Fabrication Silver Film inside Silica Capillary

To study hollow waveguides for CO 2 laser transmission,a liquid-phase depositi on technique is applied to form a silver film inside silica capillary based on t he method of silver mirror reaction.Using this fabrication method,the optimum co mbination of different parameters is gained and hollow waveguides have been made successfully with a bore size of 1mm and a guide with length of as long as 2m o n self-producing apparatus.To meet quality silver film,a relative high temperat ure,low flowing speed and long time are adopted on the basis of low reactant con centration.The maximum transmission efficiency of hollow-core fiber without die lectric coating can be up to 85 percent and loss can be low to 0.5dB/m,maximum o utput power is 53W for stable 20mintues.

Fabrication of Large-area 3-D Ordered Silvercoated Colloidal Crystals and Macroporous Silver Films Using Polystyrene Templates

The highly ordered silver-coated colloidal crystals arrays and macroporous silver films were derived through an electrostatics-induced adsorption effect using polystyrene(PS) as templates. Carboxyl-modified PS microspheres were prepared by emulsifier-free emulsion polymerization using methacrylic acid(MAA) as the functional monomer. PS microspheres were self-assembled into close packing colloidal crystals of facecentered cubic arrays to the substrate with vertical deposition method. These colloidal crystals were modified using dopamine(DA) to form poly-dopamine(PDA) during its oxidative polymerization. Through electrostatic interaction, the silver nanoparticles were deposited and adsorbed onto the surfaces of colloidal crystals templates by exposing [Ag(NH_3)_2]^+solution to infrared irradiation. Removal of the polymeric template by etching with methylbenzene solvent resulted in 3D ordered macroporous silver films. The structural and properties of the ordered silver-coated arrays and macroporous silver films were characterized by field emission scanning electron microscopy(FE-SEM), X-ray diffraction(XRD), UV-vis spectroscopy and surface-enhanced Raman spectroscopy(SERS). The results indicate that the prepared silver-coated arrays and macroporous silver films possess the features of ordered multilayer arrangement, uniformity and repeatability as well as an ideal SERS effect.

CHEMICALLY DEPOSITED SILVER FILM USED AS A SERS-ACTIVE OVER-COATING LAYER FOR POLYMER FILM

When colloidal silver particles were chemically deposited onto polymer film as an over-coating layer, surface-enhanced Raman scattering (SERS) spectra could be collected for the surface analysis. SERS measurements of liquid crystal film were successfully performed without disturbing the surface morphology.

THE STUDY OF ADSORPTION MODEL FOR 4,4'-BIPYRIDINE ADSORBED AT THE CHEMICALLY DEPOSITED SILVER FILM BY SERS

This paper presents the SERS spectru spectrum of 4,4′-bipyridine adsorbed at the chemically deposited silver filem.Comparing with the normal Raman spectra of 4,4′-bipyridine in the solid state and in 0.5 mol/L methanol solution ,we have studied the SERS spectrum and further discussed the adsorption model for 4,4′-bipyridine adsorbed at the chemically deposited silver film,and also explained the experimental results with image field mode,Experimental results show that 4,4′-bipyridine adsorbed at the chemically deposiled silver ilm via N-atom of pyridinering (Upright).

Simulation and analysis of phase-sensitive surface plasmon resonance sensor based on enhanced optical transmission through arrays of nanoholes in silver films

A high spatial resolution, phase-sensitive Surface Plasmon Resonance(SPR) sensor based on Extraordinary Optical Transmission(EOT) is proposed to monitor the binding of organic and biological molecules to the silver surface. The 2D nanohole-array configuration is well suited for dense integration in a sensor chip. The optical geometry is collinear, which simplifies the alignment with respect to the traditional Kretschmann arrangement for SPR sensing. Various design parameters of the device have been studied by simulation. The heterodyne technique is used to improve the sensitivity. The optimization results indicate that the sensor has the advantages of achieving high resolution and a wide dynamic range simultaneously.

A new approach for deposition of silver film from AgCl through successive ionic layer adsorption and reaction technique

An attempt was made to deposit thin film of silver onto the glass substrate by using Ag Cl precursor, instead of conventional precursor AgNO_3 with vitamin C by inexpensive and convenient successive ionic layer adsorption and reaction(SILAR) method. The deposited silver thin film was characterized by X-ray diffraction(XRD) analysis, scanning electron microscope(SEM), UV-visible and electrical I-V study. The diffraction study showed FCC structure of metallic silver in good agreement with the standard values of JCPDS(04–0783). SEM reveals flower like nano particles produced on the substrate. The surface plasmon resonance(SPR) peak in the UV-visible spectrum shows maximum absorption at 350 nm. The film shows an ohmic behavior and its electrical resistivity was found ~103 ?·cm at room temperature.

