Focusing on the low open circuit voltage(V_(OC))and fill factor(FF)in flexible Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)solar cells,indium(In)ions are introduced into the CZTSSe absorbers near Mo foils to modify the back interface...Focusing on the low open circuit voltage(V_(OC))and fill factor(FF)in flexible Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)solar cells,indium(In)ions are introduced into the CZTSSe absorbers near Mo foils to modify the back interface and passivate deep level defects in CZTSSe bulk concurrently for improving the performance of flexible device.The results show that In doping effectively inhibits the formation of secondary phase(Cu(S,Se)_(2))and VSndefects.Further studies demonstrate that the barrier height at the back interface is decreased and the deep level defects(Cu_(Sn)defects)in CZTSSe bulk are passivated.Moreover,the carrier concentration is increased and the V_(OC) deficit(V_(OC,def))is decreased significantly due to In doping.Finally,the flexible CZTSSe solar cell with 10.01%power conversion efficiency(PCE)has been obtained.The synergistic strategy of interface modification and bulk defects passivation through In incorporation provides a new thought for the fabrication of efficient flexible kesterite-based solar cells.展开更多
For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surf...For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surface defect detection,a lightweight detection method based on an improved YOLOv5s method is proposed to replace the traditional manual detection methods.In this method,the MobileNetV3 module replaces the backbone network of YOLOv5s,depth-separable convolution is introduced,the parameters and calculations are reduced,and CIoU_Loss is used as the loss function of the boundary box regression to improve its detection accuracy.A dataset of electronic pump shell defects is established,and the performance of the improved method is evaluated by comparing it with that of the original method.The results show that the parameters and FLOPs are reduced by 49.83%and 61.59%,respectively,compared with the original YOLOv5s model,and the detection accuracy is improved by 1.74%,which is an indication of the superiority of the improved method.To further verify the universality of the improved method,it is compared with the results using the original method on the PASCALVOC2007 dataset,which verifies that it yields better performance.In summary,the improved lightweight method can be used for the real-time detection of electronic water pump shell defects.展开更多
This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experi...This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experiments were used to determine the optimal combination of parameters.In particular,an erosion device con-sisting of a motor with a constantflow rate of 45 L/min,a pump with a diameter of 40 mm,a nozzle with a dia-meter of 5 mm,and a tank made of“perspex glass”55 cm long,30 cm tall,and 25 cm wide was used.The tests were conducted by varying the sample-to-nozzle distance,the pattern angle,and the sand particle size.The results have revealed that the presence of 7.5%by weight of waste coconut shell,for conditions corresponding to 90°angle,sand size 425μm,stand distance 30 cm,gives the best wear resistance(3.04×10^(-5) g/g).Thefiller content and sand particle size affect the erosive rate,with the angle playing a secondary role.The distance between the sample and the nozzle has a weaker effect on erosive wear.The hardness results show that the models(UP-5%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste coconut shell)give the best values for prayer compared to the samples(UP-5 wt.%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste walnut shell).展开更多
The defect chemistry is successfully modulated on free-standing and binder-free carbon cathodes for highly efficient Li-S redox reactions.Such rationally regulated defect engineering realizes the synchronization of io...The defect chemistry is successfully modulated on free-standing and binder-free carbon cathodes for highly efficient Li-S redox reactions.Such rationally regulated defect engineering realizes the synchronization of ion/electron-conductive and defect-rich networks on the threedimension carbon cathode,leading to its tunable activity for both relieving the shuttle phenomenon and accelerating the sulfur redox reaction kinetics.As expected,the defective carbon cathode harvests a high rate capacity of 1217.8 mAh g^(-1)at 0.2 C and a superior capacity retention of61.7%at 2 C after 500 cycles.Even under the sulfur mass loading of 11.1 mg cm^(-2),the defective cathode still holds a remarkable areal capacity of 8.5 mAh cm^(-2).展开更多
