期刊文献+
共找到11篇文章
< 1 >
每页显示 20 50 100
Characterization of Flame Retardancy and Oil-Water Separation Capacity of Superhydrophobic Silylated Melamine Sponges
1
作者 Yongchun Liu Ni Qiao +7 位作者 Yanli Yang Yanchun Li Chunxiao He Siyang Wang Chengcheng Liu Ruixia Lei Wang Li Wenwen Gao 《Fluid Dynamics & Materials Processing》 EI 2024年第2期383-400,共18页
A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourie... A silylated melamine sponge(SMS)was prepared by two simple steps,namely,immersion and dehydration of a melamine sponge coated with methyltrichlorosilane.The silylated structure of SMS was characterized by FT-IR(Fourier-transform infrared)spectroscopy,SEM(Scanning electron microscopy)and in terms of water contact angles.Its oil-water absorption and separation capacities were measured by FT-IR and UV-visible spectrophoto-metry.The experimental results have shown that oligomeric silanol covalently bonds by Si-N onto the surface of melamine sponge skeletons.SMS has shown superhydrophobicity with a water contact angle exceeding 150°±1°,a better separation efficiency with regard to diesel oil(by 99.31%(wt/wt%)in oil-water mixture and even up to 99.99%(wt/wt%)for diesel oil in its saturated aqueous solution.Moreover,SMS inherited the intrinsicflame retardancy of the melamine sponge.In general,SMS has shown superhydrophobicity,high porosity,excellent selectivity,remarkable recyclability,and better absorption capacity for various oils and organic solvents,and a high separation efficiency for oil in saturated aqueous solutions. 展开更多
关键词 METHYLTRICHLOROSILANE silylated melamine sponge(SMS) SUPERHYDROPHOBICITY absorption capacity oil-water separable efficiency flame retardancy
下载PDF
4BM-780型黄、红麻剥皮机的设计与试验
2
作者 刘佳杰 马兰 +4 位作者 向伟 颜波 段益平 龙超海 吕江南 《中国麻业科学》 2023年第3期128-135,共8页
针对现有中小型黄、红麻剥皮机剥麻工效低的问题,研究了一种多速差高效分离装置,设计了一种大型黄、红麻剥皮机样机。该机主要由喂入装置、剥皮装置、输出装置、传动系统及控制系统5个部分组成。根据黄、红麻茎秆的物料特性以及剥制时... 针对现有中小型黄、红麻剥皮机剥麻工效低的问题,研究了一种多速差高效分离装置,设计了一种大型黄、红麻剥皮机样机。该机主要由喂入装置、剥皮装置、输出装置、传动系统及控制系统5个部分组成。根据黄、红麻茎秆的物料特性以及剥制时的力学特性,通过理论计算与试验分析,确定了机器剥皮装置主要结构及其设计参数。机器的剥皮装置由碾压夹持滚筒、螺旋揉搓滚筒、梳理分离滚筒组成。碾压夹持辊筒线速度为2.10 m/s,滚筒直径200 mm;螺旋揉搓滚筒线速度为2.72 m/s,滚筒直径为260 mm;梳理分离滚筒线速度为4.39 m/s,滚筒直径为280 mm。对样机进行生产性能试验,结果表明:鲜茎出皮率为43.44%,鲜皮含杂率为12.54%,生产率(鲜茎)2481 kg/h,满足生产要求。该研究丰富了黄、红麻剥制机具类型,为其规模化生产提供了技术支撑,同时为黄、红麻联合收剥一体机的设计与开发提供了系统的理论依据及应用基础。 展开更多
关键词 黄、红麻 农业工程机械 剥皮机 差速高效分离
下载PDF
微重力下气液分离特性的数值模拟 被引量:3
3
作者 杨飞 张永健 《北京交通大学学报》 CAS CSCD 北大核心 2014年第4期14-19,共6页
微重力下离心式气液分离技术以分离环境不受重力条件的影响而广泛应用于航天器流体技术、环境控制与生命保障系统等领域.本文对微重力工况下离心式气液分离特性进行了数值模拟研究,通过正交实验法分析在转速、入口速度、含气量、黏度、... 微重力下离心式气液分离技术以分离环境不受重力条件的影响而广泛应用于航天器流体技术、环境控制与生命保障系统等领域.本文对微重力工况下离心式气液分离特性进行了数值模拟研究,通过正交实验法分析在转速、入口速度、含气量、黏度、温度综合作用时,各因素影响的主次关系.结果表明,转速、含气量、温度、黏度对分离效率的影响比较明显,且随转速、含气量、温度的增加,分离效率逐渐增加,而随黏度的增加分离效率逐渐降低,入口速度对分离效率的影响较小,这与美国地面实验的趋势大致相同,分离效率在92%~94%范围内.研究结果可为我国空间站环控生保技术采用蒸汽压缩蒸馏方法进行尿液分离的进一步研究提供基础数据. 展开更多
关键词 微重力 离心式气液分离 数值模拟 分离效率
下载PDF
支管方向对T形管气液分离效果影响的数值模拟分析 被引量:7
4
作者 赵立新 徐保蕊 +1 位作者 叶大建 刘道友 《石油化工设备》 CAS 2012年第5期10-13,共4页
应用计算流体动力学方法对T形管气、液分离器进行了数值模拟,采用标准k-ε模型为湍流计算模型,针对不同支管放置方向对T形管气、液分离效果的影响进行了模拟分析。分析表明,支管水平放置和竖直向上放置时支管均以气相采出占优;支管竖直... 应用计算流体动力学方法对T形管气、液分离器进行了数值模拟,采用标准k-ε模型为湍流计算模型,针对不同支管放置方向对T形管气、液分离效果的影响进行了模拟分析。分析表明,支管水平放置和竖直向上放置时支管均以气相采出占优;支管竖直向下放置时,分流率为临界值时气液两相均匀分流;支管竖直向上放置时,质量分离效率最高。 展开更多
关键词 T形管 气液分离器 放置方向 质量分离效率 数值模拟
