Wrinkling in graded core/shell systems using symplectic formulation

Wrinkles in flat graded elastic layers have been recently described as a timevarying Hamiltonian system by the energy method.Cylindrical core/shell structures can also undergo surface instabilities under the external pressure.In this study,we show that by treating the radial direction as a pseudo-time variable,the graded core/shell system with radially decaying elastic properties can also be described within the symplectic framework.In combination with the shell buckling equation,the present paper addresses the surface wrinkling of graded core/shell structures subjected to the uniform external pressure by solving a series of ordinary differential equations with varying coefficients.Three representative gradient distributions are showcased,and the predicted critical pressure and critical wave number are verified by finite element simulations.The symplectic framework provides an efficient and accurate approach to understand the surface instability and morphological evolution in curved biological tissues and engineered structures.

GENERAL STRUCTURE OF OBPES SHELL SYSTEM

ＧＥＮＥＲＡＬＳＴＲＵＣＴＵＲＥＯＦＯＢＰＥＳＳＨＥＬＬＳＹＳＴＥＭ①ＬｉＳｏｎｇｒｅｎ，ＬｕｏＳｈｏｕｚｈａｎｇ，ＣｈｅｎＳｏｎｇｑｉａｏＤｅｐａｒｔｍｅｎｔｏｆＭｉｎｅｒａｌＥｎｇｉｎｅｒｉｎｇ，ＣｅｎｔｒａｌＳｏｕｔｈＵｎｉｖｅｒｓｉｔｙｏｆＴ...

Model-driven full system dynamics estimation of PMSM-driven chain shell magazine

Based on the system dynamic model, a full system dynamics estimation method is proposed for a chain shell magazine driven by a permanent magnet synchronous motor(PMSM). An adaptive extended state observer(AESO) is proposed to estimate the unmeasured states and disturbance, in which the model parameters are adjusted in real time. Theoretical analysis shows that the estimation errors of the disturbances and unmeasured states converge exponentially to zero, and the parameter estimation error can be obtained from the extended state. Then, based on the extended state of the AESO, a novel parameter estimation law is designed. Due to the convergence of AESO, the novel parameter estimation law is insensitive to controllers and excitation signal. Under persistent excitation(PE) condition, the estimated parameters will converge to a compact set around the actual parameter value. Without PE signal, the estimated parameters will converge to zero for the extended state. Simulation and experimental results show that the proposed method can accurately estimate the unmeasured states and disturbance of the chain shell magazine, and the estimated parameters will converge to the actual value without strictly continuous PE signals.

Experimental Study on Full-Surface Buckling of Variable Curvature Cylindrical Shell Using Multi-camera 3D-DIC System

To achieve full-surface strain measurement of variable curvature objects,a 360°3D digital image correlation(DIC)system is proposed.The measurement system consists of four double-camera systems,which capture the object’s entire surface from multiple angles,enabling comprehensive full-surface measurement.To increase the stitching quality,a hierarchical coordinate matching method is proposed.Initially,a 3D rigid body calibration auxiliary block is employed to track motion trajectory,which enables preliminary matching of four 3D-DIC sub-systems.Subsequently,secondary precise matching is performed based on feature points on the test specimen’s surface.Through the hierarchical coordinate matching method,the local 3D coordinate systems of each double-camera system are unified into a global coordinate system,achieving 3D surface reconstruction of the variable curvature cylindrical shell,and error analysis is conducted on the results.Furthermore,axial compression buckling experiment is conducted to measure the displacement and strain fields on the cylindrical shell’s surface.The experimental results are compared with the finite element analysis,validating the accuracy and effectiveness of the proposed multi-camera 3D-DIC measuring system.

用Turbo C的System()函数实现DOS SHELL功能时应注意的一个问题

本刊1994年第一期(创刊号)刊登了《用Turbo C实现SHELL功能》一文,文中给出了利用Turbo C的system()函数实现DOS SHELL功能的方法。具体的说,就是用如下的dosshell()函数实现DOSSHELL功能。 void dosshell()

Evil-hunter: a novel web shell detection system based on scoring scheme

In order to detect web shells that hackers inject into web servers by exploiting system vulnerabilities or web page open sources, a novel web shell detection system based on the scoring scheme is proposed, named Evil-hunter. First, a large set of malicious function samples normally used in web shells are collected from various sources on the Internet and security forums. Secondly, according to the danger level and the frequency of using these malicious functions in the web shells as well as in legal web applications, an assigning score strategy for each malicious sample is devised. Then, the appropriate score threshold value for each sample is obtained from the results of a statistical analysis. Finally, based on the threshold value, a simple algorithm is presented to identify files that contain web shells in web applications. The experimental results show that compared with other approaches, Evil-hunter can identify web shells more efficiently and accurately.

