Pretreatment of coking wastewater using anaerobic sequencing batch reactor (ASBR)

A laboratory-scale anaerobic sequencing batch reactor (ASBR) was used to pretreat coking wastewater. Inoculated anaerobic granular biomass was acclimated for 225 d to the coking wastewater, and then the biochemical methane potential (BMP)of the coking wastewater in the acclimated granular biomass was measured. At the same time, some fundamental technological factors, such as the filling time and the reacting time ratio (tf/tr), the mixing intensity and the intermittent mixing mode, that affect anaerobic pretreatment of coking wastewater with ASBR, were evaluated through orthogonal tests. The COD removal efficiency reached 38％～50％ in the stable operation period with the organic loading rate of 0.37～0.54 kg COD/(m3.d) at the optimum conditions of tf/tr, the mixing intensity and the intermittent mixing mode. In addition, the biodegradability of coking wastewater distinctly increased after the pretreatment using ASBR. At the end of the experiment, the microorganism forms on the granulated sludge in the ASBR were observed using SEM (scanning electron microscope) and fluoroscope. The results showed that the dominant microorganism on the granular sludge was Methanosaeta instead of Methanosarcina dominated on the inoculated sludge.

Effect of inorganic carbon on anaerobic ammonium oxidation enriched in sequencing batch reactor

The present lab-scale research reveals the enrichment of anaerobic ammonium oxidation microorganism from methanogenic anaerobic granular sludge and the effect of inorganic carbon(sodium bicarbonate)on anaerobic ammonium oxidation.The enrichment of anammox bacteria was carried out in a 7.0-L sequencing batch reactor(SBR)and the effect of bicarbonate on anammox was conducted in a 3.0-L SBR.Research results,especially the biomass,showed first signs of anammox activity after 54 d cultivation with synthetic wast...

Characteristics of extracellular fluorescent substances of aerobic granular sludge in pilot-scale sequencing batch reactor

The aerobic granular sludge was cultivated in a pilot-scale sequencing batch reactor （SBR）, and some of the granules were stored at 8 ℃ for 150 d. Extracellular polymeric substances （EPS） of sludge samples were extracted and analyzed during the granulation and storage process. The results show that the contents of protein and EPS increase along with the granulation process, while polysaccharides remain almost unchanged. The content of protein in EPS is almost two-fold larger than that of polysaccharides in granular sludge cultivated with municipal wastewater. Moreover, some of the granules disintegrate during storage, corresponding to the decrease of protein contents in EPS. Three peaks are identified in three-dimensional excitation emission matrix （EEM） fluorescence spectra of the EPS in the aerobic granules. Two peaks （A and B） are attributed to the protein-like fluorophores, and the third （peak C） is related to visible fulvic-like substances. Peak A gradually disappears during storage, while a new peak related to ultraviolet fulvic acid （peak D） is formed. The formation and the stability of aerobic granules are closely dependent on the quantity and composition of EPS proteins. Peak C has no obvious changes during granulation, while the fulvic-like substances present an increase in fluorescence intensities during storage, accompanied with an increase in structural complexity. The fulvie-like substances are also associated with the disintegration of the aerobic granules.

Simultaneous biodegradation of nitrogen-containing aromatic compounds in a sequencing batch bioreactor

