Cause Analysis and Countermeasure of Gypsum Rain in Coal-fired Power Plants

Focusing on the phenomenon of gypsum rain while wet desulphurization(WFGD) were adopted in coal fired power plant without GGH, the paper studied and put forward the solutions : (1) desulfurization facilities related equipment modification;(2) optimal operation of existing desulfurization facilities.

Sliding Mode Predictive Control of Main Steam Pressure in Coal-fired Power Plant Boiler

Since the combustion system of coal-fired boiler in thermal power plant is characterized as time varying, strongly coupled, and nonlinear, it is hard to achieve a satisfactory performance by the conventional proportional integral derivative (PID) control scheme. For the characteristics of the main steam pressure in coal-fired power plant boiler, the sliding mode control system with Smith predictive structure is proposed to look for performance and robustness improvement. First, internal model control (IMC) and Smith predictor (SP) is used to deal with the time delay, and sliding mode controller (SMCr) is designed to overcome the model mismatch. Simulation results show the effectiveness of the proposed controller compared with conventional ones.

Mercury Emission From Coal-fired Power Plants in China

燃煤是最大的人为汞排放源之一，燃煤电厂的汞排放控制问题也越来越为人们所关注。该文将目前公布的中国电厂的汞排放数据进行筛选汇总，得到18个电厂的汞排放数据，通过对比和分析，总结出了符合我国燃煤电厂特点的一般性汞排放规律。结果表明：与美国煤种相比，我国的燃煤具有低氯、高灰的特性，这不利于汞的排放控制；循环流化床燃烧可能会因燃尽率的不同而较煤粉炉燃烧易获得较高的Hgp；空气污染控制设备的使用能够有效地减少汞排放，选择性催化还原＋静电除尘器／布袋除尘器＋石灰石-石膏湿法脱硫（SCR＋ESP／FF＋WFGD）组合的平均脱汞率可达71．48％；SCR的大规模应用可能会将汞大量转移到飞灰和脱硫石膏中，带来二次污染的问题。

Progress and prospects of innovative coal-fired power plants within the energy internet

The development of electrical engineering and electronic, communications, smart power grid, and ultra-high voltage transmission technologies have driven the energy system revolution to the next generation: the energy internet. Progressive penetration of intermittent renewable energy sources into the energy system has led to unprecedented challenges to the currently wide use of coal-fired power generation technologies. Here, the applications and prospects of advanced coal-fired power generation technologies are analyzed. These technologies can be summarized into three categories:(1) large-scale and higher parameters coal-fired power generation technologies, including 620/650/700 oC ultra-supercritical thermal power and double reheat ultra-supercritical coal-fired power generation technologies;(2) system innovation and specific, highefficiency thermal cycles, which consist of renewable energy-aided coal-fired power generation technologies, a supercritical CO_2 Brayton cycle for coal-fired power plants, large-scale air-cooling coal-fired power plant technologies, and innovative layouts for waste heat utilization and enhanced energy cascade utilization;(3) coal-fired power generation combined with poly-generation technologies, which are represented by integrated gasification combined cycle(IGCC) and integrated gasification fuel cell(IGFC) technologies. Concerning the existing coal-fired power units, which are responsible for peak shaving, possible strategies for enhancing flexibility and operational stability are discussed. Furthermore, future trends for coal-fired power plants coupled with cyber-physical system(CPS) technologies are introduced. The development of advanced, coal-fired power generation technologies demonstrates the progress of science and is suitable for the sustainable development of human society.

Optimization of an Existing Coal-fired Power Plant with CO²Capture

Nowadays, the worsening environmental issue caused by CO2 emission is greatly aggravated by human activity. Many CO2 reduction technologies are under fast development. Among these, monoethanolamine (MEA) based CO2 capture technology has been paid great attention. However, when connecting the CO2 capture process with a coal-fired power plant, the huge energy and efficiency penalty caused by CO2 capture has become a serious problem for its application. Thus, it is of great significance to reduce the related energy consumption. Based on an existing coal-fired power plant, this paper proposes a new way for the decarburized retrofitting of the coal-fired power plant, which helps to improve the overall efficiency of the power plant with less energy and efficiency penalty. The decarburized retrofitting scheme proposed will provide a new route for the CO2 capture process in China.

