In order to ascertain the effects of atmospheric pressure on developmental characteristics and the stability of AEA(air-entraining agent)solution bubbles,AEA solution experiments and AEA solution bubble experiments we...In order to ascertain the effects of atmospheric pressure on developmental characteristics and the stability of AEA(air-entraining agent)solution bubbles,AEA solution experiments and AEA solution bubble experiments were,respectively,conducted in Peking(50 m,101.2 kPa)and Lhasa(3,650 m,63.1 kPa).Surface tensions and inflection-point concentrations were tested based on AEA solutions,whilst developmental characteristics,thicknesses and elastic coefficients of liquid films were tested based on air bubbles of AEA solutions.The study involved three types of AEAs,which were TM-O,226A,and 226S.The experimental results show that initial sizes of TM-O,226A,and 226S are,respectively,increased by 43.5%,17.5%,and 3.8%.With the decrease of ambient pressure,the drainage rate and the drainage index of AEA solution bubbles increase.Interference experiments show that the liquid film thicknesses of all tested AEA solution bubbles are in micron scales.When the atmospheric pressure decreases from 101.2 to 63.1 kPa,the liquid film thicknesses of three types of AEA solutions decrease in various degrees;and film elasticities at critical thicknesses increase.Liquid film of 226S solution bubbles is the most stable,presenting as a minimum thickness variation.It should be noted that elastic coefficient of liquid film only represents the level at critical thickness,thus it can not be applied as the only evaluating indicator of bubble stability.For a type of AEA,factors affecting the stability of its bubbles under low atmospheric pressure include initial bubbles size,liquid film thickness,liquid film elasticity,ambient temperature,etc.展开更多
By using the experimental approach of dropping liquid, the coupling of three anionic wetting agents with ten dust samples of sulfide ores was studied, and particularly the wetting effects of the wetting agents on the ...By using the experimental approach of dropping liquid, the coupling of three anionic wetting agents with ten dust samples of sulfide ores was studied, and particularly the wetting effects of the wetting agents on the sulfide dust influenced by factors of agent concentration and sulfate additive in the wetting agent solutions were investigated. The results show that when the solution temperature is about 20 ℃, all the selected wetting agents are effective to most dust samples, but the effect is different. Wetting agents are more effective to the dust which is difficult to be wetted. Wetting agent solution with sodium sulfate can improve the wetting ability of sulfide dust. For sodium dodecyl benzene sulfonate, the suitable concentration of sodium sulfate is 12 mmol/L. The cost of wetting agents can be reduced because the sodium sulfate is much cheaper than many surfactants. Since the dust of sulfide ores is composed of various minerals and elements, the whole effect of depressing dust should be considered while innovating a wetting agent.展开更多
The Vilsmeier reagent is well-known electrophilic reagent for synthetically useful organic transformations. Its ionic liquid version has been prepared from DMF-like ionic liquid. Apart from its other reported applicat...The Vilsmeier reagent is well-known electrophilic reagent for synthetically useful organic transformations. Its ionic liquid version has been prepared from DMF-like ionic liquid. Apart from its other reported applications, presently it has been used as an efficient organo reagent for efficient esterification. Variety of esters has been prepared from versatile carboxylic acids and alcohols under ionic liquid conditions with excellent yields. The present system offers an economically and environmentally better alternative to routine procedures.展开更多
In order to improve the electrical conductivity of nylon 6(PA6)and avoid misfires and explosions caused by static charge accumulation,a quaternary ammonium salt polyionic liquid(PIL)antistatic agent was synthesized in...In order to improve the electrical conductivity of nylon 6(PA6)and avoid misfires and explosions caused by static charge accumulation,a quaternary ammonium salt polyionic liquid(PIL)antistatic agent was synthesized in this paper.The surface resistance of PA6 was reduced to 10~8Ωwith the addition of 2 wt%antistatic agent,and the mechanical properties and aging resistance of the substrate were improved.Meanwhile,the morphology and crystallinity of PIL/PA6 composites were further characterized by scanning electron microscope(SEM),energy dispersion spectrometer(EDS)and X-ray diffraction(XRD).It is worth noting that the quaternary ammonium salt polyionic liquid antistatic agent synthesized in this paper has the advantages of excellent antistatic effect,durability,low cost,and simple reaction condition,so it has a broad application prospect in the antistatic aspect of PA6.展开更多
