ZG0Cr26Ni5Mo3Cu3 Duplex Stainless Steel(DSS) was solution treated at 1,060 ℃ for 3 h, followed by water cooling. Tempering treatments were conducted at 720, 750 and 780 ℃, respectively, for 16 h, followed by air coo...ZG0Cr26Ni5Mo3Cu3 Duplex Stainless Steel(DSS) was solution treated at 1,060 ℃ for 3 h, followed by water cooling. Tempering treatments were conducted at 720, 750 and 780 ℃, respectively, for 16 h, followed by air cooling. The microstructures of ZG0Cr26Ni5Mo3Cu3 duplex stainless steel samples treated at different tempering temperatures were observed by scanning electron microscope(SEM) and energy dispersal spectroscopy(EDS), and the phase consitutions were analyzed using X-ray diffraction(XRD). The effects of the precipitation of sigma(σ) phase on the duplex phase percentage, hardness, impact toughness and corrosion resistance of the DSS were studied. Results showed that microstructures of ZG0Cr26Ni5Mo3Cu3 after solution treatment consists of ferrite(α) phase and austenite(γ) phase; after being tempered at different temperatures, σ phase appeared due to a eutectoid-type reaction of α→σ+γ2 during tempering treatment. It was observed that σ phase distributed along the grain boundary. The volume fraction of σ and γ phases increased with increasing tempering temperature in the range of 720 to 780 ℃, whereas the volume fraction of α phase showed the opposite trend. When the percentage of σ phase increased, the hardness of steel also increased. In the solution treated steel, hardness was measured to be only 244.0 HB, because σ phase did not appear. However, it increased to 391.8 HB when the DSS was tempered at 780℃because a great of deal of σ phase appeared. The impact toughness and corrosion resistance of DSS decreased when the percentage of σ phase increased.展开更多
The voltage controlled oscillator-based （VCO-based） continuous-time delta-sigma （CTDS） analog to digital converter （ADC） suffers from nonlinearity and mismatch in its feedback network. A new feedback network con...The voltage controlled oscillator-based （VCO-based） continuous-time delta-sigma （CTDS） analog to digital converter （ADC） suffers from nonlinearity and mismatch in its feedback network. A new feedback network consisting of a phase shifter is proposed. The phase shifter replaces the digital to analog converter （DAC） in the proposed architecture. Feasibility of the proposed idea is discussed and its higher performance is illustrated through a behavioral simulation approach （CppSim）. We have also developed the phase shifter as a variable all-pass filter in the C language. The nonlinearity and mismatch of the system caused by DAC is mitigated, resulting in higher signal to noise ratio （SNR） and signal to noise and distortion ratio （SNDR）, respectively.展开更多
A fractional frequency divider based on phase switching and negative feedback delta-sigma modulator(NF-DSM) is presented. The phase switching circuit, realized by switching 8 signals generated by a divider-by-4 circui...A fractional frequency divider based on phase switching and negative feedback delta-sigma modulator(NF-DSM) is presented. The phase switching circuit, realized by switching 8 signals generated by a divider-by-4 circuit, is adopted to reduce the frequency division step. The NF-DSM, which can obtain smooth output spectra, is proposed to generate the fractional part of the division ratio, moreover, the integer part of the division ratio is realized by a divider-by-2/3 circuit chain. Fabricated in TSMC 0.18 μm RF CMOS technology, the fractional frequency divider achieves a measured operation frequency from 0.5 GHz to 8 GHz. With a 1.8 V supply voltage, the maximum current consumption of the whole divider is 17.5 mA, and the chip area is 0.58 mm^2, including the pads.展开更多
The chirality structure of a single-walled carbon nanotube(SWNT)strongly depends on the composition of catalyst used in the chemical vapor deposition process.In this study,we develop a porous magnesia supported mangan...The chirality structure of a single-walled carbon nanotube(SWNT)strongly depends on the composition of catalyst used in the chemical vapor deposition process.In this study,we develop a porous magnesia supported manganese-rhenium(MnRe/MgO)catalyst for chirality-selective synthesis of SWNTs.Detailed characterizations reveal that(6,5)tubes with a selectivity higher than 70%are grown from the Re-rich MnRe/MgO catalyst.By comparing the SWNT growth results with those of monometallic Mn or Re,the formation of sigma phase,an intermetallic compound occurring in transition-metal alloy systems,is revealed to be crucial for the dominant synthesis of(6,5)SWNTs.This work not only extends the application of sigma phase alloy for catalytic synthesis of SWNTs,but also sheds lights on the growth of SWNTs with a high chirality selectivity.展开更多
