Ultrahigh spatiotemporal resolution beam signal reconstruction with bunch phase compensation

Various electromagnetic signals are excited by the beam in the acceleration and beam-diagnostic elements of a particle accelerator.It is important to obtain time-domain waveforms of these signals with high temporal resolution for research,such as the study of beam–cavity interactions and bunch-by-bunch parameter measurements.Therefore,a signal reconstruction algorithm with ultrahigh spatiotemporal resolution and bunch phase compensation based on equivalent sampling is proposed in this paper.Compared with traditional equivalent sampling,the use of phase compensation and setting the bunch signal zero-crossing point as the time reference can construct a more accurate reconstructed signal.The basic principles of the method,simulation,and experimental comparison are also introduced.Based on the beam test platform of the Shanghai Synchrotron Radiation Facility(SSRF)and the method of experimental verification,the factors that affect the reconstructed signal quality are analyzed and discussed,including the depth of the sampled data,quantization noise of analog-to-digital converter,beam transverse oscillation,and longitudinal oscillation.The results of the beam experiments show that under the user operation conditions of the SSRF,a beam excitation signal with an amplitude uncertainty of 2%can be reconstructed.

For LEO Satellite Networks: Intelligent Interference Sensing and Signal Reconstruction Based on Blind Separation Technology

In LEO satellite communication networks,the number of satellites has increased sharply, the relative velocity of satellites is very fast, then electronic signal aliasing occurs from time to time. Those aliasing signals make the receiving ability of the signal receiver worse, the signal processing ability weaker,and the anti-interference ability of the communication system lower. Aiming at the above problems, to save communication resources and improve communication efficiency, and considering the irregularity of interference signals, the underdetermined blind separation technology can effectively deal with the problem of interference sensing and signal reconstruction in this scenario. In order to improve the stability of source signal separation and the security of information transmission, a greedy optimization algorithm can be executed. At the same time, to improve network information transmission efficiency and prevent algorithms from getting trapped in local optima, delete low-energy points during each iteration process. Ultimately, simulation experiments validate that the algorithm presented in this paper enhances both the transmission efficiency of the network transmission system and the security of the communication system, achieving the process of interference sensing and signal reconstruction in the LEO satellite communication system.

Signal reconstruction in wireless sensor networks based on a cubature Kalman particle filter

For solving the issues of the signal reconstruction of nonlinear non-Gaussian signals in wireless sensor networks （WSNs）, a new signal reconstruction algorithm based on a cubature Kalman particle filter （CKPF） is proposed in this paper. We model the reconstruction signal first and then use the CKPF to estimate the signal. The CKPF uses a cubature Kalman filter （CKF） to generate the importance proposal distribution of the particle filter and integrates the latest observation, which can approximate the true posterior distribution better. It can improve the estimation accuracy. CKPF uses fewer cubature points than the unscented Kalman particle filter （UKPF） and has less computational overheads. Meanwhile, CKPF uses the square root of the error covariance for iterating and is more stable and accurate than the UKPF counterpart. Simulation results show that the algorithm can reconstruct the observed signals quickly and effectively, at the same time consuming less computational time and with more accuracy than the method based on UKPF.

Research on the Signal Reconstruction of the Phased Array Structural Health Monitoring Based Using the Basis Pursuit Algorithm

The signal processing problem has become increasingly complex and demand high acquisition system,this paper proposes a new method to reconstruct the structure phased array structural health monitoring signal.The method is derived from the compressive sensing theory and the signal is reconstructed by using the basis pursuit algorithm to process the ultrasonic phased array signals.According to the principles of the compressive sensing and signal processing method,non-sparse ultrasonic signals are converted to sparse signals by using sparse transform.The sparse coefficients are obtained by sparse decomposition of the original signal,and then the observation matrix is constructed according to the corresponding sparse coefficients.Finally,the original signal is reconstructed by using basis pursuit algorithm,and error analysis is carried on.Experimental research analysis shows that the signal reconstruction method can reduce the signal complexity and required the space efficiently.

A sparsity adaptive compressed signal reconstruction based on sensing dictionary

Signal reconstruction is a significantly important theoretical issue for compressed sensing.Considering the situation of signal reconstruction with unknown sparsity,the conventional signal reconstruction algorithms usually perform low accuracy.In this work,a sparsity adaptive signal reconstruction algorithm using sensing dictionary is proposed to achieve a lower reconstruction error.The sparsity estimation method is combined with the construction of the support set based on sensing dictionary.Using the adaptive sparsity method,an iterative signal reconstruction algorithm is proposed.The sufficient conditions for the exact signal reconstruction of the algorithm also is proved by theory.According to a series of simulations,the results show that the proposed method has higher precision compared with other state-of-the-art signal reconstruction algorithms especially in a high compression ratio scenarios.

