Constructing high-toughness polyimide binder with robust polarity and ion-conductive mechanisms ensuring long-term operational stability of silicon-based anodes

Silicon-based materials have demonstrated remarkable potential in high-energy-density batteries owing to their high theoretical capacity.However,the significant volume expansion of silicon seriously hinders its utilization as a lithium-ion anode.Herein,a functionalized high-toughness polyimide(PDMI) is synthesized by copolymerizing the 4,4'-Oxydiphthalic anhydride(ODPA) with 4,4'-oxydianiline(ODA),2,3-diaminobenzoic acid(DABA),and 1,3-bis(3-aminopropyl)-tetramethyl disiloxane(DMS).The combination of rigid benzene rings and flexible oxygen groups(-O-) in the PDMI molecular chain via a rigidness/softness coupling mechanism contributes to high toughness.The plentiful polar carboxyl(-COOH) groups establish robust bonding strength.Rapid ionic transport is achieved by incorporating the flexible siloxane segment(Si-O-Si),which imparts high molecular chain motility and augments free volume holes to facilitate lithium-ion transport(9.8 × 10^(-10) cm^(2) s^(-1) vs.16 × 10^(-10) cm^(2) s~(-1)).As expected,the SiO_x@PDMI-1.5 electrode delivers brilliant long-term cycle performance with a remarkable capacity retention of 85% over 500 cycles at 1.3 A g^(-1).The well-designed functionalized polyimide also significantly enhances the electrochemical properties of Si nanoparticles electrode.Meanwhile,the assembled SiO_x@PDMI-1.5/NCM811 full cell delivers a high retention of 80% after 100 cycles.The perspective of the binder design strategy based on polyimide modification delivers a novel path toward high-capacity electrodes for high-energy-density batteries.

Silicon-based optoelectronic heterogeneous integration for optical interconnection

The performance of optical interconnection has improved dramatically in recent years.Silicon-based optoelectronic heterogeneous integration is the key enabler to achieve high performance optical interconnection,which not only provides the optical gain which is absent from native Si substrates and enables complete photonic functionalities on chip,but also improves the system performance through advanced heterogeneous integrated packaging.This paper reviews recent progress of silicon-based optoelectronic heterogeneous integration in high performance optical interconnection.The research status,development trend and application of ultra-low loss optical waveguides,high-speed detectors,high-speed modulators,lasers and 2D,2.5D,3D and monolithic integration are focused on.

Regulating the Solvation Structure of Li^(+) Enables Chemical Prelithiation of Silicon-Based Anodes Toward High-Energy Lithium-Ion Batteries

The solvation structure of Li^(+) in chemical prelithiation reagent plays a key role in improving the low initial Coulombic efficiency(ICE) and poor cycle performance of silicon-based materials. Never theless, the chemical prelithiation agent is difficult to dope active Li^(+) in silicon-based anodes because of their low working voltage and sluggish Li^(+) diffusion rate. By selecting the lithium–arene complex reagent with 4-methylbiphenyl as an anion ligand and 2-methyltetrahydrofuran as a solvent, the as-prepared micro-sized Si O/C anode can achieve an ICE of nearly 100%. Interestingly, the best prelithium efficiency does not correspond to the lowest redox half-potential(E_(1/2)), and the prelithiation efficiency is determined by the specific influencing factors(E_(1/2), Li^(+) concentration, desolvation energy, and ion diffusion path). In addition, molecular dynamics simulations demonstrate that the ideal prelithiation efficiency can be achieved by choosing appropriate anion ligand and solvent to regulate the solvation structure of Li^(+). Furthermore, the positive effect of prelithiation on cycle performance has been verified by using an in-situ electrochemical dilatometry and solid electrolyte interphase film characterizations.

