A Brief Review of High Entropy Alloys and Serration Behavior and Flow Units

Multicomponent alloys with high entropy of mixing,e.g.,high entropy alloys（HEAs）and/or multiprincipal-element alloys（MEAs）,are attracting increasing attentions,because the materials with novel properties are being developed,based on the design strategy of the equiatomic ratio,multicomponent,and high entropy of mixing in their liquid or random solution state.Recently,HEAs with the ultrahigh strength and fracture toughness,excellent magnetic properties,high fatigue,wear and corrosion resistance,great phase stability/high resistance to heat-softening behavior,sluggish diffusion effects,and potential superconductivity,etc.,were developed.The HEAs can even have very high irradiation resistance and may have some self-healing effects,and can potentially be used as the first wall and nuclear fuel cladding materials.Serration behaviors and flow units are powerful methods to understand the plastic deformation or fracture of materials.The methods have been successfully used to study the plasticity of amorphous alloys（also bulk metallic glasses,BMGs）.The flow units are proposed as：free volumes,shear transition zones（STZs）,tension-transition zones（TTZs）,liquid-like regions,soft regions or soft spots,etc.The flow units in the crystalline alloys are usually dislocations,which may interact with the solute atoms,interstitial types,or substitution types.Moreover,the flow units often change with the testing temperatures and loading strain rates,e.g.,at the low temperature and high strain rate,plastic deformation will be carried out by the flow unit of twinning,and at high temperatures,the grain boundary will be the weak area,and play as the flow unit.The serration shapes are related to the types of flow units,and the serration behavior can be analyzed using the power law and modified power law.

Correlation between deformation behavior and atomic-scale heterogeneity in Fe-based bulk metallic glasses

The correlation betweent deformation behavior and atomic-scale heterogeneity of bulk metallic glasses(BMGs)is critical to understand the BMGs'deformation mechanism.In this work,three typical[(Fe_(0.5)Co_(0.5))_(0.75)B_(0.2)Si_(0.05)]_(96)Nb_4,Fe_(39)Ni_(39)B_(14.2)Si_(2.75)P_(2.75)Nb_(2.3),and Fe_(50)Ni_(30)P_(13)C_(7)BMGs exhibiting different plasticity were selected,and the correlation between deformation behavior and atomic-scale heterogeneity of Fe-based BMGs was studied.It is found that the serrated flow dynamics of Fe-based BMGs transform from chaotic state to self-organized critical state with increasing plasticity.This transformation is attributed to the increasing atomic-scale heterogeneity caused by the increasing free volume and short-to-medium range order,which facilitates a higher frequency of interaction and multiplication of shear bands,thereby results in a brittle to ductile transition in Fe-based BMGs.This work provides new evidence on heterogeneity in plastic Fe-based BMGs from the aspects of atomic-scale structure,and provides new insight into the plastic deformation of Fe-based BMGs.

Self-organized Criticality Behavior in Bulk Metallic Glasses

Serrated flows are known as repeated yielding of bulk metallic glasses（BMGs）during plastic deformation under different loading conditions,which are associated with the operation of shear banding.According to the statistics of some parameters,the shear avalanches can display a self-organized critical state,suggesting a large ductility of BMGs.The emergence of the self-organized criticality（SOC）behavior in different BMGs is due to the temperature,strain rate,and chemical compositions.The SOC behavior is accompanied with the following phenomena：the interactions occur in the shear bands;the incubation time is longer than the relaxation time;the time interval is lacking of typical time scale;and the spatial or temporal parameters should display apower-law distribution.

Serration and Noise Behavior in Advanced Materials

The Chinese Materials Research Society（C-MRS）Conference（2015）was held in the Guizhou Park Hotel International Conference Center,Guiyang,China,from July 10-14,2015.This conference consists of 30symposia,including 4international symposia.As one of 4international symposia,＂Serration and noise behavior in advanced materials＂