This research study quantifies the PM<sub>10</sub> emission rates (g/s) from cement silos in 25 concrete batching facilities for both controlled and uncontrolled scenarios by applying the USEPA AP-42 guide...This research study quantifies the PM<sub>10</sub> emission rates (g/s) from cement silos in 25 concrete batching facilities for both controlled and uncontrolled scenarios by applying the USEPA AP-42 guidelines step-by-step approach. The study focuses on evaluating the potential environmental impact of cement dust fugitive emissions from 176 cement silos located in 25 concrete batching facilities in the M35 Mussafah industrial area of Abu Dhabi, UAE. Emission factors are crucial for quantifying the PM<sub>10</sub> emission rates (g/s) that support developing source-specific emission estimates for areawide inventories to identify major sources of pollution that provide screening sources for compliance monitoring and air dispersion modeling. This requires data to be collected involves information on production, raw material usage, energy consumption, and process-related details, this was obtained using various methods, including field visits, surveys, and interviews with facility representatives to calculate emission rates accurately. Statistical analysis was conducted on cement consumption and emission rates for controlled and uncontrolled sources of the targeted facilities. The data shows that the average cement consumption among the facilities is approximately 88,160 (MT/yr), with a wide range of variation depending on the facility size and production rate. The emission rates from controlled sources have an average of 4.752E<sup>-04</sup> (g/s), while the rates from uncontrolled sources average 0.6716 (g/s). The analysis shows a significant statistical relationship (p < 0.05) and perfect positive correlation (r = 1) between cement consumption and emission rates, indicating that as cement consumption increases, emission rates tend to increase as well. Furthermore, comparing the emission rates from controlled and uncontrolled scenarios. The data showed a significant difference between the two scenarios, highlighting the effectiveness of control measures in reducing PM<sub>10</sub> emissions. The study’s findings provide insights into the impact of cement silo emissions on air quality and the importance of implementing control measures in concrete batching facilities. The comparative analysis contributes to understanding emission sources and supports the development of pollution control strategies in the Ready-Mix industry.展开更多
Silos are strategical structures used to stockpile various types of granular materials.They are highly vulnerable to earthquake excitation and have been frequently reported to fail at a higher rate than any other indu...Silos are strategical structures used to stockpile various types of granular materials.They are highly vulnerable to earthquake excitation and have been frequently reported to fail at a higher rate than any other industrial structure.The seismic response of silos within the near-fault region will suffer a complex combination of loadings due to the unique characteristics of the near-fault ground motions;which are usually associated with a large amplitude pulse at the beginning of either the velocity or the displacement time histories.This study aims to numerically evaluate the seismic response of reinforced concrete cylindrical silos under near-fault ground motions(NFGM)and far-field ground motions(FFGM).The assessment investigates the impact of the slenderness ratio and the para-meters’influence on the seismic behavior of reinforced concrete silos.The validity of the Eurocode provisions in the structural safety of silos will also be inspected.The nonlinear time history analysis is carried out through the finite element approach by examining four silos with different slenderness ratios.The concrete damage plas-ticity model is assigned to the silo wall to simulate the nonlinear behavior of concrete in the plastic zone;while,the behavior of the stored material is represented by the Drucker-Prager plastic model.The wall-granular material interaction is considered and defined by coulomb’s friction theory.The results of the near-fault records reveal a growth up to 72.8%in the hoop stress and 160.4%in the vertical stress compared to the far-field earthquakes.Consequently,the seismic response of reinforced concrete silos is highly sensitive to the type of ground motion,and slender silos tend to impose greater structural demand under the NFGM.Additionally,The Eurocode-8 seismic provisions were adequate in the conventional far-field ground motions and less effective in the near-fault zone.展开更多
