Ship Resistance of Quadramaran With Various Hull Position Configurations

Multihull ships are widely used for sea transportation, and those with four hulls are known as quadramarans. Hull position configurations of a quadramaran include the diamond, tetra, and slice. In general, multihull vessels traveling at high speeds have better hydrodynamic efficiency than monohull ships. This study aims to identify possible effects of various quadramaran hull position configurations on ship resistance for hull dimensions of 2 m length, 0.21 m breadth, and 0.045 m thickness. We conducted a towing test in which we varied the hull spacing and speed at Fr values between 0.08 and 0.62 and measured the total resistance using a load cell transducer. The experimental results reveal that the lowest total resistance was achieved with a diamond quadramaran configuration at Fr = 0.1-0.6 and an effective interference factor of up to 0.35 with S/L = 3/10 and R/L = 1/2 at Fr = 0.62.

Numerical Investigation of the Effect of Surface Roughness on the Viscous Resistance Components of Surface Ships

Recently,computational fluid dynamics(CFD)approaches have been effectively used by researchers to calculate the resistance characteristics of ships that have rough outer surfaces.These approaches are mainly based on modifying wall functions using experimentally pre-determined roughness functions.Although several recent studies have shown that CFD can be an effective tool to calculate resistance components of ships for different roughness conditions,most of these studies were performed using the same ship geometry(KRISO Container Ship).Thus,the effect of ship geometry on the resistance characteristics of rough hull surfaces is worth investigating.In this study,viscous resistance components of four different ships are calculated for different roughness conditions.First,flat plate simulations are performed using a previous experimental study for comparison purposes.Then,the viscous resistance components of three-dimensional hulls are calculated.All simulations are performed using two different turbulence models to investigate the effect of the turbulence model on the results.An examination of the distributions of the local skin friction coefficients of the DTMB 5415 and Series 60 showed that the plumpness of the bow form has a significant effect on the increase in frictional resistance with increasing roughness.Another significant finding of the study is that viscous pressure resistance is directly affected by the surface roughness.For all geometries,viscous pressure resistances showed a significant increase for highly rough surfaces.

Resistance Analysis of Unsymmetrical Trimaran Model with Outboard Sidehulls Configuration

The application of multi-hull ship or trimaran vessel as a mode of transports in both river and sea environments have grown rapidly in recent years.Trimaran vessels are currently of interest for many new high speed ship projects due to the high levels of hydrodynamic efficiency that can be achieved,compared to the mono-hull and catamaran hull forms.The purpose of this study is to identify the possible effects of using an unsymmetrical trimaran ship model with configuration（S/L） 0.1-0.3 and R/L=0.1-0.2.Unsymmetrical trimaran ship model with main dimensions： L=2000mm,B=200 mm and T=45 mm.Experimental methods（towing tank） were performed in the study using speed variations at Froude number 0.1-0.6.The ship model was pulled by an electric motor whose speed could be varied and adjusted.The ship model resistance was measured precisely by using a load cell transducer.The comparison of ship resistance for each configuration with mono-hull was shown on the graph as a function of the total resistance coefficient and Froude number.The test results found that the effective drag reduction could be achieved up to 17% at Fr=0.35 with configuration S/L=0.1.

Resistance and Seakeeping Numerical Performance Analyses of a Semi-Small Waterplane Area Twin Hull at Medium to High Speeds

The hydrodynamic analysis of a new semi-small waterplane area twin hull （SWATH） suitable for various applications such as small and medium size passenger ferries is presented. This may be an attractive crossover configuration resulting from the merging of two classical shapes： a conventional SWATH and a fast catamaran. The final hull design exhibits a wedge-like waterline shape with the maximum beam at the stem; the hull ends with a very narrow entrance angle, has a prominent bulbous bow typical of SWATH vessels, and features full stern to arrange waterjet propellers. Our analysis aims to perform a preliminary assessment of the hydrodynamic performance of a hull with such a complex shape both in terms of resistance of the hull in calm water and seakeeping capability in regular head waves and compare the performance with that of a conventional SWATH. The analysis is performed using a boundary element method that was preliminarily validated on a conventional SWATH vessel.

