Pressure stimulated current in progressive failure process of combined coal-rock under uniaxial compression:Response and mechanism

Effective monitoring of the structural health of combined coal-rock under complex geological conditions by pressure stimulated currents(PSCs)has great potential for the understanding of dynamic disasters in underground engineering.To reveal the effect of this way,the uniaxial compression experiments with PSC monitoring were conducted on three types of coal-rock combination samples with different strength combinations.The mechanism explanation of PSCs are investigated by resistivity test,atomic force microscopy(AFM)and computed tomography(CT)methods,and a PSC flow model based on progressive failure process is proposed.The influence of strength combinations on PSCs in the progressive failure process are emphasized.The results show the PSC responses between rock part,coal part and the two components are different,which are affected by multi-scale fracture characteristics and electrical properties.As the rock strength decreases,the progressive failure process changes obviously with the influence range of interface constraint effect decreasing,resulting in the different responses of PSC strength and direction in different parts to fracture behaviors.The PSC flow model is initially validated by the relationship between the accumulated charges of different parts.The results are expected to provide a new reference and method for mining design and roadway quality assessment.

Optimization and Characterization of Combined Degumming Process of Typha angustata L. Stem Fibers

Plant derived natural fibers have been widely investigated as alternatives to synthetic fibers in reinforcing polymers.Researchers over the years have explored many plant fibers using different extraction processes to study their physical,chemical,and mechanical properties.In this context,the present study relates to the extraction,characterization,and optimization of Typha angustata L.stem fibers.For this purpose,desirability functions and response surface methodology were applied to simultaneously optimize the diameter(D),linear density(LD);yield(Y),lignin fraction(L),and tenacity(T)of Typha stem fibers.Typha stems have been subjected to both alkali(NaOH)and enzymatic(pectinex ultra-SPL)treatments.Three levels of process variables including enzyme concentration(10,15,and 20 ml/L)and treatment duration(10,15,and 20 days)were used to design the experiments according to the factorial design.Experimental results were examined by analysis of variance and fitted to second order polynomial model using multiple regression analysis.The Derringer’s desirability function released that the values of process variables generating optimized diameter,linear density,yield,lignin ratio and tenacity are 20 ml/L and 20 days for concentration of pectinex ultra-SPL enzyme and treatment duration,respectively.Confirmation was performed and high degree of correlation was found between the experimental and statistical values.Moreover,the morphological structure has been investigated by the scanning electron microscope,showing a crenelated structure of ultimate fiber bundles of cellulose composing the Typha fiber.Compared to Typha stem non-treated fibers(TSNTF),Typha stem combined treated fibers(TSCTF),brings to improve mechanical properties.This change in mechanical properties is affected by modifying the fiber structure showing alpha cellulose of(66.86%)and lignin ratio of(10.83%)with a crystallinity index of(58.47%).

Exploration and Practice of Nitrogen Addition Process for LF Refining Ladle Bottom Blowing Nitrogen Steel Liquid

This article discusses and analyzes the law of nitrogen increase in liquid steel and the main factors affect-ing the nitrogen increasing of molten steel,through the way of adding nitrogen to molten steel by bottom blowing nitrogen gas in LF refining process.It is considered that the main factors affecting the nitrogen increasing instability of molten steel are the initial temperature of LF refining,nitrogen relative element,surface active elements[O]and[S]of steel liquid,and bottom blowing rate of ladle.The large-scale production practice shows that T[O]not more than 50×10-6 and[S]is not more than 0.020 in LF refining at the initial temperature of not less than 1570.The liquid steel nitrogen enrichment test is carried out by ladle bottom blowing nitrogen gas after 20 min of refining,the flow rate is set as(6.0~7.0)NL/min per ton,and it is turned to 2 NL/min at 6 min before the end of refining,the nitrogen increasing rate of liquid steel is basically stable at(5~6)×10-6 per minute.

