Slip is one of the most critical components for the frac plug,which would lodge into the casing and lock the frac plug in place during the setting and anchoring process.However,fracture failure of slip significantly a...Slip is one of the most critical components for the frac plug,which would lodge into the casing and lock the frac plug in place during the setting and anchoring process.However,fracture failure of slip significantly affects the hydraulic fracturing effects and has attracted tremendous attention.In this paper,a three-dimensional contact model is applied to explore the setting process of slip.The effects of key structural parameters such as apex angle,inclination angle,and wedge angle on the contact characteristics of slip are systematically investigated.Numerical results indicate that the maximum contact stress appears at the contact area between slip tooth and the casing’s inner wall.Besides,the maximum contact stress generally increases with the increase of apex angle and inclination angle,while decrease linearly with the rise in the wedge angle.Experimental results show that the slip teeth get blunt and appear severe plastic deformation,which arises from stress concentration.Comparison of biting area indicates that the experimental results are about 21.3%larger,which still have a reasonable agreement with the numerical results.These obtained results can guide the parametric selection of plug slip and other similar components.展开更多
A novel slow-down set waveform is proposed to improve the set performance and a 1 kb phase change random access memory chip fabricated with a 13nm CMOS technology is implemented to investigate the set performance by d...A novel slow-down set waveform is proposed to improve the set performance and a 1 kb phase change random access memory chip fabricated with a 13nm CMOS technology is implemented to investigate the set performance by different set programming strategies based on this new set pulse. The amplitude difference （I1 - I2） of the set pulse is proved to be a crucial parameter for set programming. We observe and analyze the cell characteristics with different I1 - I2 by means of thermal simulations and high-resolution transmission electron microscopy, which reveal that an incomplete set programming will occur when the proposed slow-down pulse is set with an improperly high I1 - I2. This will lead to an amorphous residue in the active region. We also discuss the programming method to avoid the set performance degradations.展开更多
Satellite constellation design for space optical systems is essentially a multiple-objective optimization problem. In this work, to tackle this challenge, we first categorize the performance metrics of the space optic...Satellite constellation design for space optical systems is essentially a multiple-objective optimization problem. In this work, to tackle this challenge, we first categorize the performance metrics of the space optical system by taking into account the system tasks（i.e., target detection and tracking）. We then propose a new non-dominated sorting genetic algorithm（NSGA） to maximize the system surveillance performance. Pareto optimal sets are employed to deal with the conflicts due to the presence of multiple cost functions. Simulation results verify the validity and the improved performance of the proposed technique over benchmark methods.展开更多
Selection of the crusher required a great deal of design regarding to the mine planning. Selection of suitable primary crusher from all of available primary crushers is a multi-criterion decision making(MCDM) problem....Selection of the crusher required a great deal of design regarding to the mine planning. Selection of suitable primary crusher from all of available primary crushers is a multi-criterion decision making(MCDM) problem. The present work explores the use of technique for order performance by similarity to ideal solution(TOPSIS) with fuzzy set theory to select best primary crusher for Golegohar Iron Mine in Iran. Gyratory, double toggle jaw, single toggle jaw, high speed roll crusher, low speed sizer, impact crusher, hammer mill and feeder breaker crushers have been considered as alternatives. Also, the capacity, feed size, product size, rock compressive strength, abrasion index and application of primary crusher for mobile plants were considered as criteria for solution of this MCDM problem. To determine the order of the alternatives, closeness coefficient is defined by calculating the distances to the fuzzy positive ideal solution(FPIS) and fuzzy negative ideal solution(FNIS). Results of our work based on fuzzy TOPSIS method show that the gyratory is the best primary crusher for the studied mine.展开更多
基金financial support from the National Major Science and Technology Projects of China(Grant No.2017ZX05072)the Royal Society Newton International Fellowships(Grant No.NIF/R1/181640)the Marie SkłodowskaCurie Individual Fellowships under European Union’s Horizon 2020 research and innovation programme(Grant No.840264)
文摘Slip is one of the most critical components for the frac plug,which would lodge into the casing and lock the frac plug in place during the setting and anchoring process.However,fracture failure of slip significantly affects the hydraulic fracturing effects and has attracted tremendous attention.In this paper,a three-dimensional contact model is applied to explore the setting process of slip.The effects of key structural parameters such as apex angle,inclination angle,and wedge angle on the contact characteristics of slip are systematically investigated.Numerical results indicate that the maximum contact stress appears at the contact area between slip tooth and the casing’s inner wall.Besides,the maximum contact stress generally increases with the increase of apex angle and inclination angle,while decrease linearly with the rise in the wedge angle.Experimental results show that the slip teeth get blunt and appear severe plastic deformation,which arises from stress concentration.Comparison of biting area indicates that the experimental results are about 21.3%larger,which still have a reasonable agreement with the numerical results.These obtained results can guide the parametric selection of plug slip and other similar components.
基金Supported by the Strategic Priority Research Program of Chinese Academy of Sciences under Grant No XDA09020402the National Key Basic Research Program of China under Grant Nos 2013CBA01900,2010CB934300,2011CBA00607,and 2011CB932804+2 种基金the National Integrate Circuit Research Program of China under Grant No 2009ZX02023-003the National Natural Science Foundation of China under Grant Nos 61176122,61106001,61261160500,and 61376006the Science and Technology Council of Shanghai under Grant Nos 12nm0503701,13DZ2295700,12QA1403900,and 13ZR1447200
文摘A novel slow-down set waveform is proposed to improve the set performance and a 1 kb phase change random access memory chip fabricated with a 13nm CMOS technology is implemented to investigate the set performance by different set programming strategies based on this new set pulse. The amplitude difference （I1 - I2） of the set pulse is proved to be a crucial parameter for set programming. We observe and analyze the cell characteristics with different I1 - I2 by means of thermal simulations and high-resolution transmission electron microscopy, which reveal that an incomplete set programming will occur when the proposed slow-down pulse is set with an improperly high I1 - I2. This will lead to an amorphous residue in the active region. We also discuss the programming method to avoid the set performance degradations.
文摘Satellite constellation design for space optical systems is essentially a multiple-objective optimization problem. In this work, to tackle this challenge, we first categorize the performance metrics of the space optical system by taking into account the system tasks（i.e., target detection and tracking）. We then propose a new non-dominated sorting genetic algorithm（NSGA） to maximize the system surveillance performance. Pareto optimal sets are employed to deal with the conflicts due to the presence of multiple cost functions. Simulation results verify the validity and the improved performance of the proposed technique over benchmark methods.
文摘Selection of the crusher required a great deal of design regarding to the mine planning. Selection of suitable primary crusher from all of available primary crushers is a multi-criterion decision making(MCDM) problem. The present work explores the use of technique for order performance by similarity to ideal solution(TOPSIS) with fuzzy set theory to select best primary crusher for Golegohar Iron Mine in Iran. Gyratory, double toggle jaw, single toggle jaw, high speed roll crusher, low speed sizer, impact crusher, hammer mill and feeder breaker crushers have been considered as alternatives. Also, the capacity, feed size, product size, rock compressive strength, abrasion index and application of primary crusher for mobile plants were considered as criteria for solution of this MCDM problem. To determine the order of the alternatives, closeness coefficient is defined by calculating the distances to the fuzzy positive ideal solution(FPIS) and fuzzy negative ideal solution(FNIS). Results of our work based on fuzzy TOPSIS method show that the gyratory is the best primary crusher for the studied mine.
