Dynamic Model and Performance of Absorption Heat Pump in Shut-down Process

The dynamic model of LiBr absorption heat pump in shut-down process is established. The simulation results show good agreement with the experiments. The dynamic performance of high-pressure generator, low-pressure generator and heat exchanger are analyzed in detail. The proper shut-down mode of the heat pump is presented,which, in consideration of solution parameters, has a great effect on the possibility of crystallization of some components.

On the horizontal distribution of algal-bloom in Chaohu Lake and its formation process

Based on the remote sensing images of algae, the present work analyzes the horizontal distribution characteristics of algal blooms in Chaohu Lake, China, which also reveals the frequency of algal blooms under different wind directions. Further, an unstructured-grid, three-dimensional finite-volume coastal ocean model （FVCOM） is applied to investigate the wind-induced currents and the transport pro- cess to explain the reason why algal blooms occur at the detected places. We first deduce the primary distribution of biomass from overlaid satellite images, and explain the formation mechanism by analyzing the pollution sources, and simulating the flow field and transportation process under prevailing wind over Chaohu Lake. And then, we consider the adjustment action of the wind on the corresponding day and develop a two-time scale approach to describe the whole formation process of algae horizontal distribution in Chaohu Lake. That is, on the longer time scale, i.e., during bloom season, prevailing wind determines the primary distribution of biomass by inducing the characteristic flow field; on the shorter time scale, i.e., on the day when bloom occurs, the wind force adjusts the primary distribution of biomass to form the final distribution of algal bloom.

Modal identification based on Hilbert-Huang Transform of structural response with S VD preprocessing

In recent years, Empirical mode decomposition and Hilbert spectral analysis have been combined to identify system parameters. Singular-Value Decomposition is pro- posed as a signal preprocessing technique of Hilbert-Huang Transform to extract modal parameters for closely spaced modes and low-energy components. The proposed method is applied to a simulated airplane model built in Automatic Dynamic Analysis of Mechanical Systems software. The results demonstrate that the identified modal parameters are in good agreement with the baseline model.

The EVA plastic film for V-process and steel castings by V-process in China

EVA plastic film is the key material for V-process. Through decades of research, special EVA film for V-process has been produced. The film has adequate elongation; its maximum is about 800% in longitudinal direction and 750% in transversal direction. The single width of the film is 2.8 m and the double width is 5.6 m, which is the widest sheet film for V-process in China. Sheets with different thickness ranging from the thickest 0.35 mm to the thinnest 0.08 mm can meet different demands in China. The film can be used not only for V-process of iron castings, but also for the manganese steel railway frog, steel rocking support and side frame castings for train and the steel bridge box for engine truck.

Risk Assessment M ode of Sale-Leaseback——Based on Fuzzy Analytic Hierarchy Process

Sale-leaseback is paid special focus on for its great application in China in recent years.By giving a detailed analysis,an analysis of the features of sale-leaseback and a study of the risks of it are given in this paper.Then a quantitative analysis of commercial real estate sale-leaseback is carried out.The scientific theoretical analysis is provided in this paper for risk assessment in commercial real estate sale-leaseback mode in China.An effective approach is put forward for sale-leaseback project evaluation and prevention of risk.A useful means is given to supervise commerciai real estate sale-leaseback mode for relevant departments and a certain contribution is made to a further sound development of commercial real estate sale-leaseback mode.

The Application of Air-flow to the Technological Process of Chemical Fiber

The air-flow’s states and ways acted on the technological process of chemical fiber are summed up, which includes chip drying, spinning quenching as well as airjet texturing (air texturing, tangling texturing and bulked continuous filament (BCF)),and the effect of air-flow on the process and quality of chemical fiber is studied,and the action of mechanics and heat on the bulked continuous filament are calculated.

