Engineering Strategies for Suppressing the Shuttle Effect in Lithium–Sulfur Batteries

Lithium–sulfur(Li–S)batteries are supposed to be one of the most potential next-generation batteries owing to their high theoretical capacity and low cost.Nevertheless,the shuttle effect of firm multi-step two-electron reaction between sulfur and lithium in liquid electrolyte makes the capacity much smaller than the theoretical value.Many methods were proposed for inhibiting the shuttle effect of polysulfide,improving corresponding redox kinetics and enhancing the integral performance of Li–S batteries.Here,we will comprehensively and systematically summarize the strategies for inhibiting the shuttle effect from all components of Li–S batteries.First,the electrochemical principles/mechanism and origin of the shuttle effect are described in detail.Moreover,the efficient strategies,including boosting the sulfur conversion rate of sulfur,confining sulfur or lithium polysulfides(LPS)within cathode host,confining LPS in the shield layer,and preventing LPS from contacting the anode,will be discussed to suppress the shuttle effect.Then,recent advances in inhibition of shuttle effect in cathode,electrolyte,separator,and anode with the aforementioned strategies have been summarized to direct the further design of efficient materials for Li–S batteries.Finally,we present prospects for inhibition of the LPS shuttle and potential development directions in Li–S batteries.

Tackling the proton limit under industrial electrochemical CO_(2)reduction by a local proton shuttle

Industrial CO_(2)electroreduction has received tremendous attentions for resolution of the current energy and environmental crisis,but its performance is greatly limited by mass transport at high current density.In this work,an ion‐polymer‐modified gas‐diffusion electrode is used to tackle this proton limit.It is found that gas diffusion electrode‐Nafion shows an impressive performance of 75.2%Faradaic efficiency in multicarbon products at an industrial current density of 1.16 A/cm^(2).Significantly,in‐depth electrochemical characterizations combined with in situ Raman have been used to determine the full workflow of protons,and it is found that HCO_(3)^(−)acts as a proton pool near the reaction environment,and HCO_(3)^(−)and H_(3)O^(+)are local proton donors that interact with the proton shuttle−SO_(3)^(−)from Nafion.With rich proton hopping sites that decrease the activation energy,a“Grotthuss”mechanism for proton transport in the above system has been identified rather than the“Vehicle”mechanism with a higher energy barrier.Therefore,this work could be very useful in terms of the achievement of industrial CO_(2)reduction fundamentally and practically.

VSe_(2)/V_(2)C heterocatalyst with built-in electric field for efficient lithium-sulfur batteries:Remedies polysulfide shuttle and conversion kinetics

Lithium sulfur(Li-S)battery is a kind of burgeoning energy storage system with high energy density.However,the electrolyte-soluble intermediate lithium polysulfides(Li PSs)undergo notorious shuttle effect,which seriously hinders the commercialization of Li-S batteries.Herein,a unique VSe_(2)/V_(2)C heterostructure with local built-in electric field was rationally engineered from V_(2)C parent via a facile thermal selenization process.It exquisitely synergizes the strong affinity of V_(2)C with the effective electrocatalytic activity of VSe_(2).More importantly,the local built-in electric field at the heterointerface can sufficiently promote the electron/ion transport ability and eventually boost the conversion kinetics of sulfur species.The Li-S battery equipped with VSe_(2)/V_(2)C-CNTs-PP separator achieved an outstanding initial specific capacity of 1439.1 m A h g^(-1)with a high capacity retention of 73%after 100 cycles at0.1 C.More impressively,a wonderful capacity of 571.6 mA h g^(-1)was effectively maintained after 600cycles at 2 C with a capacity decay rate of 0.07%.Even under a sulfur loading of 4.8 mg cm^(-2),areal capacity still can be up to 5.6 m A h cm^(-2).In-situ Raman tests explicitly illustrate the effectiveness of VSe_(2)/V_(2)C-CNTs modifier in restricting Li PSs shuttle.Combined with density functional theory calculations,the underlying mechanism of VSe_(2)/V_(2)C heterostructure for remedying Li PSs shuttling and conversion kinetics was deciphered.The strategy of constructing VSe_(2)/V_(2)C heterocatalyst in this work proposes a universal protocol to design metal selenide-based separator modifier for Li-S battery.Besides,it opens an efficient avenue for the separator engineering of Li-S batteries.

