Analysis of multiple-faults of high-voltage circuit breakers based on non-negative matrix decomposition

High-voltage circuit breakers are the core equipment in power networks,and to a certain extent,are related to the safe and reliable operation of power systems.However,their core components are prone to mechanical faults.This study proposes a component separation method to detect multiple mechanical faults in circuit breakers that can achieve online real-time monitoring.First,a model and strategy are presented for obtaining mechanical voiceprint signals from circuit breakers.Subsequently,the component separation method was used to decompose the voiceprint signals of multiple faults into individual component signals.Based on this,the recognition of the features of a single-fault voiceprint signal can be achieved.Finally,multiple faults in high-voltage circuit breakers were identified through an experimental simulation and verification of the circuit breaker voiceprint signals collected from the substation site.The research results indicate that the proposed method exhibits excellent performance for multiple mechanical faults,such as spring structures and loose internal components of circuit breakers.In addition,it provides a reference method for the real-time online monitoring of high-voltage circuit breakers.

Fault DiagnosisMethod of Energy Storage Unit of Circuit Breakers Based on EWT-ISSA-BP

Aiming at the problem of energy storage unit failure in the spring operating mechanism of low voltage circuit breakers(LVCBs).A fault diagnosis algorithm based on an improved Sparrow Search Algorithm(ISSA)optimized Backpropagation Neural Network(BPNN)is proposed to improve the operational safety of LVCB.Taking the 1.5kV/4000A/75kA LVCB as an example.According to the current operating characteristics of the energy storage motor,fault characteristics are extracted based on Empirical Wavelet Transform(EWT).Traditional BPNN has problems such as difficulty adjusting network weights and thresholds,being sensitive to initial weights,and quickly falling into local optimal solutions.The Sparrow Search Algorithm(SSA)with self-adjusting weight factors combined with bidirectional mutations is added to optimize the selection of BPNN hyperparameters.The results show that the ISSA-BPNN can accurately and quickly distinguish six conditions of motor voltage reduction:motor voltage increase,motor voltage decrease,energy storage spring stuck,transmission gear stuck,regular state and energy storage spring not locked.It is suitable for fault diagnosis and detection of the energy storage part of LVCB.

Fault Diagnosis of Power Electronic Circuits Based on Adaptive Simulated Annealing Particle Swarm Optimization

In the field of energy conversion,the increasing attention on power electronic equipment is fault detection and diagnosis.A power electronic circuit is an essential part of a power electronic system.The state of its internal components affects the performance of the system.The stability and reliability of an energy system can be improved by studying the fault diagnosis of power electronic circuits.Therefore,an algorithm based on adaptive simulated annealing particle swarm optimization(ASAPSO)was used in the present study to optimize a backpropagation(BP)neural network employed for the online fault diagnosis of a power electronic circuit.We built a circuit simulation model in MATLAB to obtain its DC output voltage.Using Fourier analysis,we extracted fault features.These were normalized as training samples and input to an unoptimized BP neural network and BP neural networks optimized by particle swarm optimization(PSO)and the ASAPSO algorithm.The accuracy of fault diagnosis was compared for the three networks.The simulation results demonstrate that a BP neural network optimized with the ASAPSO algorithm has higher fault diagnosis accuracy,better reliability,and adaptability and can more effectively diagnose and locate faults in power electronic circuits.

Analysis on the fault characteristics of three-phase short-circuit for half-wavelength AC transmission lines

Half-wavelength AC transmission(HWACT) is an ultra-long distance AC transmission technology, whose electrical distance is close to half-wavelength at the system power frequency. It is very important for the construction and operation of HWACT to analyze its fault features and corresponding protection technology. In this paper, the steady-state voltage and current characteristics of the bus bar and fault point and the steady-state overvoltage distribution along the line will be analyzed when a three-phase symmetrical short-circuit fault occurs on an HWACT line. On this basis, the threephase fault characteristics for longer transmission lines are also studied.

fault500 kV变电站35 kV串联电抗器故障分析及建议

某500kV变电站主变35kV侧发生一起电容器组串联电抗器短路故障,通过对事故现场检查,结合故障录波器记录,对本次事故发生的过程进行了分析并得出结论。针对本次故障暴露出的问题,从串联电抗器安装位置、在线监测等方面提出了事故防范措施,对于变电站电容器组安全运行具有一定参考价值。