Green fuel from coal via Fischer-Tropsch process： scenario of optimal condition of process and modelling

Extracting, transportation and the using from fossil fuels can damage to the hydrosphere, the biosphere and the Earth＇s atmosphere. But humans always need to this valuable substance. The production of oil derivatives by means of forest waste and coal through the Fischer-Tropsch process is an appropriate solution for the cleanliness of all parts of the environment. For the production of favorite products by the synthesis of Fischer-Tropsch, the performance of the catalyst under different operating conditions should be predictable. For this reason, in this paper, eight mathematical models were determined for the selectivity of five products of methane, light hydrocarbons, gasoline, diesel and wax based on three factors of reduction temperature, time on stream, and He/CO ratio inlet gas on iron-based catalyst. The results showed that the reduction temperature factor had the most effective on the selectivity of hydrocarbon products, exception diesel, so that the increase of the reduction temperature led to increase of the selectivity of methane, light hydrocarbons, gasoline and reduce of the degree of selectivity of the wax and vice versa. For the diesel selectivity, factor of the He/CO ratio inlet gas was the most effective than other factors.

An analysis on El Nino processes during 1949-1987

-In this paper, the outset, evolution and intensity of El Nino were analyzed. Different features were found in each El Nino process. The El Nino of 1986 was also analyzed and outlined.

The Evolutionary History of Ore-forming Processes of Metallic Ore Deposits in Northern Guangxi

The northern Guangxi region is an important rare metal, rare earth metal and polymetallic metallogenic province. In the region there exist five metallogenic series and two metallogenic subseries, whose metallogenesis shows features of polycyclic spiral evolution throughout the geological history. As far as various cycles are concerned, mantle-derived ore substances were reduced while crust-derived ore substances increased from early to late timesfin the whole geological evolutionary history, mantle-derived substances decreased gradually while crust-derived ones increased. Meanwhile ore element associations became more and more varied. In terms of space, mineralization migrated from the old basement outwards, i.e. from west to east during the Precambrian, and from north to south during the Phanerozoic, and again from east to west during the Yanshanian.

STUDY OF PREPARATION AND PROPERTY OF YBa_2Cu_3O_(7-δ)-Ag_x COMPOSITE SUPERCONDUCTORS PREPARED BY SOL-GEL PROCESS

YBa2Cu3O7-δ-Agx composite superconductors were prepared by hybrid sintering process using YBa2Cu3O7-δ-Agx ultrafine powder and Ag2O finepower, which were prepared by sol-gel process and precipitation process respectively. The effect of the Ag content on superconducting crictical transition temperature of YBa2Cu3O7-δ-Agx was not evident as long as YBa2Cu3O7-δ-Agx can form continuous network. But Ag can increase superconduction crictical current and density of the composite superconductors. The normal state (i.e. non-superconducting state at room temperature) resistivity shows a percolation threshold at 20%-30% Ag, whereas the superconducting net-work shows a percolationthreshold at 70% -80% Ag.

A Comparative Analysis of the New -3(-n) - 1 Remer Conjecture and a Proof of the 3n + 1 Collatz Conjecture

This scientific paper is a comparative analysis of two mathematical conjectures. The newly proposed -3(-n) - 1 Remer conjecture and how it is related to and a proof of the more well known 3n + 1 Collatz conjecture. An overview of both conjectures and their respective iterative processes will be presented. Showcasing their unique properties and behavior to each other. Through a detailed comparison, we highlight the similarities and differences between these two conjectures and discuss their significance in the field of mathematics. And how they prove each other to be true.

Integrated use of GIS, remote sensing and multi-criteria decision analysis to assess ecological land suitability in multi-functional forestry

The Zagros forests are a treasure of valuable oak forests, but they have been severely degraded from long-term misuse. Geographic information systems （GIS） and multi-criteria decision analysis （MCDA） have been increasingly used to improve the management of vulnerable ecosystems to prevent further degradation and increase the sustainability of land use. This study presents a methodology to assess land suitability using remote sensing （RS） to obtain wall-to-wall data for the calculations, GIS to analyze the data, and MCDA to rank alternative land uses. The criteria and subcriteria affecting the suitability of land for different uses were identified and weighted using an analytic hierarchy process. Variables used as subcriteria were assessed using satellite data and other sources of information such as existing maps and field surveys. Numerical values for the subcriteria were classified, and each class was given a priority rating according to expert judgments. Based on the ratings and weights of the subcriteria, a priority map was created for each land use using the weighted linear combination method. The priority maps for different land uses were overlaid to obtain a preliminary land use map, which often indicated several simultaneous land uses for the same location. The preliminary map was further edited by removing unrealistic, mutually exclusive land-use combinations. The study tested and demonstrated the potential of integrating RS, G1S and MCDA techniques for solving complicated land allocation problems in forested regions using a scientifically sound and practical approach for efficient and sustainable allocation of forestland for different uses.

