To develop an efficient and bio-compatible way to improve the thermal and mechanical properties of addition type liquid silicone rubber（LSR）, a series of modified LSR samples were prepared by introducing octavinyl-p...To develop an efficient and bio-compatible way to improve the thermal and mechanical properties of addition type liquid silicone rubber（LSR）, a series of modified LSR samples were prepared by introducing octavinyl-polyhedral oligosilsesquioxanes（VPOSS） and high purity silicon sol singly or in combination before vulcanization. Significant correlation was found between the loading rate of VPOSS and thermal properties. However, mechanical properties were negatively correlated with VPOSS content within the range experimented, which may be ascribed to material defect caused by uneven distribution and aggregation. Furthermore, test results approved that the introducing of silicon sol indeed affected the stabilities of the polymer by restraining the material defect caused by the aggregation of POSS molecules and improving cross link density. For example, adding 10%-20% of silicon sol into VPOSS（1.0%） modified LSR will increase tear resistance by 43.9%-85.7%, elongation at break by 31.7%-57.3%, residue at 800 ℃ in N2 atmosphere by 32.0%-37.9%, residue at 650 ℃ in air atmosphere by 70.9%-91.6%, respectively. This work proves that, to incorporate VPOSS into LSR by hydrosilylation, and to use silicon sol as dispersant and reinforce filler can become an efficient way to improve the mechanical property, thermal stability and bio-compatibility of LSR in the future.展开更多
A new SOI （Silicon On Insulator） high voltage device with Step Unmovable Surface Charges （SUSC） of buried oxide layer and its analytical breakdown model are proposed in the paper. The unmovable charges are impleme...A new SOI （Silicon On Insulator） high voltage device with Step Unmovable Surface Charges （SUSC） of buried oxide layer and its analytical breakdown model are proposed in the paper. The unmovable charges are implemented into the upper surface of buried oxide layer to increase the vertical electric field and uniform the lateral one. The 2-D Poisson＇s equation is solved to demonstrate the modulation effect of the immobile interface charges and analyze the electric field and breakdown voltage with the various geometric parameters and step numbers. A new RESURF （REduce SURface Field） condition of the SOl device considering the interface charges and buried oxide is derived to maximize breakdown voltage. The analytical results are in good agreement with the numerical analysis obtained by the 2-D semiconductor devices simulator MEDICI. As a result, an 1200V breakdown voltage is firstly obtained in 3pro-thick top Si layer, 2pro-thick buried oxide layer and 70pro-length drift region using a linear doping profile of unmovable buried oxide charges.展开更多
There have been few reports concerning the hydrothermal synthesis of silicon anode materials. In this manuscript, starting from the very cheap silica sol, we hydrothermally prepared porous silicon nanospheres in an au...There have been few reports concerning the hydrothermal synthesis of silicon anode materials. In this manuscript, starting from the very cheap silica sol, we hydrothermally prepared porous silicon nanospheres in an autoclave at 180 ℃. As anode materials for lithium-ion batteries （LIBs）, the as-prepared nano-silicon anode without any carbon coating delivers a high reversible specific capacity of 2,650 mAh·g^-1 at 0.36 A·g^-1 and a significant cycling stability of about 950 mAh·g^-1 at 3.6 A·g^-1 during 500 cycles.展开更多
基金Funded by the National Natural Science Foundation of China(No.31170558)
文摘To develop an efficient and bio-compatible way to improve the thermal and mechanical properties of addition type liquid silicone rubber（LSR）, a series of modified LSR samples were prepared by introducing octavinyl-polyhedral oligosilsesquioxanes（VPOSS） and high purity silicon sol singly or in combination before vulcanization. Significant correlation was found between the loading rate of VPOSS and thermal properties. However, mechanical properties were negatively correlated with VPOSS content within the range experimented, which may be ascribed to material defect caused by uneven distribution and aggregation. Furthermore, test results approved that the introducing of silicon sol indeed affected the stabilities of the polymer by restraining the material defect caused by the aggregation of POSS molecules and improving cross link density. For example, adding 10%-20% of silicon sol into VPOSS（1.0%） modified LSR will increase tear resistance by 43.9%-85.7%, elongation at break by 31.7%-57.3%, residue at 800 ℃ in N2 atmosphere by 32.0%-37.9%, residue at 650 ℃ in air atmosphere by 70.9%-91.6%, respectively. This work proves that, to incorporate VPOSS into LSR by hydrosilylation, and to use silicon sol as dispersant and reinforce filler can become an efficient way to improve the mechanical property, thermal stability and bio-compatibility of LSR in the future.
基金Supported by the National Natural Science Foundation of China (No.60276040).
文摘A new SOI （Silicon On Insulator） high voltage device with Step Unmovable Surface Charges （SUSC） of buried oxide layer and its analytical breakdown model are proposed in the paper. The unmovable charges are implemented into the upper surface of buried oxide layer to increase the vertical electric field and uniform the lateral one. The 2-D Poisson＇s equation is solved to demonstrate the modulation effect of the immobile interface charges and analyze the electric field and breakdown voltage with the various geometric parameters and step numbers. A new RESURF （REduce SURface Field） condition of the SOl device considering the interface charges and buried oxide is derived to maximize breakdown voltage. The analytical results are in good agreement with the numerical analysis obtained by the 2-D semiconductor devices simulator MEDICI. As a result, an 1200V breakdown voltage is firstly obtained in 3pro-thick top Si layer, 2pro-thick buried oxide layer and 70pro-length drift region using a linear doping profile of unmovable buried oxide charges.
文摘There have been few reports concerning the hydrothermal synthesis of silicon anode materials. In this manuscript, starting from the very cheap silica sol, we hydrothermally prepared porous silicon nanospheres in an autoclave at 180 ℃. As anode materials for lithium-ion batteries （LIBs）, the as-prepared nano-silicon anode without any carbon coating delivers a high reversible specific capacity of 2,650 mAh·g^-1 at 0.36 A·g^-1 and a significant cycling stability of about 950 mAh·g^-1 at 3.6 A·g^-1 during 500 cycles.
