Study on Electromagnetic Shielding Effectiveness of Ni-P-La Alloy Coatings

Ni-P and Ni-P-La alloy coatings were prepared by electroplating. Electromagnetic shielding effectiveness under the different components of rare earth or the different operating conditions was tested by the network analyzer. The results show that electromagnetic shielding effectiveness of Ni-P-La alloy coating varies from 45 dB to 70 dB with the variety of the frequency from 10 MHz to 350 MHz. Corrosion of the salt fog impacts on the electromagnetic shielding effectiveness a little. A small amount of rare earth added to plating bath can not only enhance corrosion resistance of coating, but make electromagnetic shielding effectiveness increase by 1 ~ 5 dB.

Study on Shielding Effectiveness of Fabric for Electromagnetic Wave with Different Inlaid Distances of Metal Fibres

The electremagnetic radicalization has become more serious. The shielding effectiveness of polyester fabrics with different inlaid distance of parallel metal fibres to electromagnetic wave was studied in this paper on special instrument made by ourselves. The results of test show that the fabric with different inlaid distances of metal fibres and the testing angle between electric field plane and parallel metal fibres of have obvious effect on the shielding effectiveness of electromagnetic wave.

Calculating magnetic shielding effectiveness for high-power dc comparator by magnetic circuit method

Magnetic shielding is very important in the design of a high-power dc comparator. This paper addressed the application of magnetic circuit method to calculate the magnetic shielding effectiveness of high-power dc comparators when an external radial magnetic field is added. The mathematical relationship between the magnetic shielding effectiveness and the parameters of the magnetic shielding body were obtained. To verify the validity of the calculation method, we developped a procedure to measure the magnetic shielding effectiveness of the magnetic body by measuring the induction voltage of the detection winding instead of the magnetic intensity at a point in the magnetic shielding body, making the manipulation much easier. The result calculated with the magnetic circuit method turns out to be closer to the measured one compared with that calculated with a conventional algorithm proposed by Ren, suggesting that the magnetic circuit method is an applicable tool for estimating the toroidal cavity magnetic shielding effectiveness of a heavy current comparator when a radial magnetic field is added.

Analysis on the Magnetic Shielding Effectiveness of DC Current Comparator

There are magnetic interference problems in the applications of DC current comparator. Analysis on the magnetic effectiveness which is applied by the external magnetic field is introduced in this paper. The effectiveness is proved by the actual results which are compared with the magnetic- circuit method and the finite element method. In addition, the reference comment is given which can be used in the practical work of DC current comparator shield design.

Correlation between Electrical Conductivity and Microwave Shielding Effectiveness of Natural Rubber Based Composites, Containing Different Hybrid Fillers Obtained by Impregnation Technology

The paper presents the synthesis and characterization of carbon black/silicone dioxide hybrid fillers obtained by an impregnation technology. The electromagnetic interference shielding effectiveness of the composites filled with carbon black/silicone dioxide hybrid fillers was measured in wide frequency range of 1 - 12 GHz. The dc and ac electrical conductivity of composites also have been investigated. The relationship between electrical (dc and ac) conductivity and shielding effectiveness was analyzed. A positive correlation was found between the absorptive shielding effectiveness and ac conductivity for composites comprising conductive carbon black/silica filler, when the filler loading is above the percolation threshold.

Revealing the key role of non-solvating diluents for fast-charging and low temperature Li-ion batteries

Fast-charging and low temperature operation are of vital importance for the further development of lithium-ion batteries(LIBs),which is hindered by the utilization of conventional carbonate-based electrolytes due to their slow kinetics,narrow operating temperature and voltage range.Herein,an acetonitrile(AN)-based localized high-concentration electrolyte(LHCE)is proposed to retain liquid state and high ionic conductivity at ultra-low temperatures while possessing high oxidation stability.We originally reveal the excellent thermal shielding effect of non-solvating diluent to prevent the aggregation of Li^(+) solvates as temperature drops,maintaining the merits of fast Li transport and facile desolvation as at room temperature,which bestows the graphite electrode with remarkable low temperature performance(264 mA h g^(-1) at-20 C).Remarkably,an extremely high capacity retention of 97%is achieved for high-voltage high-energy graphite||NCM batteries after 250 cycles at-20 C,and a high capacity of 110 mA h g^(-1)(71%of its room-temperature capacity)is retained at-30°C.The study unveils the key role of the non-solvating diluents and provides instructive guidance in designing electrolytes towards fast-charging and low temperature LIBs.

