The cotton direct seeding after wheat(rape) harvested is under trial and would be the future direction at the Yangtze River Valley region of China.The objective of this study was to quantify the effects of branch and ...The cotton direct seeding after wheat(rape) harvested is under trial and would be the future direction at the Yangtze River Valley region of China.The objective of this study was to quantify the effects of branch and stem architecture on cotton yield and identify the optimal cotton architecture to compensate the yield loss due to the reduction of individual production capacity under high planting density in the direst seeding after wheat harvested cropping system.The characteristics of the stem and branch architecture and the relationships between architecture of the stem and branch with yield formation were studied on eight short season cotton cultivars during 2015 and 2016 cotton growth seasons.Based on the two years results,three cultivars with different architectures of stem and branch were selected to investigate the effect of mepiquat chloride(MC) application on the architecture of the stem and branch,boll retention,and the yield in 2017.Significant differences were observed on plant height,all fruiting nodes to branches ratio(NBR) in the cotton plant,and the curvature of the fruiting branch(CFB) among the studied cultivars.There were three types of stem and fruiting branch structures: Zhong425 with stable and suitable plant height and NBR(about 90 cm and 2.5,respectively),high CFB(more than 10.0),and high boll retention speed and seed cotton yield;Siyang 822 with excessive plant height and NBR,low CFB,and low boll retention speed and seed cotton yield;and other studied cultivars with unstable structure of stem and branch,boll retention speed,and seed cotton yield across years.And MC application could promote the appropriate plant height and NBR and high CFB and thus resulted in high boll retention speed and the yield.The results suggested that the suitable plant height and NBR(about 90 cm and 2.5 respectively),and high CFB(more than 10.0),which was related to both genotype and cultural practice,could promote the higher boll retention speed and seed cotton yield.展开更多
Background： With the rapid development of genomics, many functional genes have been targeted. Molecular marker assisted selection can accelerate the breeding process by linking selection to functional genes. Methods...Background： With the rapid development of genomics, many functional genes have been targeted. Molecular marker assisted selection can accelerate the breeding process by linking selection to functional genes. Methods： In a study of upland cotton （Gossypium hirsutum L.）, the F2 segregated population was constructed by crossing X1570 （short branches） with Ekangmian 13 （long branches） to identify the short fruiting branch gene and marker assisted selection with SNP（Single Nucleotide Polymorphisms, SNP） linked to its trait. Result： The result demonstrated that linked SSR marker BNL3232 was screened by BSA（Bulked segregant analysis, BSA） method; one SNP locus was found, which was totally separated from the fruiting branches trait in upland cotton. Conclusion： It was verified that this SNP marker could be used for molecular assisted selection of cotton architecture展开更多
Short chain branching has been characterized using thermal fractionation, a stepwise isothermal crystallizationtechnique, followed by a melting analysis scan using differential scanning calorimetry. Short chain branch...Short chain branching has been characterized using thermal fractionation, a stepwise isothermal crystallizationtechnique, followed by a melting analysis scan using differential scanning calorimetry. Short chain branching distributionwas also characterized by a continuous slow cooling crystallization, followed by a melting analysis scan. Four differentpolyethylenes were studied: Ziegler-Natta gas phase, Ziegler-Natta solution, metallocene, constrained-geometry single sitecatalyzed polyethylenes. The branching distribution was calculated from a calibration of branch content with meltingtemperature. The lamellar thickness was calculated based on the thermodynamic melting temperature of each polyethyleneand the surface free energy of the crystal face. The branching distribution and lamellar thickness distribution were used tocalculate weight average branch content, mean lamellar thickness, and a branch dispersity index. The results for the branchcontent were in good agreement with the known comonomer content of the polyethylenes. A limitation was that high branchcontent polyethylenes did not reach their potential crystallization at ambient temperatures. Cooling to sub-ambient wasnecessary to equilibrate the crystallization, but melting temperature versus branch content was not applicable after cooling tobelow ambient because the calibration data were not performed in this way.展开更多
The main purpose of this research effort was to investigate and reduce the volume of thermal polluted cooling water from returning to the Kafr-Al-Batek power station. Traditional cooling systems, such as cooling tower...The main purpose of this research effort was to investigate and reduce the volume of thermal polluted cooling water from returning to the Kafr-Al-Batek power station. Traditional cooling systems, such as cooling towers or ponds can be very challenging with regards to implementation in developing countries;mainly due to the lack of financial capacity. This research focused on low-cost simulation solutions that could improve thermal outcomes. Comparisons were performed between three different scenarios to decrease the elevated temperature of the discharged water (43 °C) released by the Kafr-Al-Batek power station on the Damietta branch. The different scenarios were simulated by using Star CCM+ software. The base scenario examined the discharge angle of an existing outlet. The second scenario examined a new outlet downstream from the existing outlet. The third scenario increased the width of the existing outlet in order to reduce flow velocity. A comparative analysis is provided between the aforementioned solutions to identify the most suitable and cost-effective alternative. Simulation results show that changing the discharge angle from 90° to 135° is the most effective solution. Applying this solution has the potential to decrease the water temperature at the inlet by 7 degrees Celsius (from 32 °C to 25 °C).展开更多
