BACKGROUND Although en bloc dissection of hepatic hilum lymph nodes has many advantages in radical tumor treatment,the feasibility and safety of this approach for laparo-scopic pancreaticoduodenectomy(LPD)require furt...BACKGROUND Although en bloc dissection of hepatic hilum lymph nodes has many advantages in radical tumor treatment,the feasibility and safety of this approach for laparo-scopic pancreaticoduodenectomy(LPD)require further clinical evaluation and investigation.AIM To explore the application value of the"five steps four quadrants"modularized en bloc dissection technique for accessing hepatic hilum lymph nodes in LPD patients.METHODS A total of 52 patients who underwent LPD via the"five steps four quadrants"modularized en bloc dissection technique for hepatic hilum lymph nodes from April 2021 to July 2023 in our department were analyzed retrospectively.The patients'body mass index(BMI),preoperative laboratory indices,intraoperative variables and postoperative complications were recorded.The relationships between preoperative data and intraoperative lymph node dissection time and blood loss were also analyzed.RESULTS Among the 52 patients,36 were males and 16 were females,and the average age was 62.2±11.0 years.There were 26 patients with pancreatic head cancer,16 patients with periampullary cancer,and 10 patients with distal bile duct cancer.The BMI was 22.3±3.3 kg/m²,and the median total bilirubin(TBIL)concentration was 57.7(16.0-155.7)µmol/L.All patients successfully underwent the"five steps four quadrants"modularized en bloc dissection technique without lymph node clearance-related complications such as postoperative bleeding or lymphatic leakage.Correlation analysis revealed significant associations between preoperative BMI(r=0.3581,P=0.0091),TBIL level(r=0.2988,P=0.0341),prothrombin time(r=0.3018,P=0.0297)and lymph node dissection time.Moreover,dissection time was significantly correlated with intraoperative blood loss(r=0.7744,P<0.0001).Further stratified analysis demonstrated that patients with a preoperative BMI≥21.9 kg/m²and a TIBL concentration≥57.7μmol/L had significantly longer lymph node dissection times(both P<0.05).CONCLUSION The"five steps four quadrants"modularized en bloc dissection technique for accessing the hepatic hilum lymph node is safe and feasible for LPD.This technique is expected to improve the efficiency of hepatic hilum lymph node dissection and shorten the learning curve;thus,it is worthy of further clinical promotion and application.展开更多
Half-integer microwave induced steps(Shapiro steps)have been observed in many different Josephson junction systems,which have attracted a lot of attention because they signify the deviation of current phase relation(C...Half-integer microwave induced steps(Shapiro steps)have been observed in many different Josephson junction systems,which have attracted a lot of attention because they signify the deviation of current phase relation(CPR)and uncover many unconventional physical properties.In this article,we first report the discovery of half-integer Shapiro steps in MgB_(2)focused He ion beam(He-FIB)Josephson junctions.The half-integer steps'dependence on microwave frequency,temperature,microwave power,and magnetic field is also analyzed.We find that the existence of half-integer steps can be controlled by the magnetic field periodically,which is similar to that of high temperature superconductor(HTS)grain boundary junctions,and the similarity of the microstructures between gain boundary junctions and He-FIB junctions is discussed.As a consequence,we mainly attribute the physical origin of half-integer steps in MgB_(2)He-FIB junctions to the model that a He-FIB junction is analogous to a parallel junctions'array.Our results show that He-FIB technology is a promising platform for researching CPR in junctions made of different superconductors.展开更多
The effects of the acid leaching and alkali fusion on the leaching efficiency of Y,Eu,Ce,and Tb from the waste rare earth fluorescent powders were investigated in this paper.The results show that hydrochloric acid is ...The effects of the acid leaching and alkali fusion on the leaching efficiency of Y,Eu,Ce,and Tb from the waste rare earth fluorescent powders were investigated in this paper.The results show that hydrochloric acid is better than sulfuric acid in the first acid leaching,and NaOH is better than Na2CO3in the alkali fusion.In the first acid leaching,the Wloss is 20.94%when the waste rare earth fluorescent powders are acid leached in H?concentration 3 mol L-1and S/L ratio 1:3 for 4 h due to red powders dissolved.The better results of the alkali fusion can be got at 800℃ for 2 h when the NaOH is used.The blue powders and the green powders can be dissolved into NaAlO2and oxides such as rare earth oxide(REO).The REO can be dissolved in H?concentration 5 mol L-1,S/L1:10 for 3 h in the second acid leaching.The leaching rates of the Y,Eu,Ce,and Tb are 99.06%,97.38%,98.22%,and 98.15%,respectively.The leaching rate of the total rare earth is 98.60%.展开更多
