The measured data and simulation test phenomenon of surrounding rock deformation and failure at the project site indicate that shear failure which firstly occurs in surrounding rock, block slip and second shear failur...The measured data and simulation test phenomenon of surrounding rock deformation and failure at the project site indicate that shear failure which firstly occurs in surrounding rock, block slip and second shear failure are the root cause of deformation and damage of supporting structure of the surrounding rock at a large scale. We derived limit load of surrounding rock shear slip failure and reasonable support resistance of given load by means of shear slip line field theory, discussed the main factors which influence the limit load of surrounding rock. Shear slip line field and limit load of circular tunnel surrounding rock were obtained by means of physical simulation test, which agreed well with the theoretical analysis results. Based on the theoretical analysis and physical simulation test, the cause deformation and failure at large scale of Xinshanghai No. 1 coal mine big section ingate was analyzed, and the shear failure resistance and block slip in surrounding rock were proposed as the core technical supporting ideas. Proper range of supporting resistance which came from calculation was suggested. The support scheme which is mainly composed of large grouting anchor, sprayed anchor net support technique and full-face grille concrete finally ended the dilemma of repeated failure and mending of ingate and created critical conditions for smooth production in the coal mine.展开更多
1 Introduction Nanoparticles are widely found in the ductile shear zone and it is considered to have a close relation with faulting.The sizes of these nanoparticles are generallyless than 100 nm.They have a variety of...1 Introduction Nanoparticles are widely found in the ductile shear zone and it is considered to have a close relation with faulting.The sizes of these nanoparticles are generallyless than 100 nm.They have a variety of morphologies like globular structure rod-like and tubular,by the order aggregating of these nanoparticles various aggregations展开更多
Laminated elastomeric bearings have been widely used for small-to-medium-span highway bridges in China, in which concrete shear keys are set transversely to prohibit large girder displacement. To evaluate bridge seism...Laminated elastomeric bearings have been widely used for small-to-medium-span highway bridges in China, in which concrete shear keys are set transversely to prohibit large girder displacement. To evaluate bridge seismic responses more accurately, proper analytical models of bearings and shear keys should be developed. Based on a series of cyclic loading experiments and analyses, rational analytical models of laminated elastomeric bearings and shear keys, which can consider mechanical degradation, were developed. The effect of the mechanical degradation was investigated by examining the seismic response of a small-to-medium-span bridge in the transverse direction under a wide range of peak ground accelerations(PGA). The damage mechanism for small-to-medium-span highway bridges was determined, which can explain the seismic damage investigation during earthquakes in recent years. The experimental results show that the mechanical properties of laminated elastomeric bearings will degrade due to friction sliding, but the degree of decrease is dependent upon the influencing parameters. It can be concluded that the mechanical degradation of laminated elastomeric bearings and shear keys play an important role in the seismic response of bridges. The degradation of mechanical properties of laminated elastomeric bearings and shear keys should be included to evaluate more precise bridge seismic performance.展开更多
High spin states in the odd-A nucleus 113^In have been investigated using the re- action 110^Pd(7^Li, 4n) at a beam energy of 50 MeV. A new positive parity dipole band with the configuration of π(g9/2)^-lv(h11/2...High spin states in the odd-A nucleus 113^In have been investigated using the re- action 110^Pd(7^Li, 4n) at a beam energy of 50 MeV. A new positive parity dipole band with the configuration of π(g9/2)^-lv(h11/2)^2 v (g7/2)^2 is established. The effective interaction V(θ) values of this band have been successfully described by a semiclassical geometric model based on shear mechanism, which show that the dipole band has the characteristics of magnetic rotation. In addition the collective rotational angular momentum for this band is extracted. The results show that the core contribution increases gradually with the increase of the rotation frequency.展开更多