Waveguide Bragg Grating for Fault Localization in PON

Femtosecond laser direct inscription is a technique especially useful for prototyping purposes due to its distinctive advantages such as high fabrication accuracy,true 3D processing flexibility,and no need for mold or photomask.In this paper,we demonstrate the design and fabrication of a planar lightwave circuit(PLC)power splitter encoded with waveguide Bragg gratings(WBG)using a femtosecond laser inscription technique for passive optical network(PON)fault localization application.Both the reflected wavelengths and intervals of WBGs can be conveniently tuned.In the experiment,we succeeded in directly inscribing WBGs in 1×4 PLC splitter chips with a wavelength interval of about 4 nm and an adjustable reflectivity of up to 70% in the C-band.The proposed method is suitable for the prototyping of a PLC splitter encoded with WBG for PON fault localization applications.

Particle Swarm Optimization-Support Vector Machine Model for Machinery Fault Diagnoses in High-Voltage Circuit Breakers

According to statistic data,machinery faults contribute to largest proportion of High-voltage circuit breaker failures,and traditional maintenance methods exist some disadvantages for that issue.Therefore,based on the wavelet packet decomposition approach and support vector machines,a new diagnosis model is proposed for such fault diagnoses in this study.The vibration eigenvalue extraction is analyzed through wavelet packet decomposition,and a four-layer support vector machine is constituted as a fault classifier.The Gaussian radial basis function is employed as the kernel function for the classifier.The penalty parameter c and kernel parameterδof the support vector machine are vital for the diagnostic accuracy,and these parameters must be carefully predetermined.Thus,a particle swarm optimizationsupport vector machine model is developed in which the optimal parameters c andδfor the support vector machine in each layer are determined by the particle swarm algorithm.The validity of this fault diagnosis model is determined with a real dataset from the operation experiment.Moreover,comparative investigations of fault diagnosis experiments with a normal support vector machine and a particle swarm optimization back-propagation neural network are also implemented.The results indicate that the proposed fault diagnosis model yields better accuracy and e-ciency than these other models.

Feature evaluation and extraction based on neural network in analog circuit fault diagnosis

Choosing the right characteristic parameter is the key to fault diagnosis in analog circuit. The feature evaluation and extraction methods based on neural network are presented. Parameter evaluation of circuit features is realized by training results from neural network; the superior nonlinear mapping capability is competent for extracting fault features which are normalized and compressed subsequently. The complex classification problem on fault pattern recognition in analog circuit is transferred into feature processing stage by feature extraction based on neural network effectively, which improves the diagnosis efficiency. A fault diagnosis illustration validated this method.

Data-Driven Fault Detection of Multiple Open-Circuit Faults for MMC Systems Based on Long Short-Term Memory Networks

This paper presents a long short-term memory(LSTM)-based fault detection method to detect the multiple open-circuit switch faults of modular multilevel converter(MMC)systems with full-bridge sub-modules(FB-SMs).Eighteen sensor signals of grid voltages,grid currents and capacitance voltages of MMC for single and multi-switch faults are collected as sampling data.The output signal characteristics of four types of single switch faults of FB-SM,as well as double switch faults in the same and different phases of MMC,are analyzed under the conditions of load variations and control command changes.A multi-layer LSTM network is devised to deeply extract the fault characteristics of MMC under different faults and operation conditions,and a Softmax layer detects the fault types.Simulation results have confirmed that the proposed LSTM-based method has better detection performance compared with three other methods:K-nearest neighbor(KNN),naive bayes(NB)and recurrent neural network(RNN).In addition,it is highly robust to model uncertainties and Gaussian noise.The validity of the proposed method is further demonstrated by experiment studies conducted on a hardware-in-the-loop(HIL)testing platform.

Wavelet neural network based fault diagnosis in nonlinear analog circuits

The theories of diagnosing nonlinear analog circuits by means of the transient response testing are studled. Wavelet analysis is made to extract the transient response signature of nonlinear circuits and compress the signature dada. The best wavelet function is selected based on the between-category total scatter of signature. The fault dictionary of nonlinear circuits is constructed based on improved back-propagation（BP） neural network. Experimental results demonstrate that the method proposed has high diagnostic sensitivity and fast fault identification and deducibility.

