A six-parameter mathematical model was introduced to simulate the stress-strain hysteresis and the sinner hysteresis of polycrystalline shape memory alloys (SMAs). By the comparison with experiments of Cu-Zn-Al SMA, i...A six-parameter mathematical model was introduced to simulate the stress-strain hysteresis and the sinner hysteresis of polycrystalline shape memory alloys (SMAs). By the comparison with experiments of Cu-Zn-Al SMA, it was shown that the model could be used to calculate the stress-strain relations with rather good accuracy. Moreover, it was found that the six parameters introduced in this paper represented the characteristics of the stress-strain hysteresis of polycrystalline SMAs and could be used to characterize the hysteresis quantitatively.展开更多
The surface of Ti-50.8Ni at% shape memory alloy was melted by an Nd-YAG laser. The Ti/Ni and Ti4+/Ti atomic concentration ratios at the surface were changed significantly. The Ni ion release rate of the laser melted s...The surface of Ti-50.8Ni at% shape memory alloy was melted by an Nd-YAG laser. The Ti/Ni and Ti4+/Ti atomic concentration ratios at the surface were changed significantly. The Ni ion release rate of the laser melted surface was much lower than that of the mechanical polished samples. A calcium-phosphorous layer with high Ca/P ratio was detected after immersion in Hanks’ solution.展开更多
A series of main chain liquid crystal aromatic copolyesters with X-shaped and rod-shaped mesogenic units were synthesized via solution condensation polymerizations of 4,4'-(alpha,omega-octanedioyloxy)-dibenzoyl di...A series of main chain liquid crystal aromatic copolyesters with X-shaped and rod-shaped mesogenic units were synthesized via solution condensation polymerizations of 4,4'-(alpha,omega-octanedioyloxy)-dibenzoyl dichlorides with 2,5-bis(p-octanoxy benzoyloxy)-hydroquinone and diphenol. All of the copolyesters showed thermotropic liquid crystalline behaviors through observations using DSC, polarized microscopy and X-ray diffraction. The melting point (T-m) and the isotropization temperature (T-i) change regularly with varying the content of diphenol unit in the copolymers.展开更多
A new series of liquid crystal polyesters with T-shaped two-dimensional mesogenic units weresynthesized by melt polycondensation of the diacetates of 2-(4'-alkoxy -phenyl)-hydroquinones with 4,4'-alkylenedioxy...A new series of liquid crystal polyesters with T-shaped two-dimensional mesogenic units weresynthesized by melt polycondensation of the diacetates of 2-(4'-alkoxy -phenyl)-hydroquinones with 4,4'-alkylenedioxydibenzoic acid. The polymers were characterized by using polarized microscopy, DSC and X-ray diffraction. It was realized that all the polymers have nematic thermotropic liquid crystallinecharacteristics. The melting temperature (T_m) and isotropization temperature (T_i) of the polymers changeregularly with varying lengths of the alkoxy side group and the length of the alkylene group in the main chainin company with an even-odd effect. The mesophase temperature range also varies regularly with the polymerstructure. It is shown that the mesophase range has been widened.展开更多
To understand the responses of flag leaf shape in rice to elevated CO2 environment and their genetic characteristics, quantitative trait loci （QTLs） for flag leaf shape in rice were mapped onto the molecular marker ...To understand the responses of flag leaf shape in rice to elevated CO2 environment and their genetic characteristics, quantitative trait loci （QTLs） for flag leaf shape in rice were mapped onto the molecular marker linkage map of chromosome segment substitution lines （CSSLs） derived from a cross between a japonica variety Asominori and an indica variety IR24 under free air carbon dioxide enrichment （FACE, 200 μmol/mol above current levels） and current CO2 concentration （Ambient, about 370 μmol/mol）. Three flag-leaf traits, flag-leaf