Research Towards Terahertz Power Amplifiers in Silicon-Based Process

In view of the existing design challenges for Terahertz(THz)power amplifiers(PAs),the common design methods and the efforts of the State Key Laboratory of Millimeter Wave,Southeast University,China in the development of silicon-based THz PAs,mainly including silicon-based PAs with operating frequencies covering 100–300 GHz,are summarized in this paper.Particularly,we design an LC-balun-based two-stage differential cascode PA with a center frequency of 150 GHz and an output power of 14 dBm.Based on a Marchand balun,we report a 220 GHz three-stage differential cascode PA with a saturated output power of 9.5 dBm.To further increase the output power of THz PA,based on a four-way differential power combining technique,we report a 211–263 GHz dual-LC-tank-based broadband PA with a recorded 14.7 dBm Psat and 16.4 dB peak gain.All the above circuits are designed in a standard 130 nm silicon germanium(SiGe)BiCMOS process.

Multifunctional silicon-based light emitting device in standard complementary metal oxide semiconductor technology

A three-terminal silicon-based light emitting device is proposed and fabricated in standard 0.35 μm complementary metal-oxide-semiconductor technology. This device is capable of versatile working modes： it can emit visible to near infra-red （NIR） light （the spectrum ranges from 500 nm to 1000 nm） in reverse bias avalanche breakdown mode with working voltage between 8.35 V-12 V and emit NIR light （the spectrum ranges from 900 nm to 1300 nm） in the forward injection mode with working voltage below 2 V. An apparent modulation effect on the light intensity from the polysilicon gate is observed in the forward injection mode. Furthermore, when the gate oxide is broken down, NIR light is emitted from the polysilicon/oxide/silicon structure. Optoelectronic characteristics of the device working in different modes are measured and compared. The mechanisms behind these different emissions are explored.

Micro-Mechanism of Silicon-Based Waveguide Surface Smoothing in Hydrogen Annealing

The micro-mechanism of the silicon-based waveguide surface smoothing is investigated systematically to explore the effects of silicon-hydrogen bonds on high-temperature hydrogen annealing waveguides. The effect of silicon- hydrogen bonds on the surface migration movement of silicon atoms and the waveguide surface topography are revealed. The micro-migration from an upper state to a lower state of silicon atoms is driven by silicon- hydrogen bonding, which is the key to ameliorate the rough surface morphology of the silicon-based waveguide. The process of hydrogen annealing is experimentally validated based on the simulated parameters. The surface roughness declines from 1.523nm to 0.461 nm.

Design Technologies for Silicon-Based High-Efficiency RF Power Amplifiers:A Brief Overview

This paper presents a brief overview of several promising design technologies for high efficiency silicon-based radio frequency （RF） power amplifiers （PAs） as well as the use of these technologies in mobile broadband wireless communications. Four important aspects of PA design are addressed in this paper. First, we look at class-E PA design equations and provide an example of a class-E PA that achieves efficiency of 65-70% at 2.4 GHz. Then, we discuss state-of-the-art envelope tracking （ET） design for monolithic wideband RF mobile transmitter applications. A brief overview of Doherty PA design for the next-generation wireless handset applications is then given. Towards the end of the paper, we discuss an inherently broadband and highly efficient class-J PA design targeting future multi-band multi-standard wireless communication protocols.

Low insertion loss silicon-based spatial light modulator with high reflective materials outside Fabry–Perot cavity

The extinction ratio and insertion loss of spatial light modulator are subject to the material problem, thus limiting its applications. One reflection-type silicon-based spatial light modulator with high reflective materials outside the Fabry-Perot cavity is demonstrated in this paper. The reflectivity values of the outside-cavity materials with different film layer numbers are simulated. The reflectivity values of 6-pair Ta2O5/SiO2 films at 1550 nm are experimentally verified to be as high as 99.9%. The surfaces of 6-pair Ta2O5/SiO2 films are smooth: their root-mean-square roughness values are as small as 0.53 nm. The insertion loss of the device at 1550 nm is only 1.2 dB. The high extinction ratio of the device at 1550 nm and 11 V is achieved to be 29.7 dB. The spatial light modulator has a high extinction ratio and low insertion loss for applications.