Obtaining Prior Information for Ultrasonic Signal Reconstruction from FRI Sparse Sampling Data

Finite rate of innovation sampling is a novel sub-Nyquist sampling method that can reconstruct a signal from sparse sampling data.The application of this method in ultrasonic testing greatly reduces the signal sampling rate and the quantity of sampling data.However,the pulse number of the signal must be known beforehand for the signal reconstruction procedure.The accuracy of this prior information directly affects the accuracy of the estimated parameters of the signal and influences the assessment of flaws,leading to a lower defect detection ratio.Although the pulse number can be pre-given by theoretical analysis,the process is still unable to assess actual complex random orientation defects.Therefore,this paper proposes a new method that uses singular value decomposition(SVD) for estimating the pulse number from sparse sampling data and avoids the shortcoming of providing the pulse number in advance for signal reconstruction.When the sparse sampling data have been acquired from the ultrasonic signal,these data are transformed to discrete Fourier coefficients.A Hankel matrix is then constructed from these coefficients,and SVD is performed on the matrix.The decomposition coefficients reserve the information of the pulse number.When the decomposition coefficients generated by noise according to noise level are removed,the number of the remaining decomposition coefficients is the signal pulse number.The feasibility of the proposed method was verified through simulation experiments.The applicability was tested in ultrasonic experiments by using sample flawed pipelines.Results from simulations and real experiments demonstrated the efficiency of this method.

Equalization Reconstruction Algorithm Based on Reference Signal Frequency Domain Block Joint for DTMB-Based Passive Radar

Channel equalization plays a pivotal role within the reconstruction phase of passive radar reference signals.In the context of reconstructing digital terrestrial multimedia broadcasting(DTMB)signals for low-slow-small(LSS)target detection,a novel frequency domain block joint equalization algorithm is presented in this article.From the DTMB signal frame structure and channel multipath transmission characteristics,this article adopts a unconventional approach where the delay and frame structure of each DTMB signal frame are reconfigured to create a circular convolution block,facilitating concurrent fast Fourier transform(FFT)calculations.Following equalization,an inverse fast Fourier transform(IFFT)-based joint output and subsequent data reordering are executed to finalize the equalization process for the DTMB signal.Simulation and measured data confirm that this algorithm outperforms conventional techniques by reducing signal errors rate and enhancing real-time processing.In passive radar LSS detection,it effectively suppresses multipath and noise through frequency domain equalization,reducing false alarms and improving the capabilities of weak target detection.

Nonuniform Three-dimensional Configuration Distributed SAR Signal Reconstruction Clutter Suppression

This paper deals with the problem of clutter suppression in spaceborne distributed synthetic aperture radar （D-SAR） with nonuniform three-dimensional （3D） configuration geometry. In order to make a breakthrough of the configuration limitation of the traditional space time adaptive processing （STAP） based on uniform array and improve the inhomogeneous clutter suppres- sion performance, this paper considers signal reconstrtiction technique using array interpolation to process the D-SAR signal. An array interpolation signal reconstruction method based on pitching-partition is derived then a signal reconstruction 3D-STAP clutter suppression method applied to nonuniform 3D configuration is proposed. In particular, the proposed method is compared with conventional methods and the performance analysis is carried out based on simulations. The improvement factor （IF） for clutter suppression is imported and reported as a benchmark on the clutter suppression effect.

A Lamb wave signal reconstruction method for high-resolution damage imaging

In Lamb wave-based Structural Health Monitoring(SHM), a high-enough spatial resolution is highly required for Lamb wave signals to ensure the resolution and accuracy of damage detection. However, besides the dispersion characteristic, the signal spatial resolution is also largely restricted by the space duration of excitation waveforms, i.e., the Initial Spatial Resolution(ISR)for the signals before travelling. To resolve the problem of inferior signal spatial resolution of Lamb waves, a Lamb Wave Signal Reconstruction(LWSR) method is presented and applied for highresolution damage imaging in this paper. In LWSR, not only a new linearly-dispersive signal is reconstructed from an original Lamb wave signal, but also the group velocity at the central frequency is sufficiently decreased. Then, both dispersion compensation and ISR improvement can be realized to achieve a satisfying signal spatial resolution. After the frequency domain sensing model and spatial resolution of Lamb wave signals are firstly analyzed, the basic idea and numerical realization of LWSR are discussed. Numerical simulations are also implemented to preliminarily validate LWSR. Subsequently, LWSR-based high-resolution damage imaging is developed. An experiment of adjacent multiple damage identification is finally conducted to demonstrate the efficiency of LWSR and LWSR-based imaging methods.