Two cylindrical vessels under internal pressure are used for this work in order to study the influence of the position and size of defects on their elastic and elastoplastic behavior. One contains two external longitu...Two cylindrical vessels under internal pressure are used for this work in order to study the influence of the position and size of defects on their elastic and elastoplastic behavior. One contains two external longitudinal semi-elliptic defects of different dimensions realized diametrically opposed. The other contains the same defects but is circumferential. These defects are carried out by elect-erosion. Strain gauges are placed in the neighborhood of the defects of which the purpose is to obtain the strain distribution. This work also allows the comparison between two defects of different dimensions, which are of the same shape or different shapes. These defects are longitudinal and circumferential semi-elliptical. The position of these defects relative to the inner radius of a cylindrical pressure vessel is considered. The deformations results are discussed.展开更多
The singularity at distance r → 0 at the center of a spherically symmetric non-rotating, uncharged mass of radius R, is considered here. Under inverse square law force, the Schwarzschild metric, needs to be modified,...The singularity at distance r → 0 at the center of a spherically symmetric non-rotating, uncharged mass of radius R, is considered here. Under inverse square law force, the Schwarzschild metric, needs to be modified, to include Newton’s Shell Theorem (NST). By including NST for r, both Schwarzschild singularity at r = 2GM/c2 and at r → 0 singularities are removed from the metric. Near R → 0, the question of maximal density is considered based on Schwarzschild’s modified metric, and compared to the quantum limit of maximal mass density put by Planck’s quantum-based universal units. It is asserted, that General relativity, when combined with Planck’s universal units, inevitably leads to quantization of gravity.展开更多
It is difficult to establish structure-property relationships in a defective solid because of its inhomogeneous-geometry microstructure caused by defects. In the present research, the effects of pores and cracks on th...It is difficult to establish structure-property relationships in a defective solid because of its inhomogeneous-geometry microstructure caused by defects. In the present research, the effects of pores and cracks on the Young’s modulus of a defective solid are studied. Based on the law of the conservation of energy, mathematical formulations are proposed to indicate how the shape, size, and distribution of defects affect the effective Young’s modulus. In this approach, detailed equations are illustrated to represent the shape and size of defects on the effective Young’s modulus. Different from the results obtained from the traditional empirical analyses, mixture law or statistical method, for the first time, our results from the finite element method (FEM) and strict analytical calculation show that the influence of pore radius and crack length on the effective Young’s modulus can be quantified. It is found that the longest crack in a typical microstructure of ceramic coating dominates the contribution of the effective Young’s modulus in the vertical direction of the crack.展开更多
A 66-year-old woman with lower limb edema and exertional dyspnea presented to the emergency department.Posteroanterior chest X-ray revealed a Fleischner’s sign in both lungs(Figure 1A)suggesting a pulmonary hypertens...A 66-year-old woman with lower limb edema and exertional dyspnea presented to the emergency department.Posteroanterior chest X-ray revealed a Fleischner’s sign in both lungs(Figure 1A)suggesting a pulmonary hypertension.A subsequent transthoracic echocardiogram revealed a 24 mm diameter secundum atrial septal defect(ASD)(Figure 1B)with a dilated right heart and a mean pulmonary pressure of 68 mmHg.Fleischner’s sign refers to a prominent central pulmonary artery that can be commonly caused either by pulmonary hypertension or acute pulmonary embolism.This radiological finding is very rare in patients with secundum ASD unless the defect remains undiagnosed till the elderly.Chest X-ray remains fundamental in making diagnosis of cardiovascular disease.展开更多
It is well known that for technological application,a great effort has been done to enchance Jvalue ofsuperconducting YBaCuO sintered bulk.Except oxygen content,the main problem for increasing critical cur-rent densit...It is well known that for technological application,a great effort has been done to enchance Jvalue ofsuperconducting YBaCuO sintered bulk.Except oxygen content,the main problem for increasing critical cur-rent density Jis to eliminate the weak link and to control crystallographic anisotropy.It is necessary tomake YBaCuO superconducting bulk have a strong texture with C-axis orientation.Since Jin et al.has suc-展开更多
