolution of small-scale diffractors in the imaging section.Common imaging gathers(CIGs)in the dip domain are extracted by Gaussian beam migration.In accordance with the geometric differences of the diffraction being quasilinear and the reflection being quasiparabolic in the dip-domain CIGs,we use slope analysis technique to filter waves and use Hanning window function to improve the diffraction wave separation level.The diffraction dip-domain CIGs are stacked horizontally to obtain diffraction imaging results.Wavefield separation analysis and numerical modeling results show that the slope analysis method,together with Hanning window filtering,can better suppress noise to obtain the diffraction dip-domain CIGs,thereby improving the clarity of the diffractors in the diffraction imaging section.

Flotation Separating Rutile from Calcium and Silicon Gangue Minerals

Rutile separation from calcite, apatite and quartz by flotation was investigated. The results show that the rutile separation from calcium and silicon gangue minerals can be realized with alkyl-imino-bismethylene phosphoric acid (TF112) as a collector and sodium hexametaphosphate (SH) as a regulator.

Orthogonality of inductosyn angle-measuring system error and error-separating technology

Round inductosyn is widely used in inertial navigation test equipment, and its accuracy has significant effect on the general accuracy of the equipment. Four main errors of round inductosyn,i.e. the first-order long-period (360°) harmonic error, the second-order long-period harmonic error, the first-order short-period harmonic error and the second-order short-period harmonic error, are described, and the orthogonality of these four kinds of errors is studied. An error separating technology is proposed to separate these four kinds of errors, and in the process of separating the short-period harmonic errors, the arrangement in the order of decimal part of the angle pitch number can be omitted. The effectiveness of the technology proposed is proved through measuring and adjusting the angular errors.

Feasibility Study of Flotation Process in Separating Chicken from Chicken Skeleton

An innovative and effective method of separating chicken meat and bone from chicken skeleton was developed in this study. Different heating approaches to chicken skeleton were compared to optimize cooking conditions including cooking temperature and cooking time. The separation efficiency of chicken meat and bone in different conditions, including flow direction, impeller speed and the liquid level rising velocity were also studied. Experimental results demonstrated high temperature cooking and assisted mechanical stirring could improve separating rate of chicken skeleton. Liquid flow entering at tangent entrance direction of the kettle could maintain the stability of the liquid level and smoothness of the separation process. The outflow rate of chicken meat increased as the liquid level rising velocity raised, and approached to the maximum value at 0.80 cm/s. The practical application test showed that the best conditions for separation of chicken skeleton were: 45 min cooking time at 114°C;tangent flow direction;stir speed of 200 r/min;the liquid level rising velocity of water is 0.8 cm/s. Using this approach, the value of chicken bone was increased, product specialization was enhanced, and the results could be used in future high value chicken product development.

Synthesis and Efficiency of a SphericalMacroporous Epoxy-dicyandiamide ChelateResin for Preconcentrating and SeparatingTrace Au, Hg, Pd and Ru from Samples

A novel spherical macroporous epoxy-dicyandiamide chelate resin was synthesized simply and rapidly from epoxy resin and used for the preconcentration and separation of trace amounts of Au (Ⅲ ), Hg (Ⅱ ), Pd (Ⅳ) and Ru (Ⅲ) ions from solution samples. The analyzed ions can be quantitatively concentrated by the resin at a flow rate of 2. 0 mL/min at pH 4, and can also be desorbed with 15 mL of 4 mol/L HCl + 0. 3 g thiourea from the resin column with recoveries of 96. 5%-99. 0%. After the chelate resin was reused for 7 times, the recoveries of these ions were still over 92%, and 400-1 000 times of excess of Fe(Ⅲ ), Al(Ⅲ ), Ni( II), Mn( Ⅱ ), Cr (Ⅲ ), Cu ( Ⅱ ), Cd (Ⅱ ) and Pb (Ⅱ ) caused little interference with the determination of these ions by an inductively coupled plasma optical emission spectrometer (ICP-OES ). The capacities of the resin for the analytes are in the range of 0. 35~0. 92 mmol/g. The RSDs of the proposed method are in the range of 1. 1 % ~4. 0% for each kind of the analyzed ions. The recoveries of a standard added in real solution samples are between 96. 5% and 98. 5%, and the results for the analyzed ions in a powder sample are in good agreement with their reported values.