Mobile bed thickness in skewed asymmetric oscillatory sheet flows

A new instantaneous mobile bed thickness model is presented for sediment transport in skewed asymmetric oscillatory sheet flows. The proposed model includes a basic bed load part and a suspended load part related to the Shields parameter, and takes into account the effects of mass conservation, phase-lag, and asymmetric boundary layer development, which are important in skewed asymmetric flows but usually absent in classical models. The proposed model is validated by erosion depth and sheet flow layer thickness data in both steady and unsteady flows, and applied to a new instantaneous sediment transport rate formula. With higher accuracy than classical empirical models in steady flows, the new formula can also be used for instantaneous sediment transport rate prediction in skewed asymmetric oscillatory sheet flows.

A numerical study for boundary layer current and sheet flow transport induced by a skewed asymmetric wave

An analytical model with essential parameters given by a two-phase numerical model is utilized to study the net boundary layer current and sediment transport under skewed asymmetric oscillatory sheet flows. The analytical model is the first instantaneous type model that can consider phase-lag and asymmetric boundary layer development. The two-phase model supplies the essential phase-lead, instantaneous erosion depth and boundary layer development for the analytical model to enhance the understanding of velocity skewness and acceleration skewness in sediment flux and transport rate. The sediment transport difference between onshore and offshore stages caused by velocity skewness or acceleration skewness is shown to illustrate the determination of net sediment transport by the analytical model. In previous studies about sediment transport in skewed asymmetric sheet flows, the generation of net sediment transport is mainly concluded to the phase-lag effect.However, the phase-lag effect is shown important but not enough for the net sediment transport, while the skewed asymmetric boundary layer development generated net boundary layer current and mobile bed effect are key important in the transport process.

MHD stagnation-point flow and heat transfer towards stretching sheet with induced magnetic field

The problem of the steady magnetohydrodynamic （MHD） stagnation-point flow of an incompressible viscous fluid over a stretching sheet is studied. The effect of an induced magnetic field is taken into account. The nonlinear partial differential equations are transformed into ordinary differential equations via the similarity transformation. The transformed boundary layer equations are solved numerically using the shooting method. Numerical results are obtained for various magnetic parameters and Prandtl numbers. The effects of the induced magnetic field on the skin friction coefficient, the local Nusselt number, the velocity, and the temperature profiles are presented graphically and discussed in detail.

MHD flow of a viscous fluid on a nonlinear porous shrinking sheet with homotopy analysis method

The present paper investigates the magnetohydrodynamic（MHD） flow of a viscous fluid towards a nonlinear porous shrinking sheet.The governing equations are simplified by similarity transformations.The reduced problem is then solved by the homotopy analysis method.The pertinent parameters appearing in the problem are discussed graphically and presented in tables.It is found that the shrinking solutions exist in the presence of MHD.It is also observed from the tables that the solutions for f（0） with different values of parameters are convergent.

Dual solutions in MHD stagnation-point flow of Prandtl fluid impinging on shrinking sheet

The present article investigates the dual nature of the solution of the magneto- hydrodynamic （MHD） stagnation-point flow of a Prandtl fluid model towards a shrinking surface. The self-similar nonlinear ordinary differential equations are solved numerically by the shooting： method. It is found that the dual solutions of the flow exist for cer- tain values of tile velocity ratio parameter. The special case of the first branch solutions （the classical Newtonian fluid model） is compared with the present numerical results of stretching flow. The results are found to be in good agreement. It is also shown that the boundary layer thickness for the second solution is thicker than that for the first solution.

Heat transfer in boundary layer stagnation-point flow towards a shrinking sheet with non-uniform heat flux

In this paper, the effect of non-uniform heat flux on heat transfer in boundary layer stagnation-point flow over a shrinking sheet is studied. The variable boundary heat fluxes are considered of two types： direct power-law variation with the distance along the sheet and inverse power-law variation with the distance. The governing partial differential equations （PDEs） are transformed into non linear self-similar ordinary differential equations （ODEs） by similarity transformations, and then those are solved using very efficient shooting method. The direct variation and inverse variation of heat flux along the sheet have completely different effects on the temperature distribution. Moreover, the heat transfer characteristics in the presence of non-uniform heat flux for several values of physical parameters are also found to be interesting.

Accurate solutions for viscoelastic boundary layer flow and heat transfer over stretching sheet

In this article, we present accurate analytical solutions for boundary layer flow and heat transfer of an incompressible and electrically conducting viscoelastic fluid over a linearly stretching surface subject to a transverse uniform magnetic field using the homotopy analysis method （HAM） for two general types of non-isothermal boundary conditions. In addition, we demonstrate that the previously reported analytical solutions for the temperature field given in terms of Kummer＇s function do not converge at the boundary. We provide a graphical and numerical demonstration of the convergence of the HAM solutions and tabulate the effects of various parameters on the skin friction coefficient and wall heat transfer.

