An Innovative Deep Architecture for Flight Safety Risk Assessment Based on Time Series Data

With the development of the integration of aviation safety and artificial intelligence,research on the combination of risk assessment and artificial intelligence is particularly important in the field of risk management,but searching for an efficient and accurate risk assessment algorithm has become a challenge for the civil aviation industry.Therefore,an improved risk assessment algorithm(PS-AE-LSTM)based on long short-term memory network(LSTM)with autoencoder(AE)is proposed for the various supervised deep learning algorithms in flight safety that cannot adequately address the problem of the quality on risk level labels.Firstly,based on the normal distribution characteristics of flight data,a probability severity(PS)model is established to enhance the quality of risk assessment labels.Secondly,autoencoder is introduced to reconstruct the flight parameter data to improve the data quality.Finally,utilizing the time-series nature of flight data,a long and short-termmemory network is used to classify the risk level and improve the accuracy of risk assessment.Thus,a risk assessment experimentwas conducted to analyze a fleet landing phase dataset using the PS-AE-LSTMalgorithm to assess the risk level associated with aircraft hard landing events.The results show that the proposed algorithm achieves an accuracy of 86.45%compared with seven baseline models and has excellent risk assessment capability.

Comparative Analysis of Climatic Change Trend and Change-Point Analysis for Long-Term Daily Rainfall Annual Maximum Time Series Data in Four Gauging Stations in Niger Delta

The aim of this study is to establish the prevailing conditions of changing climatic trends and change point dates in four selected meteorological stations of Uyo, Benin, Port Harcourt, and Warri in the Niger Delta region of Nigeria. Using daily or 24-hourly annual maximum series (AMS) data with the Indian Meteorological Department (IMD) and the modified Chowdury Indian Meteorological Department (MCIMD) models were adopted to downscale the time series data. Mann-Kendall (MK) trend and Sen’s Slope Estimator (SSE) test showed a statistically significant trend for Uyo and Benin, while Port Harcourt and Warri showed mild trends. The Sen’s Slope magnitude and variation rate were 21.6, 10.8, 6.00 and 4.4 mm/decade, respectively. The trend change-point analysis showed the initial rainfall change-point dates as 2002, 2005, 1988, and 2000 for Uyo, Benin, Port Harcourt, and Warri, respectively. These prove positive changing climatic conditions for rainfall in the study area. Erosion and flood control facilities analysis and design in the Niger Delta will require the application of Non-stationary IDF modelling.

A Survey of Time Series Data Visualization Methods

In the era of big data,the general public is more likely to access big data,but they wouldn’t like to analyze the data.Therefore,the traditional data visualization with certain professionalism is not easy to be accepted by the general public living in the fast pace.Under this background,a new general visualization method for dynamic time series data emerges as the times require.Time series data visualization organizes abstract and hard-to-understand data into a form that is easily understood by the public.This method integrates data visualization into short videos,which is more in line with the way people get information in modern fast-paced lifestyles.The modular approach also facilitates public participation in production.This paper summarizes the dynamic visualization methods of time series data ranking,studies the relevant literature,shows its value and existing problems,and gives corresponding suggestions and future research prospects.

Time-Series Data and Analysis Software of Connected Vehicles

In this study,we developed software for vehicle big data analysis to analyze the time-series data of connected vehicles.We designed two software modules:The rst to derive the Pearson correlation coefcients to analyze the collected data and the second to conduct exploratory data analysis of the collected vehicle data.In particular,we analyzed the dangerous driving patterns of motorists based on the safety standards of the Korea Transportation Safety Authority.We also analyzed seasonal fuel efciency(four seasons)and mileage of vehicles,and identied rapid acceleration,rapid deceleration,sudden stopping(harsh braking),quick starting,sudden left turn,sudden right turn and sudden U-turn driving patterns of vehicles.We implemented the density-based spatial clustering of applications with a noise algorithm for trajectory analysis based on GPS(Global Positioning System)data and designed a long shortterm memory algorithm and an auto-regressive integrated moving average model for time-series data analysis.In this paper,we mainly describe the development environment of the analysis software,the structure and data ow of the overall analysis platform,the conguration of the collected vehicle data,and the various algorithms used in the analysis.Finally,we present illustrative results of our analysis,such as dangerous driving patterns that were detected.