Multiple crack identification plays an important role in vibration-based crack identification of structures. Traditional crack detection method of single crack is difficult to be used in multiple crack diagnosis. A th...Multiple crack identification plays an important role in vibration-based crack identification of structures. Traditional crack detection method of single crack is difficult to be used in multiple crack diagnosis. A three-step-meshing method for the multiple cracks identification in structures is presented. Firstly, the changes in natural frequency of a structure with various crack locations and depth are accurately obtained by means of wavelet finite element method, and then the damage coefficient method is used to determine the number and the region of cracks. Secondly, different regions in the cracked structure are divided into meshes with different scales, and then the small unit containing cracks in the damaged area is gradually located by iterative computation. Lastly, by finding the points of intersection of three frequency contour lines in the small unit, the crack location and depth are identified. In order to verify the effectiveness of the presented method, a multiple cracks identification experiment is carried out. The diagnostic tests on a cantilever beam under two working conditions show the accuracy of the proposed method： with a maximum error of crack location identification 2.7% and of depth identification 5.2%. The method is able to detect multiple crack of beam with less subdivision and higher precision, and can be developed as a multiple crack detection approach for complicated structures.展开更多
A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many record...A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many recordings disagree with theoretic calculation using static dislocation model. Secondly, abnormally large strain steps are ob-served at quite a few stations in the tectonically active east-northern China, while in the relatively inactive east-southern China no obvious steps are recorded. It is inferred that seismic stress triggering may significantly affect remote seismic strain field. In other words, whether remote faulting be seismically triggered or not may de-termine the pattern of local seismic strain changes. Further comparison study results of March 11, 1999 Zhangbei earthquake and November 1, 1999 Datong earthquake show that the specific pattern of seismic zones has obvious influence on seismic strain changes in the region. This supports the idea that observed abnormal strain steps might be produced by coseismicly stress-triggered local faulting.展开更多
In order to get atomic smooth rigid disk substrate surface, ultra-fined alumina slurry and nanometer silica slurry are prepared, and two steps chemical-mechanical polishing （CMP） of rigid disk substrate in the two s...In order to get atomic smooth rigid disk substrate surface, ultra-fined alumina slurry and nanometer silica slurry are prepared, and two steps chemical-mechanical polishing （CMP） of rigid disk substrate in the two slurries are studied. The results show that, during the first step CMP in the alumina slurry, a high material removal rate is reached, and the average roughness （Ra） and the average waviness （Wa） of the polished surfaces can be decreased from previous 1.4 nm and 1.6 nm to about 0.6 nm and 0.7 nm, respectively. By using the nanometer silica slurry and optimized polishing process parameters in the second step CMP, the Ra and the Wa of the polished surfaces can be further reduced to 0.038 nm and 0.06 am, respectively. Atom force microscopy （AFM） analysis shows that the final polished surfaces are ultra-smooth without micro-defects.展开更多
In this article, the dependent steps of a negative drift random walk are modelled as a two-sided linear process. Xn=-u＋∑j=-∞^∞ φn-jεj, where { ε, εn; -∞〈n〈＋∞} is a sequence of independent, identically di...In this article, the dependent steps of a negative drift random walk are modelled as a two-sided linear process. Xn=-u＋∑j=-∞^∞ φn-jεj, where { ε, εn; -∞〈n〈＋∞} is a sequence of independent, identically distributed random variables with zero mean, u 〉 0 is a constant and the coefficients {φi; -∞〈i〈∞} satisfy 0〈 ∑j=-∞^∞ ｜jφj｜〈 ∞ . Under the conditions that the distribution function of ｜ε｜ has dominated variation and ε satisfies certain tail balance conditions, the asymptotic behavior of P{sup n≥0 （-qu＋∑j=-∞^∞ εj βnj）〉x} is discussed. Then the result is applied to ultimate ruin probability.展开更多
In this paper, we develop a modified accelerated stochastic simulation method for chemically reacting systems, called the ＂final all possible steps＂ （FAPS） method, which obtains the reliable statistics of all spec...In this paper, we develop a modified accelerated stochastic simulation method for chemically reacting systems, called the ＂final all possible steps＂ （FAPS） method, which obtains the reliable statistics of all species in any time during the time course with fewer simulation times. Moreover, the FAPS method can be incorporated into the leap methods, which makes the simulation of larger systems more efficient. Numerical results indicate that the proposed methods can be applied to a wide range of chemically reacting systems with a high-precision level and obtain a significant improvement on efficiency over the existing methods.展开更多
