Performance of pulsed plasma thruster at low discharge energy

As the size of satellites scales down, low-power and compact propulsion systems such as the pulsed plasma thruster(PPT) are needed for stabilizing these miniature satellites in orbit. Most PPT systems are operated at 2 J or more of discharge energy. In this work, the performance of a PPT with a side-fed, tongue-flared electrode configuration operated within a lower discharge energy range of 0.5-2.5 J has been investigated. Ablation and charring of the polytetrafluoroethylene propellant surface were analyzed through field-effect scanning electron microscopy imaging and energy-dispersive X-ray spectroscopy. When the discharge energy fell below 2 J, inconsistencies occurred in the specific impulse and the thrust efficiency due to the measurement of the low mass bit. At energy ≥2 J, the performance parameters are compared with other PPT systems of similar configuration and discussed in depth.

Simulation of the spatio-temporal evolution of the electron energy distribution function in a pulsed hollow-cathode discharge

This article presents the 2D simulation results of a nanosecond pulsed hollow cathode discharge obtained through a combination of fluid and kinetic models.The spatio-temporal evolution of the electron energy distribution function(EEDF)of the plasma column and electrical characteristics of the nanosecond pulsed hollow cathode discharge at a gas pressure of 5 Torr are studied.The results show that the discharge development starts with the formation of an ionization front at the anode surface.The ionization front splits into two parts in the cathode cavity while propagating along its lateral surfaces.The ionization front formation leads to an increase in the fast isotropic EEDF component at its front,as well as in the anisotropic EEDF component.The accelerated electrons enter the cathode cavity,which significantly contributes to the formation of the highenergy EEDF component and EEDF anisotropy.

Relative energy zero ratio-based approach for identifying pulse-like ground motions

Pulse-like ground motions are capable of inflicting significant damage to structures. Efficient classification of pulse-like ground motion is of great importance when performing the seismic assessment in near-fault regions. In this study, a new method for identifying the velocity pulses is proposed, based on different trends of two parameters: the short-time energy and the short-time zero crossing rate of a ground motion record. A new pulse indicator, the relative energy zero ratio(REZR), is defined to qualitatively identify pulse-like features. The threshold for pulse-like ground motions is derived and compared with two other identification methods through statistical analysis. The proposed procedure not only shows good accuracy and efficiency when identifying pulse-like ground motions but also exhibits good performance for classifying records with high-frequency noise and discontinuous pulses. The REZR method does not require a waveform formula to express and fit the potential velocity pulses;it is a purely signal-based classification method. Finally, the proposed procedure is used to evaluate the contribution of pulse-like motions to the total input energy of a seismic record, which dramatically increases the seismic damage potential.

Self-sustained Oscillation Pulsed Air Blowing System for Energy Saving

Currently, many studies have been made for years on dimensions of pneumatic nozzle, which influence the flow characteristic of blowing system. For the purpose of outputting the same blowing force, the supply pressure could be reduced by decreasing the ratio of length to diameter of nozzle. The friction between high speed air and pipe wall would be reduced if the nozzle is designed to be converging shape comparing with straight shape. But the volume flow and pressure, discussed in these studies, do not describe energy loss of the blowing system directly. Pneumatic power is an innovative principle to estimate pneumatic system’s energy consumption directly. Based on the above principle, a pulse blowing method is put forward for saving energy. A flow experiment is carried out, in which the high speed air flows from the pulse blowing system and continuous blowing system respectively to a plate with grease on top. Supply pressure and the volume of air used for removing the grease are measured to calculate energy consumption. From the experiment result, the pulse blowing system performs to conserve energy comparing with the continuous blowing system. The frequency and duty ratio of pulse flow influence the blowing characteristic. The pulse blowing system performs to be the most efficient at the specified frequency and duty ratio. Then a pneumatic self-oscillated method based on air operated valve is put forward to generate pulse flow. A simulation is made about dynamic modeling the air operated valve and calculating the motion of the valve core and output pressure. The simulation result verifies the system to be able to generate pulse flow, and predicts the key parameters of the frequency and duty ratio measured by experiment well. Finally, on the basis of simplifying and solution of the pulse blowing system’s mathematic model, the relationship between system’s frequency duty ratio and the dimensions of components is simply described with four algebraic equations. The system could be designed with specified frequency and duty ratio according to the four equations. This study provides theoretical basis for designing energy-saving air blowing system.