Compared to the dubbing, the version of subtitling has many defects, including the faults purely in language translation and the inaccuracy in the cultural images. As a media of cultural communication, the translator ...Compared to the dubbing, the version of subtitling has many defects, including the faults purely in language translation and the inaccuracy in the cultural images. As a media of cultural communication, the translator of the subtitling has to pay enough attention to the art of language, and has to take strategies centering on the audience, promoting the cultural communication and reducing the cultural differences.展开更多
Prisoner’s Dilemma is a master trope for relaying the permanent impasse or dilemma of cooperation versus defection.In Prisoner’s Dilemma Richard Powers narrates a multiform of dilemma mainly narrating Eddie Hobson’...Prisoner’s Dilemma is a master trope for relaying the permanent impasse or dilemma of cooperation versus defection.In Prisoner’s Dilemma Richard Powers narrates a multiform of dilemma mainly narrating Eddie Hobson’s traumatic history,along with Eddie’s attempt to carry out a strategy—Eddie’s ideal Hobstown which is supposed to cope with the confused dilemma.Pow⁃ers’strategic moral insights are revealed by assuming that each player feels sympathy for the other and a moral cooperative instead of antagonistic solution to the Prisoner’s Dilemma will be found.展开更多
It is significant for the rational construction of the high–efficient bifunctional electrocatalysts for in–depth understandings of how to improve the electron transfer and ion/oxygen transport in catalyzing oxygen r...It is significant for the rational construction of the high–efficient bifunctional electrocatalysts for in–depth understandings of how to improve the electron transfer and ion/oxygen transport in catalyzing oxygen reduction reaction and oxygen evolution reaction(ORR and OER),but still full of vital challenges.Herein,we synthesize the novel“three–in–one”catalyst that engineers core–shell Mott–Schottky Co_(9)S_(8)/Co heterostructure on the defective reduced graphene oxide(Co_(9)S_(8)/Co–rGO).The Co_(9)S_(8)/Co–rGO catalyst exhibits abundant Mott–Schottky heterogeneous–interfaces,the well–defined core–shell nanostructure as well as the defective carbon architecture,which provide the multiple guarantees for enhancing the electron transfer and ion/oxygen transport,thus boosting the catalytic ORR and OER activities in neutral electrolyte.As expected,the integrated core–shell Mott–Schottky Co_(9)S_(8)/Co–rGO catalyst delivers the most robust and efficient rechargeable ZABs performance in neutral solution electrolytes accompanied with a power density of 59.5 mW cm^(-2) and superior cycling stability at 5 mA cm^(-2) over 200 h.This work not only emphasizes the rational designing of the high–efficient bifunctional oxygen catalysts from the fundamental understanding of accelerating the electron transfer and ion/oxygen transport,but also sheds light on the practical application prospects in more friendly environmentally neutral rechargeable ZABs.展开更多
The vibration characteristics of a functionally graded material circular cylindrical shell filled with fluid are examined with a wave propagation approach. The shell is filled with an incompressible non-viscous fluid....The vibration characteristics of a functionally graded material circular cylindrical shell filled with fluid are examined with a wave propagation approach. The shell is filled with an incompressible non-viscous fluid. Axial modal dependence is approximated by exponential functions. A theoretical study of shell vibration frequencies is analyzed for simply supported-simply supported, clamped-simply supported, and clamped-clamped boundary conditions with the fluid effect. The validity and the accuracy of the present method are confirmed by comparing the present results with those available in the literature. Good agreement is observed between the two sets of results.展开更多
The environmentally friendly Cu_(2)ZnSn(S,Se)_(4)(CZTSSe) compounds are promising direct bandgap materials for application in thin film solar cells, but the spontaneous surface defects disordering would lead to large ...The environmentally friendly Cu_(2)ZnSn(S,Se)_(4)(CZTSSe) compounds are promising direct bandgap materials for application in thin film solar cells, but the spontaneous surface defects disordering would lead to large open-circuit voltage deficit(V_(oc,deficit)) and significantly limit kesterite photovoltaics performance,primarily arising from the generated more recombination centers and insufficient p to n conversion at p-n junction. Herein, we establish a surface defects ordering structure in CZTSSe system via local substitution of Cu by