Radial drilling technology, of which the jet bit is the key device, is a research focus in the field of oil drilling and production. This paper establishes mechanical equations for jet bits and analyzes the hydroseal ...Radial drilling technology, of which the jet bit is the key device, is a research focus in the field of oil drilling and production. This paper establishes mechanical equations for jet bits and analyzes the hydroseal of backward jets in bottom holes. Meanwhile this paper establishes a mechanical equation for a high pressure hose and analyzes the axial force distribution. Laboratory experiments indicate that the flow rate, the angle between the backward nozzle axis and the jet bit axis, and the hole diameter are the major influencing factors; the generation of the pulling force is mainly due to the inlet pressure of the jet bit; the backward jets can significantly increase not only the pulling force but also the stability of jet bits. The pulling force would reach 8,376 N under experimental conditions, which can steadily pull the high-pressure hose forward.展开更多
We investigate optical force on a graphene-coated gain microparticle by adopting the Maxwell's stress tensor method.It is found that there exists a threshold gain in obtaining the Fano-profile optical force which ...We investigate optical force on a graphene-coated gain microparticle by adopting the Maxwell's stress tensor method.It is found that there exists a threshold gain in obtaining the Fano-profile optical force which indicates the reversal of optical pushing and pulling force. And giant pushing/pulling force can be achieved if the gain value of the material is in the proximity of the threshold gain. Our results show that the threshold gain is more sensitive to the relaxation time than to the Fermi energy of the graphene. We further study the optical force on larger microparticle to demonstrate the pulling force occurring at octupole resonance with small gain value and then it will appear at quadrupole resonance by increasing gain value. Our work provides an in-depth insight into the interaction between light and gain material and gives the additional degree of freedom to optical manipulation of microparticle.展开更多
To solve the difficulty of generating an ideal Bessel beam,an simplified annular transducer model is proposed to study the axial acoustic radiation force(ARF)and the corresponding negative ARF(pulling force)exerted on...To solve the difficulty of generating an ideal Bessel beam,an simplified annular transducer model is proposed to study the axial acoustic radiation force(ARF)and the corresponding negative ARF(pulling force)exerted on centered elastic spheres for acoustic-vortex(AV)beams of arbitrary orders.Based on the theory of acoustic scattering,the axial distributions of the velocity potential and the ARF for AV beams of different orders generated by the annular transducers with different physical sizes are simulated.It is proved that the pulling force can be generated by AV beams of arbitrary orders with multiple axial regions.The pulling force is more likely to exert on the sphere with a smaller k0a(product of the wave number and the radius)for the AV beam with a bigger topological charge due to the strengthened off-axis acoustic scattering.The pulling force decreases with the increase of the axial distance for the sphere with a bigger k0a.More pulling force areas with wider axial regions can be formed by AV beams using a bigger-sized annular transducer.The theoretical results demonstrate the feasibility of generating the pulling force along the axes of AV beams using the experimentally applicable circular array of planar transducers,and suggest application potentials for multi-position stable object manipulations in biomedical engineering.展开更多
We demonstrate that,in a simple linearly-polarized plane wave,the optical pulling forces on nanoparticle clusters with gain can be induced by the Fano-like resonance.The numerical results based on the full-wave calcul...We demonstrate that,in a simple linearly-polarized plane wave,the optical pulling forces on nanoparticle clusters with gain can be induced by the Fano-like resonance.The numerical results based on the full-wave calculation show that the optical pulling forces can be attributed to the recoil forces for the nanoparticle clusters composed of dipolar nanoparticles with three different configurations.Interestingly,the recoil forces giving rise to optical pulling forces are exactly dominated by the coupling term between the electric and magnetic dipoles excited in the nanoparticle clusters,while other higherorder terms have a negligible contribution.In addition,the optical pulling force can be tailored by modulating the Fano-like resonance via either the particle size or the gain magnitude,offering an alternative freedom degree for optical manipulations of particle clusters.展开更多
Electroslag casting(ESC)is an important method to produce high quality castings.In this study,the ESC up-pulling inner mold method(EUPIM)was used to produce hollow cylindrical castings with the multiple consumable ele...Electroslag casting(ESC)is an important method to produce high quality castings.In this study,the ESC up-pulling inner mold method(EUPIM)was used to produce hollow cylindrical castings with the multiple consumable electrodes.The radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell were analyzed using the finite element method(FEM)with the aid of ANSYS software.The ProCAST software was used to calculate the specific heat,heat conductivity and density curve of Cu.Simulation results show that the radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell near the slag-metal interface of hollow cylndrical casting gradually increase from 0 s to 360 s after the ESC starting(slagging)process but before applying the up-pulling force.The suitable initial up-pulling moment of the inner mold is at around 180-198 s after the starting process.展开更多
Hare:Oh,a turnip!A big turnip!I’m hungry.I’ll pull it out.Ai-Hay-Yo,Ai-Hay-Yo.The turnip is too heavy.I can’t pull it out.Dog:I’m a dog.I’m hungry.Oh,Miss Hare,What are you doing?