High-performing silicon-based germanium Schottky photodetector with ITO transparent electrode

A near-infrared germanium(Ge)Schottky photodetector(PD)with an ultrathin silicon(Si)barrier enhancement layer between the indium-doped tin oxide(ITO)electrode and Ge epilayer on Si or silicon-on-insulator(SOI)is proposed and fabricated.The well-behaved ITO/Si cap/Ge Schottky junctions without intentional doping process for the Ge epilayer are formed on the Si and SOI substrates.The Si-and SOI-based ITO/Si cap/Ge Schottky PDs exhibit low dark current densities of 33 mA/cm2 and 44 mA/cm2,respectively.Benefited from the high transmissivity of ITO electrode and the reflectivity of SOI substrate,an optical responsivity of 0.19 A/W at 1550 nm wavelength is obtained for the SOI-based ITO/Si cap/Ge Schottky PD.These complementary metal–oxide–semiconductor(CMOS)compatible Si(or SOI)-based ITO/Si cap/Ge Schottky PDs are quite useful for detecting near-infrared wavelengths with high efficiency.

Modification of methyl oleate for silicon-based biological lubricating base oil

A new kind of silicon-based biological lubricating base oil with good viscosity-temperature behavior,viscosity index,thermostability,oxidation stability and wear resistance performance was synthesized as a derivative of methyl oleate.Trimethylsilylation reaction was introduced to further improve methyl oleate oxidation stability and lubricity after epoxidation and open-ring reactions.The order of effectiveness of acid binding agent was N,N-diisopropylethylamine(DIEA) > pyridine > diethylamine > triethylamine,and the effects of various parameters on the trimethylsilylation reaction as well as on the silicon-oxygen bond stability and reaction yield were studied.A maximum yield of 34.54%was achieved at hydroxyl/trimethyl chlorosilane/DIEA molar ratio of1:1.25:1,reaction temperature 40℃,reaction time 1.5 h.

Comparison of commercial silicon-based anode materials for the design of a high-energy lithium-ion battery

Silicon(Si)is considered a potential alternative anode for next-generation Li-ion batteries owing to its high theoretical capacity and abundance.However,the commercial use of Si anodes is hindered by their large volume expansion(~300%).Numerous efforts have been made to address this issue.Among these efforts,Si-graphite co-utilization has attracted attention as a reasonable alternative for high-energy anodes.A comparative study of representative commercial Si-based materials,such as Si nanoparticles,Si suboxides,and Si−Graphite composites(SiGC),was conducted to characterize their overall performance in high-energy lithium-ion battery(LIB)design by incorporating conventional graphite.Nano-Si was found to exhibit poor electrochemical performance,with severe volume expansion during cycling.Si suboxide provided excellent cycling stability in a full-cell evaluation with stable volume variation after 50 cycles,but had a large irreversible capacity and remarkable volume expansion during the first cycle.SiGC displayed a good initial Coulombic efficiency and the lowest volume change in the first cycle owing to the uniformly distributed nano-Si layer on graphite;however,its long-term cycling stability was relatively poor.To complement each disadvantage of Si suboxide and SiGC,a new combination of these Si-based anodes was suggested and a reasonable improvement in overall battery performance was successfully achieved.

Silicon-based four-mode division multiplexing for chip-scale optical data transmission in the 2 μm waveband

Based on a silicon platform, we design and fabricate a four-mode division(de)multiplexer for chip-scale optical data transmission in the 2 μm waveband for the first time, to the best of our knowledge. The(de)multiplexer is composed of three tapered directional couplers for both mode multiplexing and demultiplexing processes. In the experiment, the average crosstalk for four channels is measured to be less than-18 dB over a wide wavelength range(70 nm) from 1950 to 2020 nm, and the insertion losses are also assessed. Moreover, we further demonstrate stable 5 Gbit/s direct modulation data transmission through the fabricated silicon photonic devices with nonreturn-to-zero on–off keying signals. The experimental results show clear eye diagrams, and the penalties at a bit error rate of 3.8 × 10-3 are all less than 2.5 dB after on-chip data transmission. The obtained results indicate that the presented silicon four-mode division multiplexer in the mid-infrared wavelength band might be a promising candidate facilitating chip-scale high-speed optical interconnects.

