Combined hybrid energy storage system and transmission grid model for peak shaving based on time series operation simulation

This study proposes a combined hybrid energy storage system(HESS) and transmission grid(TG) model, and a corresponding time series operation simulation(TSOS) model is established to relieve the peak-shaving pressure of power systems under the integration of renewable energy. First, a linear model for the optimal operation of the HESS is established, which considers the different power-efficiency characteristics of the pumped storage system, electrochemical storage system, and a new type of liquid compressed air energy storage. Second, a TSOS simulation model for peak shaving is built to maximize the power entering the grid from the wind farms and HESS. Based on the proposed model, this study considers the transmission capacity of a TG. By adding the power-flow constraints of the TG, a TSOS-based HESS and TG combination model for peak shaving is established. Finally, the improved IEEE-39 and IEEE-118 bus systems were considered as examples to verify the effectiveness and feasibility of the proposed model.

Potential of Rooftop PV Systems on Weekly Peak Load Shaving in Saudi Arabia

In recent years, high annual increasing load demand in Saudi Arabia has led to large investments in the construction of conventional power plants, which use oil or gas as the main fuel. The government is considering a large deployment of renewable energy for its 2030 vision plan. The Kingdom of Saudi Arabia is one of the best potential candidates for harvesting solar energy because of the country’s geographical location, clear sky, and vast land area. A recent energy policy announced by the government involves harvesting solar photovoltaic (PV) energy to reduce the country’s reliance on fossil fuel and greenhouse gas emissions. Using rooftop PV systems can help to shave the peak load and lead to a significant savings in the power sector through the reduction of annual installation of conventional power plants and standby generators. Employing solar PV at the end user level helps to reduce the overloading of transmission and distribution lines as well as decreases power losses. This paper will provide ratings for different rooftop PV systems that are being considered for installation for customers with various needs. The distribution of PV installation among the customers is as follows: 5% residential, 10% commercial, and 20% government. The effect of PV output power on weekly peak demand has been evaluated. The paper has also investigated the impact of the temperature on PV output power, especially during the summer. The PV power contribution is analyzed based on the assumption that weekly peak power production of solar PV coincides with weekly peak load demand. The PV model is implemented in Matlab to simulate and analyze the PV power.

Optimization dispatching strategy for an energy storage system considering its unused capacity sharing

In renewable energy systems,energy storage systems can reduce the power fluctuation of renewable energy sources and compensate for the prediction deviation.However,if the renewable energy prediction deviation is small,the energy storage system may work in an underutilized state.To efficiently utilize a renewable-energy-sided energy storage system(RES),this study proposed an optimization dispatching strategy for an energy storage system considering its unused capacity sharing.First,this study proposed an unused capacity-sharing strategy for the RES to fully utilize the storage’s unused capacity and elevate the storage’s service efficiency.Second,RES was divided into“deviation-compensating energy storage(DES)”and“sharing energy storage(SES)”to clarify the function of RES in the operation process.Third,this study established an optimized dispatching model to achieve the lowest system operating cost wherein the unused capacity-sharing strategy could be integrated.Finally,a case study was investigated,and the results indicated that the proposed model and algorithm effectively improved the utilization of renewable-energy-side energy storage systems,thereby reducing the total operation cost and pressure on peak shaving.

Peak Shaving Strategy of Concentrating Solar Power Generation Based on Multi-Time-Scale and Considering Demand Response

According to the multi-time-scale characteristics of power generation and demand-side response(DR)resources,as well as the improvement of prediction accuracy along with the approaching operating point,a rolling peak shaving optimization model consisting of three different time scales has been proposed.The proposed peak shaving optimization model considers not only the generation resources of two different response speeds but also the two different DR resources and determines each unit combination,generation power,and demand response strategy on different time scales so as to participate in the peaking of the power system by taking full advantage of the fast response characteristics of the concentrating solar power(CSP).At the same time,in order to improve the accuracy of the scheduling results,the combination of the day-ahead peak shaving phase with scenario-based stochastic programming can further reduce the influence of wind power prediction errors on scheduling results.The testing results have shown that by optimizing the allocation of scheduling resources in each phase,it can effectively reduce the number of starts and stops of thermal power units and improve the economic efficiency of system operation.The spinning reserve capacity is reduced,and the effectiveness of the peak shaving strategy is verified.