The temperature difference between the exposed surface of an underground silo and the surrounding soil surface is significant,which means a silo can be easily found by infrared detection.We designed an infrared camouf...The temperature difference between the exposed surface of an underground silo and the surrounding soil surface is significant,which means a silo can be easily found by infrared detection.We designed an infrared camouflage cloak consisting of an imitative layer and an insulation layer for the silos.The imitative layer is used to imitate the thermal response of the soil to the surrounding environment.The insulation layer is used to weaken the impact of the internal temperature field of the silo on the lower boundary of the imitative layer.A silo model including surrounding soil and a soil model without silo were established,and the influences of the material and thickness of each layer on the infrared camouflage effect were analyzed.The results show that when using a silicone rubber containing alumina powder with a volume fraction of 3.18% as the imitative material,its thermal inertia is in consistent with that of the soil.Meanwhile,it was found that the thickness of the imitative layer doesn't need to be greater than its thermal penetration depth to achieve the infrared camouflage,and the absence of the insulation layer will cause hot spots on the silo surface in winter to weaken the camouflage effect.The optimized thicknesses of the imitative layer and the insulation layer are 22 cm and 4 cm re spectively.The simulations indicate that with the application of the cloak,the maximum value of the absolute values of the temperature differences between the average temperatures of the silo surface and the surrounding soil surface temperatures drops from 1,59℃ to 0.31℃ in summer and from 1.92℃ to 0.21℃ in winter.This designed cloak can achieve an all-weather and full-time passive infrared camouflage.展开更多
This paper aims at analyzing material-induced lateral pressure of RC cylinder silo in both static and dynamic condition using the finite element method( FEM). In the finite element software ABAQUS,concrete material is...This paper aims at analyzing material-induced lateral pressure of RC cylinder silo in both static and dynamic condition using the finite element method( FEM). In the finite element software ABAQUS,concrete material is modeled by concrete damaged plasticity model,and stored materials in silo is modeled by the hypoplastic theory.In terms of numerical model,shell elements( S4R) and solid elements( C3D8) are applied for model silo wall and stored materials respectively. The interaction between silo wall and stored materials is simulated by Coulomb friction model and penalty contact constrain provided by ABAQUS.The numerical results are verified with the existing experimental data that are designed to ensure the validation of such numerical model using FEM and it obtains good agreements between numerical results and experimental data. Then the material parameters are analyzed in both static and dynamic condition.According to the analysis,it is clear that critical friction angle,initial void ratio and minimum void ratio have an obvious effect on static lateral pressure while all the material parameters affect dynamic lateral pressure at different levels. In addition,differences of silo wall between elastic and plastic state are analyzed in dynamic condition. The numerical results show that it contributes to increasing dynamic pressure when silo wall enters into the plastic state. Finally,this paper discusses the time-history lateral pressure at different heights along silo wall,and analytical results indicate that larger acceleration values play main roles in producing the maximum lateral pressure at higher part of the silo wall.展开更多
Transfer learning is an effective method to predict the energy consumption of information-poor buildings by learning transferable knowledge from operational data of information-rich buildings.However,it is not recomme...Transfer learning is an effective method to predict the energy consumption of information-poor buildings by learning transferable knowledge from operational data of information-rich buildings.However,it is not recommended to directly use the operational data without protection due to the risk of leaking occupants’privacy.To address this problem,this study proposes a federated learning-based method to learn transferable knowledge from building operational data without privacy leaking.It trains a transferable federated model based on the operational data from the buildings similar to the target building with limited data.An advanced secure aggregation algorithm is adopted in the training process to ensure that no one can infer private information from the training data.The federated model obtained is evaluated by comparing it with the standalone model without federated learning based on 13 similar office buildings from the Building Data Genome Project.The results show that the federated model outperforms the standalone model concerning the prediction accuracy and training time.On average,the federated model achieves a 25.4%decrease in CV-RMSE when the target building has limited operational data.Even if the target building has no operational data,the federated model still achieves acceptable accuracy(CV-RMSE is 22.2%).Meanwhile,the training time of the federated model is 90%less than that of the standalone model.The research insights can help develop federated learning-based methods for solving the data silos problem in building energy management.The methodology and analysis procedures are reproducible and all codes and data sets are available on Github.展开更多