Influence of Al-doping on electroluminescence of silicon-based films

A series of Al-doped silicon-rich silica (AlSiO) composite films have been prepared by a dual ion beam co-sputtering method with a Al, Si and SiO2 composite target. The content of Al and Si in the films can be adjusted by changing the surface area of Al and Si of the target. Visible electroluminescence (EL) from the samples is found to have only one luminescence band peaked at 510 nm (2.4 eV). Experimental results show that the doping of Al is beneficial to reducing the onset voltage and to increasing the intensity of EL.

A Silicon-based Imidazolium Ionic Liquid Iodide Source for Dye-Sensitized Solar Cells

Room temperature molten salt 1-methyl-3-（trimethylsilyl）methyl-imidazolium iodide （MSII） was used for io-dide sources in dye-sensitized solar cells with an organic sensitizer 2-cyano-3-[5-[4-[3-[4-（4-（N,N-bis（4-methoxy-phenyl）amino）phenyl）phenyl]-2,5-di-n-butyl-pyrrolo[3,4-c]pyrrole-1,4-dione]phenyl] furan-2-yl] acrylic acid （DPP-I） as light harvester. With an optimized electrolyte （MSII ： I2 ： BI ： GuNCS=24 ： 2 ： 2 ： 0.4, BI and GuCNS are short for benzimidazole and guanidine thiocyanate, respectively）, photovoltaic parameters （Jsc, Voc, and ff） of device are 8.97 mA·cm^-2, 600 mV and 0.61, respectively, yielding a maximum overall photo-to-energy con-version efficiency （17） of 3.23%. And then the charge-transfer mechanism of devices was deeply analyzed with elec- trochemical impedance spectroscopy （EIS） in the dark.

Silicon-based optoelectronics for general-purpose matrix computation:a review

Conventional electronic processors,which are the mainstream and almost invincible hardware for computation,are approaching their limits in both computational power and energy efficiency,especially in large-scale matrix computation.By combining electronic,photonic,and optoelectronic devices and circuits together,silicon-based optoelectronic matrix computation has been demonstrating great capabilities and feasibilities.Matrix computation is one of the few general-purpose computations that have the potential to exceed the computation performance of digital logic circuits in energy efficiency,computational power,and latency.Moreover,electronic processors also suffer from the tremendous energy consumption of the digital transceiver circuits during high-capacity data interconnections.We review the recent progress in photonic matrix computation,including matrix-vector multiplication,convolution,and multiply–accumulate operations in artificial neural networks,quantum information processing,combinatorial optimization,and compressed sensing,with particular attention paid to energy consumption.We also summarize the advantages of siliconbased optoelectronic matrix computation in data interconnections and photonic-electronic integration over conventional optical computing processors.Looking toward the future of silicon-based optoelectronic matrix computations,we believe that silicon-based optoelectronics is a promising and comprehensive platform for disruptively improving general-purpose matrix computation performance in the post-Moore’s law era.

A composite insulation structure for silicon-based planar neuroprobes

Silicon-based planar neuroprobes are composed of silicon substrate,conducting layer,and insulation layers of SiO 2 or SiN membrane.The insulation layer is very important because it affects many key parameters of neuprobes,like impedance,SNR(signal noise ratio),reliability,etc.Monolayer membrane of SiO 2 or SiN are not good choices for insulation layer,since defects and residual stress in these layers can induce bad passivation.In this paper a composite insulation structure is studied,with thermal SiO 2 as the lower insulation layer and with multilayer membrane composed of PECVD SiO 2 and SiN as the upper insulation layer.This structure not only solves the problem of residual stress but also ensures a good probe passivation.So it's a good choice for insulation layer of neuroprobes.

