Uniform crystalline TiO2 thin films were coated on silica glass fibers by liquid phase deposition from aqueous solution of ammonium hexafluorotitanate at low temperature. TiO2 thin films and nanopowders were prepared ...Uniform crystalline TiO2 thin films were coated on silica glass fibers by liquid phase deposition from aqueous solution of ammonium hexafluorotitanate at low temperature. TiO2 thin films and nanopowders were prepared by adding H3BO3 into (NH4)2TiF6 solution supersaturated with anatase nano-crystalline TiO2 at 40 ℃. The effects of the deposition conditions on the surface morphology, section morphology, thickness of the deposited TiO2 thin films were investigated. The results indicate that the growth rate and particle size of the thin films were controlled by both the deposition conditions and the amount of anatase nano-crystalline TiO2.展开更多
An asymmetric heating method for fusion splicing of 1 060-XP silica fiber (1 060F) and phosphate glass fiber (PGF) using an electric arc splicer has been proposed. Double joints with the lowest splice loss of 0.6 ...An asymmetric heating method for fusion splicing of 1 060-XP silica fiber (1 060F) and phosphate glass fiber (PGF) using an electric arc splicer has been proposed. Double joints with the lowest splice loss of 0.6 dB and good bending-resist strength between 1 060 F and PGF has been obtained. The main reasons affecting fiber splice loss and strength have been analyzed.展开更多
Nano-silica treated with different kinds of coupling agent (KH550, A-143, A-151) was used to modify the surface condition of glass fiber, and then, the modified glass fiber/unsaturated polyester resin (UPR) compos...Nano-silica treated with different kinds of coupling agent (KH550, A-143, A-151) was used to modify the surface condition of glass fiber, and then, the modified glass fiber/unsaturated polyester resin (UPR) composites materials were prepared. Scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), and impact test were used to characterize the composite materials' structure and properties. The morphology of composite materials shows that the adhesion between nano-silica and glass fiber is improved when silane coupling agent is added in. The DMA and impact test results show that silane coupling agent (especially KH550 and A-151) could effectively improve the composite's mechanical properties. When the dose of KH550 was 0.1% (m : m), the storage modulus and impact strength reached the maximum.展开更多
文摘Uniform crystalline TiO2 thin films were coated on silica glass fibers by liquid phase deposition from aqueous solution of ammonium hexafluorotitanate at low temperature. TiO2 thin films and nanopowders were prepared by adding H3BO3 into (NH4)2TiF6 solution supersaturated with anatase nano-crystalline TiO2 at 40 ℃. The effects of the deposition conditions on the surface morphology, section morphology, thickness of the deposited TiO2 thin films were investigated. The results indicate that the growth rate and particle size of the thin films were controlled by both the deposition conditions and the amount of anatase nano-crystalline TiO2.
基金Funded by the Guangdong Science and Technology Program (No.2005A10602001)the Guangzhou Science and Technology Program (No.2006Z2-D0161)the Program for New Century Excellent Talents (No.NCET-04-0821)
文摘An asymmetric heating method for fusion splicing of 1 060-XP silica fiber (1 060F) and phosphate glass fiber (PGF) using an electric arc splicer has been proposed. Double joints with the lowest splice loss of 0.6 dB and good bending-resist strength between 1 060 F and PGF has been obtained. The main reasons affecting fiber splice loss and strength have been analyzed.
基金Supported by the National Natural Science Foundation of of China(J1210061)
文摘Nano-silica treated with different kinds of coupling agent (KH550, A-143, A-151) was used to modify the surface condition of glass fiber, and then, the modified glass fiber/unsaturated polyester resin (UPR) composites materials were prepared. Scanning electron microscopy (SEM), dynamic mechanical analysis (DMA), and impact test were used to characterize the composite materials' structure and properties. The morphology of composite materials shows that the adhesion between nano-silica and glass fiber is improved when silane coupling agent is added in. The DMA and impact test results show that silane coupling agent (especially KH550 and A-151) could effectively improve the composite's mechanical properties. When the dose of KH550 was 0.1% (m : m), the storage modulus and impact strength reached the maximum.