Ag to suppress disordered Cu_(Zn) defects and generate benign n-type Zn_(Ag) donors. Taking advantage of the decreased annealing temperature of Ag F post deposition treatment(PDT), the high concentration of Ag incorporated into surface absorber facilitates the formation of surface ordered defect environment similar to that of efficient CIGS PV. The manipulation of highly doped surface structure could effectively reduce recombination centers, increase depletion region width and enlarge the band bending near p-n junction. As a result, the Ag F-PDT device finally achieves maximum efficiency of 12.34% with enhanced V_(oc) of 0.496 V. These results offer a new solution route in surface defects and energy-level engineering, and open the way to build up high quality p-n junction for future development of kesterite technology.展开更多
基金supported by the National Natural Science Foundation of China(62074037)the Science and Technology Department of Fujian Province(2020I0006)the Fujian Science&Technology Innovation Laboratory for Optoelectronic Information of China(2021ZZ124)。
文摘Focusing on the low open circuit voltage(V_(OC))and fill factor(FF)in flexible Cu_(2)ZnSn(S,Se)_(4)(CZTSSe)solar cells,indium(In)ions are introduced into the CZTSSe absorbers near Mo foils to modify the back interface and passivate deep level defects in CZTSSe bulk concurrently for improving the performance of flexible device.The results show that In doping effectively inhibits the formation of secondary phase(Cu(S,Se)_(2))and VSndefects.Further studies demonstrate that the barrier height at the back interface is decreased and the deep level defects(Cu_(Sn)defects)in CZTSSe bulk are passivated.Moreover,the carrier concentration is increased and the V_(OC) deficit(V_(OC,def))is decreased significantly due to In doping.Finally,the flexible CZTSSe solar cell with 10.01%power conversion efficiency(PCE)has been obtained.The synergistic strategy of interface modification and bulk defects passivation through In incorporation provides a new thought for the fabrication of efficient flexible kesterite-based solar cells.
基金This work is supported by the Qing Lan Project of the Higher Education Institutions of Jiangsu Province,the 2022 Jiangsu Science and Technology Plan Special Fund(International Science and Technology Cooperation)(BZ2022029).
文摘For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surface defect detection,a lightweight detection method based on an improved YOLOv5s method is proposed to replace the traditional manual detection methods.In this method,the MobileNetV3 module replaces the backbone network of YOLOv5s,depth-separable convolution is introduced,the parameters and calculations are reduced,and CIoU_Loss is used as the loss function of the boundary box regression to improve its detection accuracy.A dataset of electronic pump shell defects is established,and the performance of the improved method is evaluated by comparing it with that of the original method.The results show that the parameters and FLOPs are reduced by 49.83%and 61.59%,respectively,compared with the original YOLOv5s model,and the detection accuracy is improved by 1.74%,which is an indication of the superiority of the improved method.To further verify the universality of the improved method,it is compared with the results using the original method on the PASCALVOC2007 dataset,which verifies that it yields better performance.In summary,the improved lightweight method can be used for the real-time detection of electronic water pump shell defects.
文摘This study aims to evaluate the erosion behavior and the hardness of hybrid composites made of varying amounts of coconut shells,walnut shells,and carbonfibers dispersed in a polyester matrix.MINITAB(L16)Taguchi experiments were used to determine the optimal combination of parameters.In particular,an erosion device con-sisting of a motor with a constantflow rate of 45 L/min,a pump with a diameter of 40 mm,a nozzle with a dia-meter of 5 mm,and a tank made of“perspex glass”55 cm long,30 cm tall,and 25 cm wide was used.The tests were conducted by varying the sample-to-nozzle distance,the pattern angle,and the sand particle size.The results have revealed that the presence of 7.5%by weight of waste coconut shell,for conditions corresponding to 90°angle,sand size 425μm,stand distance 30 cm,gives the best wear resistance(3.04×10^(-5) g/g).Thefiller content and sand particle size affect the erosive rate,with the angle playing a secondary role.The distance between the sample and the nozzle has a weaker effect on erosive wear.The hardness results show that the models(UP-5%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste coconut shell)give the best values for prayer compared to the samples(UP-5 wt.%carbonfiber-2.5-3.5-4.5-5.5-6.5-7.5 wt.%waste walnut shell).