The subsea anchor piles of offshore wind power floating platform structures are mainly subjected to uplift and horizontal loads, and this paper focuses on the case of horizontal loads. A three-dimensional numerical si...The subsea anchor piles of offshore wind power floating platform structures are mainly subjected to uplift and horizontal loads, and this paper focuses on the case of horizontal loads. A three-dimensional numerical simulation study of the horizontal pullout characteristics of wind power suction anchor piles in clay layers was carried out to reveal the horizontal movement state of the anchor piles during horizontal pile pullout, the range of pile depth at the pullout point where the horizontal movement is achieved (referred to as the horizontal movement range), the relationship between the pullout load and the ultimate load during the horizontal movement, and the optimal location of the pullout point for the horizontal movement. The results show that at certain pull-out points, the anchor pile produces an overall horizontal movement state under suitable horizontal pull-out loads. The depth of the pile pull-out point for horizontal movement is in the middle and lower part of the pile, i.e. 14.2 m to 14.5 m. The horizontal pull-out load of 24,000 kN at a depth of 14.5 m within the pile horizontal movement range of 14.2m to 14.5 m is the maximum ultimate horizontal pull-out load;the optimum pull-out point depth is 14.5 m at 0.275 L (L is the pile length). For each pull-out point of the anchor pile in horizontal movement, the horizontal pull-out load in horizontal movement and the horizontal ultimate pull-out load existed and it was found that the two values were not exactly the same, the values were compared and it was found that at the optimum pull-out point the value of the ultimate horizontal pull-out load/horizontal pull-out load in horizontal movement tended to 1.展开更多
The cervical headache and vertigo were treated with acupuncture at Fengchi（GB20）and Wangu（GB 12）and lifting,rotating,pulling-manipulation at neck.The total effective ratewas 91.4％.The therapeutic effects of these...The cervical headache and vertigo were treated with acupuncture at Fengchi（GB20）and Wangu（GB 12）and lifting,rotating,pulling-manipulation at neck.The total effective ratewas 91.4％.The therapeutic effects of these two types,malposition type and osteophytosis type,were studied and compared.The results were significantly different in statistics.展开更多
The paper proposes a novel zero current transition (ZCT) push pull forward converter. The auxiliary resonant cell is in parallel with the main circuit and the zero current switching (ZCS) range of the main and the aux...The paper proposes a novel zero current transition (ZCT) push pull forward converter. The auxiliary resonant cell is in parallel with the main circuit and the zero current switching (ZCS) range of the main and the auxiliary switches of the proposed converter are entirely achieved. The resonant capacitor achieves high voltage by operating the auxiliary cell. The auxiliary switch turns on before the main switches turn off, the high voltage of resonant capacitor blanks off the rectifier, and then the curr...展开更多
The application areas of conventional push pull converters are limited because of high voltage stress of switches (twice of input voltage). This paper presents a novel zero voltage and zero current switching (ZCS)...The application areas of conventional push pull converters are limited because of high voltage stress of switches (twice of input voltage). This paper presents a novel zero voltage and zero current switching (ZCS) PWM push pull three level converter in which the voltage stress of switches is input voltage. With phase shifted modulation strategy, the leading switches can only realize zero voltage switching (ZVS), and the lagging switches can realize ZCS when block capacitor and block diodes are added. Using the strategy, the converter overcomes the drawbacks presented by the conventional push pull converter, such as magnetic aberration, large switch loss, and voltage spike on switches, so it can get higher efficiency, and a wider application area. The operating principle of the new converter is analyzed and verified on a 600 W, 50 kHz experimental prototype. Several zero voltage and zero current switching PWM push pull three level converters are proposed.展开更多
基金supported by High-tech Research and Development Program of China (No. 2007AA09Z315)Doctoral Foundation of Ministry of Education of China (No. 20070425006)
文摘Radial drilling technology, of which the jet bit is the key device, is a research focus in the field of oil drilling and production. This paper establishes mechanical equations for jet bits and analyzes the hydroseal of backward jets in bottom holes. Meanwhile this paper establishes a mechanical equation for a high pressure hose and analyzes the axial force distribution. Laboratory experiments indicate that the flow rate, the angle between the backward nozzle axis and the jet bit axis, and the hole diameter are the major influencing factors; the generation of the pulling force is mainly due to the inlet pressure of the jet bit; the backward jets can significantly increase not only the pulling force but also the stability of jet bits. The pulling force would reach 8,376 N under experimental conditions, which can steadily pull the high-pressure hose forward.