A Review on GRAPES-TMM Operational Model System at Guangzhou Regional Meteorological Center

This review summarizes the general developments of the operational mesoscale model system based on the Global/Regional Assimilation and Prediction System-Tropical Monsoon Model (GRAPES-TMM) at the Guangzhou Regional Meteorological Center. GRAPES-TMM consists of the Tropical Regional Atmospheric Model System for the South China Sea (TRAMS, a typhoon model with a horizontal resolution of 9 km), the Mesoscale Atmospheric Regional Model System (MARS, 3km) and the fine-scale Rapid Update Cycling (RUC, 1km) forecasting system. The main advances of model dynamical core and physical processes are summarized, including the development of the 3D reference atmosphere scheme, the coupling scheme between dynamics and model physics, the calculation of nonlinear terms by fractional steps, the gravity wave drag scheme induced by sub-grid orography and a simplified model for landsurface scheme. The progress of model applications is reviewed and evaluated. The results show that the updated 9-3-1forecasting system provides an overall improved performance on the weather forecasting in south China, especially for typhoon-genesis and typhoon-track forecasting as well as short-range weather forecasting. Capabilities and limitations as well as the future development of the forecasting system are also discussed.

Calculation of Activity Coefficients for Components in Ti-15-3 Melt

Based on Kohler’s ternary solution model and Miedemaa’s model for calculating the heats of formation-△Hij of binary Systems, the integral equation has ben established for calculating the activity coefficients in ternarysolution. With the equation, the activity coefficients in Ti-15-3 melt have been calculated. The results show that allof components’ activity coefficients are less than 1, in other wolds, compared with ideal solution, all components takeon a negative deviation. At 2000K, the activity coefficients in Ti-15-3 melt are shown as: about 0.9 for Ti, about0.85 for V, about 0. 1 for Al, aboaut 0.5 for Cr and about 0.23 for Sn. me addition of V lowers the activity coefficient of Ti, but raise the ones of Al, Cr and Sn. These results can be directly used to calculate the evaporation loss ofAl, Cr and Sn during the ISM(Induction Skull Melting) process and at the same time estimate the reactivity betweenTi-15-3 melt and refractory during the cast production.

基于负载均衡的CPU-GPU异构计算平台任务调度策略

针对中央处理单元-图形处理单元(central processing unit-graphics processing unit,CPU-GPU)异构计算系统中,CPU和GPU负载不均导致系统性能降低的问题,提出了一种基于队列的混合调度策略.该策略通过探测获得CPU和GPU处理指定任务的计算能力,将计算任务按照探测比例分配给CPU和GPU;将并行任务存入双向队列,以降低调度带来的额外开销.结果表明,使用该策略的基准测试程序系统性能平均提升了28.07%.总体而言,该调度策略能够缩短CPU与GPU完成各自计算任务后的等待时间,有效平衡系统CPU与GPU之间的负载,提升系统性能.

A novel technique for automatic seismic data processing using both integral and local feature of seismograms

A novel technique for automatic seismic data processing using both integral and local feature of seismograms was presented in this paper. Here, the term integral feature of seismograms refers to feature which may depict the shape of the whole seismograms. However, unlike some previous efforts which completely abandon the DIAL approach, i.e., signal detection, phase identifi- cation, association, and event localization, and seek to use envelope cross-correlation to detect seismic events directly, our technique keeps following the DIAL approach, but in addition to detect signals corresponding to individual seismic phases, it also detects continuous wave-trains and explores their feature for phase-type identification and signal association. More concrete ideas about how to define wave-trains and combine them with various detections, as well as how to measure and utilize their feature in the seismic data processing were expatiated in the paper. This approach has been applied to the routine data processing by us for years, and test results for a 16 days＇ period using data from the Xinjiang seismic station network were presented. The automatic processing results have fairly low false and missed event rate simultaneously, showing that the new technique has good application prospects for improvement of the automatic seismic data processing.