基金supported by the National Natural Science Foundation of China(52172239)Project of State Key Laboratory of Environment-Friendly Energy Materials+2 种基金Southwest University of Science and Technology(Grant Nos.21fksy24 and 18ZD320304)Chongqing Talents:Exceptional Young Talents Project(Grant No.CQYC201905041)Natural Science Foundation of Chongqing China(Grant No.cstc2021jcyj-jqX0031)。
文摘The defect chemistry is successfully modulated on free-standing and binder-free carbon cathodes for highly efficient Li-S redox reactions.Such rationally regulated defect engineering realizes the synchronization of ion/electron-conductive and defect-rich networks on the threedimension carbon cathode,leading to its tunable activity for both relieving the shuttle phenomenon and accelerating the sulfur redox reaction kinetics.As expected,the defective carbon cathode harvests a high rate capacity of 1217.8 mAh g^(-1)at 0.2 C and a superior capacity retention of61.7%at 2 C after 500 cycles.Even under the sulfur mass loading of 11.1 mg cm^(-2),the defective cathode still holds a remarkable areal capacity of 8.5 mAh cm^(-2).
文摘Two cylindrical vessels under internal pressure are used for this work in order to study the influence of the position and size of defects on their elastic and elastoplastic behavior. One contains two external longitudinal semi-elliptic defects of different dimensions realized diametrically opposed. The other contains the same defects but is circumferential. These defects are carried out by elect-erosion. Strain gauges are placed in the neighborhood of the defects of which the purpose is to obtain the strain distribution. This work also allows the comparison between two defects of different dimensions, which are of the same shape or different shapes. These defects are longitudinal and circumferential semi-elliptical. The position of these defects relative to the inner radius of a cylindrical pressure vessel is considered. The deformations results are discussed.
文摘The singularity at distance r → 0 at the center of a spherically symmetric non-rotating, uncharged mass of radius R, is considered here. Under inverse square law force, the Schwarzschild metric, needs to be modified, to include Newton’s Shell Theorem (NST). By including NST for r, both Schwarzschild singularity at r = 2GM/c2 and at r → 0 singularities are removed from the metric. Near R → 0, the question of maximal density is considered based on Schwarzschild’s modified metric, and compared to the quantum limit of maximal mass density put by Planck’s quantum-based universal units. It is asserted, that General relativity, when combined with Planck’s universal units, inevitably leads to quantization of gravity.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50801005)
文摘It is difficult to establish structure-property relationships in a defective solid because of its inhomogeneous-geometry microstructure caused by defects. In the present research, the effects of pores and cracks on the Young’s modulus of a defective solid are studied. Based on the law of the conservation of energy, mathematical formulations are proposed to indicate how the shape, size, and distribution of defects affect the effective Young’s modulus. In this approach, detailed equations are illustrated to represent the shape and size of defects on the effective Young’s modulus. Different from the results obtained from the traditional empirical analyses, mixture law or statistical method, for the first time, our results from the finite element method (FEM) and strict analytical calculation show that the influence of pore radius and crack length on the effective Young’s modulus can be quantified. It is found that the longest crack in a typical microstructure of ceramic coating dominates the contribution of the effective Young’s modulus in the vertical direction of the crack.
文摘A 66-year-old woman with lower limb edema and exertional dyspnea presented to the emergency department.Posteroanterior chest X-ray revealed a Fleischner’s sign in both lungs(Figure 1A)suggesting a pulmonary hypertension.A subsequent transthoracic echocardiogram revealed a 24 mm diameter secundum atrial septal defect(ASD)(Figure 1B)with a dilated right heart and a mean pulmonary pressure of 68 mmHg.Fleischner’s sign refers to a prominent central pulmonary artery that can be commonly caused either by pulmonary hypertension or acute pulmonary embolism.This radiological finding is very rare in patients with secundum ASD unless the defect remains undiagnosed till the elderly.Chest X-ray remains fundamental in making diagnosis of cardiovascular disease.
文摘It is well known that for technological application,a great effort has been done to enchance Jvalue ofsuperconducting YBaCuO sintered bulk.Except oxygen content,the main problem for increasing critical cur-rent density Jis to eliminate the weak link and to control crystallographic anisotropy.It is necessary tomake YBaCuO superconducting bulk have a strong texture with C-axis orientation.Since Jin et al.has suc-
文摘Compared to the dubbing, the version of subtitling has many defects, including the faults purely in language translation and the inaccuracy in the cultural images. As a media of cultural communication, the translator of the subtitling has to pay enough attention to the art of language, and has to take strategies centering on the audience, promoting the cultural communication and reducing the cultural differences.
