If Hall plates are used as magnetic field sensors they are usually powered up by a current source connected to a pair of non-neighboring contacts. The output voltage is tapped at another pair of non-neighboring contac...If Hall plates are used as magnetic field sensors they are usually powered up by a current source connected to a pair of non-neighboring contacts. The output voltage is tapped at another pair of non-neighboring contacts. In this paper we study more general operating conditions of Hall plates with an arbitrary number of contacts. In such hybrid operating modes current sources are connected to a first set of contacts and voltage sources to a second set of contacts. Output voltages are tapped at the first set of contacts and output currents are measured at the second set of contacts. All these output signals are multiplied by coefficients and added up. The purpose of this work is to figure out which operating mode and which Hall plate achieve maximum signal at minimum thermal noise and power dissipation. To this end we develop a theory, which gives the ratio of signal over noise and power as a function of the resistance matrix of Hall plates, of the supply voltages and currents, and of the coefficients. Optimization is done analytically in closed form and numerically for specific examples. The results are: 1) all operating modes have identical noise performance if their parameters are optimized;2) for any Hall plate one can measure its resistance matrix and insert its values into our formulae to obtain the optimum supply currents and coefficients for optimum noise performance.展开更多
The problem of optimal periodic pulse jamming design for a quadrature phase shift keying（QPSK）communication system is investigated.First a closed-form bit-error-rate（BER）of QPSK system under the jamming of pulse s...The problem of optimal periodic pulse jamming design for a quadrature phase shift keying（QPSK）communication system is investigated.First a closed-form bit-error-rate（BER）of QPSK system under the jamming of pulse signal is derived.Then the asymptotic performance of the derived BER is analyzed as the signal-to-noise ratio（SNR）grows to infinity.In order to maximize the BER of the QPSK system,the optimal parameters of periodic pulse jamming signal,including the duty cycle and signal-tojamming power ratio（SJR）,are found out.Numerical results are presented to verify our analytical results and the optimality of our design.展开更多
The effectiveness of optimizing electrical conductivity of carbon fiber/carbon nanotube （CNT）/epoxy hybrid composites via Taguchi method was demonstrated. CNTs were induced on carbon fabric by electrophoretic deposi...The effectiveness of optimizing electrical conductivity of carbon fiber/carbon nanotube （CNT）/epoxy hybrid composites via Taguchi method was demonstrated. CNTs were induced on carbon fabric by electrophoretic deposition （EPD） technique. The essential deposition parameters were identified as l） the deposition time, 2） the deposition voltage, 3） the mass fraction of CNTs in suspension, and 4） the distance between the electrodes. An experimental design was then performed to establish the appropriate levels for each factor. An orthogonal array of L9 （34） was designed to conduct the experiments. Electrical conductivity results were collected as the response. The relative influences of design parameters on the response were discussed. Using the model, signal to noise （S/N） ratio and response characteristics for the optimized deposition parameter combination were predicted. The results show clearly that the optimum condition of electrophoretic deposition （EPD） process improves the electrical conductivity of carbon/epoxy hybrid composites.展开更多