A Neural-based L1-Norm Optimization Approach for Fault Diagnosis of Nonlinear Resistive Circuits

This paper deals with fault isolation in nonlinear analog circuits with tolerance under an insufficient number of independent voltage measurements.A neural network-based L1-norm optimization approach is proposed and utilized in locating the most likely faulty elements in nonlinear circuits.The validity of the proposed method is verified by both extensive computer simulations and practical examples.One simulation example is presented in the paper.

Testing Cross-Talk Induced Delay Faults in Digital Circuit Based on Transient Current Analysis

The delay fault induced by cross-talk effect is one of the difficult problems in the fault diagnosis of digital circuit. An intelligent fault diagnosis based on IDDT testing and support vector machines （SVM） classifier was proposed in this paper. Firstly, the fault model induced by cross-talk effect and the IDDT testing method were analyzed, and then a delay fault localization method based on SVM was presented. The fault features of the sampled signals were extracted by wavelet packet decomposition and served as input parameters of SVM classifier to classify the different fault types. The simulation results illustrate that the method presented is accurate and effective, reaches a high diagnosis rate above 95%.

A fault warning for inter-turn short circuit of excitation winding of synchronous generator based on GRU-CNN

Synchronous generators are important components of power systems and are necessary to maintain its normal and stable operation.To perform the fault diagnosis of mild inter-turn short circuit in the excitation winding of a synchronous generator,a gate recurrent unit-convolutional neural network(GRU-CNN)model whose structural parameters were determined by improved particle swarm optimization(IPSO)is proposed.The outputs of the model are the excitation current and reactive power.The total offset distance,which is the fusion of the offset distance of the excitation current and offset distance of the reactive power,was selected as the fault judgment criterion.The fusion weights of the excitation current and reactive power were determined using the anti-entropy weighting method.The fault-warning threshold and fault-warning ratio were set according to the normal total offset distance,and the fault warning time was set according to the actual situation.The fault-warning time and fault-warning ratio were used to avoid misdiagnosis.The proposed method was verified experimentally.

Particle swarm optimization based RVM classifier for non-linear circuit fault diagnosis

A relevance vector machine (RVM) based fault diagnosis method was presented for non-linear circuits. In order to simplify RVM classifier, parameters selection based on particle swarm optimization (PSO) and preprocessing technique based on the kurtosis and entropy of signals were used. Firstly, sinusoidal inputs with different frequencies were applied to the circuit under test (CUT). Then, the resulting frequency responses were sampled to generate features. The frequency response was sampled to compute its kurtosis and entropy, which can show the information capacity of signal. By analyzing the output signals, the proposed method can detect and identify faulty components in circuits. The results indicate that the fault classes can be classified correctly for at least 99% of the test data in example circuit. And the proposed method can diagnose hard and soft faults.

Fault diagnosis method for switch control circuit based on SVM-AdaBoost

In order to realize the fault diagnosis of the control circuit of all-electronic computer interlocking system(ACIS)for railway signals,taking a five-wire switch electronic control module as an research object,we propose a method of selecting the sample set of the basic classifier by roulette method and realizing fault diagnosis by using SVM-AdaBoost.The experimental results show that the proportion of basic classifier samples affects classification accuracy,which reaches the highest when the proportion is 85%.When selecting the sample set of basic classifier by roulette method,the fault diagnosis accuracy is generally higher than that of the maximum weight priority method.When the optimal proportion 85%is taken,the accuracy is highest up to 96.3%.More importantly,this way can better adapt to the critical data and improve the anti-interference ability of the algorithm,and therefore it provides a basis for fault diagnosis of ACIS.

Data-driven fault diagnosis method for analog circuits based on robust competitive agglomeration

The data-driven fault diagnosis methods can improve the reliability of analog circuits by using the data generated from it. The data have some characteristics, such as randomness and incompleteness, which lead to the diagnostic results being sensitive to the specific values and random noise. This paper presents a data-driven fault diagnosis method for analog circuits based on the robust competitive agglomeration （RCA）, which can alleviate the incompleteness of the data by clustering with the competing process. And the robustness of the diagnostic results is enhanced by using the approach of robust statistics in RCA. A series of experiments are provided to demonstrate that RCA can classify the incomplete data with a high accuracy. The experimental results show that RCA is robust for the data needed to be classified as well as the parameters needed to be adjusted. The effectiveness of RCA in practical use is demonstrated by two analog circuits.