In this work,a numerical study of the effects of soil-structure interaction(SSI)and granular material-structure interaction(GSI)on the nonlinear response and seismic capacity of flat-bottomed storage silos is conducte...In this work,a numerical study of the effects of soil-structure interaction(SSI)and granular material-structure interaction(GSI)on the nonlinear response and seismic capacity of flat-bottomed storage silos is conducted.A series of incremental dynamic analyses(IDA)are performed on a case of large reinforced concrete silo using 10 seismic recordings.The IDA results are given by two average IDA capacity curves,which are represented,as well as the seismic capacity of the studied structure,with and without a consideration of the SSI while accounting for the effect of GSI.These curves are used to quantify and evaluate the damage of the studied silo by utilizing two damage indices,one based on dissipated energy and the other on displacement and dissipated energy.The cumulative energy dissipation curves obtained by the average IDA capacity curves with and without SSI are presented as a function of the base shear,and these curves allow one to obtain the two critical points and the different limit states of the structure.It is observed that the SSI and GSI significantly influence the seismic response and capacity of the studied structure,particularly at higher levels of PGA.Moreover,the effect of the SSI reduces the damage index of the studied structure by 4%.展开更多
Federated learning is a new type of distributed learning framework that allows multiple participants to share training results without revealing their data privacy.As data privacy becomes more important,it becomes dif...Federated learning is a new type of distributed learning framework that allows multiple participants to share training results without revealing their data privacy.As data privacy becomes more important,it becomes difficult to collect data from multiple data owners to make machine learning predictions due to the lack of data security.Data is forced to be stored independently between companies,creating“data silos”.With the goal of safeguarding data privacy and security,the federated learning framework greatly expands the amount of training data,effectively improving the shortcomings of traditional machine learning and deep learning,and bringing AI algorithms closer to our reality.In the context of the current international data security issues,federated learning is developing rapidly and has gradually moved from the theoretical to the applied level.The paper first introduces the federated learning framework,analyzes its advantages,reviews the results of federated learning applications in industries such as communication and healthcare,then analyzes the pitfalls of federated learning and discusses the security issues that should be considered in applications,and finally looks into the future of federated learning and the application layer.展开更多
A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and ...A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and involves the effects of the conical angle of the storage surface, so it can deal with two cases: the conical angle of the storage surface and the flat storage surface. Compared with the two popular methods based on the silo-aspect ratio and the silo rupture plane, respectively, in current engineering design, the new method can give a range of critical aspect ratios to classify deep silos and squat silos according to the conical angle of the storage surface or the fiat storage surface. Moreover, the range covers the critical aspect ratios obtained from the existing classification methods including the Chinese code based on silo aspect ratios, the German code, Reimbert brothers' definition and Liang et al. 's definition, so it is a more general method to classify silos and the existing methods can be viewed as special cases of the presented method.展开更多
PSYCHIATRISTS DISAGREE profoundly with lawyers,about what we human beings are capable of.The one says we have‘intent’—the other that we do not.They cannot both be right.All non-psychiatrist doctors must perforce ag...PSYCHIATRISTS DISAGREE profoundly with lawyers,about what we human beings are capable of.The one says we have‘intent’—the other that we do not.They cannot both be right.All non-psychiatrist doctors must perforce agree with the lawyers.This paper argues that these harmful discrepancies will continue,until we undo the separate watertight human knowledge silos,which have grown up between legal procedures,general medicine,and psychiatric practice.All three would benefit.Psychiatry in particular,suffers from a grievously narrow view of scientific evidence,one which is open to fundamental criticism.There are radical differences in how the fuzzy concept of‘intent’is regarded in law,in general clinical medicine and in psychiatry.Once‘intent’is