针对广域多点定位系统中接收信号信噪比(signal to noise ratio,SNR)低导致到达时间(time of arrival,TOA)提取不准确的问题,提出了一种匹配滤波结合非相干积累的联合TOA估计算法,该算法能够有效降低匹配滤波法在低SNR下TOA估计的均方...针对广域多点定位系统中接收信号信噪比(signal to noise ratio,SNR)低导致到达时间(time of arrival,TOA)提取不准确的问题,提出了一种匹配滤波结合非相干积累的联合TOA估计算法,该算法能够有效降低匹配滤波法在低SNR下TOA估计的均方根误差(root mean square error,RMSE).联合算法通过对二次雷达驻留时间内接收的应答信号的匹配滤波输出做非相干积累,在最大值点处标记时间戳进行TOA估计,利用能量累积原理提高SNR,从而使得估计精确度得以提升.仿真结果表明:该算法可在-15 dB SNR,53 MHz采样频率及9个积累信号时,达到24.302 ns的TOA估计精确度.所提联合TOA估计算法具有高精确度与高稳健性的特点,能够在-15~0 dB SNR将估计精确度提升至25 ns以下,为提取低SNR S模式信号TOA进而提升广域多点定位精确度提供了一种有效的方法.展开更多
文摘If Hall plates are used as magnetic field sensors they are usually powered up by a current source connected to a pair of non-neighboring contacts. The output voltage is tapped at another pair of non-neighboring contacts. In this paper we study more general operating conditions of Hall plates with an arbitrary number of contacts. In such hybrid operating modes current sources are connected to a first set of contacts and voltage sources to a second set of contacts. Output voltages are tapped at the first set of contacts and output currents are measured at the second set of contacts. All these output signals are multiplied by coefficients and added up. The purpose of this work is to figure out which operating mode and which Hall plate achieve maximum signal at minimum thermal noise and power dissipation. To this end we develop a theory, which gives the ratio of signal over noise and power as a function of the resistance matrix of Hall plates, of the supply voltages and currents, and of the coefficients. Optimization is done analytically in closed form and numerically for specific examples. The results are: 1) all operating modes have identical noise performance if their parameters are optimized;2) for any Hall plate one can measure its resistance matrix and insert its values into our formulae to obtain the optimum supply currents and coefficients for optimum noise performance.
基金Supported by the National Natural Science Foundation of China(61271258)
文摘The problem of optimal periodic pulse jamming design for a quadrature phase shift keying（QPSK）communication system is investigated.First a closed-form bit-error-rate（BER）of QPSK system under the jamming of pulse signal is derived.Then the asymptotic performance of the derived BER is analyzed as the signal-to-noise ratio（SNR）grows to infinity.In order to maximize the BER of the QPSK system,the optimal parameters of periodic pulse jamming signal,including the duty cycle and signal-tojamming power ratio（SJR）,are found out.Numerical results are presented to verify our analytical results and the optimality of our design.
基金Project supported by the Second Stage of Brain Korea 21 Projects and the National Research Foundation of Korea (2011-0030804) Funded by the Korea Government (MEST)
文摘The effectiveness of optimizing electrical conductivity of carbon fiber/carbon nanotube （CNT）/epoxy hybrid composites via Taguchi method was demonstrated. CNTs were induced on carbon fabric by electrophoretic deposition （EPD） technique. The essential deposition parameters were identified as l） the deposition time, 2） the deposition voltage, 3） the mass fraction of CNTs in suspension, and 4） the distance between the electrodes. An experimental design was then performed to establish the appropriate levels for each factor. An orthogonal array of L9 （34） was designed to conduct the experiments. Electrical conductivity results were collected as the response. The relative influences of design parameters on the response were discussed. Using the model, signal to noise （S/N） ratio and response characteristics for the optimized deposition parameter combination were predicted. The results show clearly that the optimum condition of electrophoretic deposition （EPD） process improves the electrical conductivity of carbon/epoxy hybrid composites.
文摘针对广域多点定位系统中接收信号信噪比(signal to noise ratio,SNR)低导致到达时间(time of arrival,TOA)提取不准确的问题,提出了一种匹配滤波结合非相干积累的联合TOA估计算法,该算法能够有效降低匹配滤波法在低SNR下TOA估计的均方根误差(root mean square error,RMSE).联合算法通过对二次雷达驻留时间内接收的应答信号的匹配滤波输出做非相干积累,在最大值点处标记时间戳进行TOA估计,利用能量累积原理提高SNR,从而使得估计精确度得以提升.仿真结果表明:该算法可在-15 dB SNR,53 MHz采样频率及9个积累信号时,达到24.302 ns的TOA估计精确度.所提联合TOA估计算法具有高精确度与高稳健性的特点,能够在-15~0 dB SNR将估计精确度提升至25 ns以下,为提取低SNR S模式信号TOA进而提升广域多点定位精确度提供了一种有效的方法.