Bone graft incorporation failure with inappropriate limb load transfer can lead to aseptic acetabular loosening of metal-on-metal prosthesis: A case report

BACKGROUND Aseptic acetabular loosening can result from various factors that can be categorized into groups:patient-related,surgeon-related and implant-related.We present a case of a 63-year-old patient who at first underwent a total hip arthro-plasty(THA)using a metal-on-metal bearing due to hip arthrosis.Follow-up visits revealed no complications after the procedure.Two years after the THA,acetabular component loosening occurred due to subsequent trauma of the opposite hip,necessitating a revision THA using a ceramic-on-ceramic bearing.CASE SUMMARY We aim to illustrate a rare case where the primary reason for undergoing THA revision was not only incomplete bone graft incorporation but also improper limb load distribution.Following the revision arthroplasty,a 9-year follow-up visit revealed improvements in all evaluation measures on questionnaire compared to the state before surgery:Harris Hip Score(before surgery:15;after surgery:95),Western Ontario and McMaster Universities Arthritis Index(before surgery:96;after surgery:0),and Visual Analogue Scale(before surgery:10;after surgery:1).CONCLUSION Opposite-hip trauma caused a weight transfer to the limb after a THA procedure.This process led to a stress shielding effect,resulting in acetabular component loosening.

Electromagnetic Shielding and Absorption Properties of Fiber Reinforced Cementitious Composites

In order to investigate the electromagnetic shielding effectiveness （SE） and absorbing properties of fiber reinforced concrete, steel fiber, carbon fiber and synthetic polyvinyl alcohol （PVA） fiber reinforced concrete were researched. The results show that with the increase of fiber Volume fraction, the SE and trend of frequency change of corresponding fiber reinforced concrete are enhanced. When the volume content of steel fiber is 3%, the SE of concrete is above 50 dB and its frequency is above 1.8 GHz. Moreover, in the range of 8-18 GHz, steel fiber, carbon fiber and PVA fiber all can improve the microwave absorption properties of concrete. The concrete with 0.5% carbon fiber can achieve the best absorbing property, the minimum reflectivity is about -7 dB; while steel fiber optimal volume fraction is 2%. The reflectivity curve of PVA fiber reinforced concrete fluctuates with the frequency, and the minimum value of the reflectivity is below -10 dB. The results show that fiber reinforced concrete could be used as EMI（electromagnetic interference） prevention buildings by attenuating and reflecting electromagnetic wave energy.

Performance of Polyaniline-coated Short Carbon Fibers in Electromagnetic Shielding Coating

Combined nitric acid oxidation method and polyaniline （PANI）-coated method were applied to modify the surface properties of short carbon fibers （SCF）. The electrical and mechanical properties of acrylic coatings with 50 wt pct PANI-coated carbon fiber were investigated by using scanning electron microscope （SEM）, UV-Vis spectrophotometer, four-probe method and the coaxial cable method. The results of the pH measurement and XPS （X-ray photoelectron spectroscopy） patterns showed that the oxygen functional groups, such as -OH and -COOH, were attached on the carbon fiber surfaces after oxidation treatment. The XPS analysis of PANl-coated oxidized SCF （PAOSCF） revealed that PANI may bond on the surface of oxidized SCF with chemical bonds. SEM images and surface roughness analyses showed that PANl-coated layer changed the surface morphology. Compared with SCF/acrylic coating, the surface resistivity of PAOSCF/acrylic coating decreased from17.1 to 5.3 Ω/sq and the shielding efficiency （SE） value increased from 1.54 to 23.3 dB.

Shielding effect and emission criterion of a screw dislocation near an interfacial blunt crack

Shielding effect and emission criterion of a screw dislocation near an interracial blunt crack are dealt with in this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentials and stress fields due to a screw dislocation located near the interracial blunt crack. The stress intensity factor on the crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of the orientation of the dislocation and the morphology of the blunt crack as well as the material elastic dissimilarity on the shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations can reduce the stress intensity factor of the interfacial blunt crack tip （shielding effect）. The shielding effect increases with the increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuth angle. The critical loads at infinity for dislocation emission increases with the increase of emission angle and curvature radius of blunt crack tip, and the most probable angle for screw dislocation emission is zero. The present solutions contain previous results as special cases.

A transparent electromagnetic-shielding film based on one-dimensional metal–dielectric periodic structures

In this study, we designed and fabricated optical materials consisting of alternating ITO and Ag layers. This approach is considered to be a promising way to obtain a light-weight, ultrathin and transparent shielding medium, which not only transmits visible light but also inhibits the transmission of microwaves, despite the fact that the total thickness of the Ag film is much larger than the skin depth in the visible range and less than that in the microwave region. Theoretical results suggest that a high dielectric/metal thickness ratio can enhance the broadband and improve the transmittance in the optical range. Accordingly, the central wavelength was found to be red-shifted with increasing dielectric/metal thickness ratio. A physical mechanism behind the controlling transmission of visible light is also proposed. Meanwhile, the electromagnetic shielding effectiveness of the prepared structures was found to exceed 40 dB in the range from 0.1 GHz to 18 GHz, even reaching up to 70 dB at 0.1 GHz, which is far higher than that of a single ITO film of the same thickness.