Reconstructing the landing trajectory of the CE-3 lunar probe by using images from the landing camera

An accurate determination of the landing trajectory of Chang＇e-3 （CE-3） is significant for verifying orbital control strategy, optimizing orbital planning, accu- rately determining the landing site of CE-3 and analyzing the geological background of the landing site. Due to complexities involved in the landing process, there are some differences between the planned trajectory and the actual trajectory of CE-3. The land- ing camera on CE-3 recorded a sequence of the landing process with a frequency of 10 frames per second. These images recorded by the landing camera and high-resolution images of the lunar surface are utilized to calculate the position of the probe, so as to reconstruct its precise trajectory. This paper proposes using the method of trajectory reconstruction by Single Image Space Resection to make a detailed study of the hov- ering stage at a height of 100 m above the lunar surface. Analysis of the data shows that the closer CE-3 came to the lunar surface, the higher the spatial resolution of im- ages that were acquired became, and the more accurately the horizontal and vertical position of CE-3 could be determined. The horizontal and vertical accuracies were 7.09 m and 4.27 m respectively during the hovering stage at a height of 100.02 m. The reconstructed trajectory can reflect the change in CE-3＇s position during the powered descent process. A slight movement in CE-3 during the hovering stage is also clearly demonstrated. These results will provide a basis for analysis of orbit control strategy, and it will be conducive to adjustment and optimization of orbit control strategy in follow-up missions.

Structural, Optical and Electrical Properties of Li-doped ZnO Thin Films Influenced by Annealing Temperature

Li-doped ZnO thin films had been grown by radio frequency magnetron sputtering and then annealed under various annealing temperatures. The characteristics of ZnO films were examined by XRD, FESEM, Hall measurement and optical transmission spectra. Results showed that p type conduction was observed in Li doped ZnO films annealed at 500-600 ℃ and thep type ZnO films possessed a good crystalline with c-axis orientation, dense surface, and average transmission of about 85% in visible spectral region.

Manifestations of bright points observed in G-band and CaⅡH by Hinode/SOT

An algorithm was developed for identifying and tracking a magnetic bright point, or bright point （BP） for short, observed in both the photosphere （G-band） and chromosphere （Ca II H）, as well as for pairing a photospheric BP （PBP） with its conjugate chromospheric BP （CBP）. Two sets of data observed by Hinode/SOT in the quiet Sun near the disk center were analyzed. About 278 PBP-CBP pairs were identified and tracked. Lifetimes of both the PBPs and CBPs follow an exponential distribution with average lifetimes of 174 s and 163 s, respectively. We found that the differences in appearance time, in disappearance time and in lifetime of the two kinds of BPs all follow Gaussian distributions,which may indicate that the mechanisms of PBP and CBP formation/disintegration are different. However, the lifetimes of PBPs and CBPs are positively correlated with one another, with a correlation coefficient of 0.8. Furthermore, we calculated the horizontal displacement between the PBP and its conjugate CBP, which follows a Gaussian function with an average and standard deviation of （67.7 ± 38.5）km. We also calculated the amplitude of the flux tube shape change which might be caused by MHD waves propagating along the flux tube, and found that it follows an exponential distribution very well.

Ways to Overcome Anxiety in the English Listening Class in College (SUN JING-YU KE SU-FEN)

In my ten-yeat experience of tenching English as major in college , I feel that students experience more difficulties in listening lessons than in other lessons. What, then, prevents students from achieving success in the listening class? I suggest that anxiety is one of the major factors, which interferes with students listening comprehension. And I would agree with writers such as Gardner and Horwitz et al. (1991)that anxiety may impede learner’s ability to perform successfully in all aspects of learning a foreign language. I feet it is particularly significant for listening.