Many nitrogen-containing aromatic compounds （NACs）, such as nitrobenzene （NB）, 4-nitrophenol （4-NP）, aniline （AN）, and 2,4-dinitrophenol （2,4-DNP）, are environmentally hazardous, and their removal from contaminated water is one of the main challenges facing wastewater treatment plants. In this study, synthetic wastewater containing NB, 4-NP, 2,4-DNP, and AN at concentrations ranging from 50 to 180 mg/L was fed into a sequencing batch reactor （SBR）. Analyses of the SBR system indicated that it simultaneously removed more than 99% of the NACs at loading rates of 0.36 kg NB/（m^3·d）, 0.3 kg 4-NP/（m^3·d）, 0.25 kg AN/（m^3·d）, and 0.1 kg 2,4-DNP/（m^3·d）. Bacterial groups of Bacteriodetes, Candidate division TM7, α-Proteobacteria, and β-Proteobacteria were dominant in the clone libraries of 16S rRNA genes retrieved from the microbial communities in the SBR system. ＂Cycle tests＂ designed to alter feeding and aeration parameters of the SBR system demonstrated that the resident microbial biome of the SBR system responded rapidly to changing conditions. Consumption of O2 was concomitant with the apparent mineralization of NACs. Aromatic ring-cleaving dioxygenase activities suggested that （1） AN and NB were degraded via catechol 2,3-dioxygenase; （2） 4-NP was degraded via 1,2,4-benzentriol 1,2-dioxygenase; and （3） 2,4-DNP was degraded via an unresolved pathway.

Effect of Sludge Retention Time on Nitrite Accumulation in Real-time Control Biological Nitrogen Removal Sequencing Batch Reactor

In this study,four sequencing batch reactors(SBR),with the sludge retention time(SRT)of 5,10,20 and 40 d,were used to treat domestic wastewater,and the effect of SRT on nitrite accumulation in the biological nitrogen removal SBR was investigated.The real-time control strategy based on online parameters,such as pH,dissolved oxygen(DO)and oxidation reduction potential(ORP),was used to regulate the nitrite accumulation in SBR. The model-based simulation and experimental results showed that with the increase of SRT,longer time was needed to achieve high level of nitritation.In addition,the nitrite accumulation rate(NAR)was higher when the SRT was relatively shorter during a 112-day operation.When the SRT was 5 d,the system was unstable with the mixed liquor suspended solids(MLSS)decreased day after day.When the SRT was 40 d,the nitrification process was significantly inhibited.SRT of 10 to 20 d was more suitable in this study.The real-time control strategy combined with SRT control in SBR is an effective method for biological nitrogen removal via nitrite from wastewater.

On-line Monitoring for Phosphorus Removal Process and Bacterial Community in Sequencing Batch Reactor

For efficient energy consumption and control of effluent quality, the cycle duration for a sequencing batch reactor (SBR) needs to be adjusted by real-time control according to the characteristics and loading of waste-water. In this study, an on-line information system for phosphorus removal processes was established. Based on the analysis for four systems with different ecological community structures and two operation modes, anaerobic-aerobic process and anaerobic-anaerobic process, the characteristic patterns of oxidation-reduction potential (ORP) and pH were related to phosphorous dynamics in the anaerobic, anoxic and aerobic phases, for determination of the end of phosphorous removal. In the operation mode of anaerobic-aerobic process, the pH profile in the anaerobic phase was used to estimate the relative amount of phosphorous accumulating organisms (PAOs) and glycogen accumulat-ing organisms (GAOs), which is beneficial to early detection of ecology community shifts. The on-line sensor val-ues of pH and ORP may be used as the parameters to adjust the duration for phosphorous removal and community shifts to cope with influent variations and maintain appropriate operation conditions.

Evaluation of the correlation between ammonia nitrogen and p-toluidine using sequencing batch reactor treating synthetic p-toluidine wastewater

This paper presents lab-scale experiment carried out to evaluate the correlation between ammonia nitrogen （NH3-N） and p-toluidine using sequencing batch reactor treating synthetic p-toluidine wastewater. The profiles of NH3-N and p-toluidine were traced under the concentration of sucrose in the influent varied from 0 to 500 mg/L, aerated airflow varied from 0.6 to 1.2 L/min and temperature varied from 10 to 25℃, respectively. The results showed that the concentration of NH3-N turned from increase to decrease when p-toluidine was nearly completely biodegraded, so the profile of NH3-N could clearly indicate the endpoint of p-toluidine biodegradation. And the profile of NH3-N was not influenced by the sucrose in the influent, aerated airflow and temperature. It is showed that using ammonia nitrogen as monitoring and control parameter is feasible and reliable and has promising application in amine wastewater treatment by SBR.