文摘Prisoner’s Dilemma is a master trope for relaying the permanent impasse or dilemma of cooperation versus defection.In Prisoner’s Dilemma Richard Powers narrates a multiform of dilemma mainly narrating Eddie Hobson’s traumatic history,along with Eddie’s attempt to carry out a strategy—Eddie’s ideal Hobstown which is supposed to cope with the confused dilemma.Pow⁃ers’strategic moral insights are revealed by assuming that each player feels sympathy for the other and a moral cooperative instead of antagonistic solution to the Prisoner’s Dilemma will be found.
基金financially supported by the National Natural Science Foundation of China (21775142)the Sino–German Center for Research Promotion (Grants GZ 1351)+1 种基金the Natural Science Foundation of Shandong Province (ZR2020ZD10)the Research Funds for the Central Universities (202061031)。
文摘It is significant for the rational construction of the high–efficient bifunctional electrocatalysts for in–depth understandings of how to improve the electron transfer and ion/oxygen transport in catalyzing oxygen reduction reaction and oxygen evolution reaction(ORR and OER),but still full of vital challenges.Herein,we synthesize the novel“three–in–one”catalyst that engineers core–shell Mott–Schottky Co_(9)S_(8)/Co heterostructure on the defective reduced graphene oxide(Co_(9)S_(8)/Co–rGO).The Co_(9)S_(8)/Co–rGO catalyst exhibits abundant Mott–Schottky heterogeneous–interfaces,the well–defined core–shell nanostructure as well as the defective carbon architecture,which provide the multiple guarantees for enhancing the electron transfer and ion/oxygen transport,thus boosting the catalytic ORR and OER activities in neutral electrolyte.As expected,the integrated core–shell Mott–Schottky Co_(9)S_(8)/Co–rGO catalyst delivers the most robust and efficient rechargeable ZABs performance in neutral solution electrolytes accompanied with a power density of 59.5 mW cm^(-2) and superior cycling stability at 5 mA cm^(-2) over 200 h.This work not only emphasizes the rational designing of the high–efficient bifunctional oxygen catalysts from the fundamental understanding of accelerating the electron transfer and ion/oxygen transport,but also sheds light on the practical application prospects in more friendly environmentally neutral rechargeable ZABs.
文摘The vibration characteristics of a functionally graded material circular cylindrical shell filled with fluid are examined with a wave propagation approach. The shell is filled with an incompressible non-viscous fluid. Axial modal dependence is approximated by exponential functions. A theoretical study of shell vibration frequencies is analyzed for simply supported-simply supported, clamped-simply supported, and clamped-clamped boundary conditions with the fluid effect. The validity and the accuracy of the present method are confirmed by comparing the present results with those available in the literature. Good agreement is observed between the two sets of results.
基金supported by the National Natural Science Foundation of China(61874159,62074052,61974173,52072327,51702085 and 51802081)the Joint Talent Cultivation Funds of NSFC-HN(U1704151 and U1904192)+1 种基金the Zhongyuan Thousand Talents(Zhongyuan Scholars)Program of Henan Province(202101510004)the Science and Technology Innovation Talents in Universities of Henan Province(21HASTIT023)。
文摘The environmentally friendly Cu_(2)ZnSn(S,Se)_(4)(CZTSSe) compounds are promising direct bandgap materials for application in thin film solar cells, but the spontaneous surface defects disordering would lead to large open-circuit voltage deficit(V_(oc,deficit)) and significantly limit kesterite photovoltaics performance,primarily arising from the generated more recombination centers and insufficient p to n conversion at p-n junction. Herein, we establish a surface defects ordering structure in CZTSSe system via local substitution of Cu by Ag to suppress disordered Cu_(Zn) defects and generate benign n-type Zn_(Ag) donors. Taking advantage of the decreased annealing temperature of Ag F post deposition treatment(PDT), the high concentration of Ag incorporated into surface absorber facilitates the formation of surface ordered defect environment similar to that of efficient CIGS PV. The manipulation of highly doped surface structure could effectively reduce recombination centers, increase depletion region width and enlarge the band bending near p-n junction. As a result, the Ag F-PDT device finally achieves maximum efficiency of 12.34% with enhanced V_(oc) of 0.496 V. These results offer a new solution route in surface defects and energy-level engineering, and open the way to build up high quality p-n junction for future development of kesterite technology.