Efficient combination and enhancement of high-power mid-infrared pulses in plasmas

High-power intense optical sources in the mid-to-long wavelength infrared region are very attractive for a wide range of fields from fundamental research to materials science and biology applications.However,there are still significant challenges in extending long-wavelength infrared pulses into the relativistic regime using conventional optical techniques.Here,based upon a new type of plasma-based optical method,we present an efficient scheme capable of combining several high-power long-wavelength infrared laser pulses into one single,more intense pulse,thus bringing the intensity of the output pulse to the relativistic regime.Such intense infrared pulses will open up new possibilities for strong-field physics and ultrafast applications.Furthermore,this is beneficial to understand the underlying physics and nonlinear processes of modulation,propagation and energy transfer of high-power intense laser pulses in plasmas.

Conceptual design of a 15-TW pulsed-power accelerator for high-energy-densityephysics experiments

We have developed a conceptual design of a 15-TW pulsed-power accelerator based on the linear-transformer-driver(LTD)architecture described by Stygar[W.A.Stygar et al.,Phys.Rev.ST Accel.Beams 18,110401(2015)].The driver will allow multiple,high-energy-density experiments per day in a university environment and,at the same time,will enable both fundamental and integrated experiments that are scalable to larger facilities.In this design,many individual energy storage units(bricks),each composed of two capacitors and one switch,directly drive the target load without additional pulse compression.Ten LTD modules in parallel drive the load.Each module consists of 16 LTD cavities connected in series,where each cavity is powered by 22 bricks connected in parallel.This design stores up to 2.75 MJ and delivers up to 15 TW in 100 ns to the constant-impedance,water-insulated radial transmission lines.The transmission lines in turn deliver a peak current as high as 12.5 MA to the physics load.To maximize its experimental value and flexibility,the accelerator is coupled to a modern,multibeam laser facility(four beams with up to 5 kJ in 10 ns and one beam with up to 2.6 kJ in 100 ps or less)that can provide auxiliary heating of the physics load.The lasers also enable advanced diagnostic techniques such as X-ray Thomson scattering and multiframe and three-dimensional radiography.The coupled accelerator-laser facility will be the first of its kind and be capable of conducting unprecedented high-energy-densityephysics experiments.

Dynamic energy spectrum and energy deposition in solid target by intense pulsed ion beams

A method for analyzing the dynamic energy spectrum of intense pulsed ion beam(IPIB) was proposed.Its influence on beam energy deposition in metal target was studied with IPIB produced by two types of magnetically insulated diodes(MID).The emission of IPIB was described with space charge limitation model,and the dynamic energy spectrum was further analyzed with time-of-flight method.IPIBs generated by pulsed accelerators of BIPPAB-450(active MID) and TEMP-4M(passive MID) were studied.The dynamic energy spectrum was used to deduce the power density distribution of IPIB in the target with Monte Carlo simulation and infrared imaging diagnostics.The effect on the distribution and evolution of thermal field induced by the characteristics of IPIB dynamic energy spectrum was discussed.

Sensitivity study of the SiGe heterojunction bipolar transistor single event effect based on pulsed laser and technology computer-aided design simulation

The single event effect of a silicon–germanium heterojunction bipolar transistor(SiGe HBT) was thoroughly investigated. By considering the worst bias condition, the sensitive area of the proposed device was scanned with a pulsed laser.With variation of the collector bias and pulsed laser incident energy, the single event transient of the SiGe HBT was studied.Moreover, the single event transient produced by laser irradiation at a wavelength of 532 nm was more pronounced than at a wavelength of 1064 nm. Finally, the impact of the equivalent linear energy transfer of the 1064 nm pulsed laser on the single event transient was qualitatively examined by performing technology computer-aided design simulations, and a good consistency between the experimental data and the simulated outcomes was attained.

Application of Wavelet Packet Energy Spectrum to Extract the Feature of the Pulse Signal

The wavelet packet is presented as a new kind of multiscale analysis technique followed by Wavelet analysis. The fundamental and realization arithmetic of the wavelet packet analysis method are described in this paper. A new application approach of the wavelet packed method to extract the feature of the pulse signal from energy distributing angle is expatiated. It is convenient for the microchip to process and judge by using the wavelet packet analysis method to make the pulse signals quantized and analyzed. Kinds of experiments are simulated in the lab, and the experiments prove that it is a convenient and accurate method to extract the feature of the pulse signal based on wavelet packed-energy spectrumanalysis.