船体风机叶片对中速船水动力性能影响的计算分析

The importance of reducing ship resistance is growing considerably as a result of the increase in atmospheric emissions and the drive towards green shipping through decarbonization.Until this point,Energy Saving Devices(ESD),in particular,Hull Vane®(HV),have been widely applied as a potential technique for reducing wave-making resistance for vessels with higher Froude Number(Fr).The advantages of HV for a medium-speed vessel,where the wave-making component accounts for almost 50%of total resistance,have yet to be investigated.This study presents the computational analysis of the KCS model(1∶75.5);for a particular trim condition by using the VOF method and RANS solver.The hull acts as a candidate vessel for the class of medium-speed characteristics.A total of 36 numerical simulations were carried out to study the changes in resistance and motion characteristics of the vessel with and without HV.To validate the numerical setup,the experimental work of Hou et al(2020)on the DTMB hull was used.The effectiveness of HV can be comprehended by the reduction percentage in total resistance,trim,sinkage,and transom wave height,in comparison to bare hull condition.The reduction in total resistance extends up to 6%for Fr=0.32 with configuration 2 with negative AoF.The CFD results indicate that there is a reduction in trim up to 57%for the maximum speed with a corresponding Fr=0.34 with a positive angle of foil(AoF).The trim correction effect is increasing with the depth of submergence of HV.Concerning sinkage,there occurs nearly a 31%reduction for Fr=0.34 with a positive AoF.There exists a substantial reduction in the height of the transom wave with the inclusion of HV,the results of which are discussed in detail.From the presented results,retrofitting the Hull Vane®is effective in the selected speed range but pronouncing as the speed of the vessel increases.

Method to Calculate Resistance of High-Speed Displacement Ship Taking the Effect of Dynamic Sinkage and Trim and Fluid Viscosity into Account

A method is presented to calculate the resistance of a high-speed displacement ship taking the effect of sinkage and trim and viscosity of fluid into account.A free surface flow field is evaluated by solving Reynolds averaged Navier-Stokes(RANS) equations with volume of fluid(VoF) method.The sinkage and trim are computed by equating the vertical force and pitching moment to the hydrostatic restoring force and moment.The software Fluent,Maxsurf and MATLAB are used to implement this method.With dynamic mesh being used,the position of a ship is updated by the motion of "ship plus boundary layer" grid zone.The hull factors are introduced for fast calculating the running attitude of a ship.The method has been applied to the ship model INSEAN2340 for different Froude numbers and is found to be efficient for evaluating the flow field,resistance,sinkage and trim.

Liutex-based centripetal force field model for improving the resistance and wake performances of JBC ship sailing in calm water

For complex aerodynamic and hydrodynamic problems,the analysis of vortex is very important.The Liutex method is an eigenvalue-based method which is local,accurate,and unique,which can give an accurate definition of vortex,so the control of vortex can be implemented and effectively guaranteed.Based on Liutex method,two methodologies of centripetal force model and counter-rotation force model were proposed to illustrate the vortex dynamics and possibly strengthen or weaken the vortices.In this paper,the Liutex-based centripetal force model is applied by adding a source term to the Navier-Stokes equations.In order to investigate the influence of the constructed Liutex force model on the 3-dimensional flow around a slow-fat ship,the calm-water drag calculation result of JBC ship is regarded as the initial flow field,and the new resistance and wake performances of the ship are obtained after applying the centripetal force model to the flow field with different strengths.Several views of the comparisons of the new steady flow fields are shown,and the parametric study results indicate that the Liutex-based centripetal force model can effectively change the resistance and wake performances of the JBC ship,which provides a new idea and theoretical basis for the comprehensive hydrodynamic performance optimization of the ship hull.

Numerical Study on the Hydrodynamic Performance of Antifouling Paints

This study presents a simple numerical method that can be used to evaluate the hydrodynamic performances of antifouling paints.Steady Reynolds-averaged Navier-Stokes equations were solved through a finite volume technique,whereas roughness was modeled with experimentally determined roughness functions.First,the methodology was validated with previous experimental studies with a flat plate.Second,flow around the Kriso Container Ship was examined.Lastly,full-scale results were predicted using Granville’s similarity law.Results indicated that roughness has a similar effect on the viscous pressure resistance and frictional resistance around a Reynolds number of 10^7.Moreover,the increase in frictional resistance due to roughness was calculated to be approximately 3%-5%at the ship scale depending on the paint.