Based on experimental data obtained from triaxial tests and a hydrostatic test, a cup model was formulated. Two plastic mechanisms, respectively a deviatoric shearing and a pore collapse, are taken into account. This ...Based on experimental data obtained from triaxial tests and a hydrostatic test, a cup model was formulated. Two plastic mechanisms, respectively a deviatoric shearing and a pore collapse, are taken into account. This model also considers the influence of confining pressure. In this paper, the calibration of the model is detailed and numerical simulations of the main mechanical behavior of cement paste over a large range of stress are described, showing good agreement with experimental results. The ease study shows that this cup model has extensive applicability for cement-based materials and other quasi-brittle and high-porosity materials in a complex stress state.展开更多
Using the new two-dimensional cranking relativistic mean field (RMF) approach, the shears mechanism of magnetic rotation based on configuration πh121/2νh-211/2 in 142Gd is microscopically and self-consistently exami...Using the new two-dimensional cranking relativistic mean field (RMF) approach, the shears mechanism of magnetic rotation based on configuration πh121/2νh-211/2 in 142Gd is microscopically and self-consistently examined by investigating the aligning angular momenta of the valence nucleons.展开更多
By analyzing the gap between China and foreign countries in fine wool production, combined with the practical experience of fine woolproduction, the application effects of sheep clothing full coverage technology, mech...By analyzing the gap between China and foreign countries in fine wool production, combined with the practical experience of fine woolproduction, the application effects of sheep clothing full coverage technology, mechanical shearing technology, wool grading and collection technology, scale packaging technology and standardized shearing environment control technique were evaluated, in order to provide reference for popularization and application of fine wool production.展开更多
In order to investigate the draping behavior of non-crimp fabrics(NCFs), two types of carbon NCFs with tricot-chain stitches or chain stitches were formed on a hemispherical mould via a stretch forming process. The ...In order to investigate the draping behavior of non-crimp fabrics(NCFs), two types of carbon NCFs with tricot-chain stitches or chain stitches were formed on a hemispherical mould via a stretch forming process. The shear angle and forming defects of the fabrics were measured on the hemisphere, under different blank holder forces(BHFs). The results showed that increasing BHF could enhance the shear angle slightly, reduce the asymmetry for the deformation of the fabrics, and change the main type of the process-induced defects. Besides, compression tests were performed on the corresponding composite components. By analyzing the change of fiber volume fraction and structural parameters of the textile reinforcements, the effects of draping behavior of NCFs on the mechanical performance of the composites were studied. The results reveal that draping process has distinguishable impacts on the mechanical properties of the final components, which is closely related to the stitching pattern of the NCFs.展开更多
The effects of Mn addition(0.005,0.01,0.03,0.05,and 0.07 wt.%)on microstructure,shear mechanical behavior,and interfacial thermal stabilities of SAC305 joints were investigated under isothermal aging temperatures of 1...The effects of Mn addition(0.005,0.01,0.03,0.05,and 0.07 wt.%)on microstructure,shear mechanical behavior,and interfacial thermal stabilities of SAC305 joints were investigated under isothermal aging temperatures of 170 C with different aging time(0,250,500,and 750 h).It is found that Mn addition can increase fracture energy of joints without decreasing the shear strength.And the microstructures have transformed from the eutectic net-like structure in SAC305 solder joints into the structures based onβ-Sn matrix with intermetallic compounds(IMCs)distributed.By doping 0.07 wt.%Mn,the Cu_(6)Sn_(5) growth along the SAC305/Cu interface during thermal aging can be inhibited to some extent.During isothermal aging at 170°C,the maximum shear force of solder joint decreases continuously with aging time increasing,while the fracture energy rises first and then decreases,reaching the maximum at 500 h compared by that with the microstructure homogenization.Cu_(3)Sn growth between Cu_(3)Sn_(5)/Cu interface has been retarded most at the aging time of 250 h with 0.07 wt.%Mn-doped joints.With the aging time prolonging,the inhibition effect of Mn on CusSn IMC layer becomes worse.The strengthening effect of Mn can be explained by precipitation strengthening,and its mechanical behavior can be predicted by particle strengthening model proposed by Orowan.展开更多