Study on MHD Viscous Flow over a Stretching Sheet Using DTM-Pade’ Technique

In this paper, we present the study of momentum characteristics in a MHD viscous flow over a stretching sheet. First the partial differential equations of motion have been transformed to an ordinary differential equation. The analytical method called Differential Transformation Method (DTM) powered by the Pade’ approximation is applied to solve the nonlinear equation derived from MHD viscous flow over a stretching sheet, the effect of parameters variation has been investigated for two numerical cases and finally the analytical results have been compared with numerical one in a numerical case. The obtained results approve its efficiencies and capabilities beside numerical solutions achieved from Runge Kutta method.

Dual solutions in boundary layer flow of Maxwell fluid over a porous shrinking sheet

An analysis is carried out for dual solutions of the boundary layer flow of Maxwell fluid over a permeable shrinking sheet. In the investigation, a constant wall mass transfer is considered. With the help of similarity transformations, the governing partial differential equations（PDEs） are converted into a nonlinear self-similar ordinary differential equation（ODE）. For the numerical solution of transformed self-similar ODE, the shooting method is applied. The study reveals that the steady flow of Maxwell fluid is possible with a smaller amount of imposed mass suction compared with the viscous fluid flow. Dual solutions for the velocity distribution are obtained. Also, the increase of Deborah number reduces the boundary layer thickness for both solutions.

Three-dimensional magnetohydrodynamics axisymmetric stagnation flow and heat transfer due to an axisymmetric shrinking/stretching sheet with viscous dissipation and heat source/sink

The present work is concerned with the effects of viscous dissipation and heat source/sink on a three-dimensional magnetohydrodynamic boundary layer axisymmetric stagnation flow, and the heat transfer of an electrically conducting fluid over a sheet, which shrinks or stretches axisymmetrically in its own plane where the line of the symmetry of the stagnation flow and that of the shrinking （stretching） sheet are, in general, not aligned. The governing equations are transformed into ordinary differential equations by using suitable similarity transformations and then solved numerically by a shooting technique. This investigation explores the conditions of the non-existence, existence and uniqueness of the solutions of the similar equations numerically. It is noted that the range of the velocity ratio parameter, where the similarity solution exists, is increased with the increase of the value of the magnetic parameter. Furthermore, the study reveals that the non-alignment function affects the shrinking sheet more than the stretching sheet. In addition, the numerical results of the velocity profile, temperature profile, skin-friction coefficient, and rate of heat transfer at the sheet are discussed in detail with different parameters.

Three-dimensional MHD flow over a shrinking sheet: Analytical solution and stability analysis

The magnetohydrodynamic（MHD） steady and unsteady axisymmetric flows of a viscous fluid over a two-dimensional shrinking sheet are addressed. The mathematical analysis is carried out in the presence of a large magnetic field. The steady state problem results in a singular perturbation problem having an infinite domain singularity. The secular term appearing in the solution is removed and a two-term uniformly valid solution is derived using the Lindstedt–Poincaré technique. This asymptotic solution is validated by comparing it with the numerical solution. The solution for the unsteady problem is also presented analytically in the asymptotic limit of large magnetic field. The results of velocity profile and skin friction are shown graphically to explore the physical features of the flow field. The stability analysis of the unsteady flow is made to validate the asymptotic solution.

Viscous Slip MHD Flow over a Moving Sheet with an Arbitrary Surface Velocity

The magnetohydrodynamic（MHD） flow induced by a stretching or shrinking sheet under slip conditions is studied.Analytical solutions based on the boundary layer assumption are obtained in a closed form and can be applied to a flow configuration with any arbitrary velocity distributions. Seven typical sheet velocity profiles are employed as illustrating examples. The solutions to the slip MHD flow are derived from the general solution and discussed in detail. Different from self-similar boundary layer flows, the flows studied in this work have solutions in explicit analytical forms. However, the current flows require special mass transfer at the wall, which is determined by the moving velocity of the sheet. The effects of the slip parameter, the mass transfer at the wall, and the magnetic field on the flow are also demonstrated.

MHD Slip Flow past a Shrinking Sheet

An analysis is made for the steady two-dimensional laminar boundary layer flow of a viscous, incompressible, electrically conducting fluid near a stagnation point past a shrinking sheet with slip in the presence of a magnetic field. The governing boundary layer equations are transformed to ordinary differential equations by taking suitable similarity variables and solved numerically by Shooting method. The effects of the various parameters such as velocity ratio parameter, slip parameter, Prandtl number, Eckert number and magnetic parameter for velocity and temperature distributions have been discussed in detail through graphical representation.