Nonlinear multifunctional sensor signal reconstruction based on least squares support vector machines and total least squares algorithm

Least squares support vector machines (LS-SVMs) are modified support vector machines (SVMs) that involve equality constraints and work with a least squares cost function, which simplifies the optimization procedure. In this paper, a novel training algorithm based on total least squares (TLS) for an LS-SVM is presented and applied to multifunctional sensor signal reconstruction. For three different nonlinearities of a multifunctional sensor model, the reconstruction accuracies of input signals are 0.001 36%, 0.031 84% and 0.504 80%, respectively. The experimental results demonstrate the higher reliability and accuracy of the proposed method for multifunctional sensor signal reconstruction than the original LS-SVM training algorithm, and verify the feasibility and stability of the proposed method.

UNIQUENESS THEOREMS AND ALGORITHM FOR DISCRETE SIGNAL RECONSTRUCTION FROM ITS AUTOCORRELATION FUNCTION AND ONE SAMPLE

Based on the results of the authors’ previous work "Discrete signal reconstruction from itsspectral magnitude and some samples," the uniqueness of the discrete signal reconstructionfrom its autocorrelation function and one sample is discussed in detail in this paper, then fourtheorems are presented. And finally an effective iterative algorithm recovering the discretesignal is provided.

Reconstruction of sub cross-correlation cancellation technique for unambiguous acquisition of BOC(kn, n) signals

In order to solve the problem of ambiguous acquisition of BOC signals caused by its property of multiple peaks,an unambiguous acquisition algorithm named reconstruction of sub cross-correlation cancellation technique(RSCCT)for BOC(kn,n)signals is proposed.In this paper,the principle of signal decomposition is combined with the traditional acquisition algorithm structure,and then based on the method of reconstructing the correlation function.The method firstly gets the sub-pseudorandom noise(PRN)code by decomposing the local PRN code,then uses BOC(kn,n)and the sub-PRN code cross-correlation to get the sub cross-correlation function.Finally,the correlation peak with a single peak is obtained by reconstructing the sub cross-correlation function so that the ambiguities of BOC acquisition are removed.The simulation shows that RSCCT can completely eliminate the side peaks of BOC(kn,n)group signals while maintaining the narrow correlation of BOC,and its computational complexity is equivalent to sub carrier phase cancellation(SCPC)and autocorrelation side-peak cancellation technique(ASPeCT),and it reduces the computational complexity relative to BPSK-like.For BOC(n,n),the acquisition sensitivity of RSCCT is 3.25 dB,0.81 dB and 0.25 dB higher than binary phase shift keying(BPSK)-like,SCPC and ASPeCT at the acquisition probability of 90%,respectively.The peak to average power ratio is 1.91,3.0 and 3.7 times higher than ASPeCT,SCPC and BPSK-like at SNR=–20 dB,respectively.For BOC(2n,n),the acquisition sensitivity of RSCCT is 5.5 dB,1.25 dB and 2.69 dB higher than BPSK-like,SCPC and ASPeCT at the acquisition probability of 90%,respectively.The peak to average power ratio is 1.02,1.68 and 2.12 times higher than ASPeCT,SCPC and BPSK-like at SNR=–20 dB,respectively.

Phase Transitions in q-States Signal Reconstruction

Compressed sensing is a new signal acquisition method that acquires signal in a compressed form and then recovers the signal by the use of computational tools and techniques.This means fewer measurements of signal are needed and thus it will save huge amount of time and storage space.We,in this paper,consider the compressed sensing of sparse integer-valued signal(referred as "q-states signal" throughout the paper).In order to accelerate the speed of reconstruction,we adopt the sparse rather than dense measurement matrices.Using methods and tools developed in statistical physics,we locate the reconstruction limit for L 0-reconstruction method and propose a belief propagationbased algorithm that can deal with instance with large size and its typical reconstruction performance are also analyzed.

RECONSTRUCT AZIMUTH SIGNAL AND SUPPRESS INTERBEAM AMBIGUITIES OF SPCMB SAR WITH HYBRID FILTERBANK

Conventional Synthetic Aperture Radar (SAR) systems cannot obtain high-resolution and wide-swath illumination area due to the well-known minimum antenna area constraint. Single Phase Center MultiBeam (SPCMB) technique can overcome this limitation by adding spatial sampling through multiple receivers in azimuth direction. Unfortunately, this approach will lead to an increase of azimuth ambiguities (interbeam ambiguities), because each receive beam’s mainlobe overlaps with the other ones’ sidelobes. This paper proves that the front part of SPCMB SAR systems can be considered to be a hybrid filterbank. Therefore, the azimuth signal can be reconstructed and the interbeam am- biguities can be effectively suppressed by a well-designed hybrid filterbank.