Tolerance Comparison Among Selected Spirulina Strains Cultured Under High Carbon Dioxide and Coal Power Plant Flue Gas Supplements

In order to explore the changes in the growth and protein contents of Spirulina and obtain a proper strain for the fixation of carbon dioxide(CO2 from flue gas,the strains isolated from the Spirulina farms and the strain 208 were cultured under different aeration conditions including no CO2,10%CO2 and coal power plant flue gas supplements.The physiological indexes including filament length,biomass yield and chlorophyll a,soluble protein and phycocyanin contents were determined,respectively.When cultured without CO2 supplement,the strain 4-5 exhibited the highest biomass yield(1.880 g L^(−1)and a specific growth rate(0.367 d−1.However,the specific growth rate of all strains decreased significantly when they were cultured under 10%CO2 and unfiltered coal power plant flue gas supplements.Considerable differences were noted in the performance of the experimental microalgal strains under different contemporaneous conditions.The strain 7-8 achieved the highest biomass yield(1.603 g L^(−1)and relatively high phycocyanin content(7.1%)under 10%CO2 supplement.We noted that strain 4-5 had the highest specific growth rate(0.182 d−1 and biomass yield(0.43 g L^(−1)under coal power plant flue gas supplement.Strain 6-10 displayed the highest soluble protein content(66.02%),and strain 7-8 showed the highest phycocyanin content(9.28%)under coal power plant flue gas supplement.

Evaluating the Technical and Economic Feasibility of Adding a Power Recovery System to the Steam Condenser of a Lignite Coal-Fired Power Plant

Steam is the typical working fluid to drive turbo-generators in coal-fired power plants. It is an effective working fluid, but some of its energy is extracted in an unusable form when condensed. A Power Recovery Cycle (PRC) using a more volatile Secondary Working Fluid (SWF) added to the steam cycle could improve energy efficiency. PRCs have been applied to the flue gas and for combined cycle systems but not to traditional plant steam cycles. This paper details an analysis of adding a steam cycle PRC to a 500 MW lignite coal-fired power plant. A validated model of the plant was developed and PRCs using the three most attractive SWFs, benzene, methanol and hydrazine, were then added to the model. Adding a benzene, methanol, or hydrazine steam cycle PRC will produce an additional 59, 34, and 49 MW, respectively. An AACE Class 4 factored broad capital cost estimate and comparable operating costs and revenue estimates were developed to evaluate PRC feasibility. The benzene, methanol, and hydrazine processes had 2019 Net Present Values (NPVs) @12% of -$32, -$59, and +$35 million ± 40%, respectively. Thus, a PRC may be profitable at current or modest increases to U.S. Upper Midwest electricity prices of around $0.0667/kWh.

Research on Structural Design of Coal Crusher House in Thermal Power Plant

This paper takes the specific characteristics of pulverized coal room in thermal power plant as the starting point,firstly,this paper analyzes the process layout and structure selection,and then the structural design and vibration design requirements of coal crusher house are introduced in this paper.Finally,based on the engineering example,a new structure form of vibration isolation design is creatively proposed,which provides a new design idea for the practical engineering design.

Feasibility Ananlysis of Building Pithead Power Plants in North Shaanxi and Ningxia Coal Bases

North Shaanxi and Ningxia are extremely abundant in coal resources, with excellent geographical positions and transport facilities, suitable to build large size pithead power plants. This paper details the coal resources in North Shaanxi Province and Ningxia Autonomous Region, fuel coal and transportation conditions for building large size pithead power plants, and carries out the analyses of economic benefits and electricity prices of bidding for access to grid for the six recommended power plants. The analyses show that these power plants, after built up, will have strong competitive powers and make contributions for the sustainable development of power industry in North China and Shandong Province.

The flue dust emission of the coal fired power plants in Zhejiang Province attains target

According to statistics, the average dust collection efficiency of flue gas emission in the large and medium- sized power plants in Zhejiang Province at present has attained higher than 97% which surpasses the 95% standard as stipulated by the Ministry of Electric Power. The dust collection efficiency of the Beilungang Power Plant has already attained 99.92%. In recent years, Zhejiang Electric Power Corporation has stipulated that all the newly constructed generating units shall be equipped with high efficiency electrostatic precipitator (ESP) while the existing power plants shall speed up their renovation work for their dust collectors. In combination with the fourth stage project of the Taizhou Power Plant, the improvement work of the dust

Development of Carbon Dioxide Capture Technologies in Coal-Fired Power Plants

With a particular reference to China Huaneng Group's practices in CO_2 capture, this article presents a brief ing on the current development of CO_2 capture technologies in coal-fired power plants both in China and abroad. Sooner or later, the integration of CO_2 capture and storage (CCS) facility with coal-fired power plant will be inevitably put on the agenda of developers.

Formation and emission characteristics of VOCs from a coal-fired power plant

On-site measurements of volatile organic compounds(VOCs)in different streams of flue gas were carried out on a real coal-fired power plant using sampling bags and SUMMA canisters to collect gas samples,filters to collect particle samples.Gas chromatography-flame ionization detector/mass spectrometry and gas chromatography-mass spectrometry was the offline analysis method.We found that the total mass concentration of the tested 102 VOC species at the outlet of wet flue gas desulfuration device was(13456±47)μg·m^(-3),which contained aliphatic hydrocarbons(57.9%),aromatic hydrocarbons(26.8%),halogen-containing species(14.5%),and a small amount of oxygen-containing and nitrogencontaining species.The most abundant species were 1-hexene,n-hexane and 2-methylpentane.The top ten species in terms of mass fraction(with a total mass fraction of 75.3%)were mainly hydrocarbons with a carbon number of 6 or higher and halogenated hydrocarbons with a lower carbon number.The mass concentration of VOC species in the particle phase was significantly lower than that in the gas phase.The change of VOC mass concentrations along the air pollution control devices indicates that conventional pollutant control equipment had a limited effect on VOC reduction.Ozone formation potential calculations showed that aromatic hydrocarbons contributed the highest ozone formation(46.4%)due to their relatively high mass concentrations and MIR(maximum increment reactivity)values.