Combined treatment of landfill leachate with fecal supernatant in sequencing batch reactor

A laboratory-scale sequencing batch reactor (SBR) is used to treat landfill leachate containing high concentration of ammonium nitrogen with municipal fecal supernatant. The SBR system is operated in the following sequential phases: fill period, anoxic period, aeration period, settling period, decant and idle period. The results indicated that the average removal efficiencies of COD, BOD5, TN, NH 4+-N were 93.76%, 98.28%, 84.74% and 99.21%, respectively. The average sludge removal loading rates of COD, BOD5, TN and NH 4+-N were 0.24 kg/(kg SS?d), 0.08 kg/(kg SS?d), 0.04 kg/(kg SS?d) and 0.036 kg/(kg SS?d), respectively. Highly effective simultaneous nitrification and denitrification was achieved in the SBR system. The ratio of nitrification and denitrification was 99% and 84%, respectively. There was partial NO?2 denitrification in the system.

Simultaneous removal of nitrogen and phosphorus from swine wastewater in a sequencing batch biofilm reactor

In this study, the performance of a sequencing batch biofilm reactor(SBBR) for removal of nitrogen and phosphorus from swine wastewater was evaluated. The replacement rate of wastewater was set at 12.5% throughout the experiment. The anaerobic and aerobic times were 3 h and 7 h, respectively, and the dissolved oxygen concentration of the aerobic phase was about 3.95 mg·L-1. The SBBR process demonstrated good performance in treating swine wastewater. The percentage removal of total chemical oxygen demand(COD), ammonia nitrogen(NH4+-N), total nitrogen(TN), and total phosphorus(TP) was 98.2%, 95.7%, 95.6%, and 96.2% at effluent concentrations of COD85.6 mg·L-1, NH4+-N 35.22 mg·L-1, TN 44.64 mg·L-1, and TP 1.13 mg·L-1, respectively. Simultaneous nitrification and denitrification phenomenon was observed. Further improvement in removal efficiency of NH4+-N and TN occurred at COD/TN ratio of 11:1, with effluent concentrations at NH4+-N 18.5 mg·L-1and TN 34 mg·L-1, while no such improvement in COD and TP removal was found. Microbial electron microscopy analysis showed that the filler surface was covered with a thick biofilm, forming an anaerobic–aerobic microenvironment and facilitating the removal of nitrogen, phosphorus and organic matters. A long-term experiment(15 weeks) showed that stable removal efficiency for N and P could be achieved in the SBBR system.

Impact of salinity on treatment of saline wastewater by sequencing batch biofilm reactor process

High salinity industrial wastewater is difficult to treat using biological treatment system because of the high concentrations of salt.The potential of a sequencing batch biofilm reactor(SBBR)process in treating synthetic high salinity wastewater was evaluated at laboratory scale during a 110-day operation.The reactor was operated in a 12 h cycle,and each cycle consisted of 0.25 h influent addition,8 h aeration,3 h anoxic reaction,0.5 h sedimentation and 0.25 h effluent withdrawal.Gradual increase in salinity gradient was applied during the acclimatization period.The acclimated SBBR system was demonstrated to be an effective process to remove organic compounds and ammonia nitrogen under high salinity conditions with chemical oxygen demand(COD)and ammonia nitrogen(NH3-N)removal efficiencies of 88% and 80%,respectively.The microscopic examination indicated that rather than rotifers or vorticella,the zoogloea,filamentous fungus mingled with a small quantity of swimming infusorians were dominant bacteria in SBBR system.The removal efficiencies close to 80% in COD and 75% in NH3-N were achieved at an organic loading rate(OLR)of 0.96 kg COD/(m3·d),pH of 7.0,salinity of 14 g/L and NH3-N of 30 mg/L.