Compact intense electron-beam accelerators based on high energy density liquid pulse forming lines

This paper provides a review of the compact intense electron-beam accelerators (IEBAs) based on liquid pulse forming lines (PFLs) that havebeen developed at the National University of Defense Technology (NUDT) in China. The history and roadmap of the compact IEBAs used todrive high-power microwave (HPM) devices at NUDT are reviewed. The properties of both de-ionized water and glycerin as energy storagemedia are presented. Research into the breakdown properties of liquid dielectrics and the desire to maximize energy storage have resulted in theinvention of several coaxial PFLs with different electromagnetic structures, which are detailed in this paper. These high energy density liquidPFLs have been used to increase the performance of IEBA subsystems, based on which the SPARK (Single Pulse Accelerator with spark gaps)and HEART (High Energy-density Accelerator with Repetitive Transformer) series of IEBAs were constructed. This paper also discusses howthese compact IEBAs have been used to drive typical HPM devices and concludes by summarizing the associated achievements and theconclusions that can be drawn from the results.

Effect of air breakdown on microwave pulse energy transmission

The energy transmission of the long microwave pulse for the frequency of 2.45 GHz and 5.8 GHz is studied by using the electron fluid model, where the rate coefficients are deduced from the Boltzmann equation solver named BOLSIG＋. The breakdown thresholds for different air pressures and incident pulse parameters are predicted, which show good agreement with the experimental data. Below the breakdown threshold, the transmitted pulse energy is proportional to the square of the incident electric field amplitude. When the incident electric field amplitude higher than the breakdown threshold increases,the transmitted pulse energy decreases monotonously at a high air pressure, while at a low air pressure it first decreases and then increases. We also compare the pulse energy transmission for the frequency of 2.45 GHz with the case of 5.8 GHz.

Design aspect of a novel L-shaped pulsed column for liquid–liquid extraction applications: Energy consumption and the characteristics velocity concept

This article deals with the evaluation of the consumption of energy for a steady state solvent extraction in a novel L-shaped pulsed sieve-plate column, which is highly required for design and optimization of the periodic flow processes for industrial applications. In this regard, a comprehensive evaluation on the energy consumption in case of a pulsed flow for three different chemical systems is conducted and besides the influence of pulsation intensity, the effect of geometrical parameters including the plate spacing and the plate free area is investigated as well. Moreover, the concept of characteristic velocity models at flooding points is evaluated with respect to the variation of pressure drop along the column at different operational conditions.

A novel nano-grade organosilicon polymer:Improving airtightness of compressed air energy storage in hard rock formations

Enhancing cavern sealing is crucial for improving the efficiency of compressed air energy storage(CAES)in hard rock formations.This study introduced a novel approach using a nano-grade organosilicon polymer(NOSP)as a sealant,coupled with an air seepage evaluation model that incorporates Knudsen diffusion.Moreover,the initial coating application methods were outlined,and the advantages of using NOSP compared to other sealing materials,particularly regarding cost and construction techniques,were also examined and discussed.Experimental results indicated a significant reduction in permeability of rock specimens coated with a 7–10μm thick NOSP layer.Specifically,under a 0.5 MPa pulse pressure,the permeability decreased to less than 1 n D,and under a 4 MPa pulse pressure,it ranged between4.5×10^(-6)–5.5×10^(-6)m D,marking a 75%–80%decrease in granite permeability.The sealing efficacy of NOSP surpasses concrete and is comparable to rubber materials.The optimal viscosity for application lies between 95 and 105 KU,and the coating thickness should ideally range from 7 to 10μm,applied to substrates with less than 3%porosity.This study provides new insights into air transport and sealing mechanisms at the pore level,proposing NOSP as a cost-effective and simplified solution for CAES applications.

DEGRADATION DUE TO ENERGY PULSE IN HIGH-ENERGY ZnO VARISTORS

The degradation phenomena due to the energy pulse in the high-energy ZnO varistors used for deexitation and overvoltage protection of hydroelectric generator are investigated. The energy pulse, obtained by releasing the energy stored in an inductor, can be equivalent to the combination of the DC field components and the energy component. The variations of the characterized voltages, nonlinear coefficients and pre-breakdown V-A characteristics, increase with the number of the applied energy pulse. The asymmetrical variations of the electric properties of the high-energy ZnO varistors after the energy pulse arise from the deformation of the double Schottky barriers due to the ion migration occuring in the depletion layer and in the grain boundary.

A new method for high-energy pulsed Gamma measurement within intense background x-rays

The accelerator-generating 6.13 MeV pulsed Gamma by 19F（p, αγ）160 reaction usually synchronizes with an intense bremsstrahlung x-ray which has a maximum energy of 1 MeV. This paper proposes a new method, named the scattering and absorbing method, to diagnose the 6.13 MeV Gamma. This method includes two parts： the detector and a scatterer placed in front of the detector. The detector converts the Gamma to electrons and then collects the electrons by a scintillator. In order to restrain the interference of the low-energy background, the scintillator collects the electrons at a small angle. The scintillator is wrapped with electro-absorbing material to absorb the low-energy electrons generated by background x-rays. The theoretical sensitivity ratio of 6.13 MeV Gamma to 1 MeV x-rays is greater than 150. The scatterer is a pretreatment tool to scatter some background x-rays away from the radial beam before they enter the detector. By varying the length, the scatterer can reduce the background x-rays to an acceptable level for the detector.