Gravitational Shielding Effect in Gauge Theory of Gravity

In 1992,E.E.Podkletnov and R.Nieminen found that under certain conditions,ceramic superconductor with composite structure reveals weak shielding properties against gravitational force.In classical Newton's theory of gravity and even in Einstein's general theory of gravity,there are no grounds of gravitational shielding effects.But in quantum gauge theory of gravity,the gravitational shielding effects can be explained in a simple and natural way.In quantum gauge theory of gravity,gravitational gauge interactions of complex scalar field can be formulated based on gauge principle.After spontaneous symmetry breaking,if the vacuum of the complex scalar field is not stable and uniform,there will be a mass term of gravitational gauge field.When gravitational gauge field propagates in this unstable vacuum of the complex scalar field,it will decays exponentially,which is the nature of gravitational shielding effects.The mechanism of gravitational shielding effects is studied in this paper,and some main properties of gravitational shielding effects are discussed.

Shielding Effect and Emission Criterion of a Screw Dislocation Near an Interfacial Crisscross Crack

Shielding effect and emission criterion of a screw dislocation near an interracial crisscross crack are dealt within this paper. Utilizing the conformal mapping technique, the closed-form solutions are derived for complex potentialsand stress fields due to a screw dislocation located near the interracial crisscross crack. The stress intensity factor onthe crack tips and the critical stress intensity factor for dislocation emission are also calculated. The influence of theorientation of the dislocation and the morphology of the crisscross crack as well as the material elastic dissimilarity onthe shielding effect and the emission criterion is discussed in detail. The results show that positive screw dislocations canreduce the stress intensity factor of the interracial crisscross crack tip (shielding effect). The shielding effect increases withthe increase of the shear modulus of the lower half-plane, but it decreases with the increase of the dislocation azimuthangle and the distance between the dislocation and the crack tip. The critical loads at infinity for dislocation emissionincreases with the increase of emission angle and the vertical length of the crisscross crack, and the most probable anglefor screw dislocation emission is zero. The present solutions contain previous results as special cases.

The Shielding Effect of Multi-Pile Structures on Ice Force

The shielding effect of the front pile-row on the ice force acting on the back pile-row is studied by ice force model tests. In the tests, the front pile-row is designed to model jacket legs and the back pile-row to model the water resisting pipe-phalanx within the jacket. The shielding factor for ice force corresponding to different conditions are given in this paper. The research indicates that there are many factors, including the longitudinal and lateral spacing between the front and back pile-row, ice attacking angle and the ratio of pile diameter to ice thickness, that influence the shielding effect on ice force.

Shielding effect of a nano-circular inclusion acting on semi-infinite wedge cracks

The model of a screw dislocation near a semi-infinite wedge crack tip inside a nano-circular inclusion is proposed to investigate the shielding effect of nano inclusions acting on cracks. Utilizing the complex function method, the closed-form solutions of the stress fields in the matrix and the inclusion region are derived. The stress intensity factor, the image force, as well as the critical loads for dislocation emission are discussed in detail. The results show that the nano inclusion not only enhances the shielding effect exerted by the dislocation, but also provides a shielding effect itself. Moreover, dislocations may be trapped in the nano inclusion even if the matrix is softer than the inclusion. This helps the dislocation shield crack, and reduces the dislocation density within the matrix.

Performance study of aluminum shielded room for ultra-low-field magnetic resonance imaging based on SQUID： Simulations and experiments

The aluminum shielded room has been an important part of ultra-low-field magnetic resonance imaging （ULF MRI） based on the superconducting quantum interference device （SQUID）. The shielded room is effective to attenuate the external radio-frequency field and keep the extremely sensitive detector, SQUID, working properly. A high-performance shielded room can increase the signal-to-noise ratio （SNR） and improve image quality. In this study, a circular coil with a diameter of 50 cm and a square coil with a side length of 2.0 m was used to simulate the magnetic fields from the nearby electric apparatuses and the distant environmental noise sources. The shielding effectivenesses （SE） of the shielded room with different thicknesses of aluminum sheets were calculated and simulated. A room using 6-mm-thick aluminum plates with a dimension of 1.5 m x 1.5 m x 2.0 m was then constructed. The SE was experimentally measured by using three-axis SQUID magnetometers, with tranisent magnetic field induced in the aluminum plates by the strong pre-polarization pulses. The results of the measured SE agreed with that from the simulation. In addition, the introduction of a 0.5-mm gap caused the obvious reduction of SE indicating the importance of door design. The nuclear magnetic resonance （NMR） signals of water at 5.9 kHz were measured in free space and in a shielded room, and the SNR was improved from 3 to 15. The simulation and experimental results will help us design an aluminum shielded room which satisfies the requirements for future ULF human brain imaging. Finally, the cancellation technique of the transient eddy current was tried, the simulation of the cancellation technique will lead us to finding an appropriate way to suppress the eddy current fields.