accorded its due weight,our understanding of justice,health and sanity is vastly improved,allowing us hugely more optimism.This paper is based on two earlier papers—The Scientific Evidence That‘Intent’Is Vital for Healthcare and Why Quakerism Is More Scientific Than Einstein.These are deployed here,to unpick the unhealthy tangle in which today’s psychiatry now finds itself.Its six sections are—(1)why‘intent’matters in law,in medicine&in psychiatry;(2)scientific quagmires;(3)a working definition for‘madness’;(4)“children are impressionable”;(5)“trust me,I’m a doctor”;and(6)skin heals,why can’t minds?The breakthrough is that verbal fuzziness means that words can mean different things at different times––not that they are 100%meaningless.Only a better understanding of trust,autonomy and consent can open the way to something that is painfully absent from today’s psychiatry––a cure for any and all mental disease.展开更多
A new technology characterized by rapidly non-mechanical settlement of unclassified tailings was developed based on a large number of tests, and dynamic settlement and continual slurry preparation without hardening in...A new technology characterized by rapidly non-mechanical settlement of unclassified tailings was developed based on a large number of tests, and dynamic settlement and continual slurry preparation without hardening in vertical sand silo were eventually realized by the addition of an effective flocculating agent (NPA). The results show that the sedimentation velocity of interface between unclassified tailings and water after the addition of NPA increases by 10-20 times, the sedimentation mass fraction of unclassified tailings at the bottom of vertical sand silo is up to 64%, the solid particle content of waste water meets the national standard, and the side influences of NPA can be removed by the addition of fly ash. The industrial test result shows that the system, the addition manner and the equipments are rational, and the vertical sand silo is used efficiently. This developed system is simple with large throughput, and the processing cost is 2.2 yuan(RMB)/m3, only 10%-20% of that by mechanical settlement.展开更多
There are still cases of millers returning poor quality red wheat to the Zimbabwe Grain Marketing Board(GMB)and this has been an ongoing problem over the past few years.A larger amount of this wheat has discoloured an...There are still cases of millers returning poor quality red wheat to the Zimbabwe Grain Marketing Board(GMB)and this has been an ongoing problem over the past few years.A larger amount of this wheat has discoloured and damaged embryos and it is discounted by millers because the germs are brittle and they crumble easily.There have been also many rejections of the red wheat particularly by major traders.Therefore there was an urgent need to investigate the causes and effects of storage conditions on the quality of silo-stored red wheat,since red wheat is one of human beings’main food supplies.A representative sample of 2.25 kg of red winter wheat was randomly collected from the common red winter wheat incoming to the Grain Marketing Board Depot for storage.This representative sample of 2.25 kg was used as the control sample and its test density was determined.The control sample was then finely ground and analysed for protein,moisture,ash,aflatoxins and falling number.The red winter wheat was then stored in six different silos for a period of 5 months,with each silo having different humidity and temperature conditions.Representative samples of 4.5 kg were randomly collected monthly from each silo during the storage period.The test densities of the representative samples were determined.These representative samples were then finely ground and analysed for protein,moisture,ash,aflatoxins,and falling number.The results of the red wheat in storage were then compared with those of the control sample and analysed by analysis of variance(ANOVA)at the 5%level of significance.Results obtained after data analysis suggest that there were significant differences in the protein content,moisture content and falling number of the wheat before and after storage.However,differences in test density,aflatoxin and ash contents of the wheat before and after storage were not statistically significant at the 5%level of significance.The deterioration in wheat quality was attributed to the high storage tempera-ture and humidity conditions.It was also concluded that the optimum conditions for wheat storage are a temperature of 15 oC and a humidity of 60%.展开更多