Point Cloud Based Semantic Segmentation Method for Unmanned Shuttle Bus

The complexity of application scenarios and the enormous volume of point cloud data make it difficult to quickly and effectively segment the scenario only based on the point cloud.In this paper,to address the semantic segmentation for safety driving of unmanned shuttle buses,an accurate and effective point cloud-based semantic segmentation method is proposed for specified scenarios(such as campus).Firstly,we analyze the characteristic of the shuttle bus scenarios and propose to use ROI selection to reduce the total points in computation,and then propose an improved semantic segmentation model based on Cylinder3D,which improves mean Intersection over Union(mIoU)by 1.3%over the original model on SemanticKITTI data;then,a semantic category division method is proposed for road scenario of shuttle bus and practical application requirements,and then we further simplify the model to improve the efficiency without losing the accuracy.Finally,the nuScenes dataset and the real gathered campus scene data are used to validate and analyze the proposed method.The experimental results on the nuScenes dataset and our data demonstrate that the proposed method performs better than other point cloud semantic segmentation methods in terms of application requirements for unmanned shuttle buses.Which has a higher accuracy(82.73%in mIoU)and a higher computational efficiency(inference speed of 90 ms).

Enhancing Li cycling coulombic efficiency while mitigating “shuttle effect” of Li-S battery through sustained release of LiNO_(3)

In practical lithium-sulfur batteries(LSBs),the shuttle effect and Li cycling coulombic efficiency(CE) are strongly affected by the physicochemical properties of solid electrolyte interphase(SEI).LiNO_(3) is widely used as an additive in electrolytes to build a high-quality SEI,but its self-sacrificial nature limits the ability to mitigate the shuttle effect and stabilize Li anode during long-term cycling.To counteract LiNO_(3) consumption during long-term cycling without using a high initial concentration,inspired by sustainedrelease drugs,we encapsulated LiNO_(3) in lithiated Nafion polymer and added an electrolyte co-solvent(1,1,2,2-tetrafluoroethylene 2,2,2-trifluoromethyl ether) with poor LiNO_(3) solubility to construct highquality and durable F-and N-rich SEI.Theoretical calculations,experiments,multiphysics simulations,and in-situ observations confirmed that the F-and N-rich SEI can modulate lithium deposition behavior and allow persistent repair of SEI during prolonged cycling.Hence,the F-and N-rich SEI improves the Li anode cycling CE to 99.63% and alleviates the shuttle effect during long-term cycling.The lithium anode with sustainable F-and N-rich SEI shows a stable Li plating/stripping over 2000 h at 1 mA cm^(-2).As expected,Li‖S full cells with this SEI achieved a long lifespan of 250 cycles,far exceeding cells with a routine SEI.The Li‖S pouch cell based on F-and N-rich SEI also can achieve a high energy density of about300 Wh kg^(-1) at initial cycles.This strategy provides a novel design for high-quality and durable SEls in LSBs and may also be extendable to other alkali metal batteries.

Analyzing Whether a Space Shuttle Can Withstand a Perpendicular Launch from Mars

In the near future, humans will go to Mars. During these interplanetary journeys, astronaut safety will be paramount. This study aims to determine whether the astronauts will be able to launch safely from Mars in a space shuttle taking off perpendicularly. This study used kinematics along with equations for calculating atmospheric density and total force on the spacecraft to evaluate these values for each atmospheric layer. Approximations were made for the spacecraft’s dimensions to find the cross-sectional front-view area of the spacecraft and the drag coefficient where verifiable data was unavailable. Although there is data for the dimensions of the spacecraft’s front view, there isn’t any on its area. The total force was found to be significantly lower than 3Gs which ensures a safe take-off for the astronauts and reduces manufacturing costs for assembling new rockets.