Applications of Lithium-Ion Batteries in Grid-Scale Energy Storage Systems

In the electrical energy transformation process,the grid-level energy storage system plays an essential role in balancing power generation and utilization.Batteries have considerable potential for application to grid-level energy storage systems because of their rapid response,modularization,and flexible installation.Among several battery technologies,lithium-ion batteries(LIBs)exhibit high energy efficiency,long cycle life,and relatively high energy density.In this perspective,the properties of LIBs,including their operation mechanism,battery design and construction,and advantages and disadvantages,have been analyzed in detail.Moreover,the performance of LIBs applied to grid-level energy storage systems is analyzed in terms of the following grid services:(1)frequency regulation;(2)peak shifting;(3)integration with renewable energy sources;and(4)power management.In addition,the challenges encountered in the application of LIBs are discussed and possible research directions aimed at overcoming these challenges are proposed to provide insight into the development of grid-level energy storage systems.

Peak shaving operation optimization of high proportion new energypower generation considering wind-solar complementationand source-load coupling

To optimize peaking operation when high proportion new energy accesses to power grid,evaluation indexes are proposed which simultaneously consider wind-solar complementation and source-load coupling.A typical wind-solar power output scene model based on peaking demand is established which has anti-peaking characteristic.This model uses balancing scenes and key scenes with probability distribution based on improved Latin hypercube sampling(LHS)algorithm and scene reduction technology to illustrate the influence of wind-solar on peaking demand.Based on this,a peak shaving operation optimization model of high proportion new energy power generation is established.The various operating indexes after optimization in multi-scene peaking are calculated,and the ability of power grid peaking operation is compared whth that considering wind-solar complementation and source-load coupling.Finally,a case of high proportion new energy verifies the feasibility and validity of the proposed operation strategy.

Collaborative optimization model of renewable energy development considering peak shaving costs of various flexibility resources

China has set carbon emission goals for 2030 and 2060.Renewable energy sources,primarily wind and photovoltaic power,are being considered as the future of power generation.The major limitation to the development of new energies is the limited flexibility of regulations on power system resources,resulting in insufficient consumption capacity.Thus,the flexible resource costs for peak shaving as well as the reasonable coordinated development and operation optimization of regional renewable energy need to be considered.In this study,a renewable energy development layout configuration analysis method was established by considering the composite cost of a power system,comprehensively analyzing the potential of various flexibility regulation resources for the power system and its composite peak shaving cost,and combining renewable energy output characteristics,load forecasting,grid development,and other factors.For the optimization of various flexible resource utilization methods,a peak shaving cost estimation method from the perspective of the entire power system was established by combining the on-grid electricity prices and operating costs of different power sources.A collaborative optimization model of power system operation that aims at the lowest peak shaving cost and satisfies the constraints of operation,safety,and environmental protection was proposed.Finally,a certain area of Gansu Province was used as an example to perform detailed analysis and calculation,which demonstrated that the model has an optimal effect.This model can provide an analysis method for regional renewable energy development layout configurations and system optimization operations.

Power management in co-phase traction power supply system with super capacitor energy storage for electrified railways

Increasing railway traffic and energy utilization issues prompt electrified railway systems to be more economical,efficient and sustainable.As regenerative braking energy in railway systems has huge potential for optimized utilization,a lot of research has been focusing on how to use the energy efficiently and gain sustainable benefits.The energy storage system is an alternative because it not only deals with regenerative braking energy but also smooths drastic fluctuation of load power profile and optimizes energy management.In this work,we propose a co-phase traction power supply system with super capacitor(CSS_SC)for the purpose of realizing the function of energy management and power quality management in electrified railways.Besides,the coordinated control strategy is presented to match four working modes,including traction,regenerative braking,peak shaving and valley filling.A corresponding simulation model is built in MATLAB/Simulink to verify the feasibility of the proposed system under dynamic working conditions.The results demonstrate that CSS_SC is flexible to deal with four different working conditions and can realize energy saving within the allowable voltage unbalance of 0.008%in simulation in contrast to 1.3%of the standard limit.With such a control strategy,the performance of super capacitor is controlled to comply with efficiency and safety constraints.Finally,a case study demonstrates the improvement in power fluctuation with the valley-to-peak ratio reduced by 20.3%and the daily load factor increased by 17.9%.

