Effects of different feeding methods and space allowance on the growth performance, individual and social behaviors of Holstein calves

The importance of nutrient provisions and weaning methods for calves has been well established over the past few years,while as increasing interest has focused on contribution of animal behavior and their overall performance in production regimes.The present study investigated the effects of feeding methods and space allowance on growth performance,individual and social behaviors in Holstein calves.Twenty-four Chinese Holstein male and female calves were allocated to either an individual or group of 6 and fed either with a bucket or a teat.Milk replacer,calf starter,and Chinese wildrye were offered during the experiment.A fecal index used in the present study was defined as the total fecal scores/total number of calves in each treatment.The results showed that there was no significant difference among the 4 treatments in terms of feed intake,body weight,average daily gain,and fecal index.For the feeding behaviors,the ingesting milk time and ingesting milk rate were significantly affected by space allowance,while the feeding methods showed a significant influence on the bunting behavior of the calves.There was no significant difference among the 4 treatments in terms of licking fixtures,self-grooming,and lying down behaviors,irrespective of the feeding method or space allowance.However,sucking an empty bucket or the teat was significantly affected by the feeding method.Several selected group behaviors were examined in the present study,and similar values for sniffing the other calves,social grooming,and cross-sucking behaviors were observed.Overall,the present study demonstrated that different feeding methods and space allowances had a significant effect on the feeding behavior of calves,while the feed intake,growth performance,health condition,individual and group social behaviors were not significantly influenced.Furthermore,under intensified production systems,Holstein calves raised in a group may obtain a similar production performance,thus reducing management input and profitability compared with those kept individually.However,there may be competition during the feeding period.

A non-uniform allowance allocation method based on interim state stiffness of machining features for NC programming of structural parts

For thin-walled parts,uniform allowance to each machining surface is allocated by the traditional machining method.Considering the sequence of the adjacent machining features,it may cause poor stiffness for some side walls due to a minor wall thickness,which may cause the deformation of the final formed parts to be large,or deduce machining efficiency for some machining features due to too thick remains.In order to address this issue,a non-uniform allowance allocation method based on interim state stiffness of machining features for the finishing of thin-walled structural parts is proposed in this paper.In this method,the interim state model of machining features is constructed according to the machining sequence of the parts,and the stiffness of the side wall is taken as the evaluation index to allocate reasonable allowance value to the corresponding machining surface to ensure the stiffness requirement of the parts in the machining process.According to the finite element simulation results,the non-uniform allowance allocation method proposed in this paper can effectively improve the stiffness of the parts and reduce the deformation of the parts,when compared with the traditional uniform allowance machining method.

Targeted Poverty Alleviation Lies in Precisely Identifying the Poverty–Stricken Population: An Analysis of the Targeting Effect of the Rural Subsistence Allowance Policy

Poverty–stricken populations must be identified precisely in the fight against poverty to implement the strategy of building a moderately prosperous society in all respects by 2020. The analysis based on the household survey in 2013 shows that the targeting accuracy is not high based on the standard of income and the accuracy is higher based on the standard of multidimensional poverty index. But the latter still has a low coverage rate. To gradually achieve integration of the rural poverty line and the rural subsistence allowance line, standards applied to identifying households entitled to subsistence allowances should be changed from the standard of income to multidimensional poverty indexes. A unified standard of subsistence allowances and a unified method for identifying related households should be developed. At the same time, coverage and funding of subsistence allowances should be extended and increased to better meet people's basic needs.

Quasi-Newton Method for Optimal Blank Allowance Balancing

A balancing technique for casting or forging parts to be machined is presented in this paper.It allows an optimal part setup to make sure that no shortage of material(undercut)will occur during machining.Particularly in the heavy part in- dustry,where the resulting casting size and shape may deviate from expectations,the balancing process discovers whether or not the design model is totally enclosed in the actual part to be machined.The alignment is an iterative process involving nonlinear con- strained optimization,which forces data points to lie outside the nominal model under a specific order of priority.Newton methods for non-linear numerical minimization are rarely applied to this problem because of the high cost of computing.In this paper, Newton methods are applied to the balancing of blank part.The aforesaid algorithm is demonstrated in term of a marine propeller blade,and result shows that The Newton methods are more efficient and accurate than those implemented in past research and have distinct advantages compared to the registration methods widely used today.

Fundamental issues and solutions in the design of China's ETS pilots:Allowance allocation,price mechanism and state-owned key enterprises

This paper analyzes the three main fundamental issues in the design of China's ETS pilots,including allowance allocation,price mechanism and state-owned key enterprises,and proposed suggested solutions.For the issue of allowance allocation,we suggest that the gradual hybrid mode could be applied at the beginning,which starts with mainly free allocation and then increases auction ratio gradually.And grandfathering is a suitable method of free allocation.For the issue of price mechanism,we suggest a price floating zone with open market operation to reduce the uncertainty of prices.For the issue of state-owned key enterprises,we suggest a good coordination with SASAC,defining the state-owned property right and supervision right when state-owned key enterprises are involved into the carbon market,and the local government can set rules of allocation and transaction to limit their potential market power.