Fault Analysis and Structure Optimization of Traveling Transmission System of Shuttle Car

This paper firstly introduces the common faults of traveling transmission system of shuttle car.Secondly,by analyzing the characteristics of shuttle car structure,the layout of traveling transmission system and the common faults on shuttle car,this paper concludes that"internal holding torque"is the main cause of faults.Finally,this paper proposes a corresponding optimization design scheme to reduce the impact of"internal torque",and calculates the relevant results through the finite element simulation analysis method.Through these analyses and calculations,it is shown that the method can effectively reduce the probability of failure of traveling transmission system of shuttle car.

从“shuttle bus”联想到“__车”的英译

车是现代社会和生活不可或缺的东西。随着社会的发展,科技的进步,车的花样也层出不穷,车名也日新月异。随着对外商务和文化交流日益频繁,对各种车的翻译成了涉外活动中尤其是英语应用者经常接触的内容。本文从剑桥商务英语中出现的shuttle bus英译开始,对车进行粗略的分门别类后并对各种车的翻译作简单的归纳,便于学习者日常记忆和应用。

Controllers Design for the Multi-Shuttle and Multi-Station Transportation System

Nowadays, the Multi-Shuttle and Multi-Station Transportation System (MMTS) is one of the most interesting research topics in many fields of industries. It is an effective solution to reduce unexpected accidents that occur during transportation as well as increase productivity in manufacturing. The aim of this paper is to introduce the controller design for the MMTS which is built in our BK-Recme BioMech Lab at Ho Chi Minh City University of Technology (VNU-HCM), Viet Nam. Based on the design of this system, the control algorithms will be conducted to check the operation of the whole system. To evaluate the feasibility and effectiveness of this model, we design a series of random instances for different quantities of nodes as well as the different quantities of shuttles. Our system includes 4 stations and 6 shuttles which are assembled in the serial chain system. However, the number of stations and number of shuttles can be expanded to any desired ones which are based on the requirement of the industries. In this paper, we mainly focus on the controller design of this system to make it operate in an effective way that the goods will be transported and delivered to the target station as fast as possible. In order to solve the large-scale instances and realistic transport problems, we propose three algorithms for three progresses as shuttles calling, path reading and shuttles communicating. The shuttles calling is to decide which shuttle should be called to the start-node. Path reading to determine the shortest way to go from start-node to end-node. Finally, shuttles communicating, which allow one shuttle to interact with the next shuttles so we have a loop of orders (shuttle 1 to shuttle 2;shuttle 2 to shuttle 3;etc.;shuttle n-1 to shuttle n). This proposes solution can help us to solve the huge numbers of shuttles and stations in the system. The specific result of this study is applying Dijkstra’s algorithm to propose an algorithm that allows handling a transportation system without caring about the number of shuttles as well as the number of stations for the closed-loop path. Several test problems are carried out in order to check the feasibility and the effectiveness of our purposed control algorithm.

Photovoltaic Performance of Triphenylamine Dyes-sensitized Solar Cells Employing Cobalt Redox Shuttle and Influence of π-conjugated Spacers

Developing photosensitizers suitable for the cobalt electrolyte and understanding the structure-property relationship of organic dyes is warranted for the dye-sensitized solar cells （DSSCs）. The DSSCs incorporating tris（1,10-phenanthroline）eobalt（Ⅱ/Ⅲ）-based redox elec- trolyte and four synthesized organic dyes as photosensitizers are described. The photovoltaic performance of these dyes-sensitized solar cells employing the cobalt redox shuttle and the influences of the w-conjugated spacers of organic dyes upon the photovoltage and photocur- rent of mesoscopic titania solar cells are investigated. It is found that organic dyes with thiophene derivates as linkers are suitable for DSSCs employing cobalt electrolytes. DSSCs sensitized with the as-synthesized dyes in combination with the cobalt redox shuttle yield an overall power conversion efficiency of 6.1% under 100 mW/cm2 AM1.5 G illumination.