Synthesis of two derivatives of tigogenyl disaccharides containing N-acetylglucosamine and the long range shielding effect of benzoyl groups

Two tigogenyl glycosides containing N-acetylglucosamine were synthesized. Their structures were confirmed by ^1H and ^13C NMR spectra. The shielding effect caused by benzoyl groups was elucidated by ^1H NMR, COSY, HSQC, HMBC spectroscopy.

Trace Amounts of Triple-Functional Additives Enable Reversible Aqueous Zinc-Ion Batteries from a Comprehensive Perspective

Although their cost-effectiveness and intrinsic safety,aqueous zinc-ion batteries suffer from notorious side reactions including hydrogen evolution reaction,Zn corrosion and passivation,and Zn dendrite formation on the anode.Despite numerous strategies to alleviate these side reactions have been demonstrated,they can only provide limited performance improvement from a single aspect.Herein,a triple-functional additive with trace amounts,ammonium hydroxide,was demonstrated to comprehensively protect zinc anodes.The results show that the shift of electrolyte pH from 4.1 to 5.2 lowers the HER potential and encourages the in situ formation of a uniform ZHS-based solid electrolyte interphase on Zn anodes.Moreover,cationic NH^(4+)can preferentially adsorb on the Zn anode surface to shield the“tip effect”and homogenize the electric field.Benefitting from this comprehensive protection,dendrite-free Zn deposition and highly reversible Zn plating/stripping behaviors were realized.Besides,improved electrochemical performances can also be achieved in Zn//MnO_(2)full cells by taking the advantages of this triple-functional additive.This work provides a new strategy for stabilizing Zn anodes from a comprehensive perspective.

Direct conversion of CO_(2)to graphene via vapor–liquid reaction for magnesium matrix composites with structural and functional properties

Converting CO_(2)to valuable materials is attractive in environmental protection and resource utilization.In this study,a vapor-liquid interface reaction system for mass production of high-quality graphene is reported.The graphene obtained has high crystallinity and few defects during the reaction of CO_(2)and Mg melt.The growth mechanism of graphene is demonstrated in vapor-liquid interface area by combining the CO_(2)bubbles as a soft template to guide growth with the confinement effect of dense MgO nanoparticles.The quality of the graphene is verified by epoxy composites with high electromagnetic shielding effectiveness.Additionally,the V-L reaction method ingeniously solves the dispersion of graphene in metal,providing a preparation strategy of Mg matrix composites with structure and function integration.

Achieving Excellent Electromagnetic Interference Shielding Effectiveness in High Rare Earth Mg-12Gd-3Y alloy via Nd Addition Combined with Hot Rolling and Aging

Achieving excellent electromagnetic interference(EMI)shielding effectiveness(SE)in high rare earth(RE)-content Mg alloys is currently a significant technical challenge.This work systematically investigated the effects of different Nd elements on the electrical conductivity and EMI SE of Mg-12Gd-3Y-xNd alloy by adding Nd elements to the high RE content Mg-12Gd-3Y alloy,followed by a combined process of hot rolling and aging(R-A).The results indicate that the addition of Nd elements leads to reduced solid solubility of Gd and Y,resulting in a large amount of precipitation.The Mg-12Gd-3Y-2.0Nd alloy has the optimum EMI SE after 63%R-A treatment,reaching 88-118 dB at 30-1500 MHz.The Mg-12Gd-3Y-xNd alloy has acicular and granular forms of the Mg5(Gd,Y,Nd)(abbreviated as Mg5RE)phase after R-A treatment.The granular Mg5RE phase gradually breaks up and refines into more minor scales with increasing rolling reduction and is diffusely distributed in the matrix.The acicular Mg5RE phase is densely arranged,with cross-distribution in some areas.The cross-distributed acicular Mg5RE phase,the delicate granular Mg5RE phase,and the denseβ′phase provide more interfaces for reflecting electromagnetic waves and increase the multiple reflection loss of incident electromagnetic waves.In addition,the Mg-12Gd-3Y-xNd alloy deflects most of the c-axis of the grains parallel to the normal direction(ND)as the rolling reduction increases,making the impedance difference between the plate surface and air larger.The increased impedance makes the material reflect more loss to incident electromagnetic waves.The combined use of these two leads to an excellent EMI SE of Mg-12Gd-3Y-xNd with high RE content after R-A treatment.