基金Supported by Health Research Program of Anhui,No.AHWJ2022b032。
文摘BACKGROUND Although en bloc dissection of hepatic hilum lymph nodes has many advantages in radical tumor treatment,the feasibility and safety of this approach for laparo-scopic pancreaticoduodenectomy(LPD)require further clinical evaluation and investigation.AIM To explore the application value of the"five steps four quadrants"modularized en bloc dissection technique for accessing hepatic hilum lymph nodes in LPD patients.METHODS A total of 52 patients who underwent LPD via the"five steps four quadrants"modularized en bloc dissection technique for hepatic hilum lymph nodes from April 2021 to July 2023 in our department were analyzed retrospectively.The patients'body mass index(BMI),preoperative laboratory indices,intraoperative variables and postoperative complications were recorded.The relationships between preoperative data and intraoperative lymph node dissection time and blood loss were also analyzed.RESULTS Among the 52 patients,36 were males and 16 were females,and the average age was 62.2±11.0 years.There were 26 patients with pancreatic head cancer,16 patients with periampullary cancer,and 10 patients with distal bile duct cancer.The BMI was 22.3±3.3 kg/m²,and the median total bilirubin(TBIL)concentration was 57.7(16.0-155.7)µmol/L.All patients successfully underwent the"five steps four quadrants"modularized en bloc dissection technique without lymph node clearance-related complications such as postoperative bleeding or lymphatic leakage.Correlation analysis revealed significant associations between preoperative BMI(r=0.3581,P=0.0091),TBIL level(r=0.2988,P=0.0341),prothrombin time(r=0.3018,P=0.0297)and lymph node dissection time.Moreover,dissection time was significantly correlated with intraoperative blood loss(r=0.7744,P<0.0001).Further stratified analysis demonstrated that patients with a preoperative BMI≥21.9 kg/m²and a TIBL concentration≥57.7μmol/L had significantly longer lymph node dissection times(both P<0.05).CONCLUSION The"five steps four quadrants"modularized en bloc dissection technique for accessing the hepatic hilum lymph node is safe and feasible for LPD.This technique is expected to improve the efficiency of hepatic hilum lymph node dissection and shorten the learning curve;thus,it is worthy of further clinical promotion and application.
基金supported by the National Natural Science Foundation of China (Grant No.12104016)the National Key Research and Development Program of China (Grant No.2020YFF01014706)。
文摘Half-integer microwave induced steps(Shapiro steps)have been observed in many different Josephson junction systems,which have attracted a lot of attention because they signify the deviation of current phase relation(CPR)and uncover many unconventional physical properties.In this article,we first report the discovery of half-integer Shapiro steps in MgB_(2)focused He ion beam(He-FIB)Josephson junctions.The half-integer steps'dependence on microwave frequency,temperature,microwave power,and magnetic field is also analyzed.We find that the existence of half-integer steps can be controlled by the magnetic field periodically,which is similar to that of high temperature superconductor(HTS)grain boundary junctions,and the similarity of the microstructures between gain boundary junctions and He-FIB junctions is discussed.As a consequence,we mainly attribute the physical origin of half-integer steps in MgB_(2)He-FIB junctions to the model that a He-FIB junction is analogous to a parallel junctions'array.Our results show that He-FIB technology is a promising platform for researching CPR in junctions made of different superconductors.
基金supported by the National Hi-Tech R&D Program of China (No. 2012AA063202)National Key Project of Scientific and Technical Support Program of China (Nos. 2011BAE13B07, 2012BAC02B01, and 2011BAC10B02)National Natural Science Foundation of China (Nos. 51174247 and 50972013)
文摘The effects of the acid leaching and alkali fusion on the leaching efficiency of Y,Eu,Ce,and Tb from the waste rare earth fluorescent powders were investigated in this paper.The results show that hydrochloric acid is better than sulfuric acid in the first acid leaching,and NaOH is better than Na2CO3in the alkali fusion.In the first acid leaching,the Wloss is 20.94%when the waste rare earth fluorescent powders are acid leached in H?concentration 3 mol L-1and S/L ratio 1:3 for 4 h due to red powders dissolved.The better results of the alkali fusion can be got at 800℃ for 2 h when the NaOH is used.The blue powders and the green powders can be dissolved into NaAlO2and oxides such as rare earth oxide(REO).The REO can be dissolved in H?concentration 5 mol L-1,S/L1:10 for 3 h in the second acid leaching.The leaching rates of the Y,Eu,Ce,and Tb are 99.06%,97.38%,98.22%,and 98.15%,respectively.The leaching rate of the total rare earth is 98.60%.