下载PDF
基于柱效指数监测的双波长定量比率指纹图谱评价朱砂安神丸 被引量:2
5
作者 孙国祥 尹霞 +1 位作者 高嘉悦 张建青 《中南药学》 CAS 2014年第9期833-836,共4页
目的建立色谱指纹图谱柱效指数模型,用以检测定量指纹图谱的变化。方法用高效液相色谱二极管阵列检测器同时测定12批朱砂安神丸(ZSASP)在203 nm和286 nm指纹谱(NFP)和比率指纹图谱(ROFP),分别以均值法整合同波长下指纹图谱,最后进行双... 目的建立色谱指纹图谱柱效指数模型,用以检测定量指纹图谱的变化。方法用高效液相色谱二极管阵列检测器同时测定12批朱砂安神丸(ZSASP)在203 nm和286 nm指纹谱(NFP)和比率指纹图谱(ROFP),分别以均值法整合同波长下指纹图谱,最后进行双波长指纹图谱的二次均值整合,计算双波长指纹图谱柱效指数并进行比较。结果以小檗碱(BBR)为参照物峰,确定57(203 nm)和50(286 nm)个共有指纹峰,建立了双波长ZSASP-HPLC指纹图谱和比率指纹图谱。首先将同波长下的NFP和ROFP进行均值整合,之后进行双波长二次均值整合鉴定出S1、S4、S5、S6、S9和S10质量极好(1级),S2、S3、S11和S12质量很好(2级),S7和S8质量次(7级)。在203 nm,S4、S5、S6、S9柱效指数较高,而在286 nm下四者柱效指数较低造成两者差值很大,S8呈现上述反变化过程造成较大差异值。结论色谱指纹图谱柱效指数能监测中药定量指纹图谱的柱效关联分离度后的变化情况,因此柱效指数标志着信号均化性和分离度均化性以及峰宽变动情况。 展开更多
关键词 色谱指纹图谱柱效指数 色谱指纹图谱全分离柱效指数 双波长定量比率指纹图谱 朱砂安神丸
下载PDF
LWZ1200×1800A型沉降过滤式离心脱水机在济三选煤厂的应用 被引量:5
6
作者 于德芳 《选煤技术》 CAS 2013年第5期52-54,共3页
阐述了LWZ1200×1800A型沉降过滤式离心脱水机在济三选煤厂的应用情况,并介绍了该离心机的结构、工作原理、特点及技术参数。生产实践表明:LWZ1200×1800A型沉降过滤式离心脱水机脱水效果好、运行故障少、性能稳定,完全满足选... 阐述了LWZ1200×1800A型沉降过滤式离心脱水机在济三选煤厂的应用情况,并介绍了该离心机的结构、工作原理、特点及技术参数。生产实践表明:LWZ1200×1800A型沉降过滤式离心脱水机脱水效果好、运行故障少、性能稳定,完全满足选煤厂对煤泥回收的需求。 展开更多
关键词 沉降过滤式离心脱水机 工艺流程 煤泥水 应用效果 洗选效率
下载PDF
Experimental Investigation of Hydrodynamic Characteristic of a New Rotating Stream Tray
7
作者 Yuanhui Gong Yan Wang +1 位作者 Huaigong Zhu Wangfeng Cai 《Transactions of Tianjin University》 EI CAS 2019年第4期381-388,共8页
The hydrodynamic characteristic of a new rotating stream tray (NRST) was investigated. The tests were carried out using an air-water/oxygen experimental system in a column with a diameter of 500 mm. The hydrodynamic p... The hydrodynamic characteristic of a new rotating stream tray (NRST) was investigated. The tests were carried out using an air-water/oxygen experimental system in a column with a diameter of 500 mm. The hydrodynamic parameters studied were dry plate pressure drop, wet plate pressure drop, weeping, entrainment, and Murphree liquid effi ciency. The results showed that the NRST has excellent performance in terms of high operational fl exibility. The pressure drop, weeping rate, and entrainment rate remained low even under a high-capacity operation. Correlations of pressure drop, weeping, and entrainment for the NRST were obtained by regression analysis. The results can provide some important theoretical guidance for the development of this type of trays. 展开更多
关键词 ROTATING STREAM TRAY CENTRIFUGAL separation HYDRODYNAMICS Murphree liquid effi ciency
下载PDF
Influence of flange location on axial deformation stability of double-hat structure
8
作者 武雪原 夏勇 周青 《Journal of Beijing Institute of Technology》 EI CAS 2012年第1期41-49,共9页
A new structural configuration with better impact stability for increasing energy absorbing efficiency is found. Based on finite element analysis, deformation modes of double-hat structure under axial impact loading a... A new structural configuration with better impact stability for increasing energy absorbing efficiency is found. Based on finite element analysis, deformation modes of double-hat structure under axial impact loading are categorized to find the main reasons that affect deformation stability. It is revealed that, in a double-hat structure, the location of the flanges is highly related to the deform- ation mode