Cellulose nanofiber separator for suppressing shuttle effect and Li dendrite formation in lithium-sulfur batteries

Lithium-sulfur battery(LSB) has high energy density but is limited by the polysulfides shuttle and dendrite growth during cycling. Herein, a free-standing cellulose nanofiber(CNF) separator is designed and fabricated in isopropanol/water suspension through vacuum filtration progress. CNFs with abundant polar oxygen-containing functional groups can chemically immobilize the polysulfides, and suppress the formation of the dendrites by controlling the surface morphology of the SEI on lithium metal in LSB. The isopropanol content in a suspension can fine-tune the pore structure of the membrane to achieve optimal electrochemical performance. The prepared separator displays integrated advantages of an ultrathin thickness(19 μm), lightweight(0.87 mg cm^(-2)), extremely high porosity(98.05%), and decent electrolyte affinity. As a result, the discharge capacity of the LSB with CNF separator at the first and 100 th cycle is 1.4 and 1.3 times that of PP separator, respectively. Our research provides an environmentalfriendly and facile strategy for the preparation of multifunctional separators for LSBs.

A gelatin-based artificial SEI for lithium deposition regulation and polysulfide shuttle suppression in lithium-sulfur batteries

Lithium-sulfur(Li-S) battery is one of the best candidates for the next-generation energy storage system due to its high theoretical capacity(1675 mA h-1),low cost and environment friendliness.However,lithium(Li) dendrites formation and polysulfide shuttle effect are two major challenges that limit the commercialization of Li-S batteries.Here we design a facile bifunctional interlayer of gelatin-based fibers(GFs),aiming to protect the Li anode surface from the dendrites growth and also hinder the polysulfide shuttle effect.We reveal that the 3D structural network of GFs layer with abundant polar sites helps to homogenize Li-ion flux,leading to uniform Li-ion deposition.Meanwhile,the polar moieties also immobilize the lithium polysulfides and protect the Li metal from the side-reaction.As a result,the anodeprotected batteries have shown significantly enhanced performance.A high coulombic efficiency of 96% after 160 cycles has been achieved in the Li-Cu half cells.The Li-Li symmetric cells exhibit a prolonged lifespan for 800 h with voltage hysteresis(10 mV).With the as-prepared GFs layer,the Li-S battery shows approximately 14% higher capacity retention than the pristine battery at 0.5 C after 100 cycles.Our work presents that this gelatin-based bi-functional interlayer provides a viable strategy for the manufacturing of advanced Li-S batteries.

Laboratory testing of a shuttle car canopy air curtain for respirable coal mine dust control

Canopy air curtain （CAC） technology has been developed by the National Institute for Occupational Safety and Health （NIOSH） for use on continuous miners and subsequently roof bolting machines in underground coal mines to protect operators of these machines from overexposure to respirable coal mine dust. The next logical progression is to develop a CAC for shuttle cars to protect operators from the same overexposures. NIOSH awarded a contract to Marshall University and J.H. Fletcher to develop the shuttle car CAC. NIOSH conducted laboratory testing to determine the dust control efficiency of the shuttle car CAC. Testing was conducted on two different cab configurations： a center drive similar to that on a Joy 10SC32AA cab model and an end drive similar to that on a Joy 10SC32AB cab model. Three different ventilation velocities were tested-0.61, 2.0, 4.3 rrds （120, 400, and 850 fpm）. The lowest, 0.61 m/s （120 fpm）, represented the ventilation velocity encountered during loading by the continuous miner, while the 4.3 m/s （850 fpm） velocity represented ventilation velocity airflow over the shuttle car while tramming against ventilation airflow. Test results showed an average of the dust control efficiencies ranging from 74 to 83% for 0.61 m/s （120 fpm）, 39%-43% for 2.0 m/s （400 fpm）, and 6%-16% for 4.3 m/s （850 fpm）. Incorporating an airflow spoiler to the shuttle car CAC design and placing the CAC so that it is located 22.86 cm （9 in.） forward of the operator improved the dust control efficiency to 51%-55% for 4.3 m/s （850 fpm） with minimal impact on dust control efficiencies for lower ventilation velocities. These laboratory tests demonstrate that the newly developed shuttle car CAC has the potential to successfully protect shuttle car operators from coal mine respirable dust overexposures.