Outliers Mining in Time Series Data Sets

In this paper, we present a cluster-based algorithm for time series outlier mining.We use discrete Fourier transformation (DFT) to transform time series from time domain to frequency domain. Time series thus can be mapped as the points in k -dimensional space.For these points, a cluster-based algorithm is developed to mine the outliers from these points.The algorithm first partitions the input points into disjoint clusters and then prunes the clusters,through judgment that can not contain outliers.Our algorithm has been run in the electrical load time series of one steel enterprise and proved to be effective.

The Multisource Time Series Data Granularity Conversion Method

Granular information has emerged as a potent tool for data represen-tation and processing across various domains.However,existing time series data granulation techniques often overlook the influence of external factors.In this study,a multisource time series data granularity conversion model is proposed that achieves granularity conversion effectively while maintaining result consis-tency and stability.The model incorporates the impact of external source data using a multivariate linear regression model,and the entropy weighting method is employed to allocate weights andfinalize the granularity conversion.Through experimental analysis using Beijing’s 2022 air quality dataset,our proposed method outperforms traditional information granulation approaches,providing valuable decision-making insights for industrial system optimization and research.

Research on Multi-Modal Time Series Data Prediction Method Based on Dual-Stage Attention Mechanism

The production data in the industrialfield have the characteristics of multimodality,high dimensionality and large correlation differences between attributes.Existing data prediction methods cannot effectively capture time series and modal features,which leads to prediction hysteresis and poor prediction stabil-ity.Aiming at the above problems,this paper proposes a time-series and modal fea-tureenhancementmethodbasedonadual-stageself-attentionmechanism(DATT),and a time series prediction method based on a gated feedforward recurrent unit(GFRU).On this basis,the DATT-GFRU neural network with a gated feedforward recurrent neural network and dual-stage self-attention mechanism is designed and implemented.Experiments show that the prediction effect of the neural network prediction model based on DATT is significantly improved.Compared with the traditional prediction model,the DATT-GFRU neural network has a smaller aver-age error of model prediction results,stable prediction performance,and strong generalization ability on the three datasets with different numbers of attributes and different training sample sizes.

Wind and Photovoltaic Power Time Series Data Aggregation Method Based on an Ensemble Clustering and Markov Chain

Reducing the input wind and photovoltaic power time series data can improve the efficiency of time sequential simulations.In this paper,a wind and photovoltaic power time series data aggregation method based on an ensemble clustering and Markov chain(ECMC)is proposed.The ECMC method can effectively reduce redundant information in the data.First,the wind and photovoltaic power time series data were divided into scenarios,and ensemble clustering was used to cluster the divided scenarios.At the same time,the Davies-Bouldin Index(DBI)is adopted to select the optimal number of clusters.Then,according to the temporal correlation between wind and photovoltaic scenarios,the wind and photovoltaic clustering results are merged and reduced to form a set of combined typical day scenarios that can reflect the characteristics of historical data within the calculation period.Finally,based on the Markov Chain,the state transition probability matrix of various combined typical day scenarios is constructed,and the aggregation state sequence of random length is generated,and then,the combined typical day scenarios of wind and photovoltaic were sampled in a sequential one-way sequence according to the state sequence and then are built into a representative wind and photovoltaic power time series aggregation sequence.A provincial power grid was chosen as an example to compare the multiple evaluation indexes of different aggregation methods.The results show that the ECMC aggregation method improves the accuracy and efficiency of time sequential simulations.