The paper covers the electrical capacitance tomography(ECT) data analysis on shear zones formed during silo discharging process.This is due to the ECT aptitude for detection of slight changes of material concentration...The paper covers the electrical capacitance tomography(ECT) data analysis on shear zones formed during silo discharging process.This is due to the ECT aptitude for detection of slight changes of material concentration.On the basis of ECT visualisations,wall-adjacent shear zone profiles are analysed for different wall roughness parameters.The analysis on changes of material concentration,based on ECT images,enables the calculation for the characteristic parameters of shear zones-size and material concentration inside the shear zone in a dynamic process of silo discharging.In order to verify the methodology a series of experiments on gravitational flow of bulk solids under various conditions were conducted with different initial granular material packing densities and silo wall roughness.The investigation shows that the increase in container wall roughness is an effective method for reducing the dynamic effects during the material discharging,since these effects are resulted from the resonance between hopper construction and trembling material.Such effects will damage industrial equipment in practical applications and need further investigation.展开更多
文摘This research study quantifies the PM<sub>10</sub> emission rates (g/s) from cement silos in 25 concrete batching facilities for both controlled and uncontrolled scenarios by applying the USEPA AP-42 guidelines step-by-step approach. The study focuses on evaluating the potential environmental impact of cement dust fugitive emissions from 176 cement silos located in 25 concrete batching facilities in the M35 Mussafah industrial area of Abu Dhabi, UAE. Emission factors are crucial for quantifying the PM<sub>10</sub> emission rates (g/s) that support developing source-specific emission estimates for areawide inventories to identify major sources of pollution that provide screening sources for compliance monitoring and air dispersion modeling. This requires data to be collected involves information on production, raw material usage, energy consumption, and process-related details, this was obtained using various methods, including field visits, surveys, and interviews with facility representatives to calculate emission rates accurately. Statistical analysis was conducted on cement consumption and emission rates for controlled and uncontrolled sources of the targeted facilities. The data shows that the average cement consumption among the facilities is approximately 88,160 (MT/yr), with a wide range of variation depending on the facility size and production rate. The emission rates from controlled sources have an average of 4.752E<sup>-04</sup> (g/s), while the rates from uncontrolled sources average 0.6716 (g/s). The analysis shows a significant statistical relationship (p < 0.05) and perfect positive correlation (r = 1) between cement consumption and emission rates, indicating that as cement consumption increases, emission rates tend to increase as well. Furthermore, comparing the emission rates from controlled and uncontrolled scenarios. The data showed a significant difference between the two scenarios, highlighting the effectiveness of control measures in reducing PM<sub>10</sub> emissions. The study’s findings provide insights into the impact of cement silo emissions on air quality and the importance of implementing control measures in concrete batching facilities. The comparative analysis contributes to understanding emission sources and supports the development of pollution control strategies in the Ready-Mix industry.
文摘Silos are strategical structures used to stockpile various types of granular materials.They are highly vulnerable to earthquake excitation and have been frequently reported to fail at a higher rate than any other industrial structure.The seismic response of silos within the near-fault region will suffer a complex combination of loadings due to the unique characteristics of the near-fault ground motions;which are usually associated with a large amplitude pulse at the beginning of either the velocity or the displacement time histories.This study aims to numerically evaluate the seismic response of reinforced concrete cylindrical silos under near-fault ground motions(NFGM)and far-field ground motions(FFGM).The assessment investigates the impact of the slenderness ratio and the para-meters’influence on the seismic behavior of reinforced concrete silos.The validity of the Eurocode provisions in the structural safety of silos will also be inspected.The nonlinear time history analysis is carried out through the finite element approach by examining four silos with different slenderness ratios.The concrete damage plas-ticity model is assigned to the silo wall to simulate the nonlinear behavior of concrete in the plastic zone;while,the behavior of the stored material is represented by the Drucker-Prager plastic model.The wall-granular material interaction is considered and defined by coulomb’s friction theory.The results of the near-fault records reveal a growth up to 72.8%in the hoop stress and 160.4%in the vertical stress compared to the far-field earthquakes.Consequently,the seismic response of reinforced concrete silos is highly sensitive to the type of ground motion,and slender silos tend to impose greater structural demand under the NFGM.Additionally,The Eurocode-8 seismic provisions were adequate in the conventional far-field ground motions and less effective in the near-fault zone.