Unraveling Shuttle Effect and Suppression Strategy in Lithium/Sulfur Cells by In Situ/Operando X-ray Absorption Spectroscopic Characterization

The polysulfides shuttle effect represents a great challenge in achieving high capacity and long lifespan of lithium/sulfur(Li/S)cells.A comprehensive understanding of the shuttle-related sulfur speciation and diffusion process is vital for addressing this issue.Herein,we employed in situ/operando X-ray absorption spectroscopy(XAS)to trace the migration of polysulfides across the Li/S cells by precisely monitoring the sulfur chemical speciation at the cathodic electrolyte-separator and electrolyte-anode interfaces,respectively,in a real-time condition.After we adopted a shuttle-suppressing strategy by introducing an electrocatalytic layer of twinborn bismuth sulfide/bismuth oxide nanoclusters in a carbon matrix(BSOC),we found the Li/S cell showed greatly improved sulfur utilization and longer life span.The operando S Kedge XAS results revealed that the BSOC modification was bi-functional:trapping polysulfides and catalyzing conversion of sulfur species simultaneously.We elucidated that the polysulfide trapping-and-catalyzing effect of the BSOC electrocatalytic layer resulted in an effective lithium anode protection.Our results could offer potential stratagem for designing more advanced Li/S cells.

Robust interface layers with redox shuttle reactions suppress the dendrite growth for stable solid-state Li metal batteries

Designing a durable lithium metal anode for solid state batteries requires a controllable and uniform deposition of lithium, and the metal lithium layer should maintain a good interface contact with solid state electrolyte during cycles. In this work, we construct a robust functional interface layer on the modified LiB electrode which considerably improves the electrochemical stability of lithium metal electrode in solid state batteries. It is found that the functional interface layer consisting of polydioxolane, polyiodide ion and Li TFSI effectively restrains the growth of lithium dendrites through the redox shuttle reaction of I-/I3-and maintains a good contact between lithium anode and solid electrolyte during cycles. Benefit from these two advantages, the modified Li-B anode exhibits a remarkable cyclic performance in comparison with those of the bare Li-B anode.

Construction of Shuttle Expression Plasmid and Stable Expression of Foreign Gene in Mycobacteria and E．Coli

By employing the pUC19 as a backbone,the regulatory and signal sequences which encode kanamycin resistance, and mycobacterial plasmid origin of replication (oriM) were cloned into the pUC19. The recombinant E. Coli-mycobacteria shuttle expression plasmid PBCG-8000 was constructed. The PBCG-8000 was able to replicate in both E. Coli and mycobacteria (including BCG) systems, and to confer stable kanamycin resistance upon transformants. The study should facilitate the development of BCG and other mycobacteria into multivalent vaccine vectors.

Storage Assignment Optimization in a Multi-tier Shuttle Warehousing System

The current mathematical models for the storage assignment problem are generally established based on the traveling salesman problem（TSP）,which has been widely applied in the conventional automated storage and retrieval system（AS/RS）.However,the previous mathematical models in conventional AS/RS do not match multi-tier shuttle warehousing systems（MSWS） because the characteristics of parallel retrieval in multiple tiers and progressive vertical movement destroy the foundation of TSP.In this study,a two-stage open queuing network model in which shuttles and a lift are regarded as servers at different stages is proposed to analyze system performance in the terms of shuttle waiting period（SWP） and lift idle period（LIP） during transaction cycle time.A mean arrival time difference matrix for pairwise stock keeping units（SKUs） is presented to determine the mean waiting time and queue length to optimize the storage assignment problem on the basis of SKU correlation.The decomposition method is applied to analyze the interactions among outbound task time,SWP,and LIP.The ant colony clustering algorithm is designed to determine storage partitions using clustering items.In addition,goods are assigned for storage according to the rearranging permutation and the combination of storage partitions in a 2D plane.This combination is derived based on the analysis results of the queuing network model and on three basic principles.The storage assignment method and its entire optimization algorithm method as applied in a MSWS are verified through a practical engineering project conducted in the tobacco industry.The applying results show that the total SWP and LIP can be reduced effectively to improve the utilization rates of all devices and to increase the throughput of the distribution center.