基金Funded by the National Natural Science Foundation of China(Nos.52178428,52178427,and 52308454)the Science and Technology Project of Tibet Department of Transportation(No.XZJTKJ[2020]04)。
文摘In order to ascertain the effects of atmospheric pressure on developmental characteristics and the stability of AEA(air-entraining agent)solution bubbles,AEA solution experiments and AEA solution bubble experiments were,respectively,conducted in Peking(50 m,101.2 kPa)and Lhasa(3,650 m,63.1 kPa).Surface tensions and inflection-point concentrations were tested based on AEA solutions,whilst developmental characteristics,thicknesses and elastic coefficients of liquid films were tested based on air bubbles of AEA solutions.The study involved three types of AEAs,which were TM-O,226A,and 226S.The experimental results show that initial sizes of TM-O,226A,and 226S are,respectively,increased by 43.5%,17.5%,and 3.8%.With the decrease of ambient pressure,the drainage rate and the drainage index of AEA solution bubbles increase.Interference experiments show that the liquid film thicknesses of all tested AEA solution bubbles are in micron scales.When the atmospheric pressure decreases from 101.2 to 63.1 kPa,the liquid film thicknesses of three types of AEA solutions decrease in various degrees;and film elasticities at critical thicknesses increase.Liquid film of 226S solution bubbles is the most stable,presenting as a minimum thickness variation.It should be noted that elastic coefficient of liquid film only represents the level at critical thickness,thus it can not be applied as the only evaluating indicator of bubble stability.For a type of AEA,factors affecting the stability of its bubbles under low atmospheric pressure include initial bubbles size,liquid film thickness,liquid film elasticity,ambient temperature,etc.
文摘By using the experimental approach of dropping liquid, the coupling of three anionic wetting agents with ten dust samples of sulfide ores was studied, and particularly the wetting effects of the wetting agents on the sulfide dust influenced by factors of agent concentration and sulfate additive in the wetting agent solutions were investigated. The results show that when the solution temperature is about 20 ℃, all the selected wetting agents are effective to most dust samples, but the effect is different. Wetting agents are more effective to the dust which is difficult to be wetted. Wetting agent solution with sodium sulfate can improve the wetting ability of sulfide dust. For sodium dodecyl benzene sulfonate, the suitable concentration of sodium sulfate is 12 mmol/L. The cost of wetting agents can be reduced because the sodium sulfate is much cheaper than many surfactants. Since the dust of sulfide ores is composed of various minerals and elements, the whole effect of depressing dust should be considered while innovating a wetting agent.
文摘The Vilsmeier reagent is well-known electrophilic reagent for synthetically useful organic transformations. Its ionic liquid version has been prepared from DMF-like ionic liquid. Apart from its other reported applications, presently it has been used as an efficient organo reagent for efficient esterification. Variety of esters has been prepared from versatile carboxylic acids and alcohols under ionic liquid conditions with excellent yields. The present system offers an economically and environmentally better alternative to routine procedures.
基金supported by the Natural Science Foundation of Guangdong Province(Project No.2021A1515010140)the Natural Science Foundation of Shandong Province(Project No.ZR2020ME065)
文摘In order to improve the electrical conductivity of nylon 6(PA6)and avoid misfires and explosions caused by static charge accumulation,a quaternary ammonium salt polyionic liquid(PIL)antistatic agent was synthesized in this paper.The surface resistance of PA6 was reduced to 10~8Ωwith the addition of 2 wt%antistatic agent,and the mechanical properties and aging resistance of the substrate were improved.Meanwhile,the morphology and crystallinity of PIL/PA6 composites were further characterized by scanning electron microscope(SEM),energy dispersion spectrometer(EDS)and X-ray diffraction(XRD).It is worth noting that the quaternary ammonium salt polyionic liquid antistatic agent synthesized in this paper has the advantages of excellent antistatic effect,durability,low cost,and simple reaction condition,so it has a broad application prospect in the antistatic aspect of PA6.