基金supported by the National Natural Science Foundation of China (Grant Nos. 11904184, 11847033, and 11704158)the Natural Science Foundation of Jiangsu Province,China (Grant No. BK20170170)。
文摘We investigate optical force on a graphene-coated gain microparticle by adopting the Maxwell's stress tensor method.It is found that there exists a threshold gain in obtaining the Fano-profile optical force which indicates the reversal of optical pushing and pulling force. And giant pushing/pulling force can be achieved if the gain value of the material is in the proximity of the threshold gain. Our results show that the threshold gain is more sensitive to the relaxation time than to the Fermi energy of the graphene. We further study the optical force on larger microparticle to demonstrate the pulling force occurring at octupole resonance with small gain value and then it will appear at quadrupole resonance by increasing gain value. Our work provides an in-depth insight into the interaction between light and gain material and gives the additional degree of freedom to optical manipulation of microparticle.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.11934009,11974187,and 11604156).
文摘To solve the difficulty of generating an ideal Bessel beam,an simplified annular transducer model is proposed to study the axial acoustic radiation force(ARF)and the corresponding negative ARF(pulling force)exerted on centered elastic spheres for acoustic-vortex(AV)beams of arbitrary orders.Based on the theory of acoustic scattering,the axial distributions of the velocity potential and the ARF for AV beams of different orders generated by the annular transducers with different physical sizes are simulated.It is proved that the pulling force can be generated by AV beams of arbitrary orders with multiple axial regions.The pulling force is more likely to exert on the sphere with a smaller k0a(product of the wave number and the radius)for the AV beam with a bigger topological charge due to the strengthened off-axis acoustic scattering.The pulling force decreases with the increase of the axial distance for the sphere with a bigger k0a.More pulling force areas with wider axial regions can be formed by AV beams using a bigger-sized annular transducer.The theoretical results demonstrate the feasibility of generating the pulling force along the axes of AV beams using the experimentally applicable circular array of planar transducers,and suggest application potentials for multi-position stable object manipulations in biomedical engineering.
基金Project supported by the Natural Science Foundation of Guangxi Province of China (Grant No.2021GXNSFDA196001)the National Natural Science Foundation of China (Grant Nos.12174076,12074084,and 12204117)+1 种基金Guangxi Science and Technology Project (Grant Nos.AD22080042 and AB21220052)Open Project of State Key Laboratory of Surface Physics in Fudan University (Grant No.KF2022_15)。
文摘We demonstrate that,in a simple linearly-polarized plane wave,the optical pulling forces on nanoparticle clusters with gain can be induced by the Fano-like resonance.The numerical results based on the full-wave calculation show that the optical pulling forces can be attributed to the recoil forces for the nanoparticle clusters composed of dipolar nanoparticles with three different configurations.Interestingly,the recoil forces giving rise to optical pulling forces are exactly dominated by the coupling term between the electric and magnetic dipoles excited in the nanoparticle clusters,while other higherorder terms have a negligible contribution.In addition,the optical pulling force can be tailored by modulating the Fano-like resonance via either the particle size or the gain magnitude,offering an alternative freedom degree for optical manipulations of particle clusters.