Strategies to suppress the shuttle effect of redox mediators in lithium-oxygen batteries

Rechargeable lithium-oxygen(Li-O_(2))batteries are the next generation energy storage devices due to their ultrahigh theoretical capacity.Redox mediators(RMs)are widely used as a homogenous electrocatalyst in non-aqueous Li-O_(2)batteries to enhance their discharge capacity and reduce charge overpotential.However,the shuttle effect of RMs in the electrolyte solution usually leads to corrosion of the Li metal anode and uneven Li deposition on the anode surface,resulting in unwanted consumption of electrocatalysts and deterioration of the cells.It is therefore necessary to take some measures to prevent the shuttle effect of RMs and fully utilize the soluble electrocatalysts.Herein,we summarize the strategies to suppress the RM shuttle effect reported in recent years,including electrolyte additives,protective separators and electrode modification.The mechanisms of these strategies are analyzed and their corresponding requirements are discussed.The electrochemical properties of Li-O_(2)batteries with different strategies are summarized and compared.The challenges and perspectives on preventing the shuttle effect of RMs are described for future study.This review provides guidance for achieving shuttle-free redox mediation and for designing Li-O_(2)cells with a long cycle life,high energy efficiency and highly reversible electrochemical reactions.

Labyrinth maze-like long travel-reduction of sulfur and polysulfides in micropores of a spherical honeycomb carbon to greatly confine shuttle effects in lithium-sulfur batteries

Polysulfide absorption in a micropore-rich structure has been reported to be capable of efficiently confining the shuttle effect for high-performance lithium-sulfur(Li–S)batteries.Here,a labyrinth maze-like spherical honeycomb-like carbon with micropore-rich structure was synthesized,which is employed as a template host material of sulfur to study the shuttle effects.The results strongly confirm that a diffusion controlled process rather than an absorption resulted surface-controlled process occurs in an even micropore-rich cathode but still greatly inhibits the shuttle effect.Thus,the battery achieves a high initial discharge specific capacity of 1120 mAh g1 at 0.25 C and super cycling stability for 1635 cycles with only 0.035%capacity decay per cycle with 100%Coulombic efficiency.We would like to propose a new mechanism for shuttle effect inhibition in micropores.In terms of the diffusion control process in microporous paths of a labyrinth maze structure,polysulfides experience a long travel to realize continuous reductions of sulfur and polysulfides until formation of the final solid product.This efficiently prevents the polysulfides escaping to electrolyte.The labyrinth maze-like honeycomb structure also offers fast electron transfer and enhanced mass transport as well as robust mechanical strength retaining intact structure for long cycle life.This work sheds lights on new fundamental insights behind the shuttle effects with universal significance while demonstrating prominent merits of a robust labyrinth maze-like structure in high performance cathode for high-performance Li–S batteries.

ANALYSIS OF N-METHYL-N-NITROSOUREA-INDUCED MUTATIONS IN A SHUTTLE VECTOR PLASMID PROPAGATED IN MOUSE O^6-METHYLGUANINE-DNA METHYLTRANSFERASE-DEFICIENT CELLS IN COMPARISON WITH PROFICIENT CELLS.

To investigate a contribution of O-methylguanineto mutagenesis in mouse cells,we constructed ashuttle vector plasmid,pYZ289,from a part ofpZ189 plasmid and polyoma virus DNA.The plasmidcontains a supF gene as a marker of mutation andcan replicate in both E.coli and mouse cells.ThepYZ289 treated with N-methyl-N-nitrosourea (MNU)