This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional(2D) plain weave fabric(PWF) composite accounting for the interaction of orthogonal interlacing strands with coupled s...This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional(2D) plain weave fabric(PWF) composite accounting for the interaction of orthogonal interlacing strands with coupled shear deformation modes including not only relative bending but also torsion,etc.The two orthogonal yarns in a micromechanical unit cell are idealized as curved beams with a path depicted by using sinusoidal shape functions.The internal forces and macroscopic deformations carried by the yarn families,together with macroscopic shear modulus of PWFs are derived by means of a strain energy approach founded on micromechanics.Three sets of experimental data pertinent to three kinds of 2D orthogonal PWF composites have been implemented to validate the new model.The calculations from the new model are also compared with those by using two models in the earlier literature.It is shown that the experimental results correlate well with predictions from the new model.展开更多
Bulk metallic glasses(BMGs)have attracted considerable attention in the last few decades particularly triggered by their potential applications as novel structural and/or functional materials,owing to their superior...Bulk metallic glasses(BMGs)have attracted considerable attention in the last few decades particularly triggered by their potential applications as novel structural and/or functional materials,owing to their superior strength,large elastic strain limit and relatively low Young′s modulus etc.compared to their crystalline counterparts.Here,a 3Dreconstruction application to the fractography and the morphology of shear bands was reported for a ductile Zr_(56)Co_(28)Al_(16)(at.%)BMG through a Phenom series desktop scanning electron microscope.The results of the 3Dreconstruction and the following contour analysis indicate a typical shear fracture mode for the investigated alloy.It is inferred that the fractography and the morphology of shear bands might be dependent on their composition,structure states,and loading conditions for BMGs.展开更多
Magnetic rotation in 82Rb has been investigated for the first time by g-factor measurement of intra-band states of the magnetic-rotational band built on the 11- state. The g-factors were measured by a TMF-IMPAD method...Magnetic rotation in 82Rb has been investigated for the first time by g-factor measurement of intra-band states of the magnetic-rotational band built on the 11- state. The g-factors were measured by a TMF-IMPAD method and calculated by a semi-classical model of independent particle angular momentum coupling assumption. The g-factors and deduced shears angles decrease with the increasing of spin along the band, illustrating a step-by-step alignment of the valence protons and neutrons. The rapid alignment of the valence neutrons leads to a decrease of g-factors. The present results vividly reveal the shears mechanism of magnetic rotation.展开更多
基金Financial support towards this work was provided by the Jiangsu Province Ordinary College Graduate Student Research Innovative Projects (No. CXZZ12_0938)the National Natural Science Foundation of China (Nos. 51074162, 51179189 and 51174197)the Eleventh Five-Year Technology Support Program (No.2008BAB36B07)
文摘The measured data and simulation test phenomenon of surrounding rock deformation and failure at the project site indicate that shear failure which firstly occurs in surrounding rock, block slip and second shear failure are the root cause of deformation and damage of supporting structure of the surrounding rock at a large scale. We derived limit load of surrounding rock shear slip failure and reasonable support resistance of given load by means of shear slip line field theory, discussed the main factors which influence the limit load of surrounding rock. Shear slip line field and limit load of circular tunnel surrounding rock were obtained by means of physical simulation test, which agreed well with the theoretical analysis results. Based on the theoretical analysis and physical simulation test, the cause deformation and failure at large scale of Xinshanghai No. 1 coal mine big section ingate was analyzed, and the shear failure resistance and block slip in surrounding rock were proposed as the core technical supporting ideas. Proper range of supporting resistance which came from calculation was suggested. The support scheme which is mainly composed of large grouting anchor, sprayed anchor net support technique and full-face grille concrete finally ended the dilemma of repeated failure and mending of ingate and created critical conditions for smooth production in the coal mine.