Synthesis and Characterization of a Novel Bamboo Shaving Geopolymer Composite

Geopolymers are inorganic aluminosilicate materials,which have been a great research interest as a material for sustainable development.However,they possess relatively low toughness properties similar to brittle solids.The limitation may be altered by fiber reinforcement to improve their strength and toughness.This research describes the synthesis of bamboo shaving(BS)reinforced geopolymer composites and the characterization of their mechanical properties.The effect of BS content(0–2 wt.%)on the physical and mechanical properties and microstructure of metakaolin based geopolymer paste were investigated.The workability,setting time,bulk density,apparent porosity,thermal conductivity,compressive strength,flexural strength,scanning electron microscopy(SEM),and X-ray diffraction(XRD)of geopolymer paste were determined.The results showed that the workability,setting time,density,and thermal conductivity decreased with the increasing of BS content.The BS content was proportional to the apparent porosity and a good linear relation was found between apparent porosity and BS content.The highest mechanical properties were achieved at an optimum BS content of 1.0 wt.%.The results of microstructural analysis revealed that BS act as inforcing phase in matrix,reducing cracks and making a dense geopolymer,which leads to favorable adhesion of the composites and produces a geopolymer composite with better mechanical properties than that of pure geopolymer.However,when the BS content exceeded 1.0 wt.%,interfacial bonding between BS and geopolymer matrix became less.XRD analysis showed that BS has little effect on the mineral composition of metakaolin-based geopolymer and no new phase is formed.

Design and Manufacture of the Shaving Cutter with Unequal Depth Gashes

Gear shaving is a gear finishing operation of high efficiency and high precision. After shaved by shaving cutter of true involute profile, there are the "mid-concave" phenomena around the pitch points of the work gear tooth flanks inevitably. This problem severely affects the shaving accuracy and gear transmission quality, which hasn’t been resolved thoroughly for a long time. Aiming at the problem, based on shaving mechanism and the analysis on gear tooth profile mid-concave, a new-style shaving cutter with unequal depth gashes is designed and manufactured. As compared with common shaving cutter, its depth of gashes is zero on the pitch points of tooth profiles and gradually gets deeper to max. from pitch points to the tops of teeth or the roots. Because of no depth on the pitch points, there are no cutting edges, that is, no cutting action, so the work gear isn’t cutted around its pitch points and is only pressed during shaving operation. Therefore, the gear tooth errors are decreased greatly. And the experimentations have proved the shaved gear has better surface finish that achieves the expectant effect. In addition, this paper analyses the forming of gash on the basis of slotting principle, and proposes a design method of gash: gash bottom is formed by two involutes which intersect on the pitch point and are concentric with the base circle of involute profile of cutter. Furthermore, the equations of the two involutes are deduced and the solution is introduced. This paper analyses the forming of gash on the basis of slotting principle, and proposes a gash-designing method. And the experiment has proved that the shaved gear has better surface finish that achieves the anticipated effect.

Elevated Temperature Properties of Bamboo Shaving Reinforced Geopolymer Composites