length （LL）, width （LW） and the ratio of LL to LW （RLW）, were estimated for each CSSL and their parental varieties. The differences in LL, LW and RLW between parents and in LL and LW within IR24 between FACE and Ambient were significant at 1% level. The continuous distributions and transgressive segregations of LL, LW and RLW were also observed in CSSL population, showing that the three traits were quantitatively inherited under both FACE and Ambient. A total of 16 QTLs for the three traits were detected on chromosomes 1, 2, 3, 4, 6, 8 and 11 with LOD （Log10-1ikelihood ratio） scores ranging from 3.0 to 6.7. Among them, four QTLs （qLL-6＊, qLL-8＊ qLW-4＊ and qRLW-6＊） were commonly detected under both FACE and Ambient. Therefore, based on the different responses to elevated CO2 in comparison with current CO2 level, it can be suggested that the expressions of several QTLs associated with flag-leaf shape in rice could be induced by the high CO2 level.展开更多
Traditional preparation of magnetic microcapsules involves cumbersome processes and often results in irregular-shaped products. Due to the stable laminar flow of reaction solution and the moderate reaction conditions,...Traditional preparation of magnetic microcapsules involves cumbersome processes and often results in irregular-shaped products. Due to the stable laminar flow of reaction solution and the moderate reaction conditions, the T-shaped microchannel (T-MC) reactor is supposed to yield microcapsules with regular shape. In this paper, magnetic particles of ferroferric oxide modified by oleic acid (OA-Fe3O4) and dispersed in tetrachloroethylene were used as core material. Polymethyl methacrylate (PMMA) was used as shell material. Magnetic microcapsules were prepared by using a T-MC reactor. Factors that influenced the encapsulated reaction were investigated in details, which included the velocity ratio of aqueous phase to oil phase, the length and the inner diameter of the microchannel. The morphology, composition, and magnetic responsiveness of the magnetic microcapsules were analyzed and characterized by SEM, FTIR, XRD, TGA, and vibrating sample magnetometer (VSM). The results confirmed that magnetic microcapsules prepared by T-MC reactor were regular in shape.展开更多
文摘A six-parameter mathematical model was introduced to simulate the stress-strain hysteresis and the sinner hysteresis of polycrystalline shape memory alloys (SMAs). By the comparison with experiments of Cu-Zn-Al SMA, it was shown that the model could be used to calculate the stress-strain relations with rather good accuracy. Moreover, it was found that the six parameters introduced in this paper represented the characteristics of the stress-strain hysteresis of polycrystalline SMAs and could be used to characterize the hysteresis quantitatively.
文摘The surface of Ti-50.8Ni at% shape memory alloy was melted by an Nd-YAG laser. The Ti/Ni and Ti4+/Ti atomic concentration ratios at the surface were changed significantly. The Ni ion release rate of the laser melted surface was much lower than that of the mechanical polished samples. A calcium-phosphorous layer with high Ca/P ratio was detected after immersion in Hanks’ solution.
基金The work was supported by the National Natural Science Foundation of China.
文摘A series of main chain liquid crystal aromatic copolyesters with X-shaped and rod-shaped mesogenic units were synthesized via solution condensation polymerizations of 4,4'-(alpha,omega-octanedioyloxy)-dibenzoyl dichlorides with 2,5-bis(p-octanoxy benzoyloxy)-hydroquinone and diphenol. All of the copolyesters showed thermotropic liquid crystalline behaviors through observations using DSC, polarized microscopy and X-ray diffraction. The melting point (T-m) and the isotropization temperature (T-i) change regularly with varying the content of diphenol unit in the copolymers.
基金This work was supported by the National Natural Science Foundation of China.
