Improving flight performance of UAVs by ice shape modulation

Aircraft icing poses a great threat to flight safety.In response to the characteristics of high-power consumption,large volume,and heavy weight of traditional anti-/de-icing technologies,the concept of ice shape modulation is proposed,which is called ice tolerant flight.Firstly,the flight performance of Unmanned Aerial Vehicle(UAV)was compared in three states:no ice,full ice,and modulated ice through flight tests.It was found that ice shape modulation has a significant improvement effect on the aerodynamic performance of aircraft under icing conditions.Under the three modulated ice shape conditions in this experiment,the lift coefficient of the UAV under different ice shape modulation conditions increased by 18%–33%,and the stalling angle was delayed by 3°-5°.Subsequently,the pressure distribution,streamlines in the flow field,and detached vortex distribution of the UAV model in these three states were obtained through numerical simulation,to study the mechanism of ice shape modulation on the aerodynamic performance of aircraft.The simulation found that the reason for the improvement of the wings effect after ice shape modulation is that the modulated area forms a leading-edge protrusion structure similar to a vortex generator.This structure prolongs the mixed flow region on the wings surface and reduces the trend of flow separation,which plays a role in increasing lift and reducing drag for UAVs under icing conditions.Finally,a reverse reachable set that can be used for unexpected state recovery is used as the definition of flight safety boundaries,and an aircraft dynamics model is established to obtain flight safety boundaries for different states.Research has found that the flight safety boundary of the UAV in a no ice state is greater than that in a modulated ice state,and the safety boundary in a modulated ice state is greater than that in a full ice state.Compared with the full ice state,the flight safety boundary after modulation has expanded by 27.0%.The scheme of ice shape modulation can provide a basis for the flight safety of aircraft under icing conditions.

Improving aircraft aerodynamic performance with bionic wing obtained by ice shape modulation

For Unmanned Aerial Vehicles(UAVs)with limited electrical power to achieve effectively anti-/de-icing at the leading edge of the wing,a strategy of ice shape modulation was proposed.Isolated simulated ice shape pieces printed by 3D printing technology are mounted on a NACA0012 finite wing model,and its lift/drag coefficients and suction-side velocity fields are measured by the six-component force balance and the Particle Imaging Velocimetry(PIV),respectively.The ratio of the spanwise length of a single ice shape piece to chord length and the spanwise length of the non-icing area between the two adjacent single ice shape pieces are defined as dimensionless ice shape length(w/c)and dimensionless modulation ratio(w/λ),respectively.The results indicate that for a fixed w/λ,the wing lift coefficient first increases and then drops with increasing w/c,and a peak value exists when w/c is between 0.1 and 0.2.The lower the w/λis,the higher the wing lift coefficient will be.The periodical variation of the flow separation area along the spanwise direction is attributed on the one hand to the acceleration effect of the flow field in the non-icing area which reduces the separation area,and on the other hand to the cross-flow caused by the streamwise vortices from the non-icing area to the icing area which promotes the mixing of the flow field(similar to vortex generators).The obtained modulation law is verified through flight tests and provides guidance for the use of ice shape modulation scheme for UAVs that cannot be completely anti-/deicing under severe weather conditions.

Frequency-doubled triangular shape lightwave generation with a flexible modulation index

An approach for full duty frequency-doubled triangle shape lightwave generation is proposed and demonstrated.It requires a dual-parallel Mach–Zehnder modulator（DP-MZM） driven by a sinusoidal signal. A stop band filter is coupled to filter out two undesired sidebands. By tuning the bias voltage applied to the DP-MZM, the output optical intensity with a full duty cycle triangle shape profile can be obtained. It is found that the required modulation index is no longer a fixed one. It can vary within a range, without degrading the target waveform. The principle is analyzed by theory and evaluated by simulation. A proof-of-concept experiment is also conducted.Good agreements between theoretical prediction and experimental results have been found. This approach might be attractive due to the feature of a variable modulation index, which insures simple operation in practice.

Pulse Generation and Compression Techniques for Microwave Electronics and Ultrafast Systems

Ultrabroadband systems and ultrafast electronics require the generation,transmission,and processing of high-quality ultrashort pulses rang-ing from nanoseconds(ns)to picoseconds(ps),which include well-established and emerging applications of time-domain reflectometry,arbitrary wave-form generation,sampling oscilloscopes,frequency synthesis,through-wall radar imaging,indoor communication,radar surveillance,and medical radar detection.Impulse radar advancements in industrial,scientific,and medical(ISM)domains are,for example,driven by ns-scale-defined ultrawideband(UWB)technologies.Nevertheless,the generation of ultrashort ps-scale pulses is highly desired to achieve unprecedented performances in all these ap-plications and future systems.However,due to the variety and applicability of different pulse generation and compression techniques,the selection of optimum or appropriate pulse generators and compressors is difficult for practitioners and users.To this end,this article aims to provide a comprehen-sive overview of ultrashort ns and ps pulse generation and compression techniques.The proposed and developed pulse generators available in the litera-ture and on the market,which are characterized by their corresponding pros and cons,are also explored.The theoretical analysis of pulse generation us-ing a nonlinear transmission line(NLTL)presented in the literature is briefly explained as well.Additionally,a holistic overview of these pulse genera-tors from the perspective of applications is given to describe their utilization in practical systems.All of these techniques are well summarized and com-pared in terms of fundamental pulse parameters,and research gaps in specified areas are highlighted.A thorough discussion of previous research work on various topologies and techniques is presented,and potential future directions for technical advancement are examined.