Improved life assessment techniques will enable engineering components to be replaced before failure, thereby reducing the risk of industrial accidents as well as minimizing financial loss due to unscheduled outages. ...Improved life assessment techniques will enable engineering components to be replaced before failure, thereby reducing the risk of industrial accidents as well as minimizing financial loss due to unscheduled outages. For components operating at high temperatures, temperature measurement is very important. In many situations, the environmental conditions are too hostile for conventional techniques to be used. Researchers over the world have been looking for new techniques for temperature measurement and one such device, called Feroplug, has been developed previously by the and coworkers. The Feroplug has been patented in USA, UK and Europe by the British Technology Group. The underlying principle of the Feroplug is based on the transformation of ferrite in some specially designed duplex stainless steels. This paper describes a new invention called Sigmaplug which is a new development of the Feroplug but using an entirely different physical principle. It was discovered that the sigma phase in Fe展开更多
This paper investigates the design of digital Sigma-Delta Modulator (SDM) for fractional-N frequency synthesizer. Characteristics of SDMs are compared through theory analysis and simulation. The curve of maximum-loop-...This paper investigates the design of digital Sigma-Delta Modulator (SDM) for fractional-N frequency synthesizer. Characteristics of SDMs are compared through theory analysis and simulation. The curve of maximum-loop-bandwidth vs. maximum-phase-noise is suggested to be a new criterion to the performance of SDM,which greatly helps designers to select an appropriate SDM structure to meet their real application requirements and to reduce the cost as low as possible. A low-spur 3-order Mul-tistage Noise Shaping (MASH)-1-1-1 SDM using three 2-bit first-order cascaded modulators is proposed,which balances the requirements of tone-free and maximum operation frequency.展开更多
The pattern of isentropes in the vicinity of a first-order phase transition is proposed as a key for a sub-classification. While the confinement-deconfinement transition, conjectured to set in beyond a critical end po...The pattern of isentropes in the vicinity of a first-order phase transition is proposed as a key for a sub-classification. While the confinement-deconfinement transition, conjectured to set in beyond a critical end point in the QCD phase diagram, is often related to an entropic transition and the apparently settled gas-liquid transition in nuclear matter is an enthalphic transition, the conceivable local isentropes w.r.t. “incoming” or “outgoing” serve as another useful guide for discussing possible implications, both in the presumed hydrodynamical expansion stage of heavy-ion collisions and the core-collapse of supernova explosions. Examples, such as the quark-meson model and two-phase models, are shown to distinguish concisely the different transitions.展开更多
基金financially supported by National Key R&D Program of China(No.2017YFB0305100)Science&Technology Research Project of Guangdong Province(No.2015B090926012+1 种基金2015A0404040232014B090907005)
文摘ZG0Cr26Ni5Mo3Cu3 Duplex Stainless Steel(DSS) was solution treated at 1,060 ℃ for 3 h, followed by water cooling. Tempering treatments were conducted at 720, 750 and 780 ℃, respectively, for 16 h, followed by air cooling. The microstructures of ZG0Cr26Ni5Mo3Cu3 duplex stainless steel samples treated at different tempering temperatures were observed by scanning electron microscope(SEM) and energy dispersal spectroscopy(EDS), and the phase consitutions were analyzed using X-ray diffraction(XRD). The effects of the precipitation of sigma(σ) phase on the duplex phase percentage, hardness, impact toughness and corrosion resistance of the DSS were studied. Results showed that microstructures of ZG0Cr26Ni5Mo3Cu3 after solution treatment consists of ferrite(α) phase and austenite(γ) phase; after being tempered at different temperatures, σ phase appeared due to a eutectoid-type reaction of α→σ+γ2 during tempering treatment. It was observed that σ phase distributed along the grain boundary. The volume fraction of σ and γ phases increased with increasing tempering temperature in the range of 720 to 780 ℃, whereas the volume fraction of α phase showed the opposite trend. When the percentage of σ phase increased, the hardness of steel also increased. In the solution treated steel, hardness was measured to be only 244.0 HB, because σ phase did not appear. However, it increased to 391.8 HB when the DSS was tempered at 780℃because a great of deal of σ phase appeared. The impact toughness and corrosion resistance of DSS decreased when the percentage of σ phase increased.