Dyestuff wastewater treatment by combined SDS-CuO/TiO_2 photocatalysis and sequencing batch reactor

Combined technology of SDS-CuO/TiO2 photocatalysis and sequencing batch reactor （SBR） were applied to treating dyestuff wastewater. Photocatalysis was carried out in a spiral up-flow type reactor as pre-treatment. SDS-CuO/TiO2 photocatalyst was prepared by modification of nano-TiO2 using CuO and sodium dodecyl sulfate （SDS）. Results show that the SDS-CuO/TiO2 photocatalyst contains two kinds of crystals, including TiO2 and CuO. The band gap of this photocatalyst is 1.56 eV, indicating that it can be excited by visible light （2〈794.87 nm）. And characterization also shows that there are alkyl groups on its surface. It takes 40 rain to improve the biodegradability of dyestuff wastewater. Five-day biochemical oxygen demand （BODs） and dehydrogenase activity （DHA） of wastewater reach the maximum value when dissolved oxygen is higher than 2.97 mg/L. SBR reactor was used to treat this biodegradability improved wastewater. Chemical oxygen demand （COD） and colority decline to 72 mg/L and 20 times, respectively, when the sludge loading is 0.179 kg（COD）/[kg（MLSS）＇d], dissolved oxygen is 4.09 mg/L and aeration time is 10 h.

In-depth observations of fermentative hydrogen production from liquid swine manure using an anaerobic sequencing batch reactor

In this study,experiments were designed to reveal in-depth information of the effect of pH and hydraulic retention time（HRT）on biohydrogen fermentation from liquid swine manure supplemented with glucose using an Anaerobic Sequencing Batch Reactor（ASBR）System.Five values of HRT（8,12,16,20,and 24 h）were first tested and the best HRT determined was further studied at five p H levels（4.4,4.7,5.0,5.3,and 5.6）.The results showed that for HRT 24 h,there was a dividing H2 content（around 37%）related to the total biogas production rate for the ASBR System running at p H 5.0.When the H2 content went beyond 37%,an appreciable decline in biogas production rate was observed,implying that there might exist an H2 content limit in the biogas.For other HRTs（8 through 20 h）,an average H2 content of 42%could be achieved.In the second experiment（HRT 12 h）,the highest H2 content（35%）in the biogas was found to be associated with p H 5.0.The upswing of p H from 5.0 to 5.6 had a significantly more impact on biogas H2 content than the downswing of p H from5.0 to 4.3.The results also indicated good linear relationships of biogas and H2 production rates with HRT（r=0.9971 and0.9967,respectively）.Since the optimal ASBR operating conditions were different for the biogas/H2 production rates and the H2 yield,a compromised combination of the running parameters was determined to be HRT 12 h and pH 5.0 in order to achieve good biogas/H2 productions.

Simultaneous Nitrogen and Phosphorus Removal by Denitrifying Dephosphatation in a (AO)_2 Sequencing Batch Reactor

A 24 L working volume reactor was used for the research on simultaneous phosphorus (P) and nitrogen (N) removal by denitrifying dephosphatation in an anaerobic-oxid-anoxic-oxid sequencing batch reactor ((AO)_2SBR) system. The durations of each phase are: anaerobic 1.5 h, aerobic 2.5 h, anoxic 1.5 h, post-aerobic 0.5 h, settling 1.0 h, fill 0.5 h. The successful removal of nitrogen and phosphorus is achieved in a stable (AO)_2SBR. The effluent P concentrations is below 1 mg/L, and the COD,TN and P average removal efficiency is 88.9%, 77.5% and 88.7%, respectively. The batch experiment results show that the durations of aerobic and anoxic phase influence the P removal efficiency. Some feature points are found on the DO, ORP and pH curves to demonstrate the complete of phosphate release and phosphate uptake. These feature points can be used for the control of (AO)_2 SBR.