文摘A new series of liquid crystal polyesters with T-shaped two-dimensional mesogenic units weresynthesized by melt polycondensation of the diacetates of 2-(4'-alkoxy -phenyl)-hydroquinones with 4,4'-alkylenedioxydibenzoic acid. The polymers were characterized by using polarized microscopy, DSC and X-ray diffraction. It was realized that all the polymers have nematic thermotropic liquid crystallinecharacteristics. The melting temperature (T_m) and isotropization temperature (T_i) of the polymers changeregularly with varying lengths of the alkoxy side group and the length of the alkylene group in the main chainin company with an even-odd effect. The mesophase temperature range also varies regularly with the polymerstructure. It is shown that the mesophase range has been widened.
基金The study was supported by the National Natural Science Foundation, China （Grant Nos. 30270800 and 40231003）
文摘To understand the responses of flag leaf shape in rice to elevated CO2 environment and their genetic characteristics, quantitative trait loci （QTLs） for flag leaf shape in rice were mapped onto the molecular marker linkage map of chromosome segment substitution lines （CSSLs） derived from a cross between a japonica variety Asominori and an indica variety IR24 under free air carbon dioxide enrichment （FACE, 200 μmol/mol above current levels） and current CO2 concentration （Ambient, about 370 μmol/mol）. Three flag-leaf traits, flag-leaf length （LL）, width （LW） and the ratio of LL to LW （RLW）, were estimated for each CSSL and their parental varieties. The differences in LL, LW and RLW between parents and in LL and LW within IR24 between FACE and Ambient were significant at 1% level. The continuous distributions and transgressive segregations of LL, LW and RLW were also observed in CSSL population, showing that the three traits were quantitatively inherited under both FACE and Ambient. A total of 16 QTLs for the three traits were detected on chromosomes 1, 2, 3, 4, 6, 8 and 11 with LOD （Log10-1ikelihood ratio） scores ranging from 3.0 to 6.7. Among them, four QTLs （qLL-6＊, qLL-8＊ qLW-4＊ and qRLW-6＊） were commonly detected under both FACE and Ambient. Therefore, based on the different responses to elevated CO2 in comparison with current CO2 level, it can be suggested that the expressions of several QTLs associated with flag-leaf shape in rice could be induced by the high CO2 level.
基金Fundamental Research Funds for the Central Universities,China(No.2011D10543,No.2013D110525)
文摘Traditional preparation of magnetic microcapsules involves cumbersome processes and often results in irregular-shaped products. Due to the stable laminar flow of reaction solution and the moderate reaction conditions, the T-shaped microchannel (T-MC) reactor is supposed to yield microcapsules with regular shape. In this paper, magnetic particles of ferroferric oxide modified by oleic acid (OA-Fe3O4) and dispersed in tetrachloroethylene were used as core material. Polymethyl methacrylate (PMMA) was used as shell material. Magnetic microcapsules were prepared by using a T-MC reactor. Factors that influenced the encapsulated reaction were investigated in details, which included the velocity ratio of aqueous phase to oil phase, the length and the inner diameter of the microchannel. The morphology, composition, and magnetic responsiveness of the magnetic microcapsules were analyzed and characterized by SEM, FTIR, XRD, TGA, and vibrating sample magnetometer (VSM). The results confirmed that magnetic microcapsules prepared by T-MC reactor were regular in shape.
文摘采用光纤激光器在3 mm厚不锈钢薄板上进行非熔透型激光焊试验研究。获得了不锈钢光纤激光深熔焊功率密度阈值所在区间,通过测量表征焊缝横截面尺寸的三参数:表面缝宽、中间熔宽和熔深,分析了激光功率P和焊接速度v在不同改变模式下对焊缝横截面尺寸的影响规律。结果表明,焊接速度为5 cm/s时,功率密度阈值位于3.19~3.61 k W/mm^2区间。相同程度地增大P/v,通过增大功率或降低焊速模式,表面缝宽和熔深均会随之变大,但增加功率更为有效,而对中间熔宽的影响略有不同。当保持P/v不变时,同比例增加功率和焊度,表面缝宽基本不变,中间熔宽增大,而熔深先增加后趋于稳定。采用降低焊速方式可更有效地提高搭接接头拉剪强度。