Metallurgical Reaction Characteristic for the Combined Blowing Process of Top-Bottom Blown Oxygen and Bottom Blown Natural Gas

The experiment was carried out in a combined blowing converter.The natural gas was supplied as the cooling medium for the bottom lance.The blow- ing practice of medium P hot metal (0.30-0.85% [P]) indicated that with better stirring at the bottom of the converter and lower P_(CO),this steelmgking process was favorable to reduce the amount of [C] and [O] and increase the (P_2O_5)/[P]. The maximum rate of dephospborization might be high up to 0.0a5%/min and the P content in steel could be reduced to lower than 0.03% by single slag-forming operation.

VOLUMETRIC MASS TRANSFER COEFFICIENT BETWEEN SLAG AND METAL IN COMBINED BLOWING CONVERTER

The effects of operation parameters of combined blowing converter on the volumetric mass transfer coefficient between slag and steel are studied with a cold model with water simulating steel, oil simulating slag and benzoic acid as the transferred substance between water and oil. The results show that, with lance level of 2.1m and the top blowing rate of 25000Nm3/h, the volumetric mass transfer coefficient changes most significantly when the bottom blowing rate ranges from 384 to 540Nm3/h. The volumetric mass transfer coefficient reaches its maximum when the lance level is 2.1m, the top blowing rates is 30000Nm3/h, and the bottom blowing rate is 384Nm3/h with tuyeres located symmetrically at 0.66D of the converter bottom.

Pollutants removal and simulation model of combined membrane process for wastewater treatment and reuse in submarine cabin for long voyage

A laboratory scale test was conducted in a combined membrane process （CMP） with a capacity of 2.91 m3/d for 240 d to treat the mixed wastewater of humidity condensate, hygiene wastewater and urine in submarine cabin during prolonged voyage. Removal performance of chemical oxygen demand （COD）, ammonia nitrogen （NH4^＋-N）, turbidity and anionic surfactants （LAS） was investigated under different conditions. It was observed that the effluent COD, NH4^＋-N, turbidity and LAS flocculated in ranges of 0.19-0.85 mg/L, 0.03-0.18 mg/L, 0.0-0.15 NTU and 0.0-0.05 mg/L, respectively in spite of considerable fluctuation in corresponding influent of 2120-5350 mg/L, 79.5-129.3 mg/L, 110-181.1NTU and 4.9-5.4 mg/L. The effluent quality of the CMP could meet the requirements of mechanical water and hygiene water according to the class I water quality standards in China （GB3838-2002）. The removal rates of COD, NH4^＋-N, turbidity and LAS removed in the MBR were more than 90%, which indicated that biodegradation is indispensable and plays a major role in the wastewater treatment and reuse. A model, built on the back propagation neural network （BPNN） theory, was developed for the simulation of CMP and produced high reliability. The average error of COD and NH4^＋-N was 5.14% and 6.20%, respectively, and the root mean squared error of turbidity and LAS was 2.76% and 1.41%, respectively. The results indicated that the model well fitted the laboratory data, and was able to simulate the removal of COD, NH4^＋-N, turbidity and LAS. It also suggested that the model proposed could reflect and manage the operation of CMP for the treatment of the mixed wastewaters in submarine.

Multi-output Gaussian Process Regression Model with Combined Kernel Function for Polyester Esterification Processes

In polyester fiber industrial processes,the prediction of key performance indicators is vital for product quality.The esterification process is an indispensable step in the polyester polymerization process.It has the characteristics of strong coupling,nonlinearity and complex mechanism.To solve these problems,we put forward a multi-output Gaussian process regression(MGPR)model based on the combined kernel function for the polyester esterification process.Since the seasonal and trend decomposition using loess(STL)can extract the periodic and trend characteristics of time series,a combined kernel function based on the STL and the kernel function analysis is constructed for the MGPR.The effectiveness of the proposed model is verified by the actual polyester esterification process data collected from fiber production.

Current situation and consideration of small splint in the treatment of distal radius fracture complicated with ulnar styloid process fracture

Objective:The incidence of distal radius fracture combined with ulnar styloid process fracture is increasing,which seriously affects the quality of life of patients.Small splint therapy of Traditional Chinese Medicine is a reliable method for the treatment of such fractures.It not only has good clinical efficacy,but also has fewer complications and high safety.However,the traditional small splint fixation does not cover the styloid process of the ulna,and the fracture of the styloid process of the ulna is closely related to the stability of the wrist joint,which has an important impact on the prognosis of the fracture.Based on this,we believe that the ulnar elongation splint can better improve the wrist function,and further prospects for related issues,in order to guide clinical practice.