基于孪生Inception网络的燃烧器火焰状态监测

燃煤电厂炉膛火焰的实时监测关系到发电经济性和锅炉的安全运行,而基于光能、热能和辐射能等能量信号的传统火检技术仅能探测火焰的有无,已无法满足日益迫切的火力发电精细化“调峰”需求。本文以实际电厂燃烧器火焰图像为研究对象,应用基于改进的Inception深度卷积神经网络(deep convolutional neural network,DCNN)的火焰状态分类方法,通过深入分析燃烧器火焰图像特点,对火焰多维度特征进行提取并制作数据集,同时将预处理后的不同类别火焰图像制作成火焰图像数据集,构建Inception DCNN,实现自动特征提取的火焰状态分类,并提出基于孪生Inception DCNN对燃烧器火焰状态进行分类。结果表明,改进的孪生Inception DCNN网络模型将火焰的状态分类问题转化为评价状态相似度问题,间接实现分类目标,识别准确率达到99.86%。

Advanced Strategies to Mobilize Crop Residue to Replace Coal in India

Various published data show the amount of crop residue available annually in India may range from a low of 90 to a high of 180 million tonnes. Different types of crop residue are collected from farmers depending on the geography and crop pattern for instance, in north India rice straw and cotton stalks are collected while in central India soya husk and sugarcane tops are collected. Baling and transporting straw from the field, though appear to be an option for safe disposal, will be feasible only when alternate, effective and economically viable usage methods are identified and facilities and infrastructure for ex-situ management methods are created. One immediate short term use of the residue is to replace 5% - 7% of the 670 million tonnes of coal India currently consumes to generate power. The farmers will benefit from the sale of their excess crop residue. The scheme will reduce pollution due to residue burning practices. Replacing coal will cut the GHG emissions. The challenge is to mobilize the crop residue collection and timely delivery to power plants. The data and calculations in this monogram show that it is economical for the farmer to remove the crop residue from the field quickly by using modern balers, to pelletize the biomass in small-scale distributed pellet plants, to store pellets in the modern steel bins and finally to deliver the pellets to coal plants by using rail transport. The delivered cost is estimated at around Rp 6.78/kg. The Government of India encourages the power plants to pay at least Rp 10/kg for the delivered biomass in the form of pellets. The current monogram analyzes the organization of an efficient supply chain in the State of Haryana India to ensure a sustainable modern enterprise.

Study on Coal Consumption Curve Fitting of the Thermal Power Based on Genetic Algorithm

Coal consumption curve of the thermal power plant can reflect the function relationship between the coal consumption of unit and load, which plays a key role for research on unit economic operation and load optimal dispatch. Now get coal consumption curve is generally obtained by least square method, but which are static curve and these curves remain unchanged for a long time, and make them are incompatible with the actual operation situation of the unit. Furthermore, coal consumption has the characteristics of typical nonlinear and time varying, sometimes the least square method does not work for nonlinear complex problems. For these problems, a method of coal consumption curve fitting of the thermal power plant units based on genetic algorithm is proposed. The residual analysis method is used for data detection;quadratic function is employed to the objective function;appropriate parameters such as initial population size, crossover rate and mutation rate are set;the unit’s actual coal consumption curves are fitted, and comparing the proposed method with least squares method, the results indicate that fitting effect of the former is better than the latter, and further indicate that the proposed method to do curve fitting can best approximate known data in a certain significance, and they can real-timely reflect the interdependence between power output and coal consumption.

Valuing Health Effects of Natural Radionuclides Releases from Yatagan Power Plant

The objective of this paper is the valuation of radiological health effects of Yatagan Power Plant. To this aim the radiation dose calculations are carried out for the population living within 80 km radius of the plant. The average of the maximum measured specific isotopes 238U, 232Th and 226Ra in the flying ash samples are considered as radioactive sources. Based on the dose calculations, first the stochastic health effects and then monetary health effects are estimated. The estimated total collective dose and economic value of the pre-dicted health effects are 0.3098 man Sv/y and 14791 US$/y respectively. The results obtained from the dose calculations are lower than the limits of International Commission of Radiation Protection (ICRP) and it does not pose any risk for public health. Monetary value of health risks is also negligible in comparison to the av-erage yearly sales revenue of the plant which is 250 million US$.