Analog circuit intelligent fault diagnosis based on GKPCA and multi-class SVM approach

Analog circuits fault diagnosis is essential for guaranteeing the reliability and maintainability of electronic systems. In this paper, a novel analog circuit fault diagnosis approach is proposed based on greedy kernel principal component analysis (KPCA) and one-against-all support vector machine (OAASVM). In order to obtain a successful SVM-based fault classifier, eliminating noise and extracting fault features are very important. Due to the better performance of nonlinear fault features extraction and noise elimination as compared with PCA, KPCA is adopted in the proposed approach. However, when we adopt KPCA to extract fault features of analog circuit, a drawback of KPCA is that the storage required for the kernel matrix grows quadratically, and the computational cost for eigenvector of the kernel matrix grows linearly with the number of training samples. Therefore, GKPCA, which can approximate KPCA with small representation error, is introduced to enhance computational efficiency. Based on the statistical learning theory and the empirical risk minimization principle, SVM has advantages of better classification accuracy and generalization performance. The extracted fault features are then used as the inputs of OAASVM to solve fault diagnosis problem. The effectiveness of the proposed approach is verified by the experimental results.

FAULT DETECTION FOR MULTIPLE-VALUED LOGIC CIRCUITS WITH FANOUT-FREE

The single fault and multiple fault detections for multiple-valued logic circuits are studied in this paper. Firstly, it is shown that the cardinality of optimal single fault test set for fanout-free m-valued circuits with n primary inputs is not more than n + 1, for linear tree circuits is two, and for multiplication modulo circuits is two if n is an odd number or if n is an even number and m ＞ 3, where the optimal test set of a circuit has minimal number of test vectors. Secondly,it is indicated that the cardinality of optimal multiple fault test set for linear tree circuits with n primary inputs is 1 + [n/(m - 1)], for multiplication modulo circuits is n+ 1, for fanout-free circuits that consist of 2-input linear tree circuits and 2-input multiplication modulo circuits is not greater than n+ 1, where [x] denotes the smallest integer greater than or equal to x. Finally,the single fault location approaches of linear tree circuits and multiplication modulo circuits are presented, and all faults in the two types of circuits can be located by using a test set with n + 1 vectors.

Improved RBF network application in analog circuit fault isolation

One kind of steepest descent incremental projection learning algorithm for improving the training of radial basis function(RBF)neural network is proposed,which is applied to analog circuit fault isolation.This algorithm simplified the structure of network through optimum output layer coefficient with incremental projection learning(IPL)algorithm,and adjusted the parameters of the neural activation function to control the network scale and improve the network approximation ability.Compared to the traditional algorithm,the improved algorithm has quicker convergence rate and higher isolation precision.Simulation results show that this improved RBF network has much better performance,which can be used in analog circuit fault isolation field.

Fault diagnosis method of track circuit based on KPCA-SAE

At present,ZPW-2000 track circuit fault diagnosis is artificially analyzed and monitored.Its discrimination method not only is low efficient and takes a long period,but also requires highly experienced personnel to analyze the data.Therefore,we introduce kernel principal component analysis and stacked auto-encoder network(KPCA-SAD)into the fault diagnosis of ZPW-2000 track circuit.According to the working principle and fault characteristics of track circuit,a fault diagnosis model of KPCA-SAE network is established.The relevant parameters of key components recorded in the data collected by field staff are used as the fault feature parameters.The KPCA method is used to reduce the dimension and noise of fault document matrix to avoid information redundancy.The SAE network is trained by the processed fault data.The model parameters are optimized overall by using back propagation(BP)algorithm.The KPCA-SAE model is simulated in Matlab platform and is finally proved to be effective and feasible.Compared with the traditional method of artificially analyzing fault data and other intelligent algorithms,the KPCA-SAE based classifier has higher fault identification accuracy.