and energy absorbing efficiency. Moving the flanges away from their traditional mid-loca- tion may result in more regular and stable deformation mode and achieve higher energy absorbing ef- ficiency. The flange offset value needs to be controlled within a certain range, otherwise, the doub- le-hat structure would tend to deform like a top-hat structure and the energy absorbing efficiency could be compromised. These findings and analyses lead to a new structural design configuration- asymmetric flange locations--for enhancing the deformation mode stability in double-hat structures. 展开更多
关键词 double-hat structure structural stability plastic deformation energy absorbing effi- ciency
下载PDF
天然胶乳碟式离心机分离效率的影响因素 被引量:4
9
作者 杨耀华 李宗良 《橡胶科技》 2014年第8期31-35,共5页
简述LX-460型天然胶乳碟式离心机的工作原理,考察离心机调节器组合、分离时间、新鲜胶乳干胶浓度、离心机型号对天然胶乳离心分离效率的影响。结果表明:调节螺丝长度适当,分离效率较高;分离时间延长,分离效率降低;新鲜胶乳干胶含量越大... 简述LX-460型天然胶乳碟式离心机的工作原理,考察离心机调节器组合、分离时间、新鲜胶乳干胶浓度、离心机型号对天然胶乳离心分离效率的影响。结果表明:调节螺丝长度适当,分离效率较高;分离时间延长,分离效率降低;新鲜胶乳干胶含量越大,分离效率降低;离心机型号对分离效果有一定的影响。确定合理的工艺参数和分离时间、控制新鲜胶乳质量、良好维护离心机、加强操作人员培训是提高离心机分离效率的重要措施。 展开更多
关键词 碟式离心机 天然胶乳 分离效率
下载PDF
An Experimental Study of Structured Packing in High Pressure Services
10
作者 唐忠利 张鹏 +3 位作者 陈江波 刘春江 袁希钢 余国琮 《Chinese Journal of Chemical Engineering》 SCIE EI CAS CSCD 2004年第4期482-485,共4页
Both distillation performance and hydrodynamic study for backmixing by tracer technique were carried out in a high-pressure packed column with 0.15 m inner diameter over a wide range of operating conditions. Isobutane... Both distillation performance and hydrodynamic study for backmixing by tracer technique were carried out in a high-pressure packed column with 0.15 m inner diameter over a wide range of operating conditions. Isobutane and n-pentane are employed as test mixture in the distillation experiment and air/water is used for the hydrodynamic study. The column is installed with Mellapak 350Y structured packing and the total packing height is 2.0 m. With the increasing operating pressure, the separation efficiency increases slightly while the F-factor corresponding to the maximum efficiency at each pressure is descending. It is noted that, at all operating pressures, with the increase of F-factor, the packing efficiency is slightly higher up to the flooding point. The application of SRP model to high-pressure distillation gives much lower values of HTUOG than those obtained experimentally. An additional term, the height of mixing unit, is introduced to correct the SRP model and improve its accuracy at high pressure. From the tracer experiments, the height of mixing unit for gas phase was found to be larger than that for the liquid phase. From this viewpoint, it is believed that the gas phase backmixing gives more unfavorable influence on the separation efficiency in comparison with liquid phase. 展开更多
关键词 高压蒸馏工艺 轴向渗透 混合工艺 分离系统
下载PDF
空分设备空压机效率下降故障分析及处理
11
作者 李琪 《今日自动化》 2020年第7期84-86,共3页
目前,空分设备已被广泛应用在各领域生产过程中。空压机是空分设备重要组成部分,空压机运行效率可直接影响到空分设备气体生产质量。针对此,本文阐述了空分设备运行效率低下的原因,提出空分设备空压机故障检查以及处理方式,以期为同类... 目前,空分设备已被广泛应用在各领域生产过程中。空压机是空分设备重要组成部分,空压机运行效率可直接影响到空分设备气体生产质量。针对此,本文阐述了空分设备运行效率低下的原因,提出空分设备空压机故障检查以及处理方式,以期为同类型空分设备空压机运行及管理提供理论支持与技术保障。 展开更多
关键词 空分设备 空压机效率下降 故障问题 处理对策
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部