Allowance of Lateral Breakthrough Error for Super Long Tunnels from 20km to 50km

Up to now there is no specification about the allowance of lateral breakthrough error for super long tunnel from 20 km to 50 km. On the basis of the design of GPS networks located outside and inside tunnel traverse network, we propose a method for calculating the influence value caused by control surveying errors. Through a lot of simulative calculations and combination with piercing practice of super tunnels in Wan Jiazai Project, Shanxi province, we present an allowance table of lateral breakthrough error for super long tunnels from 20 km to 50 km.

A carbon-intensity based carbon allowance allocation scheme among enterprises in Shenzhen

On October 29, 2011, a number of cities and provinces in China were chosen to host pilot locations for carbon emissions trading systems. Before a carbon trading market can be functional, carbon emission allowances need to be allocated. This makes the carbon emissions allowance allocation scheme crucially important as it goes a long way in deciding the effi ciency and fairness of the carbon cap-andtrade market. Although it has been proved that allocation by auction is the most effective way, Shenzhen city as one of the trading pilots will allocate carbon allowances free of charge at the initial stage. The European Union's(EU) free allocation system, a product-based benchmark scheme for the manufacturing industry implement in 2013, is not feasible for Shenzhen due to the lack of data at a product level. Therefore the target of this paper is to explore a new allocation scheme with the data at a fi rm level other than the grandfathering scheme to fi ll the gap. In this paper, a carbon intensity based allocation scheme is developed by using the Boltzmann distribution and Gail- Shapley game. In the fi nal part of the report, fi rm level data from 2010 to 2011 of fi rms in Shenzhen, China are used to verify the effect and fi tness of the allocation scheme.

Allowance Extraction Considering of Inner and Outer Contour and Experimental Research on Belt Grinding of Hollow Blade

Aero-engine fan blades of ten use a cavity structure to improve the thrust-to-weight ratio of the aircraft.However,the use of the cavity structure brings a series of difficulties to the manufacturing and processing of the blades.Due to the limitation of blade manufacturing technology,it is difficult for the internal cavity structure to achieve the designed contour shape,so the blade has uneven wall thickness and poor consistency,which affects the fatigue performance and airflow dynamic performance of the blade.In order to reduce the influence of uneven wall thickness,this paper proposes a grinding allowance extraction method considering the double dimension constraints(DDC)of the inner and outer contours of the hollow blade.Constrain the two dimensions of the inner and outer contours of the hollow blade.On the premise of satisfying the outer contour constraints,the machining model of the blade is modified according to the distribution of the inwall contour to obtain a more reasonable distribution of the grinding allowance.On the premise of satisfying the contour constraints,according to the distribution of the inwall contour,the machining model of the blade is modified to obtain a more reasonable distribution of the grinding allowance.Through the grinding experiment of the hollow blade,the surface roughness is below Ra0.4μm,and the contour accuracy is between-0.05~0.14 mm,which meets the processing requirements.Compared with the allowance extraction method that only considers the contour,the problem of poor wall thickness consistency can be effectively improved.It can be used to extract the allowance of aero-engine blades with hollow features,which lays a foundation for the study of hollow blade grinding methods with high service performance.

Study of Un-added Allowance of Draping-PIanar Designing Garment Prototype for Young Ladies

As for the theory and method in garment structural design according to human figures,a principle for garment design,i.e.body-fitting without added allowance,and a combination of draping and planar design (DPD hereunder) for young ladies has been put forward,and,also,a DPD garment prototype for them has been established.And the applied formulae for extensively-practicing operation have been set up,which proves to be,with actual samples,a systematic and practical garment structural designing theory and approach.

Optimal reduction and equilibrium carbon allowance price for the thermal power industry under China’s peak carbon emissions target

As the largest source of carbon emissions in China,the thermal power industry is the only emission-controlled industry in the first national carbon market compliance cycle.Its conversion to clean-energy generation technologies is also an important means of reducing CO_(2)emissions and achieving the carbon peak and carbon neutral commitments.This study used fractional Brownian motion to describe the energy-switching cost and constructed a stochastic optimization model on carbon allowance(CA)trading volume and emission-reduction strategy during compliance period with the Hurst exponent and volatility coefficient in the model estimated.We defined the optimal compliance cost of thermal power enterprises as the form of the unique solution of the Hamilton–Jacobi–Bellman equation by combining the dynamic optimization principle and the fractional It?’s formula.In this manner,we obtained the models for optimal emission reduction and equilibrium CA price.Our numerical analysis revealed that,within a compliance period of 2021–2030,the optimal reductions and desired equilibrium prices of CAs changed concurrently,with an increasing trend annually in different peak-year scenarios.Furthermore,sensitivity analysis revealed that the energy price indirectly affected the equilibrium CA price by influencing the Hurst exponent,the depreciation rate positively impacted the CA price,and increasing the initial CA reduced the optimal reduction and the CA price.Our findings can be used to develop optimal emission-reduction strategies for thermal power enterprises and carbon pricing in the carbon market.