基于SHELL模型的航空货物运输安全问题研究

文章阐述了SHELL 模型的基本理论,分析了航空货物运输的基本流程及常见安全问题,应用SHELL模型重点探究航空货物运输中人与硬件(L-H)、人与软件(L-S)、人与环境(L-E)及人与人(L-L)的要素特征与关系界面,梳理引发安全问题导致不安全事件的原因,提出缩小关系界面空隙、提高关系匹配度的措施,保障航空货物运输安全,促进航空货运持续稳定发展。

基于Shell脚本的KVM虚拟化技术应用

虚拟化技术是当前计算机信息技术中一个新的变革,其中开源的虚拟化技术(Kernel-Based Virtual Machines,KVM)更是以稳定、高效、经济而著称,为科学研究、工程仿真等领域提供了强大的计算能力。文章以某高职院校虚拟化应用为实例,探讨在普通高职院校的虚拟化技术应用管理中使用Shell脚本进行智能化管理,并展示其技术用于云平台辅助管理的优势,为用户轻便智能管理KVM虚拟化技术应用提供参考。

Analysis of motion on agile shell-feeding system

Since cannon drum of agile shell-feeding system rotates frequently and intermittently, its motion must be steady. Outline of driving cam determines the motion of cannon drum, so it is necessary to select the proper outline of cam. Through analysis of parabolic outline and cycloid outline of the cams, the outline that combines the two curves is obtained. According to the demand of production,the value of the outline is revised, and then the method of fitting curve is used to get the expression of the angle of cam and the displacement of the driven part. Through analyzing the motion of the cannon drum, it is suggested that the angle of the cam is proportion to the displacement of the driven part. The cam with the specially derived outline can move steadily.

Mechanical and thermal postbuckling of FGM thick circular cylindrical shells reinforced by FGM stiffener system using higher-order shear deformation theory

The postbuckling of the eccentrically stiffened circular cylindrical shells made of functionally graded materials （FGMs）, subjected to the axial compressive load and external uniform pressure and filled inside by the elastic foundations in the thermal environments, is investigated with an analytical method. The shells are reinforced by FGM stringers and rings. The thermal elements of the shells and stiffeners in the fundamental equations are considered. The equilibrium and nonlinear stability equations in terms of the displacement components for the stiffened shells are derived with the third-order shear deformation theory and Leckhniskii smeared stiffener technique. The closed-form expressions for determining the buckling load and postbuckling load-deflection curves are obtained with the Galerkin method. The effects of the stiffeners, the foundations, the material and dimensional parameters, and the pre-existent axial compressive and thermal load are considered.

Dynamic Simulation of Mechanical System for Quickfeeding Shells in Gunboat4

A mechanical system for quickfeeding shells in gunboat is particularly analyzed from a dynamic view. SD nonlinear structural simulation is completed by means of dynamic explicit finite element method. Analysis results prove that the mechanical structure is feasible substantially, the material of outer surfaces near striking and overstress position should be improved and measures should be taken to avoid parts high temperature. And all analysis results give a principal theoretical basis for further work.