基金supported by National Natural Science Foundation of China(Grant Nos. 11176024, 51035007)National Basic Research Program of China(973 Program, Grant No. 2011CB706805)Open Research Fund Program of Hunan Provincial Key Laboratory of Health Maintenance for Mechanical Equipment, China
文摘Multiple crack identification plays an important role in vibration-based crack identification of structures. Traditional crack detection method of single crack is difficult to be used in multiple crack diagnosis. A three-step-meshing method for the multiple cracks identification in structures is presented. Firstly, the changes in natural frequency of a structure with various crack locations and depth are accurately obtained by means of wavelet finite element method, and then the damage coefficient method is used to determine the number and the region of cracks. Secondly, different regions in the cracked structure are divided into meshes with different scales, and then the small unit containing cracks in the damaged area is gradually located by iterative computation. Lastly, by finding the points of intersection of three frequency contour lines in the small unit, the crack location and depth are identified. In order to verify the effectiveness of the presented method, a multiple cracks identification experiment is carried out. The diagnostic tests on a cantilever beam under two working conditions show the accuracy of the proposed method： with a maximum error of crack location identification 2.7% and of depth identification 5.2%. The method is able to detect multiple crack of beam with less subdivision and higher precision, and can be developed as a multiple crack detection approach for complicated structures.
基金National Natural Science Foundation of China (40374011), Joint Seismological Foundation of China (1040037) and Investigating Active Faults in Major Cities Program.
文摘A study of the Kunlunshan earthquake of MS = 8.1 based on observed coseismic strain steps from the borehole strain monitoring network over China has been carried out with some interesting results. Firstly, many recordings disagree with theoretic calculation using static dislocation model. Secondly, abnormally large strain steps are ob-served at quite a few stations in the tectonically active east-northern China, while in the relatively inactive east-southern China no obvious steps are recorded. It is inferred that seismic stress triggering may significantly affect remote seismic strain field. In other words, whether remote faulting be seismically triggered or not may de-termine the pattern of local seismic strain changes. Further comparison study results of March 11, 1999 Zhangbei earthquake and November 1, 1999 Datong earthquake show that the specific pattern of seismic zones has obvious influence on seismic strain changes in the region. This supports the idea that observed abnormal strain steps might be produced by coseismicly stress-triggered local faulting.
基金This project is supported by National Basic Research Program of China (973 Program, N0.2003CB716201)National Natural Science Foundation of China (No.50575131)Science Foundation of Shanghai Municipal Commission of Science and Technology, China(No.0452nm013).
文摘In order to get atomic smooth rigid disk substrate surface, ultra-fined alumina slurry and nanometer silica slurry are prepared, and two steps chemical-mechanical polishing （CMP） of rigid disk substrate in the two slurries are studied. The results show that, during the first step CMP in the alumina slurry, a high material removal rate is reached, and the average roughness （Ra） and the average waviness （Wa） of the polished surfaces can be decreased from previous 1.4 nm and 1.6 nm to about 0.6 nm and 0.7 nm, respectively. By using the nanometer silica slurry and optimized polishing process parameters in the second step CMP, the Ra and the Wa of the polished surfaces can be further reduced to 0.038 nm and 0.06 am, respectively. Atom force microscopy （AFM） analysis shows that the final polished surfaces are ultra-smooth without micro-defects.
基金Research supported by National Science Foundation of China (70671018 and 10371117)
文摘In this article, the dependent steps of a negative drift random walk are modelled as a two-sided linear process. Xn=-u＋∑j=-∞^∞ φn-jεj, where { ε, εn; -∞〈n〈＋∞} is a sequence of independent, identically distributed random variables with zero mean, u 〉 0 is a constant and the coefficients {φi; -∞〈i〈∞} satisfy 0〈 ∑j=-∞^∞ ｜jφj｜〈 ∞ . Under the conditions that the distribution function of ｜ε｜ has dominated variation and ε satisfies certain tail balance conditions, the asymptotic behavior of P{sup n≥0 （-qu＋∑j=-∞^∞ εj βnj）〉x} is discussed. Then the result is applied to ultimate ruin probability.
基金the National Natural Science Foundation of China(No.30571059)the National High-Tech Research and Development Program of China(No.2006AA02Z190)
文摘In this paper, we develop a modified accelerated stochastic simulation method for chemically reacting systems, called the ＂final all possible steps＂ （FAPS） method, which obtains the reliable statistics of all species in any time during the time course with fewer simulation times. Moreover, the FAPS method can be incorporated into the leap methods, which makes the simulation of larger systems more efficient. Numerical results indicate that the proposed methods can be applied to a wide range of chemically reacting systems with a high-precision level and obtain a significant improvement on efficiency over the existing methods.