基金funded by the National Natural Science Foundation of China(contract grant number 51576188)。
文摘The temperature difference between the exposed surface of an underground silo and the surrounding soil surface is significant,which means a silo can be easily found by infrared detection.We designed an infrared camouflage cloak consisting of an imitative layer and an insulation layer for the silos.The imitative layer is used to imitate the thermal response of the soil to the surrounding environment.The insulation layer is used to weaken the impact of the internal temperature field of the silo on the lower boundary of the imitative layer.A silo model including surrounding soil and a soil model without silo were established,and the influences of the material and thickness of each layer on the infrared camouflage effect were analyzed.The results show that when using a silicone rubber containing alumina powder with a volume fraction of 3.18% as the imitative material,its thermal inertia is in consistent with that of the soil.Meanwhile,it was found that the thickness of the imitative layer doesn't need to be greater than its thermal penetration depth to achieve the infrared camouflage,and the absence of the insulation layer will cause hot spots on the silo surface in winter to weaken the camouflage effect.The optimized thicknesses of the imitative layer and the insulation layer are 22 cm and 4 cm re spectively.The simulations indicate that with the application of the cloak,the maximum value of the absolute values of the temperature differences between the average temperatures of the silo surface and the surrounding soil surface temperatures drops from 1,59℃ to 0.31℃ in summer and from 1.92℃ to 0.21℃ in winter.This designed cloak can achieve an all-weather and full-time passive infrared camouflage.
基金Sponsored by the National Natural Science Foundation of China(Grant No.51478033,51179029)
文摘This paper aims at analyzing material-induced lateral pressure of RC cylinder silo in both static and dynamic condition using the finite element method( FEM). In the finite element software ABAQUS,concrete material is modeled by concrete damaged plasticity model,and stored materials in silo is modeled by the hypoplastic theory.In terms of numerical model,shell elements( S4R) and solid elements( C3D8) are applied for model silo wall and stored materials respectively. The interaction between silo wall and stored materials is simulated by Coulomb friction model and penalty contact constrain provided by ABAQUS.The numerical results are verified with the existing experimental data that are designed to ensure the validation of such numerical model using FEM and it obtains good agreements between numerical results and experimental data. Then the material parameters are analyzed in both static and dynamic condition.According to the analysis,it is clear that critical friction angle,initial void ratio and minimum void ratio have an obvious effect on static lateral pressure while all the material parameters affect dynamic lateral pressure at different levels. In addition,differences of silo wall between elastic and plastic state are analyzed in dynamic condition. The numerical results show that it contributes to increasing dynamic pressure when silo wall enters into the plastic state. Finally,this paper discusses the time-history lateral pressure at different heights along silo wall,and analytical results indicate that larger acceleration values play main roles in producing the maximum lateral pressure at higher part of the silo wall.
基金supported by the National Key Research and Development Program of China(No.2018YFE0116300)the National Natural Science Foundation of China(No.51978601).
文摘Transfer learning is an effective method to predict the energy consumption of information-poor buildings by learning transferable knowledge from operational data of information-rich buildings.However,it is not recommended to directly use the operational data without protection due to the risk of leaking occupants’privacy.To address this problem,this study proposes a federated learning-based method to learn transferable knowledge from building operational data without privacy leaking.It trains a transferable federated model based on the operational data from the buildings similar to the target building with limited data.An advanced secure aggregation algorithm is adopted in the training process to ensure that no one can infer private information from the training data.The federated model obtained is evaluated by comparing it with the standalone model without federated learning based on 13 similar office buildings from the Building Data Genome Project.The results show that the federated model outperforms the standalone model concerning the prediction accuracy and training time.On average,the federated model achieves a 25.4%decrease in CV-RMSE when the target building has limited operational data.Even if the target building has no operational data,the federated model still achieves acceptable accuracy(CV-RMSE is 22.2%).Meanwhile,the training time of the federated model is 90%less than that of the standalone model.The research insights can help develop federated learning-based methods for solving the data silos problem in building energy management.The methodology and analysis procedures are reproducible and all codes and data sets are available on Github.