Optimal Bidding and Operation of a Power Plant with Solvent-BasedCarbon Capture under a CO2 Allowance Market： A Solution with aReinforcement Learning-Based Sarsa Temporal-Difference Algorithm

In this paper, a reinforcement learning （RL）-based Sarsa temporal-difference （TD） algorithm is applied tosearch for a unified bidding and operation strategy for a coal-fired power plant with monoethanolamine（MEA）-based post-combustion carbon capture under different carbon dioxide （CO2） allowance market con-ditions. The objective of the decision maker for the power plant is to maximize the discounted cumulativeprofit during the power plant lifetime. Two constraints are considered for the objective formulation. Firstly,the tradeoff between the energy-intensive carbon capture and the electricity generation should be made un-der presumed fixed fuel consumption. Secondly, the CO2 allowances purchased from the CO2 allowance mar-ket should be approximately equal to the quantity of COs emission from power generation. Three case stud-ies are demonstrated thereafter. In the first case, we show the convergence of the Sarsa TD algorithm andfind a deterministic optimal bidding and operation strategy. In the second case, compared with the inde-pendently designed operation and bidding strategies discussed in most of the relevant literature, the SarsaTD-based unified bidding and operation strategy with time-varying flexible market-oriented CO2 capturelevels is demonstrated to help the power plant decision maker gain a higher discounted cumulative profit.In the third case, a competitor operating another power plant identical to the preceding plant is consideredunder the same CO2 allowance market. The competitor also has carbon capture facilities but applies a differ-ent strategy to earn profits. The discounted cumulative profits of the two power plants are then compared,thus exhibiting the competitiveness of the power plant that is using the unified bidding and operation strat-egy explored by the Sarsa TD algorithm.

The Influence of Allowance Allocation Methods on CO2 Emission Reduction： Experiences From the Seven China Pilots

One of the key elements influencing the performance of a carbon trading system, are the methods of allocating the initial CO2 emissions. This paper tries to use a quantitative description method to analyze the influence of the different allocation methods on the level of CO2 emissions based on the seven pilot trading markets from 2009 to 2013 in China. The results show that different methods bring about various degrees of impacts, through direct and indirect constraint mechanism, influence the CO2 emission cut finally. Although due to the complexity of the direct and indirect constraint mechanism, attempting to compare the effects of different allocation methods is difficult by using the data of carbon emission cut from seven pilot markets in China, the paper shows that the allowance allocation methods, through the constraints imposed on enterprises, significantly reduce regional carbon emissions.

Research on Slotting Allowances in China

The paper analyzes the characteristics and causes of formation of slotting allowances in China on the base of literature review on slotting allowances. The author believes that the government should take measures to make slotting allowances more reasonable and not to interfere necessary competition.

Impact of climate change on allowable bearing capacity on theQinghai-Tibetan Plateau

Climate change has a substantial impact on infrastructures in the permafrost on the Qinghai-Tibetan Plateau (QTP). In this study, the mean annual ground temperature (MAGT) and permafrost evolution were investigated in both the historical (1950-2005) and projected (2006-2099) periods. Then, an allowable bearing capacity model was used to discuss the allowable bearing capacity change on the QTP. Results show that the MAGT increased by 0.36 ℃ during 1950-2005. The MAGT will increase by 0.40 (RCP2.6), 0.79 (RCP4.5), 1.07 (RCP6.0), and 1.75 (RCP8.5)℃C during 2006-2099. In addition, the permafrost area has decreased by 0.195 × 10^6 km2 in 1950-2005. The permafrost area will decrease by 0.232 × 10^6 (RCP2.6), 0.468 × 10^6 (RCP4.5), 0.564 × 10^6 (RCP6.0), and 0.803 × 10^6 (RCP8.5) km2 during 2006-2099. With the degradation of permafrost, the allowable bearing capacity in permafrost zones would decrease accordingly. The decreasing trend is 6 kPa per 10 years in 1950-2005, and will be 0.6 (RCP2.6), 5 (RCP4.5), 7 (RCP6.0), and 11 (RCP8.5) kPa per 10 years during 2006-2099. The most remarkable trend would be observed under RCP8.5. Meanwhile, some scientific advices for the design, construction, operation and maintenance of permafrost engineering in the context of climate change were provided.