基于正交试验设计-组合赋权TOPSIS法的菟丝子酒炙工艺优化

目的:优选菟丝子酒炙炮制工艺,为规范酒菟丝子炮制工艺提供参考。方法:基于L9(34)正交试验设计,以饮片外观性状、金丝桃苷含量、总黄酮含量、醇溶性浸出物含量为指标,以加酒量(A)、闷润时间(B)、炒制温度(C)、炒制时间(D)为考察因素,采用层次分析法(AHP)结合熵权法的组合赋权方式计算综合评分,利用逼近理想解排序(TOPSIS)模型筛选出酒菟丝子炮制的最佳工艺参数并进行工艺验证。结果:筛选出最优炮制工艺为生药材加10%黄酒,闷润6 h,炒炙温度为300℃,炒炙10 min。结论:运用正交试验设计-组合赋权TOPSIS法优选菟丝子酒炙工艺,结果简便、准确、可行。

基于TOPSIS法工艺参数决策的磨削质量综合评判

针对机床加工工艺方案评选中存在多种影响因素问题,以表面粗糙度、磨削力和噪声因素为决策指标,建立了机械加工工艺方案的组合评价模型。在分析机床加工工艺模型的基础上,给出了综合运用距离法计算不同工艺参数贴近度的评估方案。各评价方法获得的排序结果基本接近。三种距离对工艺参数都具有较高的评价。该研究有助于提高磨削加工节能效果,为后续的工艺优化奠定一定的基础。

Full scale application of combined SBF-AS process for municipal wastewater treatment in small towns and cities in China

The combined submerged biofilm （ SBF）-activated sludge （AS） process for treatment of municipal wastewater in a small city in China is described in this paper. The process exhibited high removal efficiencies for carbonaceous substances, nitrogen and phosphorus which mainly took place in the combined SBF-AS biore- actor. The SBF-AS bioreactor was divided into pre-anoxic, anaerobic, anoxic and aerobic zones from inlet to outlet, in which fixed biofilm carriers were packed. Excellent performance had been obtained under normal operating conditions in more than one year of operation in Dong＇ e municipal WWTP, Shandong province, with mean removal efficiencies of BOD5 93.4%, COD 88%, SS 92%, NH4 - N 82. 1%, TP 75% and TN 66.7%, and quite high effluent quality such as BOD5 6 to 10 rag/L, COD 20 to 40 rag/L, SS 5 to 10 rag/L, TN 10 to 20 rag/L, NH4 - N 4 to 8 mg/L and TP 0. 6 to 1.0 mg/L. The effluent was reused multi-purposely, such as toilet flushing, green belt watering and artificial lake pounding. Simultaneous nitrification and denitrification took place due to the DO gradient in biofilm in aerobic zone of the SBF-AS bioreactor, which made TN removal efficiency improved remarkably in system. Some activated sludge was returned from final clarifiers to the bioreactor for phosphorus removal. The process had the advantages of low investment and low operational/ maintenance （O/M） costs, low sludge yield and was preferably employed in small towns and cities.

Methodological Framework for a Multi-Scale Study on Hydrological Processes and Soil Erosion in Subtropical Southeast China

This paper introduces and illustrates the concepts of geoecological process combinations and geographical or landscape dimensions by outlining the methodology of a Sino-German cooperative project in Southeast China and presents the first results of the modelling process for the catchment scale. The project equipped a catchment in subtropical Southeast China from plot scale to catchment scale in order to study the hydrological and soll erosion processes. Distinct spatial differences in principal water and soil material fluxes were quantified. Deep drainage peaks occurred in May, June and July and even in August and November. Measurements in erosion plots as well as sedimentary deposits revealed that there was soil erosion connected with overland flow. Consistent with the results from the regular catenary variations of soil colors, textural stratification and hydrograph analysis, there was also a clear indication of interflow from measured soil moisture data. The experimental set up has the potential to further deepen the understanding of small-scale processes involved in lateral water fluxes and soil erosion. The expected results and interpretations will lead to a further integration of the collected data. In the future, to understand matter transfer in and between landscape ecological units, agricultural influence on nutrient status and flux data will be incorporated.

