For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surf...For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surface defect detection,a lightweight detection method based on an improved YOLOv5s method is proposed to replace the traditional manual detection methods.In this method,the MobileNetV3 module replaces the backbone network of YOLOv5s,depth-separable convolution is introduced,the parameters and calculations are reduced,and CIoU_Loss is used as the loss function of the boundary box regression to improve its detection accuracy.A dataset of electronic pump shell defects is established,and the performance of the improved method is evaluated by comparing it with that of the original method.The results show that the parameters and FLOPs are reduced by 49.83%and 61.59%,respectively,compared with the original YOLOv5s model,and the detection accuracy is improved by 1.74%,which is an indication of the superiority of the improved method.To further verify the universality of the improved method,it is compared with the results using the original method on the PASCALVOC2007 dataset,which verifies that it yields better performance.In summary,the improved lightweight method can be used for the real-time detection of electronic water pump shell defects.展开更多
Here, we propose a chemical heat pump chiller with a SrBr<sub>2</sub> hydration reaction system for utilization of waste heat. The SrBr<sub>2</sub> hydration reaction could recover waste heat i...Here, we propose a chemical heat pump chiller with a SrBr<sub>2</sub> hydration reaction system for utilization of waste heat. The SrBr<sub>2</sub> hydration reaction could recover waste heat in low temperatures ranging from 373 K to 353 K, and the system showed good potential in terms of the high cooling thermal-storage density. Previous studies have given little information on the reaction characteristics of the SrBr<sub>2</sub> hydration reaction. In this paper, we developed a measuring method for the hydration reaction equilibrium and reaction rate based on the volumetric method. We analyzed the hydration reaction rate with an unreacted-core shell model. In the experiments, the SrBr<sub>2</sub> equilibrium temperature observed was equal to the theoretical equilibrium temperature obtained from thermodynamic databases. In addition, the hysteresis gap between the hydration and dehydration values was 2.0 K. Thus, the hysteresis effect was negligible for the chemical heat pump cooling operation. The reaction fraction of the SrBr<sub>2</sub> hydration reached 0.7 within 20 s. By analyzing the hydration reaction rate with the unreacted-core shell model, the activation energy value was calculated to be56.6 kJ/mol. The calculation results showed good agreement with those of the experiment as the reaction fraction reached 0.7.展开更多
基金This work is supported by the Qing Lan Project of the Higher Education Institutions of Jiangsu Province,the 2022 Jiangsu Science and Technology Plan Special Fund(International Science and Technology Cooperation)(BZ2022029).
文摘For surface defects in electronic water pump shells,the manual detection efficiency is low,prone to misdetection and leak detection,and encounters problems,such as uncertainty.To improve the speed and accuracy of surface defect detection,a lightweight detection method based on an improved YOLOv5s method is proposed to replace the traditional manual detection methods.In this method,the MobileNetV3 module replaces the backbone network of YOLOv5s,depth-separable convolution is introduced,the parameters and calculations are reduced,and CIoU_Loss is used as the loss function of the boundary box regression to improve its detection accuracy.A dataset of electronic pump shell defects is established,and the performance of the improved method is evaluated by comparing it with that of the original method.The results show that the parameters and FLOPs are reduced by 49.83%and 61.59%,respectively,compared with the original YOLOv5s model,and the detection accuracy is improved by 1.74%,which is an indication of the superiority of the improved method.To further verify the universality of the improved method,it is compared with the results using the original method on the PASCALVOC2007 dataset,which verifies that it yields better performance.In summary,the improved lightweight method can be used for the real-time detection of electronic water pump shell defects.
文摘Here, we propose a chemical heat pump chiller with a SrBr<sub>2</sub> hydration reaction system for utilization of waste heat. The SrBr<sub>2</sub> hydration reaction could recover waste heat in low temperatures ranging from 373 K to 353 K, and the system showed good potential in terms of the high cooling thermal-storage density. Previous studies have given little information on the reaction characteristics of the SrBr<sub>2</sub> hydration reaction. In this paper, we developed a measuring method for the hydration reaction equilibrium and reaction rate based on the volumetric method. We analyzed the hydration reaction rate with an unreacted-core shell model. In the experiments, the SrBr<sub>2</sub> equilibrium temperature observed was equal to the theoretical equilibrium temperature obtained from thermodynamic databases. In addition, the hysteresis gap between the hydration and dehydration values was 2.0 K. Thus, the hysteresis effect was negligible for the chemical heat pump cooling operation. The reaction fraction of the SrBr<sub>2</sub> hydration reached 0.7 within 20 s. By analyzing the hydration reaction rate with the unreacted-core shell model, the activation energy value was calculated to be56.6 kJ/mol. The calculation results showed good agreement with those of the experiment as the reaction fraction reached 0.7.
文摘为研究旋壳转速对腔内液体流动特性的影响,以试验旋喷泵为研究对象,在高度验证叶轮与旋壳同步旋转试验与模拟结果准确性的基础上,对叶轮转速相同、旋壳转速不同的5个模型采用RNG k-ε湍流模型进行数值计算,分析腔内液体流动特性的变化情况,研究泵的性能.结果表明:旋壳转速增大,液体圆周速度和旋转系数均增大,圆周速度曲线沿径向逐渐形成同心圆,腔内液体做非刚性旋转.腔内液体径向压力梯度增大,压力低于624 kPa时,旋壳转速越高,压力越小;压力高于624 kPa时,旋壳转速越高,压力越大.集流管迎流区涡分布在进口附近,尾迹区涡集中在扩散段结尾处,整体呈增大趋势.旋壳转速增大,泵的扬程升高,但效率降低,通过改变集流管进口直径发现集流管并非效率降低的主要原因,而是由圆盘摩擦损失的增大导致的,圆盘摩擦损失随旋壳转速增加呈3次幂函数式增大,文中最优进口直径为13 mm.