Effects of finite water depth and lateral confinement on ships wakes and resistance

Wash waves produced by ships disintegrate river banks and coastal lines. This phenomenon of bank erosion is mainly due to the height of the waves. Various factors govern the formation of these waves and their amplitudes: the geometry of the water channel, the shape and the speed of the boat, etc.. These factors play an important role on the wave generation, in addition on the resistance of the ship and so on its fuel consumption. Whether to study the impact of wash waves on the ship's environment or its resistance, the analysis of the generated wake is essential. Hence a fine characterization of the wave field is necessary. This study proposes a comparison of wakes generated by two generic ships based on a Wigley hull with block coefficients 0.67 and 0.89 respectively representative of maritime and fluvial ships. The wakes generated in deep water and confined water configurations have been measured for different Froude numbers by a non-intrusive optical stereo-correlation method, giving access to a detailed and complete definition of the generated wave fields. The resistance of the ship hulls has been measured in deep and confined water configurations with a hydrodynamic balance. The results permit one to study the influence of both hull and water channel geometries on the ship wake, on the amplitude of the far-field generated waves and on the near-field hydrodynamic response. Moreover, resistance curves are obtained for both configurations and highlight the effect of both hull and water channel geometries on the resistance coefficient of the ship. A comparison of the resistance curves with or without the ship trim is conducted and shows the influence of the trim on the resistance coefficient in the different ship speed regimes.

CFD-based hull optimization in calm water using adaptive grid deformation method

This paper presents an adaptive grid deformation technique for optimizing ship hull forms using computational fluid dynamics(CFD).The proposed method enables accurate and smooth updates of the hull surface and 3-D CFD grids in response to design variables.This technique incorporates a two-level point-transformation approach to move the grid points by a few design points.Initially,generic B-splines are utilized to transform grid points according to the displacements of the control points within a defined control box.This ensures surface modification accuracy and smoothness,similar to those provided by non-uniform rational B-splines.Subsequently,radial basis functions are used to interpolate the movements of the control points with a limited set of design points.The developed method effectively maintains the mesh quality and simulation efficiency.By applying this method to surface and grid adaptation,a regression model is proposed in the form of a second-order polynomial to represent the relationship between the geometric parameters and design variables.This polynomial is then used to introduce geometric constraints.Furthermore,a radial basis function surrogate model for the calm-water resistance is constructed to approximate the objective function.An enhanced optimization framework is proposed for CFD–based hull optimization and applied to KVLCC2 to validate its feasibility and efficiency.

Research progress on the hydrodynamic performance of water-air-bubble mixed flows around a ship

The interaction between ship and surrounding fluids generates the water-air-bubble mixed flow laden with numerous droplets and bubbles.The water-air-bubble mixed flow is a complex multi-phase flow phenomenon,which involves intense air-water mixture,complex evolution of interface shape,interactions between multi-scale flow structures and strong turbulent fluctuations.Based on the field observations at sea,a large range of white water-air-bubble flow exists widely around a large-scale sailing ship,and directly affects the hydrodynamic performance of ship from various aspects.This paper reviews the research progress of water-air-bubble mixed flow around a ship.Current knowledge about the formation and evolution mechanism are introduced firstly.Then,the effects of the water-air-bubble mixed flow on ship performance are further reviewed,the main concerns are ship resistance,propulsion performance,slamming and maneuverability.Finally,the future research prospects are summarized.

Study of Resistance Performance of Vessels with Notches by Experimental and Computational Fluid Dynamics Calculation Methods

Owing to the special working characteristics and operation requirements,lots of working ships have notches in different sizes and shapes in their hulls.In order to study the resistance performance of the vessel with notches,a series of model resistance tests were performed in respect to the 4 500 m 3 /h cutter suction dredger,and the tests were simulated based on the computational fluid dynamics software FLUENT.Based on analysis to the experimental data and the computational fluid dynamics(CFD) calculation results,the change of the flow field and the resistance performance caused by the notches were studied,and the reliability of the software in simulation of viscous flow around the hull was proved.It provides the basis for the future study and the design optimization of this kind of working ships.