An improved morphological weighted dynamic similarity measurement algorithm for time series data

Purpose–The similarity measurement of time series is an important research in time series detection,which is a basic work of time series clustering,anomaly discovery,prediction and many other data mining problems.The purpose of this paper is to design a new similarity measurement algorithm to improve the performance of the original similarity measurement algorithm.The subsequence morphological information is taken into account by the proposed algorithm,and time series is represented by a pattern,so the similarity measurement algorithm is more accurate.Design/methodology/approach–Following some previous researches on similarity measurement,an improved method is presented.This new method combines morphological representation and dynamic time warping(DTW)technique to measure the similarities of time series.After the segmentation of time series data into segments,three parameter values of median,point number and slope are introduced into the improved distance measurement formula.The effectiveness of the morphological weighted DTW algorithm(MW-DTW)is demonstrated by the example of momentum wheel data of an aircraft attitude control system.Findings–The improved method is insensitive to the distortion and expansion of time axis and can be used to detect the morphological changes of time series data.Simulation results confirm that this method proposed in this paper has a high accuracy of similarity measurement.Practical implications–This improved method has been used to solve the problem of similarity measurement in time series,which is widely emerged in different fields of science and engineering,such as the field of control,measurement,monitoring,process signal processing and economic analysis.Originality/value–In the similarity measurement of time series,the distance between sequences is often used as the only detection index.The results of similarity measurement should not be affected by the longitudinal or transverse stretching and translation changes of the sequence,so it is necessary to incorporate themorphological changes of the sequence into similarity measurement.The MW-DTW is more suitable for the actual situation.At the same time,the MW-DTW algorithm reduces the computational complexity by transforming the computational object to subsequences.

Discussion on the paper “Analyzing short time series data from periodically fluctuating rodent populations by threshold models: A nearestblock bootstrap approach”

The authors are to be congratulated for an innovative paper in terms of both modelling methodology and subject matter significance. The analysis of short time series is known to be

Discussion on the paper “Analyzing short time series data from periodically fluctuating rodent populations by threshold models: A nearestblock bootstrap approach”

This is a very attractive article. It combines fascinating new methodology with a most interesting dataset, and a highly motivating presentation. However, despite the many

Effect of calibration data series length on performance and optimal parameters of hydrological model

In order to assess the effects of calibration data series length on the performance and optimal parameter values of a hydrological model in ungauged or data-limited catchments （data are non-continuous and fragmental in some catchments）, we used non-continuous calibration periods for more independent streamflow data for SIMHYD （simple hydrology） model calibration. Nash-Sutcliffe efficiency and percentage water balance error were used as performance measures. The particle swarm optimization （PSO） method was used to calibrate the rainfall-runoff models. Different lengths of data series ranging from one year to ten years, randomly sampled, were used to study the impact of calibration data series length. Fifty-five relatively unimpaired catchments located all over Australia with daily precipitation, potential evapotranspiration, and streamflow data were tested to obtain more general conclusions. The results show that longer calibration data series do not necessarily result in better model performance. In general, eight years of data are sufficient to obtain steady estimates of model performance and parameters for the SIMHYD model. It is also shown that most humid catchments require fewer calibration data to obtain a good performance and stable parameter values. The model performs better in humid and semi-humid catchments than in arid catchments. Our results may have useful and interesting implications for the efficiency of using limited observation data for hydrological model calibration in different climates.

Generalized unscented Kalman filtering based radial basis function neural network for the prediction of ground radioactivity time series with missing data

On the assumption that random interruptions in the observation process are modeled by a sequence of independent Bernoulli random variables, we firstly generalize two kinds of nonlinear filtering methods with random interruption failures in the observation based on the extended Kalman filtering （EKF） and the unscented Kalman filtering （UKF）, which were shortened as GEKF and CUKF in this paper, respectively. Then the nonlinear filtering model is established by using the radial basis function neural network （RBFNN） prototypes and the network weights as state equation and the output of RBFNN to present the observation equation. Finally, we take the filtering problem under missing observed data as a special case of nonlinear filtering with random intermittent failures by setting each missing data to be zero without needing to pre-estimate the missing data, and use the GEKF-based RBFNN and the GUKF-based RBFNN to predict the ground radioactivity time series with missing data. Experimental results demonstrate that the prediction results of GUKF-based RBFNN accord well with the real ground radioactivity time series while the prediction results of GEKF-based RBFNN are divergent.