一种基于硅基MEMS三维异构集成技术的T/R组件

基于硅基微电子机械系统(MEMS)三维异构集成工艺,设计并制作了用于相控阵天线系统的三维堆叠式Ku波段双通道T/R组件。该组件由两层硅基结构通过球栅阵列(BGA)植球堆叠而成,上下两层硅基封装均采用5层硅片通过硅通孔(TSV)、晶圆级键合工艺实现。组件集成了六位数控移相、六位数控衰减、串转并、电源调制、逻辑控制等功能,最终组件尺寸仅为15 mm×8 mm×3.8 mm。测试结果表明,在Ku波段内,该组件发射通道饱和输出功率大于24 dBm,单通道发射增益大于20 dB,接收通道增益大于20 dB,噪声系数小于3.0 dB。该组件性能好,质量轻,体积小,加工精确度高,组装效率高。

一种三维集成的Ku波段高功率T/R模块

基于硅基微电子机械系统(MEMS)三维(3D)异构集成工艺,设计并制作了用于相控阵天线系统的三维堆叠式Ku波段四通道高功率收发(T/R)模块。该模块由两层硅基封装堆叠而成,层间采用球栅阵列(BGA)植球堆叠,实现模块小型化;采用高低阻抗匹配建模,保证低损耗输出,采用导热垫加微流道散热板达到了良好的散热效果,实现模块高功率输出;对模块的微波垂直互连结构和散热进行建模和仿真。测试结果表明,在14~18 GHz内发射通道饱和输出功率大于40 dBm,接收通道增益大于21 dB,噪声系数小于3.5 dB,模块尺寸仅为14.0 mm×14.0 mm×3.3 mm。该模块在兼顾高集成度的同时性能指标得到了进一步提升。

Electric field dependence of spin qubit in a Si-MOS quantum dot

Valley, the intrinsic feature of silicon, is an inescapable subject in silicon-based quantum computing. At the spin–valley hotspot, both Rabi frequency and state relaxation rate are significantly enhanced. With protection against charge noise, the valley degree of freedom is also conceived to encode a qubit to realize noise-resistant quantum computing.Here, based on the spin qubit composed of one or three electrons, we characterize the intrinsic properties of valley in an isotopically enriched silicon quantum dot(QD) device. For one-electron qubit, we measure two electric-dipole spin resonance(EDSR) signals which are attributed to partial occupation of two valley states. The resonance frequencies of two EDSR signals have opposite electric field dependences. Moreover, we characterize the electric field dependence of the upper valley state based on three-electron qubit experiments. The difference of electric field dependences of the two valleys is 52.02 MHz/V, which is beneficial for tuning qubit frequency to meet different experimental requirements. As an extension of electrical control spin qubits, the opposite electric field dependence is crucial for qubit addressability,individual single-qubit control and two-qubit gate approaches in scalable quantum computing.

纳米流体和两性表面活性剂改善钻井液性能实验研究

本文研究了碳化硅纳米流体和表面活性剂对水基钻井液物理和化学性质(热稳定性、黏度、表面张力和滤失特性)的影响。将碳化硅纳米流体、表面活性剂溶液和水基钻井液混合形成表面活性剂——碳化硅(Si C)钻井液,分别用流变仪、张力仪和压滤机对混合钻井液的黏度、表面张力和滤失性等性质进行了研究。实验结果表明,与常规表面活性剂相比,两性表面活性剂对钻井液黏度的增量最大,此外,混合钻井液具有更好的热稳定性,随着温度的升高,黏度平均变化率为9%,表面张力和滤失性分别下降了31.0%和22.2%。