Multifunctional silver film with superhydrophobic and antibacterial properties

Material properties are strongly dependent on material structure. The large diversity and complexity of material structures provide significant opportunities to improve the properties of the materials, expanding their applications. Here, we discuss the fabrication of a multifunctional silver film prepared by controlling the nucleation and growth of silver particles. Silver films with high hydrophobicity and antibacterial activity were fabricated by adopting an electrochemical approach. The dependence of the hydrophobic and antibacterial properties on the size and shape of the silver particles was first investigated. Small-sized silver particles exhibited a high antibacterial rate, while a porous silver film composed of dendritic particles showed a significant hydrophobic activity. By regulating the reaction time, current density, and silver salt concentration, a silver film with a contact angle of 150.9° and an antibacterial rate of 54.7% was synthesized. This study demonstrates that finding a compromise between different material structures is a suitable wav to fabricate multifunctional devices.

Electroless Plating of Thin Silver Films on Porous Al_2O_3 Substrate and the Study of Deposition Kinetics

A novel concept has been developed to coat the inner pore surfaces of reticulated alumina with a thin silver film by an electroless-plating method. As a result of coating, the porous alumina sample exhibits a sharp transition from insulating to conducting due to a thin silver layer on the inner pore surfaces. Systematic studies have been carried out to investigate the coating kinetics by employment of scanning electron microscope （SEM）, X-ray diffraction （XRD）, and computer simulation. Both coating procedures and effects of processing parameters on the quality of films are reported. Also, this paper presents the film bonding strength to the substrate, effects of sintering, and conduction mechanism of coated composite. The fundamental silver electroless-plating mechanism has been identified based on computer modeling. The simulation results indicate an excellent agreement between the silver deposition behavior and the physical model applied.

Floating silver film： A flexible surface-enhanced Raman spectroscopy substrate for direct liquid phase detection at gas-liquid interfaces

In recent years, surface-enhanced Raman spectroscopy （SERS） has developed rapidly and is used for the detection of molecules and biomolecules in liquids. However, few studies have focused on SERS using a water surface as the substrate. A floating metal film on water is desirable for an enhanced SERS performance. In this work, silver nanopartides （Ag NPs） encased in poly（vinylpyrrolidone） films （Ag-PVP films） were synthesized on the surface of an aqueous solution by room temperature electron reduction. A floating silver film on a water surface was thereby achieved and is reported for the first time. The synthesized Ag-PVP film is an excellent flexible substrate for SERS and has other potential appli- cations. Using the floating silver film as a flexible SERS substrate, 10-11 M of 4-aminothiophenol, 10^-6 M of riboflavin, 10^-9 M of 4-mercaptobenzoic acid, 10^-7 M of 4-mercaptophenol, and 10^-7 M of 4-aminobenzoic acid are identified, demonstrating potential use for the floating substrate in the liquid-phase detection of molecules.

The Effect of Laser Irradiation on Surface Enhanced Raman Scatering for Silver Film

The laser irradiation effect on the SERS intensity for Ag film is discussed using crystal violet (CV) as a probe. The thickness of silver film,the etching time of the glass slide by gaseous hydrogen fluoride, and the laser irradiation time for different amounts of CV on silver films were investigated. The laser burn out model was proposed to explain the dependence of the SERS intensity of CV on the laser irradiation time.

Optical performance of ultra-thin silver films under the attenuated total reflection mode

Ultra-thin silver films were deposited by thermal evaporation, and the dielectric functions of samples were simulated using Drude-Lorentz oscillators. When s-polarized incident light from the BK7 glass into thin silver film at 45°angle using attenuated total reflection （ATR） mode, we experimental observed that the reflection reach a minimum of 1.87% at 520 nm for thickness of d--6.3 nm silver film, and it reach a minimum of 10.1% at 500 nm for thickness of d--4.1 nm. Moreover, we simulated the absorption changes with incident angles at 520 nm for both p-polarized （TM wave） and s-polarized （TE wave） light using transfer matrix theory, and calculated the electric field distributions. The absorption as a function of incident angles of TM wave and TE wave showed different characteristics under ATR mode, TE wave reached the maximum absorption around the critical angle θc-41.1°, while TM wave reached the minimum absorption.

Preparation of Nano Silver/Silk Fibroin Composite Films

In this study, the outstanding biocompatibility of silk fibroin （SF） and the highly efficient anti-bacterial effect of nano silver （NS） were utilized to prepare SF/NS composite film with anti- bacterial property. The structure and property of the film were characterized. The results showed that the structure of SF in the film was mainly silk I. SF in the film was almost insoluble in water. The tensile strength of film with NS was significantly lower than that of films without NS. When the addition of NS was within the range of 0%-0.6%, the elongation at break had no significant difference. The antibacterial rate of the film on staphylococcus aurens and escherichia coil increased with the amount of NS. The minimum amount of NS in the fdm was O. 1% and the maximum amount was 0.5%.