Snap-through behaviors and nonlinear vibrations of a bistable composite laminated cantilever shell:an experimental and numerical study

The snap-through behaviors and nonlinear vibrations are investigated for a bistable composite laminated cantilever shell subjected to transversal foundation excitation based on experimental and theoretical approaches.An improved experimental specimen is designed in order to satisfy the cantilever support boundary condition,which is composed of an asymmetric region and a symmetric region.The symmetric region of the experimental specimen is entirely clamped,which is rigidly connected to an electromagnetic shaker,while the asymmetric region remains free of constraint.Different motion paths are realized for the bistable cantilever shell by changing the input signal levels of the electromagnetic shaker,and the displacement responses of the shell are collected by the laser displacement sensors.The numerical simulation is conducted based on the established theoretical model of the bistable composite laminated cantilever shell,and an off-axis three-dimensional dynamic snap-through domain is obtained.The numerical solutions are in good agreement with the experimental results.The nonlinear stiffness characteristics,dynamic snap-through domain,and chaos and bifurcation behaviors of the shell are quantitatively analyzed.Due to the asymmetry of the boundary condition and the shell,the upper stable-state of the shell exhibits an obvious soft spring stiffness characteristic,and the lower stable-state shows a linear stiffness characteristic of the shell.

Mechanical Performance of Bio-inspired Bidirectional Corrugated Sandwich Pressure Shell Under External Hydrostatic Pressure

This paper aims to enhance the compression capacity of underwater cylindrical shells by adopting the corrugated sandwich structure of cuttlebone.The cuttlebone suffers uniaxial external compression,while underwater cylindrical shells are in a biaxial compressive stress state.To suit the biaxial compressive stress state,a novel bidirectional corrugated sandwich structure is proposed to improve the bearing capacity of cylindrical shells.The static and buckling analysis for the sandwich shell and the unstiffened cylindrical shell with the same volume-weight ratio are studied by numerical simulation.It is indicated that the proposed sandwich shell can effectively reduce the ratio between circumferential and axial stress from 2 to 1.25 and improve the critical buckling load by about 1.63 times.Numerical simulation shows that optimizing and adjusting the structural parameters could significantly improve the advantage of the sandwich shell.Then,the hydrostatic pressure tests for shell models fabricated by 3D printing are carried out.According to the experimental results,the overall failure position of the sandwich shell is at the center part of the sandwich shell.It has been found the average critical load of the proposed sandwich shell models exceeds two times that of the unstiffened shell models.Hence,the proposed bio-inspired bidirectional corrugated sandwich structure can significantly enhance the pressure resistance capability of cylindrical shells.

Cl/S与Na相互作用对Shell气化炉合成气冷却器入口积灰机制的影响

Shell干粉煤加压气化是煤炭洁净高效利用的重要技术之一,由碱金属化合物引起的合成气冷却器入口积灰结垢是导致气化炉非正常停工检修的主要原因。以添加不同含量的Na、Cl和S的Shell气化炉飞灰为原料,利用自主设计的高温竖直炉中沉积探针模拟Shell气化炉合成气冷却器入口管路,通过对积灰进行内、外分层研究,探讨内外层积灰质量的变化,并结合ICP-MS、IC、SEM-EDS和XRD等表征手段对内外层积灰的理化性质进行比较分析,获得Na、Cl、S和Fe等不同元素之间的相互作用对积灰行为的影响。结果表明,内层积灰质量随时间延长而增大,含S化合物的添加会降低内外层积灰质量,且外层积灰质量会随着时间延长而减小。Na更多以铝硅酸盐形式在外层积灰中存在,促进积灰增长;Cl通常以碱金属氯化物的形式集中在初始黏性层;S的存在会减缓管路积灰;当Cl和S共同存在时,Fe易与灰中的Si、Al和Na形成多种低温共熔物促进内、外层积灰熔融。Shell气化炉合成气冷却器入口积灰形成机制为:飞灰颗粒组分在Na、Cl、Si和Al的共同作用下,于内层形成碱金属氯化物和铝硅酸盐共晶;同时Cl、S的存在促使Fe和Na迁移到这些共晶中,形成Fe-O-Si、Fe-O-S和Fe-Na-O-Al-S共熔体。进而,铝硅酸盐与多种低温共熔体相互熔融使灰颗粒尺寸增加,促进积灰的进一步生长。

Optimizing high-coordination shell of Co-based single-atom catalysts for efficient ORR and zinc-air batteries