基金supported by Natural Science Foundation of China(Project No.41206035,41602231)The National Nature Science Foundation of Guangdong Province(Project No.2015A030313157)
文摘1 Introduction Nanoparticles are widely found in the ductile shear zone and it is considered to have a close relation with faulting.The sizes of these nanoparticles are generallyless than 100 nm.They have a variety of morphologies like globular structure rod-like and tubular,by the order aggregating of these nanoparticles various aggregations
基金Project of China International Science and Technology Cooperation under Grant No.2009DFA82480Science and Technology Project of Communications’ Construction in Western China,MOC under Grant No.2009318223094
文摘Laminated elastomeric bearings have been widely used for small-to-medium-span highway bridges in China, in which concrete shear keys are set transversely to prohibit large girder displacement. To evaluate bridge seismic responses more accurately, proper analytical models of bearings and shear keys should be developed. Based on a series of cyclic loading experiments and analyses, rational analytical models of laminated elastomeric bearings and shear keys, which can consider mechanical degradation, were developed. The effect of the mechanical degradation was investigated by examining the seismic response of a small-to-medium-span bridge in the transverse direction under a wide range of peak ground accelerations(PGA). The damage mechanism for small-to-medium-span highway bridges was determined, which can explain the seismic damage investigation during earthquakes in recent years. The experimental results show that the mechanical properties of laminated elastomeric bearings will degrade due to friction sliding, but the degree of decrease is dependent upon the influencing parameters. It can be concluded that the mechanical degradation of laminated elastomeric bearings and shear keys play an important role in the seismic response of bridges. The degradation of mechanical properties of laminated elastomeric bearings and shear keys should be included to evaluate more precise bridge seismic performance.
基金supported by National Natural Science Foundation of China (Nos.10105003,11075064,11075214,10927507)the Specialized Research Fund for the Doctoral Programme of Higher Education of China (No.20050183008)National Basic Research Programme of China (No.2007CB815005)
文摘High spin states in the odd-A nucleus 113^In have been investigated using the re- action 110^Pd(7^Li, 4n) at a beam energy of 50 MeV. A new positive parity dipole band with the configuration of π(g9/2)^-lv(h11/2)^2 v (g7/2)^2 is established. The effective interaction V(θ) values of this band have been successfully described by a semiclassical geometric model based on shear mechanism, which show that the dipole band has the characteristics of magnetic rotation. In addition the collective rotational angular momentum for this band is extracted. The results show that the core contribution increases gradually with the increase of the rotation frequency.
基金supported by the National Natural Science Foundation of China (Grant No.50808066)the Scientific Research Foundation for Returned Overseas Chinese Scholars
文摘Based on experimental data obtained from triaxial tests and a hydrostatic test, a cup model was formulated. Two plastic mechanisms, respectively a deviatoric shearing and a pore collapse, are taken into account. This model also considers the influence of confining pressure. In this paper, the calibration of the model is detailed and numerical simulations of the main mechanical behavior of cement paste over a large range of stress are described, showing good agreement with experimental results. The ease study shows that this cup model has extensive applicability for cement-based materials and other quasi-brittle and high-porosity materials in a complex stress state.
基金Supported by National Natural Science Foundation of China (10705004, 10435010, 10221003)
文摘Using the new two-dimensional cranking relativistic mean field (RMF) approach, the shears mechanism of magnetic rotation based on configuration πh121/2νh-211/2 in 142Gd is microscopically and self-consistently examined by investigating the aligning angular momenta of the valence nucleons.
基金Supported by Special Fund for Agricultural Science and Technology Innovation Project in Gansu Province(GNCX-2014-48)
文摘By analyzing the gap between China and foreign countries in fine wool production, combined with the practical experience of fine woolproduction, the application effects of sheep clothing full coverage technology, mechanical shearing technology, wool grading and collection technology, scale packaging technology and standardized shearing environment control technique were evaluated, in order to provide reference for popularization and application of fine wool production.
基金Funded by the National Natural Science Foundation of China(No.51203144)
文摘In order to investigate the draping behavior of non-crimp fabrics(NCFs), two types of carbon NCFs with tricot-chain stitches or chain stitches were formed on a hemispherical mould via a stretch forming process. The shear angle and forming defects of the fabrics were measured on the hemisphere, under different blank holder forces(BHFs). The results showed that increasing BHF could enhance the shear angle slightly, reduce the asymmetry for the deformation of the fabrics, and change the main type of the process-induced defects. Besides, compression tests were performed on the corresponding composite components. By analyzing the change of fiber volume fraction and structural parameters of the textile reinforcements, the effects of draping behavior of NCFs on the mechanical performance of the composites were studied. The results reveal that draping process has distinguishable impacts on the mechanical properties of the final components, which is closely related to the stitching pattern of the NCFs.