Treatment of Practical Dye Wastewater Using a Double Dielectric Barrier Discharge System Combined with a Sequencing Batch Reactor System

Synthetic dyes are substances that are relatively stable and difficult to degrade in wastewater treatment plants using normal physical,chemical or / and biological treatment. The present work explored the synergistic effect of non-thermal plasma( NTP) and biological wastewater treatment technologies on practical dye wastewater degradation by establishing a double dielectric barrier discharge( DDBD) system combined with a sequencing batch reactor( SBR) system. The biodegradation and degradation efficiency of the DDBD-SBR system was investigated. The investigation results indicated that the DDBD technology was effective in treating the practical dye wastewater as a pre-treatment process. After a 10-min treatment,although the total organic carbon( TOC) removal efficiency was not so significant, the decolouration and the biodegradation were improved greatly. The microbial toxicity test revealed that the sample after degradation became less toxic than the original dye,which demonstrated the treatment had a significant effect on the reduction of toxicity. In addition,the SBR technology remedied the defects of DDBD treatment and improved TOC removal efficiency noticeably. The hybrid DDBD-SBR system made full use of the advantages of the individual technologies and exhibited an efficient capability for practical dye wastewater treatment.

Function of anaerobic portion in a conventional sequencing batch reactor

The performance of SBRs treating two kinds of wastewater(synthetic wastewater con- taining polyvinyl alcohol and effluent from a coke-plant wastewater treatment system)was investi- gated in this study,in order to examine the exact function of anaerobic portion in a conventional SBR.The set up of 4-or 8-hour anaerobic mixing period in a SBR's cycle did not benefit for PVA degradation.While an anaerobic reactor seeded with anaerobic sludge could partly hydrolyse and acidify PVA into readily-degradable intermediates.During the anaerobic fill period of an SBR treat- ing the effluent from a coke-plant wastewater treatment system,the organic concentration was re- duced to certain extent due to the adsorption of activated sludge and dilution of the mixed liquor from the previous cycle.Parts of readily-degradable organics in the influent were utilised by denitri- fiers as carbon source.The biomass in a conventional SBR was alternatively imposed to aerobic and anaerobic conditions in its operating cycle,the environmental conditions needed for anaerobic hy- drolization and acidification of refractory organics could not occur in such an SBR.

Treatment of Wastewater with Modified Sequencing Batch Biofilm Reactor Technology

This paper describes the removal of COD and nitrogen from wastewater with modified sequencing batch biofilm reactor. The strategy of simultaneous feeding and draining was explored.The results show that introduction of a new batch of wastewater and withdrawal of the purified water can be conducted simultaneously with the maximum volumetric exchange rate of about 70%.Application of this feeding and draining mode leads to the reduction of the cycle time, the increase of the utilization of the reactor volume and the simplification of the reactor structure. The treatment of a synthetic wastewater containing COD and nitrogen was investigated. The operation mode of F(D) O ( i.e ., simultaneous feeding and draining followed by the aerobic condition) was adopted. It was found that COD was degraded very fast in the initial reaction period of time, then reduced slowly and the ammonia nitrogen and nitrate nitrogen concentrations decreased and increased with time respectively, while the nitrite nitrogen level increased first and then reduced. The relationship between the COD or ammonia nitrogen loading and its removal rate was examined, and the removal of COD, ammonia nitrogen and total nitrogen could exceed 95%, 90% and 80% respectively. The fact that nitrogen could be removed more completely under constant aeration (aerobic condition) of the SBBR operation mode is very interesting and could be explained in several respects.

Research Development and Application of Nitrogen and Phosphorus Removal in Sequencing Batch Biofilm Reactor

Frequent variations of the wastewater quality and quantity and other uncertain factors are the challenges faced by many wastewater treatment plants during the operation. Sequencing batch biofilm reactor（ SBBR） process provides a new idea for an effective solution to this problem. This paper introduces the basic processes and characteristics of the sequencing batch biofilm reactor（ SBBR） process,and summarizes the research status of this process in wastewater treatment. Factors affecting the nitrogen and phosphorus removal effect of the SBBR process are also analyzed.