Non-Stationary Trend Change Point Pattern Using 24-Hourly Annual Maximum Series (AMS) Precipitation Data

This paper mainly investigated the basic information about non-stationary trend change point patterns. After performing the investigation, the corresponding results show the existence of a trend, its magnitude, and change points in 24-hourly annual maximum series (AMS) extracted from monthly maximum series (MMS) data for thirty years (1986-2015) rainfall data for Uyo metropolis. Trend analysis was performed using Mann-Kendall (MK) test and Sen’s slope estimator (SSE) used to obtain the trend magnitude, while the trend change point analysis was conducted using the distribution-free cumulative sum test (CUSUM) and the sequential Mann-Kendall test (SQMK). A free CUSUM plot date of change point of rainfall trend as 2002 at 90% confidence interval was obtained from where the increasing trend started and became more pronounced in the year 2011, another change point year from the SQMK plot with the trend intensifying. The SSE gave an average rate of change in rainfall as 2.1288 and 2.16 mm/year for AMS and MMS time series data respectively. Invariably, the condition for Non-stationary concept application is met for intensity-duration-frequency modeling.

Series Statistics Data of Non-ferrous Metals of China──Ⅰ Surveying

ＳｅｒｉｅｓＳｔａｔｉｓｔｉｃｓＤａｔａｏｆＮｏｎ－ｆｅｒｒｏｕｓＭｅｔａｌｓｏｆＣｈｉｎａⅠ２ＡＳｕｒｖｅｙｉｎｇｏｆＴｈｅＣｈｉｎａＮａｔｉｏｎａｌＮｏｎ－ｆｅｒｒｏｕｓＭｅｔａｌｓＩｎｄｕｓｔｒｙＣｏｒｐｃｒａｔｉｏｎ（ＣＮＮＣ）Ｂｙｃｏｕｒｔ...

Determination of Kolmogorov Entropy of Chaotic Attractor Included in One-Dimensional Time Series of Meteorological Data

The 1970-1985 day to day averaged pressure dataset of Shanghai and the extension method in phase space are used to calculate the correlation dimension D and the second-order Renyi entropy K2 of the approximation of Kolmogorov's entropy, the fractional dimension D = 7.7-7.9 and the positive value K2 - 0.1 are obtained. This shows that the attractor for the short-term weather evolution in the monsoon region of China exhibits a chaotic motion. The estimate of K2 yields a predictable time scale of about ten days. This result is in agreement with that obtained earlier by the dynamic-statistical approach.The effects of the lag time i on the estimate of D and K2 are investigated. The results show that D and K2 are convergent with respect to i. The day to day averaged pressure series used in this paper are treated for the extensive phase space with T = 5, the coordinate components are independent of each other; therefore, the dynamical character quantities of the system are stable and reliable.

Generating Synthetic Data to Reduce Prediction Error of Energy Consumption

Renewable and nonrenewable energy sources are widely incorporated for solar and wind energy that produces electricity without increasing carbon dioxide emissions.Energy industries worldwide are trying hard to predict future energy consumption that could eliminate over or under contracting energy resources and unnecessary financing.Machine learning techniques for predicting energy are the trending solution to overcome the challenges faced by energy companies.The basic need for machine learning algorithms to be trained for accurate prediction requires a considerable amount of data.Another critical factor is balancing the data for enhanced prediction.Data Augmentation is a technique used for increasing the data available for training.Synthetic data are the generation of new data which can be trained to improve the accuracy of prediction models.In this paper,we propose a model that takes time series energy consumption data as input,pre-processes the data,and then uses multiple augmentation techniques and generative adversarial networks to generate synthetic data which when combined with the original data,reduces energy consumption prediction error.We propose TGAN-skip-Improved-WGAN-GP to generate synthetic energy consumption time series tabular data.We modify TGANwith skip connections,then improveWGANGPby defining a consistency term,and finally use the architecture of improved WGAN-GP for training TGAN-skip.We used various evaluation metrics and visual representation to compare the performance of our proposed model.We also measured prediction accuracy along with mean and maximum error generated while predicting with different variations of augmented and synthetic data with original data.The mode collapse problemcould be handled by TGAN-skip-Improved-WGAN-GP model and it also converged faster than existing GAN models for synthetic data generation.The experiment result shows that our proposed technique of combining synthetic data with original data could significantly reduce the prediction error rate and increase the prediction accuracy of energy consumption.