Flow and heat transfer over hyperbolic stretching sheets

The boundary layer flow and heat transfer analysis of an incompressible viscous fluid for a hyperbolically stretching sheet is presented. The analytical and numer- ical results are obtained by a series expansion method and a local non-similarity （LNS） method, respectively. The analytical and numerical results for the skin friction and the Nusselt number are calculated and compared with each other. The significant observation is that the momentum and the thermal boundary layer thickness decrease as the distance from the leading edge increases. The well-known solution of linear stretching is found as the leading order solution for the hyperbolic stretching.

Flow and heat transfer of a nanofluid over a hyperbolically stretching sheet

This article explores the boundary layer flow and heat transfer of a viscous nanofluid bounded by a hyperbolically stretching sheet. Effects of Brownian and thermophoretic diffusions on heat transfer and concentration of nanoparticles are given due attention. The resulting nonlinear problems are computed for analytic and numerical solutions. The effects of Brownian motion and thermophoretic property are found to increase the temperature of the medium and reduce the heat transfer rate. The thermophoretic property thus enriches the concentration while the Brownian motion reduces the concentration of the nanoparticles in the fluid. Opposite effects of these properties are observed on the Sherwood number.

Feature of flow stress of aluminum sheet used for can during hot compression

The flow stress feature of aluminum sheet used for pressure can during plastic deformation at elevated temperature was studied by isothermal compression test using Gleeble 1 500 dynamic materials testing machine. The experimental results show that the steady state deformation is remarkable when the material is deformed in the temperature range of 350～500 ℃ at strain rates within the range of 10 -2 ～10.0 s -1 . The material is sensitive to positive strain rate. A hyperbolic sine relationship is found to correlate well the flow stress with the strain rate, and an Arrhenius relationship with the temperature. Semi empirical constitutive equations of the flow stress are derived from all experimental data for tested material during plastic deformation at elevated temperature by polyelement linear regression analysis. [

DTM-BF method and dual solutions for unsteady MHD flow over permeable shrinking sheet with velocity slip

An unsteady magnetohydrodynamic （MHD） boundary layer flow over a shrinking permeable sheet embedded in a moving viscous electrically conducting fluid is investigated both analytically and numerically. The velocity slip at the solid surface is taken into account in the boundary conditions. A novel analytical method named DTM- BF is proposed and used to get the approximate analytical solutions to the nonlinear governing equation along with the boundary conditions at infinity. All analytical results are compared with those obtained by a numerical method. The comparison shows good agreement, which validates the accuracy of the DTM-BF method. Moreover, the existence ranges of the dual solutions and the unique solution for various parameters are obtained. The effects of the velocity slip parameter, the unsteadiness parameter, the magnetic parameter, the suction/injection parameter, and the velocity ratio parameter on the skin friction, the unique velocity, and the dual velocity profiles are explored, respectively.

Symmetry Analysis for MHD Viscous Flow and Heat Transfer over a Stretching Sheet

This work deals with the boundary layer flow and heat transfer of an electrically conducting viscous fluid over a stretching sheet. Lie-group method is applied for determining the symmetry reductions for the governing equations by reducing the number of independent variables in the given system of partial differential equations by one, leading to a system of non-linear ordinary differential equation. The resulting system is then solved numerically using shooting method coupled with Runge-Kutta scheme. Effects of various values of physical parameters on the horizontal and vertical velocities, temperature profiles, wall heat transfer and the wall shear stress (skin friction), have been studied and the results are plotted. Furthermore, a comparison between the present results with existing numerical and homotopy methods has been reported and we found that they are in a good agreement.

Series solutions for the stagnation flow of a second-grade fluid over a shrinking sheet

This study derives the analytic solutions of boundary layer flows bounded by a shrinking sheet. With the similarity transformations, the partial differential equations are reduced into the ordinary differential equations which are then solved by the homotopy analysis method （HAM）. Two-dimensional and axisymmetric shrinking flow cases are discussed.

Unsteady Boundary Layer Flow and Heat Transfer Due to a Stretching Sheet by Quasilinearization Technique

In this paper, the problem of unsteady laminar boundary-layer flow and heat transfer of a viscous income-pressible fluid over stretching sheet is studied numerically. The unsteadiness in the flow and temperature is caused by the time-dependent stretching velocity and surface temperature. A similarity transformation is used to reduce the governing boundary-layer equations to couple higher order non-linear ordinary differential equations. These equations are numerically solved using quasi-linearization technique. The effect of the governing parameters unsteadiness parameter and Prandtl number on velocity and temperature profile is discussed. Besides the numerical results for the local skin friction coefficient and local Nusselt number are presented. The computed results are compared with previously reported work.