Production of Poly-b-hydroxybutyrate by Activated Sludge in Sequencing Batch Reactor under Aerobic Conditions

In order to improve poly-β-hydroxybutyrate（PHB） production in activated sludge, the anaerobic/aerobic alternative operating sequencing batch reactor（SBR） process was applied in this paper to accumulate PHB. Effects of nutritional conditions and carbon concentration on PHB accumulation were studied. Results indicated that PHB accumulation reached the highest level and accounted for 11.2 % under anaerobic condition for phosphate limitation and 20.84 % under aerobic condition for nitrogen and phosphate limitation of mixed liquor suspended solid（MLSS）, respectively. In addition, 4 g/L was proved to be the optimum carbon concentration in both anaerobic and aerobic experiments, and the PHB accumulation reached 17.1 %（anaerobic, phosphorus limitation） and 60.4 %（aerobic, nitrogen and phosphorus limitation） of MLSS, respectively. PHB could be successfully extracted with sodium hypochlorite and chloroform method from the activated sludge. In addition, the infrared spectrum showed that the PHB sample extracted was of high purity.

Performance of Sequencing Biofilm Batch Reactor(SBBR) under Micro-aerobic Condition for Aniline-Contaminated Wastewater Treatment

The performance of sequencing biofilm batch reactor( SBBR) under micro-aerobic condition for aniline-contaminated wastewater treatment was investigated in this study. Dissolved oxygen( DO) and aniline concentrations were selected as the operating variables to analyze,model,and optimize the process. In order to analyze the process,5 dependent parameters,chemical oxygen demand( COD),aniline,ammonium,total nitrogen( TN),and total phosphorous( TP) removal as the process responses were studied. From the results, increase in DO concentration could promote the removal of COD,aniline,ammonium,and TN,while increase in aniline concentration has a slightly negative impact on the removal of pollutants. The optimum DO concentration was found to be 0. 4-0. 5 mg /L. The removal efficiencies for COD,aniline,ammonium,and TN at the optimum point( DO concentration0. 5 mg /L,aniline concentration 11 mg /L) were 95. 84%,100%,75. 72%,and 45. 39%,respectively. The oxidative deamination was the main degradation method for aniline under micro-aerobic condition. Simultaneously nitrification-denitrification( SND)process performed under micro-aerobic condition and about 20%-40% nitrogen was removed by SND.

Study on the Effect of Variation of Flow in Sequencing Batch Reactor Using PCA and ANOVA

Wastewater treatment using Sequencing Batch Reactor (SBR) technology is one of the state-of-the art wastewater management systems. In this technology equalization, biological treatment and secondary clarification are performed in a single reactor in a time control sequence. SBR system is idler for the areas where the available land is limited, since it operates in less space and very cost effective even on small scales. The control of the operational parameters during the process of biological wastewater treatment is often complicated due to the dynamic change in the composition and characteristics of the raw wastewater, flow rates and other parameters influencing the complex nature of the treatment process and the process in SBR has a unique cyclic batch operation. The performance of the SBR was studied using pilot and real plant at Puducherry. The parameters considered in this study are flow, Mixed Liquor Suspended Solids (MLSS), pH, temperature, influent and effluent of Total Suspended Solids (TSS), Biochemical Oxygen Demand (BOD) and Chemical Oxygen Demand (COD). As a part of the study, the effect of constant flow and varying flow on the organic loading of the influent TSS, BOD and COD and their influence on the organic load of the effluent parameters were examined to identify the level of significance of the parameters in relation to the flow. The impact of flow on other parameters was also examined. The experimental data obtained from pilot and real plants were analyzed using multi variate statistical analyses like correlation analysis, Principal Component Analysis (PCA) and Analysis of variance (ANOVA). The statistical analysis revealed that constant flow had no significant role and the influent parameters alone had the critical role, whereas varying flow as well as the influent parameters had the significant role on the performance of SBR.