基金support received from Yunnan Fundamental Research Projects(Grant No.202101BC070001-007)the Jiangsu Province Industry-University-Research Cooperation Project(No.BY2022832)the National Natural Science Foundation of China(No.52275339).
文摘The effects of Mn addition(0.005,0.01,0.03,0.05,and 0.07 wt.%)on microstructure,shear mechanical behavior,and interfacial thermal stabilities of SAC305 joints were investigated under isothermal aging temperatures of 170 C with different aging time(0,250,500,and 750 h).It is found that Mn addition can increase fracture energy of joints without decreasing the shear strength.And the microstructures have transformed from the eutectic net-like structure in SAC305 solder joints into the structures based onβ-Sn matrix with intermetallic compounds(IMCs)distributed.By doping 0.07 wt.%Mn,the Cu_(6)Sn_(5) growth along the SAC305/Cu interface during thermal aging can be inhibited to some extent.During isothermal aging at 170°C,the maximum shear force of solder joint decreases continuously with aging time increasing,while the fracture energy rises first and then decreases,reaching the maximum at 500 h compared by that with the microstructure homogenization.Cu_(3)Sn growth between Cu_(3)Sn_(5)/Cu interface has been retarded most at the aging time of 250 h with 0.07 wt.%Mn-doped joints.With the aging time prolonging,the inhibition effect of Mn on CusSn IMC layer becomes worse.The strengthening effect of Mn can be explained by precipitation strengthening,and its mechanical behavior can be predicted by particle strengthening model proposed by Orowan.
基金National Natural Science Foundation of China(51075019)Aeronautical Science Foundation of China (20095251024)
文摘This paper proposes a new analytical solution to predict the shear modulus of a two-dimensional(2D) plain weave fabric(PWF) composite accounting for the interaction of orthogonal interlacing strands with coupled shear deformation modes including not only relative bending but also torsion,etc.The two orthogonal yarns in a micromechanical unit cell are idealized as curved beams with a path depicted by using sinusoidal shape functions.The internal forces and macroscopic deformations carried by the yarn families,together with macroscopic shear modulus of PWFs are derived by means of a strain energy approach founded on micromechanics.Three sets of experimental data pertinent to three kinds of 2D orthogonal PWF composites have been implemented to validate the new model.The calculations from the new model are also compared with those by using two models in the earlier literature.It is shown that the experimental results correlate well with predictions from the new model.
基金supported by National Natural Science Foundation of China(51301078,51461026and51671120)the Specialized Research Fund for the Doctoral Program of Higher Education of China(20135314120002)+1 种基金the Scientific Research Foundation of Department of Education,Yunnan(2017YJS059)the Young Talents Support Program of Faculty of Materials Science and Engineering,Kunming University of Science and Technology(20140102)
文摘Bulk metallic glasses(BMGs)have attracted considerable attention in the last few decades particularly triggered by their potential applications as novel structural and/or functional materials,owing to their superior strength,large elastic strain limit and relatively low Young′s modulus etc.compared to their crystalline counterparts.Here,a 3Dreconstruction application to the fractography and the morphology of shear bands was reported for a ductile Zr_(56)Co_(28)Al_(16)(at.%)BMG through a Phenom series desktop scanning electron microscope.The results of the 3Dreconstruction and the following contour analysis indicate a typical shear fracture mode for the investigated alloy.It is inferred that the fractography and the morphology of shear bands might be dependent on their composition,structure states,and loading conditions for BMGs.
基金Supported by National Natural Science Foundation of China (10435010, 10375093)
文摘Magnetic rotation in 82Rb has been investigated for the first time by g-factor measurement of intra-band states of the magnetic-rotational band built on the 11- state. The g-factors were measured by a TMF-IMPAD method and calculated by a semi-classical model of independent particle angular momentum coupling assumption. The g-factors and deduced shears angles decrease with the increasing of spin along the band, illustrating a step-by-step alignment of the valence protons and neutrons. The rapid alignment of the valence neutrons leads to a decrease of g-factors. The present results vividly reveal the shears mechanism of magnetic rotation.