Effects of Combined Instantaneous High-Pressure and MediumTemperature on the Retention of Total Vitamin Cin Wax Gourd Juices

Based on the instantaneous high-pressure(IHP)produced by high-pressure single pole-cylinder pump, the effects of combining this pressure with medium temperature on the retention of total vitamin C(Vc)in wax gourd juices were investigated under 20 - 80 MPa, 35 - 58℃, pH 3. 0 - 6. 0 and processing time 0-8 min. Results showed that the loss of Vc increased with elevated processing temperatures(50 MPa, 4 min). When the temperature of raw juices was 35℃, the retention of total Vc was higher under 40 - 60 MPa than that under the pressure < 40 MPa or > 60 MPa, and it was up to 94%(4 min). The retention of total Vc decreases slowly within 6 min, but rapidly after 6 min. The pH can also influence the retention of total Vc, and this retention can come to a highest point at pH 6.0.

Role of blowing snow in snow processes in Qilian Mountainous region

Blowing snow is an important part of snow hydrologic processes in mountainous region, however the related researches were rare for the Qilian mountainous region where blowing snow is frequent. Using the observation dataset in 2008 snow season in Binggou wa- tershed in Qilian mountainous region, we systematically studied the energy and mass processes of blowing snow by field observation and model simulation. The results include the analysis of snow observation, the occurrence probability of blowing snow, blowing snow transport and blowing snow sublimation. It was found that blowing snow was obvious in high altitude region （4,146 m）, the snow redislribution phenomena was remarkable. In Yakou station in the study region, blowing snow was easily occurred in midwinter and early spring when no snowmelt, the blowing snow transport was dominated in this period; when snowmelt beginning, the occur- rence probability of blowing snow decreased heavily because of the increasing air temperature, melt, and refrozen phenomena. The blowing snow sublimation accounted for 41.5% of total snow sublimation at Yakou station in 2008 snow season.

Effects of Combined Instantaneous High-Pressure and Medium Temperature on Peroxidase Activity in Wax Gourd Juices

Based on the instantaneous pressurization and depressurization produced by high pressure single pole cylinder pump and valve, the effects of the continuous processing on the peroxidase (POD) activity in wax gourd juices were investigated. Results showed that the processing factors such as pressure, temperature, pH and processing time are important to the POD activity. POD in crude juices could be inactivated apparently above 50 MPa(pH 4.6, 35℃, 4 min), and activated at 20 MPa ( P < 0.01). Its remarkable inactivation could also be observed at 45 and 55℃ (20 MPa, pH 4.6, 4 min), and the evident activation appears at the material temperature 35℃ ( P < 0.01). The pH 3.0 could destroy POD almost completely (20 MPa, 35℃, 4 min), while pH 6.0 could not influence apparently the POD activity in crude juices( P > 0.05). In addition, the rules of POD activity along with the treatment time are variational under different processing pressures. The higher the treating pressure is, the shorter the processing time is needed to inactivate POD.

GIS Based Landslide Susceptibility Mapping with Application of Analytical Hierarchy Process in District Ghizer, Gilgit Baltistan Pakistan

District Ghizer is a rugged mountainous territory which experiences several landslides each year. There are 16 major landslide areas and 53 villages that are at high risk to hazards. Keeping in view the severity of natural hazards, the present study was designed to generate landslide susceptibility map based on twelve causative factors viz., slope, aspect, elevation, drainage network, Stream Power Index (SPI), Topographic Wetness Index (TWI), lithological units, fault lines, rainfall, road network, land cover and soil texture. Soil texture was determined by particle size analysis and data for other factors were acquired from freely available sources. Analytical Hierarchy Process (AHP) was employed to identify major landslide causative factors in the district Ghizer. Further, a temporal assessment from 1999 till 2015 was generated to assess the impact of land cover change on landslides. It indicated that the barren soil/ exposed rocks and glaciers have reduced while the vegetation and water classes have shown increment. The total area that lies in moderate to very high landslide susceptible zones was 74.38%, while slope is the main landslide causative factor in the district Ghizer. Validation of the susceptibility map showed 88.1% of the landslides in the study area had occurred in the moderate to very high susceptible zones.