Atom-level modulation of the coordination environment for single-atom catalysts(SACs)is considered as an effective strategy for elevating the catalytic performance.For the MNxsite,breaking the symmetrical geometry and charge distribution by introducing relatively weak electronegative atoms into the first/second shell is an efficient way,but it remains challenging for elucidating the underlying mechanism of interaction.Herein,a practical strategy was reported to rationally design single cobalt atoms coordinated with both phosphorus and nitrogen atoms in a hierarchically porous carbon derived from metal-organic frameworks.X-ray absorption spectrum reveals that atomically dispersed Co sites are coordinated with four N atoms in the first shell and varying numbers of P atoms in the second shell(denoted as Co-N/P-C).The prepared catalyst exhibits excellent oxygen reduction reaction(ORR)activity as well as zinc-air battery performance.The introduction of P atoms in the Co-SACs weakens the interaction between Co and N,significantly promoting the adsorption process of ^(*)OOH,resulting in the acceleration of reaction kinetics and reduction of thermodynamic barrier,responsible for the increased intrinsic activity.Our discovery provides insights into an ultimate design of single-atom catalysts with adjustable electrocatalytic activities for efficient electrochemical energy conversion.

Vibration control in reticulated shells using viscous dampers system

A finite-element analysis program was developed for the reducing vibration system of viscous damper incorporated into reticulated shells, and a lot of numerical calculations were done on vibration control in reticulated shells. With viscous dampers suitable for reticulated shells designed are developed, and performance tests run for them one K6 reticulated shell model is designed and developed, and a reducing vibration shaking table experiment was conducted with a viscous damper on this shell model. All these come to a conclusion that the reducing vibration system of viscous damper can be applied to reticulated shells.

Enhancing electromagnetic wave absorption with core‐shell structured SiO_(2)@MXene@MoS_(2) nanospheres

Material composition and structural design are important factors influencing the electromagnetic wave(EMW)absorption performance of materials.To alleviate the impedance mismatch attributed to the high dielectric constant of Ti_(3)C_(2)T_(x)MXene,we have successfully synthesized core‐shell structured SiO_(2)@MXene@MoS_(2)nanospheres.This architecture,comprising SiO_(2) as the core,MXene as the intermediate layer,and MoS_(2) as the outer shell,is achieved through an electrostatic self‐assembly method combined with a hydrothermal process.This complex core‐shell structure not only provides a variety of loss mechanisms that effectively dissipate electromagnetic energy but also prevents self‐aggregation of MXene and MoS_(2) nanosheets.Notably,the synergistic combination of SiO_(2) and MoS_(2) with highly conductive MXene enables the suitable dielectric constant of the composites,ensuring optimal impedance matching.Therefore,the core‐shell structured SiO_(2)@MXene@MoS_(2) nanospheres exhibit excellent EMW absorption performance,featuring a remarkable minimum reflection loss(RL_(min))of−52.11 dB(2.4 mm).It is noteworthy that these nanospheres achieve an ultra‐wide effective absorption bandwidth(EAB)of 6.72 GHz.This work provides a novel approach for designing and synthesizing high‐performance EMW absorbers characterized by“wide bandwidth and strong reflection loss.”

Research on cylindrical shell vibration reduction systems

Longitudinal and horizontal vibration must both be reduced in an effective vibration isolation system. We present a cylindrical shell vibration isolator as a dynamic system composed of four springs and dampers. Vibration is directly produced by the motion of machinery, and more is subsequently generated by harmonic frequencies within their structure. To test the effectiveness of our isolator, we first determined equations for the transmission of vibration from the machine to its cylindrical shell. Damping effects produced by the vibration parameters of our system are then analyzed.

The Hamilton System and Hamilton Type Generalized Variational Principle for the Laminated Composite Plates and Shells

By introducing the Hamilton theory and algorithms into the problems of laminated composite plates andshells, the Hamiltion type generalized variational principle is established, and the Hamilton canonical equations andthe boundary conditions for the static and elastoplastic analysis of composite plates are presented. With thetransformation of phase variables, the Hamilton canonical equations and their boundary conditions for thecylindrical shells and doubly curved shells in the curvilinear coordinate are given.

基于Python和Shell的《Linux实训项目自测平台》软件设计

近年来,Linux操作系统在各国不断地发展与推广,高等院校开设的Linux操作系统课程也越来越受到重视。通过对软件界面设计及在Linux操作系统中检测实训项目的几种常用方式进行分析和研究,给操作系统课程教学提供一种教学思路,同时对Linux教学辅助软件开发者提供一些借鉴和参考。