Application of Sensitivity Encoding Reconstruction for MRI with BOLD Signal

The work of this paper analyzes the performance of Sensitivity Encoding (SENSE) through actual data sets and determines the problem of computational efficiency. It corrects the error of the detection signal through the calibration function of the percentage signal change, and uses the three-dimensional sensor image reconstruction technology to calibrate the sensitivity of the blood to the magnetic change, enhances the sensitivity of the magnetic susceptibility gradient, and reduces the scanning time of the MRI experiment. The actual data set handles the image resolution. The performance and experimental results of SENSE are analyzed through actual data sets.

DOA estimation method for wideband signals by block sparse reconstruction

For the direction of arrival（DOA） estimation,traditional sparse reconstruction methods for wideband signals usually need many iteration times.For this problem,a new method for two-dimensional wideband signals based on block sparse reconstruction is proposed.First,a prolate spheroidal wave function（PSWF） is used to fit the wideband signals,then the block sparse reconstruction technology is employed for DOA estimation.The proposed method uses orthogonalization to choose the matching atoms,ensuring that the residual components correspond to the minimum absolute value.Meanwhile,the vectors obtained by iteration are back-disposed according to the corresponding atomic matching rules,so the extra atoms are abandoned in the course of iteration,and the residual components of current iteration are reduced.Thus the original sparse signals are reconstructed.The proposed method reduces iteration times comparing with the traditional reconstruction methods,and the estimation precision is better than the classical two-sided correlation transformation（TCT）algorithm when the snapshot is small or the signal-to-noise ratio（SNR） is low.

SELECTION OF PROPER EMBEDDING DIMENSION IN PHASE SPACE RECONSTRUCTION OF SPEECH SIGNALS

In phase space reconstruction of time series, the selection of embedding dimension is important. Based on the idea of checking the behavior of near neighbors in the reconstruction dimension, a new method to determine proper minimum embedding dimension is constructed. This method has a sound theoretical basis and can lead to good result. It can indicate the noise level in the data to be reconstructed, and estimate the reconstruction quality. It is applied to speech signal reconstruction and the generic embedding dimension of speech signals is deduced.

The Reconstructing of Low Signal-noise Ratio Single Ion Channel Signal from Patch-clamp Recordings Sampled in the Colored Background Noise

The single ion channel signal is an ionic current that can be recorded by the patch clamp technique. Hidden Markov model (HMM) algorithm has been used to convert the low signal noise ratio (SNR) noisy recording into an idealized quantal one in the case of white background noise. The traditional HMM algorithm is extended and adapted to the colored background noise. A new algorithm called EHMM (Extended HMM) algorithm is proposed, and mainly validated by simulation. Results show that it’s effective.

基于串并行双分支网络的冲击波信号重构方法

通过有限测点数据重建冲击波场内压力分布、通过残缺数据重构完整的冲击波压力曲线,对武器威力以及目标毁伤评估具有重要价值。针对爆炸冲击波信号重构问题,建立Res-GRU分支以串行方式捕捉冲击波超压信号局部时序依赖关系;建立Transformer分支以并行方式分析信号全局潜在特征;建立特征融合单元进行高阶特征融合,实现不同阶段信息逐层互补;进而构建了基于门控循环单元(gated recurrent unit,GRU)和Transformer模型的串并行双分支网络(G-TNet)。试验研究表明:G-TNet综合考量了信号的时序关系、数据变化规律等特征信息;在基于有限测点数据的冲击波场压力分布重构试验中,重建的模拟、实测超压数据与原始值之间均方误差(mean square error,MSE)分别为5.0×10^(-6)、1.2×10-3,平均峰值误差分别为0.49%、27.01%,平均正压时间误差分别为15.62%、15.91%,平均比冲量误差分别为17.66%、19.33%;在基于残缺数据的冲击波压力曲线重构试验中,重构的模拟、实测信号的缺失值与原始值之间MSE分别为5.0×10^(-6)和5.0×10^(-4),平均绝对误差(mean absolute error,MAE)分别为0.0010和0.0171;G-TNet重构结果优于主流方法,满足爆炸冲击波压力重构指标要求。

RECONSTRUCTION OF ONE DIMENSIONAL MULTI-LAYERED MEDIA BY USING A TIME DOMAIN SIGNAL FLOW GRAPH TECHNIQUE

A novel inverse scattering method to reconstruct the permittivity profile of one-dimensional multi-layered media is proposed in this paper.Based on the equivalent network ofthe medium,a concept of time domain signal flow graph and its basic principles are introduced,from which the reflection coefficient of the medium in time domain can be shown to be a series ofDirac δ-functions(pulse responses).In terms of the pulse responses,we will reconstruct both thepermittivity and the thickness of each layer will accurately be reconstructed.Numerical examplesverify the applicability of this