Application of a Bayesian method to data-poor stock assessment by using Indian Ocean albacore (Thunnus alalunga) stock assessment as an example

It is widely recognized that assessments of the status of data-poor fish stocks are challenging and that Bayesian analysis is one of the methods which can be used to improve the reliability of stock assessments in data-poor situations through borrowing strength from prior information deduced from species with good-quality data or other known information. Because there is considerable uncertainty remaining in the stock assessment of albacore tuna（Thunnus alalunga） in the Indian Ocean due to the limited and low-quality data, we investigate the advantages of a Bayesian method in data-poor stock assessment by using Indian Ocean albacore stock assessment as an example. Eight Bayesian biomass dynamics models with different prior assumptions and catch data series were developed to assess the stock. The results show（1） the rationality of choice of catch data series and assumption of parameters could be enhanced by analyzing the posterior distribution of the parameters;（2） the reliability of the stock assessment could be improved by using demographic methods to construct a prior for the intrinsic rate of increase（r）. Because we can make use of more information to improve the rationality of parameter estimation and the reliability of the stock assessment compared with traditional statistical methods by incorporating any available knowledge into the informative priors and analyzing the posterior distribution based on Bayesian framework in data-poor situations, we suggest that the Bayesian method should be an alternative method to be applied in data-poor species stock assessment, such as Indian Ocean albacore.

CT-NET: A Novel Convolutional Transformer-Based Network for Short-Term Solar Energy Forecasting Using Climatic Information

Photovoltaic(PV)systems are environmentally friendly,generate green energy,and receive support from policies and organizations.However,weather fluctuations make large-scale PV power integration and management challenging despite the economic benefits.Existing PV forecasting techniques(sequential and convolutional neural networks(CNN))are sensitive to environmental conditions,reducing energy distribution system performance.To handle these issues,this article proposes an efficient,weather-resilient convolutional-transformer-based network(CT-NET)for accurate and efficient PV power forecasting.The network consists of three main modules.First,the acquired PV generation data are forwarded to the pre-processing module for data refinement.Next,to carry out data encoding,a CNNbased multi-head attention(MHA)module is developed in which a single MHA is used to decode the encoded data.The encoder module is mainly composed of 1D convolutional and MHA layers,which extract local as well as contextual features,while the decoder part includes MHA and feedforward layers to generate the final prediction.Finally,the performance of the proposed network is evaluated using standard error metrics,including the mean squared error(MSE),root mean squared error(RMSE),and mean absolute percentage error(MAPE).An ablation study and comparative analysis with several competitive state-of-the-art approaches revealed a lower error rate in terms of MSE(0.0471),RMSE(0.2167),and MAPE(0.6135)over publicly available benchmark data.In addition,it is demonstrated that our proposed model is less complex,with the lowest number of parameters(0.0135 M),size(0.106 MB),and inference time(2 ms/step),suggesting that it is easy to integrate into the smart grid.

Addressing the Challenge of Interpreting Microclimatic Weather Data Collected from Urban Sites

This paper presents some installation and data analysis issues from an ongoing urban air temperature and humidity measurement campaign in Hangzhou and Ningbo, China. The location of the measurement sites, the positioning of the sensors and the harsh conditions in an urban environment can result in missing values and observations that are unrepresentative of the local urban microclimate. Missing data and erroneous values in micro-scale weather time series can produce bias in the data analysis, false correlations and wrong conclusions when deriving the specific local weather patterns. A methodology is presented for the identification of values that could be false and for determining whether these are “noise”. Seven statistical methods were evaluated in their performance for replacing missing and erroneous values in urban weather time series. The two methods that proposed replacement with the mean values from sensors in locations with a Sky View Factor similar to that of the target sensor and the sensors closest to the target’s location performed well for all Day-Night and Cold-Warm days scenarios. However, during night time in warm weather the replacement with the mean values for air temperature of the nearest locations outperformed all other methods. The results give some initial evidence of the distinctive urban microclimate development in time and space under different regional weather forcings.