Geopolymer is a new alternative cement binder to produce concrete.In the present study,a novel geopolymer composites containing bamboo shaving(0–2 wt.%)were fabricated and exposed to the temperatures of 200℃,400℃,600℃and 800℃.Physical properties,micro-structure,and mechanical strengths of the geopolymer composites were evaluated before and after heating in order to understand their thermal properties,which are essential for the use as building materials.As the temperature rises,the drying shrinkage and apparent porosity of the composites increase,while the compressive and bending strengths decrease.At the temperature range of 200℃–800℃,the residual compressive strength rates of the geopolymer composite containning 2 wt.%bamboo shaving were respective 73.8%,61.47%,56.16%,and 29.56%,meanwhile,the residual flexural strength rates were respective 46.69%,8.68%,2.52%,and 2.33%.Correspondingly,the residual compressive strength rates of pure geopolymer were respective 72.81%,61.99%,54.55%,and 14.64%;the residual flexural strength rates were 48.87%,5.69%,3.22%,and 2.47%,respectively.Scanning electron microscope(SEM),optical microscope,and X-ray diffractometry(XRD)were applied to find the microscopic changes.The strength loss in the geopolymer composites was mainly because of the thermal degradation of bamboo shaving and shrinkage of geopolymer matrix.Bamboo shaving has great potential as reinforcer in developing low-cost geopolymer composites and may be used for applications up to 400℃.

Design of Plunge Shaving Cutters for Finishing internal Gears

The mathematical model of tooth flanks of a plunge shaving cutter for finishing internal gears is established, and the correction to tooth profile and tooth curve of the cutter is proposed. Moreover, the tooth profile error and the convex tooth curve of internal gears, when the cutter is not modified, are offered, and then a simple, convenient, reliable and practical method to design and finish convex teeth of internal gears is presented.

Determination of PCDD/F Levels in Wood Shavings Used as Bedding Material for Poultry Production

During 2006 and 2011, following the implementation of dioxin contamination monitoring in poultry meat, levels higher than legally allowed in meat from poultry slaughtered for human consumption, were found. The wood shavings used as bedding material in the poultry farm showed considerable high contaminations, indicating that these materials were the likely source of contamination of the animals. Wood shavings samples (n = 23), used as poultry litters in intensive farms of broilers, were analysed. In both episodes, contamination profiles of higher and lower concentrations, seem to be very similar, being OCDD, OCDF, 1,2,3,4,6,7,8-HpCDD and 1,2,3,4,6,7,8-HpCDF responsible for 97.4 % of the total contamination. The present work describes the analytical adapted, used methodology and the specific clean-up procedures, which revealed that recoveries of 13C12-Labelled compounds added to the wood shavings samples ranged from 71.3% to 86.3%.

Influence of Shaving Behavior on Skin Physiological Properties and Sensory Discomfort of Chinese Men

Men's facial skin is ubiquitously affected by their shaving behaviors. Skin physiological parameters and the degree of discomfort were investigated on healthy Chinese male volunteers. The effect of immediate shaving and long-term shaving was compared, and more parameters such as skin integrity, pigmentation and texture were significantly influenced by long-term shaving. Sensory assessment also showed severer discomfort degree after long-term shaving. The results indicated that long-term shaving has more impact on skin condition than immediate shaving. Furthermore, the skin damage caused by shaving can be relieved by appropriate shaving care habits.

Numerical Simulation of Combustion in 660MWTangentially Fired Pulverized Coal Boiler on Ultra-Low Load Operation

In this paper,the combustion conditions in the boiler furnace of a 660 MWtangential fired pulverized coal boiler are numerically simulated at 15%and 20%rated loads,to study the flexibility of coal-fired power units on ultra-low load operation.The numerical results show that the boiler can operate safely at 15%and 20%ultra-low loads,and the combustion condition in the furnace is better at 20%load,and the tangent circles formed by each characteristic section in the furnace are better,and when the boiler load is decreased to 15%,the tangent circles in the furnace begin to deteriorate.The average flue gas temperature of different areas of the furnace shows that when the boiler furnace operates under ultra-low load conditions,the average smoke temperature of the cold ash hopper at 20%load is basically the same as the average smoke temperature at 15%load;in the burner area,the average smoke temperature of the cold ash hopper at 20%load is about 50 K higher than that at 15%load;in the burned out area,the average smoke temperature of the cold ash hopper at 20%load is slightly higher than that at 15%load.The average temperature of flue gas in the furnace showed a tendency to increase rapidly with the height of the furnace,then slow down and fluctuate the temperature in the burner area,and finally increase slightly in the burnout area due to the further combustion of combustible components to release heat,and then began to decrease.