文摘In this work,a numerical study of the effects of soil-structure interaction(SSI)and granular material-structure interaction(GSI)on the nonlinear response and seismic capacity of flat-bottomed storage silos is conducted.A series of incremental dynamic analyses(IDA)are performed on a case of large reinforced concrete silo using 10 seismic recordings.The IDA results are given by two average IDA capacity curves,which are represented,as well as the seismic capacity of the studied structure,with and without a consideration of the SSI while accounting for the effect of GSI.These curves are used to quantify and evaluate the damage of the studied silo by utilizing two damage indices,one based on dissipated energy and the other on displacement and dissipated energy.The cumulative energy dissipation curves obtained by the average IDA capacity curves with and without SSI are presented as a function of the base shear,and these curves allow one to obtain the two critical points and the different limit states of the structure.It is observed that the SSI and GSI significantly influence the seismic response and capacity of the studied structure,particularly at higher levels of PGA.Moreover,the effect of the SSI reduces the damage index of the studied structure by 4%.
基金supported by National Natural Science Foundation of China (NO.51974131)Hebei Province Natural Science Fund for Distinguished Young Scholars (NO.E2020209082).
文摘Federated learning is a new type of distributed learning framework that allows multiple participants to share training results without revealing their data privacy.As data privacy becomes more important,it becomes difficult to collect data from multiple data owners to make machine learning predictions due to the lack of data security.Data is forced to be stored independently between companies,creating“data silos”.With the goal of safeguarding data privacy and security,the federated learning framework greatly expands the amount of training data,effectively improving the shortcomings of traditional machine learning and deep learning,and bringing AI algorithms closer to our reality.In the context of the current international data security issues,federated learning is developing rapidly and has gradually moved from the theoretical to the applied level.The paper first introduces the federated learning framework,analyzes its advantages,reviews the results of federated learning applications in industries such as communication and healthcare,then analyzes the pitfalls of federated learning and discusses the security issues that should be considered in applications,and finally looks into the future of federated learning and the application layer.
基金The National Key Technologies R & D Program during the 11th Five-Year Plan Period(No.2006BAD08B01)the Program for New Century Excellent Talents in Universities of Henan Province(No.2005HANCET-13)
文摘A new method is presented for silo classification using the rupture plane in the storage. The proposed method is based on the formula of rupture plane orientation determined by the aspect ratio of specified silos and involves the effects of the conical angle of the storage surface, so it can deal with two cases: the conical angle of the storage surface and the flat storage surface. Compared with the two popular methods based on the silo-aspect ratio and the silo rupture plane, respectively, in current engineering design, the new method can give a range of critical aspect ratios to classify deep silos and squat silos according to the conical angle of the storage surface or the fiat storage surface. Moreover, the range covers the critical aspect ratios obtained from the existing classification methods including the Chinese code based on silo aspect ratios, the German code, Reimbert brothers' definition and Liang et al. 's definition, so it is a more general method to classify silos and the existing methods can be viewed as special cases of the presented method.
文摘PSYCHIATRISTS DISAGREE profoundly with lawyers,about what we human beings are capable of.The one says we have‘intent’—the other that we do not.They cannot both be right.All non-psychiatrist doctors must perforce agree with the lawyers.This paper argues that these harmful discrepancies will continue,until we undo the separate watertight human knowledge silos,which have grown up between legal procedures,general medicine,and psychiatric practice.All three would benefit.Psychiatry in particular,suffers from a grievously narrow view of scientific evidence,one which is open to fundamental criticism.There are radical differences in how the fuzzy concept of‘intent’is regarded in law,in general clinical medicine and in psychiatry.Once‘intent’is accorded its due weight,our understanding of justice,health and sanity is vastly improved,allowing us hugely more optimism.This paper is based on two earlier papers—The Scientific Evidence That‘Intent’Is Vital for Healthcare and Why Quakerism Is More Scientific Than Einstein.These are deployed here,to unpick the unhealthy tangle in which today’s psychiatry now finds itself.Its six sections are—(1)why‘intent’matters in law,in medicine&in psychiatry;(2)scientific quagmires;(3)a working definition for‘madness’;(4)“children are impressionable”;(5)“trust me,I’m a doctor”;and(6)skin heals,why can’t minds?The breakthrough is that verbal fuzziness means that words can mean different things at different times––not that they are 100%meaningless.Only a better understanding of trust,autonomy and consent can open the way to something that is painfully absent from today’s psychiatry––a cure for any and all mental disease.
