The effect of Al2O3 on the Cu-ZnO-Al2O3-SiO2 catalysts prepared by a pseudo sol-gel method has been investigated and these catalysts were characterized by XRD, H2-TPR, XPS, NH3-TPD and CO2- TPD techniques. As revealed...The effect of Al2O3 on the Cu-ZnO-Al2O3-SiO2 catalysts prepared by a pseudo sol-gel method has been investigated and these catalysts were characterized by XRD, H2-TPR, XPS, NH3-TPD and CO2- TPD techniques. As revealed by XRD and H2-TPR, the added alumina produces high dispersion of CuO and makes the reduction of CuO difficult. XPS analysis detects a remarkably high Al^3＋ enrichment at the surface of calcined samples, along with a decrease of Eb of Cu 2p3/2, which confirms the Cu-Al interaction. Another important role of Al203 would be to incorporate into the SiO2 structure to form the acid-base sites for ether formation. The reaction results shows that the addition of Al2O3 exhibits a promoting effect on the CO2 conversion only when its content is below 1.4%, and an optimal DME selectivity is obtained when 4.0%Al2O3 is added, indicating a better ＇synergistic effect＇ is present between the methanol forming component and the acidic component in bifunctional catalysts. Possible relationship between the catalytic activity and the Cu-Al interaction as well as the surface acidity is discussed.展开更多
Practical application of a Si anode in a high-energy-density battery cannot be achieved due to the huge volume expansion of these anodes.Researchers have focused on binders of the anode to restrict volume expansion in...Practical application of a Si anode in a high-energy-density battery cannot be achieved due to the huge volume expansion of these anodes.Researchers have focused on binders of the anode to restrict volume expansion in order to address this issue,as the hydrogen bonds and mechanical properties of binders can be used to enhance adhesion and accommodate the volume changes of a Si anode.Herein,we comprehensively consider binders’hydrogen bonds,mechanical properties,stability,and compatibility with the electrolyte solution,and design an ether-/ester-/fluorine-rich composite polymer,named P(TFEMAco-IBVE).The proposed binder formula possesses outstanding stability,adhesion,and mechanical strength;moreover,it can accommodate the dramatic volume changes of a Si electrode and exhibits excellent electrochemical performance,achieving a high areal capacity of about 5.4 mA·h·cm^(-2).This novel polymer design may be applied to other electrode materials in the next generation of lithium-ion batteries.展开更多
文摘The effect of Al2O3 on the Cu-ZnO-Al2O3-SiO2 catalysts prepared by a pseudo sol-gel method has been investigated and these catalysts were characterized by XRD, H2-TPR, XPS, NH3-TPD and CO2- TPD techniques. As revealed by XRD and H2-TPR, the added alumina produces high dispersion of CuO and makes the reduction of CuO difficult. XPS analysis detects a remarkably high Al^3＋ enrichment at the surface of calcined samples, along with a decrease of Eb of Cu 2p3/2, which confirms the Cu-Al interaction. Another important role of Al203 would be to incorporate into the SiO2 structure to form the acid-base sites for ether formation. The reaction results shows that the addition of Al2O3 exhibits a promoting effect on the CO2 conversion only when its content is below 1.4%, and an optimal DME selectivity is obtained when 4.0%Al2O3 is added, indicating a better ＇synergistic effect＇ is present between the methanol forming component and the acidic component in bifunctional catalysts. Possible relationship between the catalytic activity and the Cu-Al interaction as well as the surface acidity is discussed.
基金This study was supported by funding from the National Key Research and Development Program of China(2018YFB0104300)the Key Project of the Sichuan Science and Technology Department(2018GZ0546).
文摘Practical application of a Si anode in a high-energy-density battery cannot be achieved due to the huge volume expansion of these anodes.Researchers have focused on binders of the anode to restrict volume expansion in order to address this issue,as the hydrogen bonds and mechanical properties of binders can be used to enhance adhesion and accommodate the volume changes of a Si anode.Herein,we comprehensively consider binders’hydrogen bonds,mechanical properties,stability,and compatibility with the electrolyte solution,and design an ether-/ester-/fluorine-rich composite polymer,named P(TFEMAco-IBVE).The proposed binder formula possesses outstanding stability,adhesion,and mechanical strength;moreover,it can accommodate the dramatic volume changes of a Si electrode and exhibits excellent electrochemical performance,achieving a high areal capacity of about 5.4 mA·h·cm^(-2).This novel polymer design may be applied to other electrode materials in the next generation of lithium-ion batteries.