Electric vehicle optimal scheduling method considering charging piles matching based on edge intelligence

To adress the problems of insufficient consideration of charging pile resource limitations,discrete-time scheduling methods that do not meet the actual demand and insufficient descriptions of peak-shaving response capability in current electric vehicle(EV)opti-mization scheduling,edge intelligence-oriented electric vehicle optimization scheduling and charging station peak-shaving response capability assessment methods are proposed on the basis of the consideration of electric vehicle and charging pile matching.First,an edge-intelligence-oriented electric vehicle regulation frame for charging stations is proposed.Second,continuous time variables are used to represent the available charging periods,establish the charging station controllable EV load model and the future available charging pile mathematical model,and establish the EV and charging pile matching matrix and constraints.Then,with the goal of maximizing the user charging demand and reducing the charging cost,the charging station EV optimal scheduling model is established,and the EV peak response capacity assessment model is further established by considering the EV load shifting constraints under different peak response capacities.Finally,a typical scenario of a real charging station is taken as an example for the analysis of optimal EV scheduling and peak shaving response capacity,and the proposed method is compared with the traditional method to verify the effectiveness and practicality of the proposed method.

Dispatchable Capability of Aggregated Electric Vehicle Charging in Distribution Systems

This paper introduces a method for modeling the entire aggregated electric vehicle(EV)charging process and analyzing its dispatchable capabilities.The methodology involves developing a model for aggregated EV charging at the charging station level,estimating its physical dispatchable capability,determining its economic dispatchable capability under economic incentives,modeling its participation in the grid,and investigating the effects of different scenarios and EV penetration on the aggregated load dispatch and dispatchable capability.The results indicate that using economic dispatchable capability reduces charging prices by 9.7%compared to physical dispatchable capability and 9.3%compared to disorderly charging.Additionally,the peak-to-valley difference is reduced by 64.6%when applying economic dispatchable capability with 20%EV penetration and residential base load,compared to disorderly charging.

《综合英语1》模拟试题(4)

PART ONEⅠ.用适当的语法形式或词汇填空。从[A]、[B]、[C]、[D]四个选项中,选出一个正确答案。(本大题共30小题,每小题1分,共30分)1. Doctors _parents to give their childrenhealthier snacks such as fruit, vegetables, and juice.A. inform B. teachC. advise D. help2. He knew that a promotion was_.

星点设计-效应面试验优化复方竹茹植物固体饮料的处方

为优化以竹茹(Bamboo shavings)、陈皮、茯苓(Poria cocos)、白茅根、干姜为原料制成的复方竹茹植物固体饮料的处方,以颗粒成型率、水分、休止角等为评价指标,通过单因素试验和星点设计-效应面试验考察稀释剂配比(甘露醇∶糊精)、稀释剂用量(干膏粉∶稀释剂),确定固体饮料的最佳工艺处方,并采用湿法制粒法制备复方竹茹植物固体饮料。结果表明,复方竹茹植物固体饮料的最佳成型工艺参数为稀释剂配比为2.3∶1,稀释剂用量为1.5∶1。该工艺条件下,颗粒成型率达94.30%,水分为1.44%,流动性好,研究可为复方竹茹植物固体饮料的工业化生产提供理论依据。

Battery Technologies for Grid-Level Large-Scale Electrical Energy Storage

Grid-level large-scale electrical energy storage(GLEES) is an essential approach for balancing the supply–demand of electricity generation, distribution, and usage. Compared with conventional energy storage methods, battery technologies are desirable energy storage devices for GLEES due to their easy modularization, rapid response, flexible installation, and short construction cycles. In general, battery energy storage technologies are expected to meet the requirements of GLEES such as peak shaving and load leveling, voltage and frequency regulation, and emergency response, which are highlighted in this perspective. Furthermore, several types of battery technologies, including lead–acid, nickel–cadmium, nickel–metal hydride, sodium–sulfur, lithium-ion, and flow batteries, are discussed in detail for the application of GLEES. Moreover, some possible developing directions to facilitate efforts in this area are presented to establish a perspective on battery technology, provide a road map for guiding future studies, and promote the commercial application of batteries for GLEES.