基金Project(2006BAB02A03) supported by National Key Technology Research and Development ProgramProject(2006BA02B05) supported by Key Programs for Science and Technology Development of China during the 11th Five Year
文摘A new technology characterized by rapidly non-mechanical settlement of unclassified tailings was developed based on a large number of tests, and dynamic settlement and continual slurry preparation without hardening in vertical sand silo were eventually realized by the addition of an effective flocculating agent (NPA). The results show that the sedimentation velocity of interface between unclassified tailings and water after the addition of NPA increases by 10-20 times, the sedimentation mass fraction of unclassified tailings at the bottom of vertical sand silo is up to 64%, the solid particle content of waste water meets the national standard, and the side influences of NPA can be removed by the addition of fly ash. The industrial test result shows that the system, the addition manner and the equipments are rational, and the vertical sand silo is used efficiently. This developed system is simple with large throughput, and the processing cost is 2.2 yuan(RMB)/m3, only 10%-20% of that by mechanical settlement.
文摘There are still cases of millers returning poor quality red wheat to the Zimbabwe Grain Marketing Board(GMB)and this has been an ongoing problem over the past few years.A larger amount of this wheat has discoloured and damaged embryos and it is discounted by millers because the germs are brittle and they crumble easily.There have been also many rejections of the red wheat particularly by major traders.Therefore there was an urgent need to investigate the causes and effects of storage conditions on the quality of silo-stored red wheat,since red wheat is one of human beings’main food supplies.A representative sample of 2.25 kg of red winter wheat was randomly collected from the common red winter wheat incoming to the Grain Marketing Board Depot for storage.This representative sample of 2.25 kg was used as the control sample and its test density was determined.The control sample was then finely ground and analysed for protein,moisture,ash,aflatoxins and falling number.The red winter wheat was then stored in six different silos for a period of 5 months,with each silo having different humidity and temperature conditions.Representative samples of 4.5 kg were randomly collected monthly from each silo during the storage period.The test densities of the representative samples were determined.These representative samples were then finely ground and analysed for protein,moisture,ash,aflatoxins,and falling number.The results of the red wheat in storage were then compared with those of the control sample and analysed by analysis of variance(ANOVA)at the 5%level of significance.Results obtained after data analysis suggest that there were significant differences in the protein content,moisture content and falling number of the wheat before and after storage.However,differences in test density,aflatoxin and ash contents of the wheat before and after storage were not statistically significant at the 5%level of significance.The deterioration in wheat quality was attributed to the high storage tempera-ture and humidity conditions.It was also concluded that the optimum conditions for wheat storage are a temperature of 15 oC and a humidity of 60%.
基金Supported by the Polish Ministry of Science and Higher Education in 2009-2012 as a research project (3687/B/T02/2009/37)
文摘The paper covers the electrical capacitance tomography(ECT) data analysis on shear zones formed during silo discharging process.This is due to the ECT aptitude for detection of slight changes of material concentration.On the basis of ECT visualisations,wall-adjacent shear zone profiles are analysed for different wall roughness parameters.The analysis on changes of material concentration,based on ECT images,enables the calculation for the characteristic parameters of shear zones-size and material concentration inside the shear zone in a dynamic process of silo discharging.In order to verify the methodology a series of experiments on gravitational flow of bulk solids under various conditions were conducted with different initial granular material packing densities and silo wall roughness.The investigation shows that the increase in container wall roughness is an effective method for reducing the dynamic effects during the material discharging,since these effects are resulted from the resonance between hopper construction and trembling material.Such effects will damage industrial equipment in practical applications and need further investigation.