Time-energy properties of an attosecond extreme ultra-violet pulse

The time-energy properties of high-order harmonic generation （HHG） are calculated for a linearly polarized 7- fs laser pulse with different carrier-envelope phases （CEPs）. The quantum trajectory paths that contribute to an as （1 as=10^-18 s） pulse in HHG are identified. The laser-duration dependence and the CEP dependence of HHG energy property are investigated. The study shows that an as extreme ultra-violet （XUV） pulse can be selected from HHG spectrum near cut-off energy with a bandpass optical filter. The theoretical prediction of the pulse duration is proportional to bandwidth. Analysis suggests that a measured narrowband as XUV pulse may consist of instantaneous shorter pulses each dependent on laser pulse duration, intensity, and CEP. These information can be used as references for producing, selecting, improving and manipulating （timing） as pulses.

High energy and long pulse generation with high-birefringence photonic crystal fibre and laser-diode pumped regenerative amplifier

We report on the generation of a high energy and long pulse for pumping optical parametric chirped-pulse amplification （OPCPA） by a high-birefringence photonic crystal fibre （HB-PCF） and a laser-diode-pumped regenerative chirped pulse amplifier. Using the femtosecond pump pulse centred at 815 nm, a 1064 nm soliton pulse is produced in the HB-PCF. After injecting it into an Nd：YAG regenerative amplifier with the glass etalons, a narrow-band amplified pulse with an energy of -4 mJ and a duration of 235 ps is achieved at a repetition rate of 10 Hz, which is suitable for being used as a pump source in the 800 nm OPCPA system.

Effect of water temperature on pulse duration and energy of stimulated Brillouin scattering

The water temperature has a strong effect on the kinematic viscosity, which is inversely proportional to the phonon lifetime and the gain coefficient. The higher the temperature is, the smaller the kinematic viscosity is, and the larger the phonon lifetime is. At a low pump power and a short focal length, we can derive a single-peak stimulated Brillouin scattering （SBS） pulse. The duration of this single-peak SBS pulse depends mainly on the phonon lifetime of water. With the increase of the water temperature, the duration of such a single-peak SBS pulse will become longer, and the SBS energy will become higher for the gain coefficient, which is related to the phonon lifetime. Therefore, varying the medium temperature can lead to the changes of SBS pulse duration and SBS energy.

Phase shift effects of radio-frequency bias on ion energy distribution in continuous wave and pulse modulated inductively coupled plasmas

A retarding field energy analyzer（RFEA） is used to measure the time-averaged ion energy distributions（IEDs） on the substrate in both continuous wave（CW） and synchronous pulse modulated radio-frequency（RF） inductively coupled Ar plasmas（ICPs）.The effects of the phase shift θ between the RF bias voltage and the RF source on the IED is investigated under various discharge conditions.It is found that as θ increases from 0 to π,the IED moves towards the low-energy side,and its energy width becomes narrower.In order to figure out the physical mechanism,the voltage waveforms on the substrate are also measured.The results show that as θ increases from 0 to π,the amplitude of the voltage waveform decreases and,meanwhile,the average sheath potential decreases as well.Specifically,the potential drop in the sheath on the substrate exhibits a maximum value at the same phase（i.e.,θ = 0） and a minimum value at the opposite phase（i.e.,θ = π）.Therefore,when ions traverse across the sheath region above the substrate,they obtain less energies at lower sheath potential drop,leading to lower ion energy.Besides,as θ increases from π to 2π,the IEDs and their energy widths change reversely.

Statistical properties of the photoelectron energy spectrum generated by an intense laser pulse and a continuous X-ray

This study shows that the photoelectron energy spectrum generated by an intense laser pulse in the presence of a continuous X-ray has interesting and useful statistical properties. The total photoionization production is linearly propor- tional to the time duration of the laser pulse and the square of the beam size. The spectral double energy-integration is an intrinsic value of the laser-assisted X-ray photoionization, which linearly depends on the laser intensity and which quantita- tively reflects the strengths of the laser-field modulation and the quantum interference between photoelectrons. The spectral energy width also linearly depends on the laser intensity. These linear relationships suggest new methods for the in-situ measurement of laser intensity and pulse duration with high precision.