基金supported by Iran Telecommunication Research Center under Grant No. 4222/500
文摘The voltage controlled oscillator-based （VCO-based） continuous-time delta-sigma （CTDS） analog to digital converter （ADC） suffers from nonlinearity and mismatch in its feedback network. A new feedback network consisting of a phase shifter is proposed. The phase shifter replaces the digital to analog converter （DAC） in the proposed architecture. Feasibility of the proposed idea is discussed and its higher performance is illustrated through a behavioral simulation approach （CppSim）. We have also developed the phase shifter as a variable all-pass filter in the C language. The nonlinearity and mismatch of the system caused by DAC is mitigated, resulting in higher signal to noise ratio （SNR） and signal to noise and distortion ratio （SNDR）, respectively.
基金Supported by the National Natural Science Foundation of China(No.61674037)National Key Research and Development Program of China(No.2016YFC0800400)the Priority Academic Program Development of Jiangsu Higher Education Institutions
文摘A fractional frequency divider based on phase switching and negative feedback delta-sigma modulator(NF-DSM) is presented. The phase switching circuit, realized by switching 8 signals generated by a divider-by-4 circuit, is adopted to reduce the frequency division step. The NF-DSM, which can obtain smooth output spectra, is proposed to generate the fractional part of the division ratio, moreover, the integer part of the division ratio is realized by a divider-by-2/3 circuit chain. Fabricated in TSMC 0.18 μm RF CMOS technology, the fractional frequency divider achieves a measured operation frequency from 0.5 GHz to 8 GHz. With a 1.8 V supply voltage, the maximum current consumption of the whole divider is 17.5 mA, and the chip area is 0.58 mm^2, including the pads.
基金supported by the Key Basic Research Project of Shandong Province,China(No.ZR2019ZD49)the National Natural Science Foundation of China(Nos.51972184 and 51802316)the Natural Science Foundation of Liaoning Province,China(No.2020-MS-009).
文摘The chirality structure of a single-walled carbon nanotube(SWNT)strongly depends on the composition of catalyst used in the chemical vapor deposition process.In this study,we develop a porous magnesia supported manganese-rhenium(MnRe/MgO)catalyst for chirality-selective synthesis of SWNTs.Detailed characterizations reveal that(6,5)tubes with a selectivity higher than 70%are grown from the Re-rich MnRe/MgO catalyst.By comparing the SWNT growth results with those of monometallic Mn or Re,the formation of sigma phase,an intermetallic compound occurring in transition-metal alloy systems,is revealed to be crucial for the dominant synthesis of(6,5)SWNTs.This work not only extends the application of sigma phase alloy for catalytic synthesis of SWNTs,but also sheds lights on the growth of SWNTs with a high chirality selectivity.
文摘Improved life assessment techniques will enable engineering components to be replaced before failure, thereby reducing the risk of industrial accidents as well as minimizing financial loss due to unscheduled outages. For components operating at high temperatures, temperature measurement is very important. In many situations, the environmental conditions are too hostile for conventional techniques to be used. Researchers over the world have been looking for new techniques for temperature measurement and one such device, called Feroplug, has been developed previously by the and coworkers. The Feroplug has been patented in USA, UK and Europe by the British Technology Group. The underlying principle of the Feroplug is based on the transformation of ferrite in some specially designed duplex stainless steels. This paper describes a new invention called Sigmaplug which is a new development of the Feroplug but using an entirely different physical principle. It was discovered that the sigma phase in Fe
基金the National Natural Science Foundation of China (No. 60025101, No.90207001, and No. 90307016).
文摘This paper investigates the design of digital Sigma-Delta Modulator (SDM) for fractional-N frequency synthesizer. Characteristics of SDMs are compared through theory analysis and simulation. The curve of maximum-loop-bandwidth vs. maximum-phase-noise is suggested to be a new criterion to the performance of SDM,which greatly helps designers to select an appropriate SDM structure to meet their real application requirements and to reduce the cost as low as possible. A low-spur 3-order Mul-tistage Noise Shaping (MASH)-1-1-1 SDM using three 2-bit first-order cascaded modulators is proposed,which balances the requirements of tone-free and maximum operation frequency.
文摘The pattern of isentropes in the vicinity of a first-order phase transition is proposed as a key for a sub-classification. While the confinement-deconfinement transition, conjectured to set in beyond a critical end point in the QCD phase diagram, is often related to an entropic transition and the apparently settled gas-liquid transition in nuclear matter is an enthalphic transition, the conceivable local isentropes w.r.t. “incoming” or “outgoing” serve as another useful guide for discussing possible implications, both in the presumed hydrodynamical expansion stage of heavy-ion collisions and the core-collapse of supernova explosions. Examples, such as the quark-meson model and two-phase models, are shown to distinguish concisely the different transitions.