Calculation of Maximum Allowable Free Span Length and Safety Assessment of the DF1-1 Submarine Pipeline

The DFI-1 submarine pipeline was investigated using a dual-frequency side-scan sonar and a swath sounder system. More than a hundred scour pits under the pipeline were found, most of which have caused the span of the pipeline to increase and threatened its safety. The maximum allowable free span length （MAFSL） of the pipeline was determined through the limitations re- garding maximum allowable stress under static or quasi-static loads and the onset of Vortex Induced Vibrations （VIV） under different hydrodynamic actions. The results show that the MAFSL under static conditions is 56m. However, the MAFSLs are 30m and 20m under ordinary weather conditions and hurricane-induced currents for the 100-year return period, respectively, to avoid VIV as cal- culated by using the highest safety class factor. It is suggested that spanning pipelines longer than 20 m should be supported. Addi- tionally, eight successive spans which may also threaten the pipeline were proposed. The most hazardous scour pits are along the pipeline section from KP42 to KP51.

ANGULAR DISTORTION ALLOWABLE VALUE AND ASSESS METHOD OF WELD ON COKE TOWER

A graph as the new engineering method for estimate the safety of bulging deformation of coke tower is proposed. Through stresses analysis of circumferential weld of coke tower and comparing the stresses produced by pressure with heat stress of steady state, residual stress, bending stress produced by both itself weight and wind loads, it showed that the stresses produced by pressure on the angle distortion are the main factor of equivalent stress of the combined stress. After comparing four kinds of stress controlling conditions, the relation to stress with depth of angular distortion, grade of curvature of angular distortion and half of region of angular distortion has been inferred. Graph of deformation allowable value of coke tower for different condition by angular distortion and half of region of angular distortion has been plotted. The five steps for its engineering use have been explained. The lighter the grade of curvature is, the larger of bulge allowance, may be, and the bigger of depth of angular distortion may pose too. For the coke tower with a popular structure of Dg 5 400 mmx28 mm, the result by graph is nearly more than the result of two formulas formed by other research, the error is less than 7.0%. But, the graph can be easily applied to different size of angular distortion.

Big-M based MILP method for SCUC considering allowable wind power output interval and its adjustable conservativeness

In contrast to most existing works on robust unit commitment(UC),this study proposes a novel big-M-based mixed-integer linear programming(MILP)method to solve security-constrained UC problems considering the allowable wind power output interval and its adjustable conservativeness.The wind power accommodation capability is usually limited by spinning reserve requirements and transmission line capacity in power systems with large-scale wind power integration.Therefore,by employing the big-M method and adding auxiliary 0-1 binary variables to describe the allowable wind power output interval,a bilinear programming problem meeting the security constraints of system operation is presented.Furthermore,an adjustable confidence level was introduced into the proposed robust optimization model to decrease the level of conservatism of the robust solutions.This can establish a trade-off between economy and security.To develop an MILP problem that can be solved by commercial solvers such as CPLEX,the big-M method is utilized again to represent the bilinear formulation as a series of linear inequality constraints and approximately address the nonlinear formulation caused by the adjustable conservativeness.Simulation studies on a modified IEEE 26-generator reliability test system connected to wind farms were performed to confirm the effectiveness and advantages of the proposed method.

Study on the Design Method of the Jack-up＇s X-Type Cantilever Allowable Load Nephogram

The extending of a cantilever and transverse moving of a drilling floor enable the jack-up to operate in several well positions after the Jack-up has pitched. The cantilever allowable load nephogram is the critical reference which can evaluate the jack-up's drilling ability, design the cantilever structure and instruct a jack-up manager to make the operations safe. The intent of this paper is to explore the interrelationships between the cantilever position, drilling floor and the loads including wind force, the stand set-back weight etc., through analyzing the structure and load characteristics of the x-type cantilever and the simplified mechanics model with the restriction of the maximum moment capacity of the cantilever single side beam. Referring to several typical position designs load values, the cantilever allowable load nephogram is obtained by using the suitable interpolation method. The paper gives a method for cantilever allowable load design, which is proved reliable and effective by the calculation example.

Electric-dipole allowed(E1) and forbidden(E2,M1 and M2) transition probabilities of 4f for N^+

By applying systematically enlarged multi-configuration Dirac-Fock wavefunction, the transitions for electricdipole allowed （E1） and forbidden （E2, M1 and M2） lines are studied among 4f pair coupling and low-lying configurations for singly ionized nitrogen. Most important effects of relativity, electron correlation, the rearrangement of electron density, Breit interaction, and quantum electrodynamic effects are included in the computation. Then, allowed （E1） and forbidden （E2, M1 and M2） transition probabilities of 4f for N＋ are obtained and compared with experimental results. Good agreement with available experimental results is found and most of the data of 4f are presented for the first time.