基金financially supported by the National Natural Science Foundation of China(Nos:51674070,U1560203,51434004,51475313)the Fundamental Research Funds for the Central Universities,China(Grant no.:N162504006)
文摘Electroslag casting(ESC)is an important method to produce high quality castings.In this study,the ESC up-pulling inner mold method(EUPIM)was used to produce hollow cylindrical castings with the multiple consumable electrodes.The radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell were analyzed using the finite element method(FEM)with the aid of ANSYS software.The ProCAST software was used to calculate the specific heat,heat conductivity and density curve of Cu.Simulation results show that the radial deformation,the axial and radial internal stress of the inner mold,and the axial internal stress of the slag shell near the slag-metal interface of hollow cylndrical casting gradually increase from 0 s to 360 s after the ESC starting(slagging)process but before applying the up-pulling force.The suitable initial up-pulling moment of the inner mold is at around 180-198 s after the starting process.
文摘Hare:Oh,a turnip!A big turnip!I’m hungry.I’ll pull it out.Ai-Hay-Yo,Ai-Hay-Yo.The turnip is too heavy.I can’t pull it out.Dog:I’m a dog.I’m hungry.Oh,Miss Hare,What are you doing?
文摘The subsea anchor piles of offshore wind power floating platform structures are mainly subjected to uplift and horizontal loads, and this paper focuses on the case of horizontal loads. A three-dimensional numerical simulation study of the horizontal pullout characteristics of wind power suction anchor piles in clay layers was carried out to reveal the horizontal movement state of the anchor piles during horizontal pile pullout, the range of pile depth at the pullout point where the horizontal movement is achieved (referred to as the horizontal movement range), the relationship between the pullout load and the ultimate load during the horizontal movement, and the optimal location of the pullout point for the horizontal movement. The results show that at certain pull-out points, the anchor pile produces an overall horizontal movement state under suitable horizontal pull-out loads. The depth of the pile pull-out point for horizontal movement is in the middle and lower part of the pile, i.e. 14.2 m to 14.5 m. The horizontal pull-out load of 24,000 kN at a depth of 14.5 m within the pile horizontal movement range of 14.2m to 14.5 m is the maximum ultimate horizontal pull-out load;the optimum pull-out point depth is 14.5 m at 0.275 L (L is the pile length). For each pull-out point of the anchor pile in horizontal movement, the horizontal pull-out load in horizontal movement and the horizontal ultimate pull-out load existed and it was found that the two values were not exactly the same, the values were compared and it was found that at the optimum pull-out point the value of the ultimate horizontal pull-out load/horizontal pull-out load in horizontal movement tended to 1.
文摘The cervical headache and vertigo were treated with acupuncture at Fengchi（GB20）and Wangu（GB 12）and lifting,rotating,pulling-manipulation at neck.The total effective ratewas 91.4％.The therapeutic effects of these two types,malposition type and osteophytosis type,were studied and compared.The results were significantly different in statistics.
文摘The paper proposes a novel zero current transition (ZCT) push pull forward converter. The auxiliary resonant cell is in parallel with the main circuit and the zero current switching (ZCS) range of the main and the auxiliary switches of the proposed converter are entirely achieved. The resonant capacitor achieves high voltage by operating the auxiliary cell. The auxiliary switch turns on before the main switches turn off, the high voltage of resonant capacitor blanks off the rectifier, and then the curr...
文摘The application areas of conventional push pull converters are limited because of high voltage stress of switches (twice of input voltage). This paper presents a novel zero voltage and zero current switching (ZCS) PWM push pull three level converter in which the voltage stress of switches is input voltage. With phase shifted modulation strategy, the leading switches can only realize zero voltage switching (ZVS), and the lagging switches can realize ZCS when block capacitor and block diodes are added. Using the strategy, the converter overcomes the drawbacks presented by the conventional push pull converter, such as magnetic aberration, large switch loss, and voltage spike on switches, so it can get higher efficiency, and a wider application area. The operating principle of the new converter is analyzed and verified on a 600 W, 50 kHz experimental prototype. Several zero voltage and zero current switching PWM push pull three level converters are proposed.