Relationship between copper content of slag and matte in the SKS copper smelting process

In the newly developed oxygen-enriched bottom-blowing copper smelting process(also known as the SKS copper smelting process), Cu loss in slag is one of the most concerning issues. This paper presents our research results concerning the relationship between the Cu content of the matte and slag in the SKS process; the results are based on actual industrial production in the Dongying Fangyuan copper smelter. The results show that the matte grade strongly influences Cu losses in slag. The dissolved and entrained losses account for 10%–20% and 80%–90% of the total SKS industrial Cu losses in slag, respectively. With increasing matte grade, the dissolved and entrained Cu losses in the SKS slag both increase continuously. When the matte grade is greater than 68%, the content of Cu in the smelting slag increases much more dramatically. To obtain a high direct recovery of copper, the matte grade should be less than 75% in industrial SKS copper production.

Landfill Siting Using GIS and AHP （Analytical Hierarchy Process）： A Case Study AI-Qasim Qadhaa, Babylon, Iraq

The selection of a landfill site is considered as a complicated task because this process is based on many factors and restrictions. For Al-Qasim Qadhaa, which is situated in the southern part of the Babylon Governorate, Iraq, there is no landfill site in that area that conforms to the scientific criteria for selecting sites for landfill. For this reason, 15 criteria were adopted in this study （groundwater depth, rivers, soil types, agriculture lands use, land use, elevation, slope, gas pipelines, oil pipelines, power lines, roads, railways, urban centers, villages and archaeological sites） using GIS （geographic information system）, which has a large ability to manage input data. In addition, the AHP （analytical hierarchy process） method was used to derive the relative weightings for each criterion using pair-wise comparison. To obtain the suitability index for candidate landfill sites, a weighted linear combination method was used. After combining these methods, two suitable candidate landfill sites, with areas of 2.766 km2 and 2.055 km2, respectively, were found to satisfy the scientific and environmental requirements. The area of these sites can accommodate solid waste from 2020 until 2030 based on the required area, which was 0.702 km2.

Origin and advances in implementing blowing-snow effects in the Community Land Model

Snow cover on the Tibetan Plateau(TP)is closely related to regional and continental biological and hydrological processes.The vast snow cover,special climatic conditions,and sparse vegetative cover over the TP facilitate the occurrence of blowing snow,leading to substantial heterogeneities in the snow cover and great promotion in the moisture supply from the land surface to the overlying atmospheric boundary layer.However,blowing-snow processes are significantly misrepresented or even neglected in current models,which causes considerable uncertainties of numerical model simulations and leads to erroneous estimates of snow-related processes in mountainous terrain.We present in this paper a brief review of our work in the past 5 years to serve as a basis for further development and improvement of the land-surface model.These studies can be divided into three parts:detection of the problems,development of the land-surface model,and application of the coupled model over the TP(the logical framework is presented in Figure 1).The origin and advances in the development of a land-surface model with consideration of blowing-snow effects are described herein;and the importance of blowing-snow processes in the land-surface model,especially over the TP,is highlighted.We expect that the blowingsnow studies over the TP will play a key role in documenting and understanding the land-surface processes(LSPs)and the cryospheric changes over the TP.

Dechlorination by combined electrochemical reduction and oxidation

Chlorophenols are typical priority pollutants listed by USEPA (U.S. Environmental Protection Agency). The removal of chlorophenol could be carried out by a combination of electrochemical reduction and oxidation method. Results showed that it was feasible to degrade contaminants containing chlorine atoms by electrochemical reduction to form phenol, which was further degraded on the anode by electrochemical oxidation. Chlorophenol removal rate was more than 90% by the combined electro- chemical reduction and oxidation at current of 6 mA and pH 6. The hydrogen atom is a powerful reducing agent that reductively dechlorinates chlorophenols. The instantaneous current efficiency was calculated and the results indicated that cathodic reduction was the main contributor to the degradation of chlorophenol.