基金funded by the National Key Research and Development Program of China(2018YFD0100400 and 2017YFD0201300)the Engineering Science and Technology Innovation Fund of Chinese Academy of Agricultural Sciences(2016PCTS-1)+1 种基金the National Natural Science Foundation of China(31671613)the Priority Academic Program Development of Jiangsu Higher Education Institutions,China(PAPD)
文摘The cotton direct seeding after wheat(rape) harvested is under trial and would be the future direction at the Yangtze River Valley region of China.The objective of this study was to quantify the effects of branch and stem architecture on cotton yield and identify the optimal cotton architecture to compensate the yield loss due to the reduction of individual production capacity under high planting density in the direst seeding after wheat harvested cropping system.The characteristics of the stem and branch architecture and the relationships between architecture of the stem and branch with yield formation were studied on eight short season cotton cultivars during 2015 and 2016 cotton growth seasons.Based on the two years results,three cultivars with different architectures of stem and branch were selected to investigate the effect of mepiquat chloride(MC) application on the architecture of the stem and branch,boll retention,and the yield in 2017.Significant differences were observed on plant height,all fruiting nodes to branches ratio(NBR) in the cotton plant,and the curvature of the fruiting branch(CFB) among the studied cultivars.There were three types of stem and fruiting branch structures: Zhong425 with stable and suitable plant height and NBR(about 90 cm and 2.5,respectively),high CFB(more than 10.0),and high boll retention speed and seed cotton yield;Siyang 822 with excessive plant height and NBR,low CFB,and low boll retention speed and seed cotton yield;and other studied cultivars with unstable structure of stem and branch,boll retention speed,and seed cotton yield across years.And MC application could promote the appropriate plant height and NBR and high CFB and thus resulted in high boll retention speed and the yield.The results suggested that the suitable plant height and NBR(about 90 cm and 2.5 respectively),and high CFB(more than 10.0),which was related to both genotype and cultural practice,could promote the higher boll retention speed and seed cotton yield.
基金Sponsored by State Key Laboratory of Cotton Biology Open Fund(CB2016A07)Hubei Provincial Agricultural Science and Technology Innovation Center Support Project(2016–620–000-001-010)The National Key Technology R&D Program(2014BAD11B0203)
文摘Background： With the rapid development of genomics, many functional genes have been targeted. Molecular marker assisted selection can accelerate the breeding process by linking selection to functional genes. Methods： In a study of upland cotton （Gossypium hirsutum L.）, the F2 segregated population was constructed by crossing X1570 （short branches） with Ekangmian 13 （long branches） to identify the short fruiting branch gene and marker assisted selection with SNP（Single Nucleotide Polymorphisms, SNP） linked to its trait. Result： The result demonstrated that linked SSR marker BNL3232 was screened by BSA（Bulked segregant analysis, BSA） method; one SNP locus was found, which was totally separated from the fruiting branches trait in upland cotton. Conclusion： It was verified that this SNP marker could be used for molecular assisted selection of cotton architecture
文摘Short chain branching has been characterized using thermal fractionation, a stepwise isothermal crystallizationtechnique, followed by a melting analysis scan using differential scanning calorimetry. Short chain branching distributionwas also characterized by a continuous slow cooling crystallization, followed by a melting analysis scan. Four differentpolyethylenes were studied: Ziegler-Natta gas phase, Ziegler-Natta solution, metallocene, constrained-geometry single sitecatalyzed polyethylenes. The branching distribution was calculated from a calibration of branch content with meltingtemperature. The lamellar thickness was calculated based on the thermodynamic melting temperature of each polyethyleneand the surface free energy of the crystal face. The branching distribution and lamellar thickness distribution were used tocalculate weight average branch content, mean lamellar thickness, and a branch dispersity index. The results for the branchcontent were in good agreement with the known comonomer content of the polyethylenes. A limitation was that high branchcontent polyethylenes did not reach their potential crystallization at ambient temperatures. Cooling to sub-ambient wasnecessary to equilibrate the crystallization, but melting temperature versus branch content was not applicable after cooling tobelow ambient because the calibration data were not performed in this way.
文摘The main purpose of this research effort was to investigate and reduce the volume of thermal polluted cooling water from returning to the Kafr-Al-Batek power station. Traditional cooling systems, such as cooling towers or ponds can be very challenging with regards to implementation in developing countries;mainly due to the lack of financial capacity. This research focused on low-cost simulation solutions that could improve thermal outcomes. Comparisons were performed between three different scenarios to decrease the elevated temperature of the discharged water (43 °C) released by the Kafr-Al-Batek power station on the Damietta branch. The different scenarios were simulated by using Star CCM+ software. The base scenario examined the discharge angle of an existing outlet. The second scenario examined a new outlet downstream from the existing outlet. The third scenario increased the width of the existing outlet in order to reduce flow velocity. A comparative analysis is provided between the aforementioned solutions to identify the most suitable and cost-effective alternative. Simulation results show that changing the discharge angle from 90° to 135° is the most effective solution. Applying this solution has the potential to decrease the water temperature at the inlet by 7 degrees Celsius (from 32 °C to 25 °C).