Deposition of hexagonal boron nitride thin films on silver nanoparticle substrates and surface enhanced infrared absorption

Silver nanoparticle thin films with different average particle diameters are grown on silicon substrates. Boron nitride thin films are then deposited on the silver nanoparticle interlayers by radio frequency （RF） magnetron sputtering. The boron nitride thin films are characterized by Fourier transform infrared spectra. The average particle diameters of silver nanoparticle thin films are 126.6, 78.4, and 178.8 nm. The results show that the sizes of the silver nanoparticles have effects on the intensities of infrared spectra of boron nitride thin films. An enhanced infrared absorption is detected for boron nitride thin film grown on silver nanoparticle thin film. This result is helpful to study the growth mechanism of boron nitride thin film.

Angle-sensitive and fast photovoltage of silver nanocluster embeded ZnO thin films induced by 1.064-μm pulsed laser

Silver nanocluster embedded ZnO composite thin film was observed to have an angle-sensitive and fast photovoltaic effect in the angle range from -90° to 90° , its peak value and the polarity varied regularly with the angle of incidence of the 1.064-μm pulsed Nd：YAG laser radiation onto the ZnO surface. Meanwhile, for each photovoltaic signal, its rising time reached -2 ns with an open-circuit photovoltage of -2 ns full width at half-maximum. This angle-sensitive fast photovoltaic effect is expected to put this composite film a candidate for angle-sensitive and fast photodetector.

Improvement of the Conductivity of Silver Nanowire Film by Adding Silver Nano-Particles

The change of conductivity and transparency of silver nanowire （AgNW） films by adding silver nano-particles （AgNPs） onto their surface is studied. The results show that the conductivity of the AgNW film is greatly improved with its sheet resistance reduced about 78. 7% to 51.9Ω/sq, and there is no obvious reduction of the transmittance. Further studies show that there is a self-assembling process pushing the AgNPs to concentrate at the intersecting points between AgNWs to weld them, which would reduce the intersection resistance between the AgNWs. This self-assembling behavior is led by the surface interactivities among the dispersing liquid of AgNPs, the surface of the substrate and AgNWs when the dispersing liquid is drying.

Evolution of the structural and optical properties of silver oxide films with different stoichiometries deposited by direct-current magnetron reactive sputtering

Nitrogen doping of silver oxide （AgxO） film is necessary for its application in transparent conductive film and diodes because intrinsic AgxO film is a p-type semiconductor with poor conductivity. In this work, a series of AgxO films is deposited on glass substrates by direct-current magnetron reactive sputtering at different flow ratios （FRs） of nitrogen to 02. Evolutions of the structure, the refiectivity, and the transmissivity of the film are studied by X-ray diffractometry and sphectrophotometry, respectively. The specular transmissivity and the specular refiectivity of the film decreasing with FR increasing can be attributed to the evolution of the phase structure of the film. The nitrogen does not play the role of an acceptor dopant in the film deposition.

A STUDY ON VOLTAMMETRIC BEHAVIOR OF INDIGO CARMINE AND ITS MIXTURE WITH AMARANTH AT MERCURY FILM ELECTRODE ON SILVER SUBSTRATE

The voltammetric behavior of indigo carmine at mercury film electrode on a silver substrate (MFES) was studied in this paper. It was found that indigo carmine gave a sensitive reduction peak at a potential (Vp) of -0.11 V at pH 4.0 in aqueous solution. The MFES gave good reproducibility and life time. The peak currents (ip) depended lipearly on the concentrations of indigo carmine free 0 to 100 ng/ml. The Vp and Ip of indigo carmine at MFES were independent of the concentrations of amaranth at pH 4.0, the Vp of amaranth was -0.24 V at this pH. The differences of Vp between both colorants enabled to distinguish indigo carmine free amaranth.

Fabrication of High-Haze Flexible Transparent Conductive PMMA Films Embedded with Silver Nanowires

High-haze flexible transparent conductive polymethyl methacrylate （PMMA） films embedded with silver nanowires （AgNWs） are fabricated by a low-cost and simple process. The volatilization rate of the solvent in PMMA solution affects the surface microstructures and morphologies, which results in different haze factors of the composite films. The areal mass density of AgNW shows a significant influence on the optical and electrical properties of composite films. The AgNW/PMMA transparent conductive films with the sheet resistance of 5.5Ω sq ^-1 exhibit an excellent performance with a high haze factor of 81.0% at 550？nm.

银纳米线透明导电薄膜仿真研究现状

银纳米线薄膜作为新型柔性透明导电薄膜,具有导电性能好、透光率高、成本低和柔性良好等优点。本文从电学、力学和光学三个方面介绍了银纳米线薄膜的仿真原理、仿真工具及发展现状。目前,银纳米线薄膜的电学性能仿真已研究得比较完善,能够从微观到宏观尺度建立精确的模型,常用的节点主导假设(JDA)模型、多节点表示(MNR)模型能够较好地模拟、预测银纳米线薄膜的方阻。银纳米线薄膜力学仿真尚未能建立起完美的宏观模型,只能通过分子动力学方法等对单根或多根银纳米线之间的力学性能进行仿真模拟。银纳米线薄膜的光学性能的仿真主要依靠时域有限差分方法来模拟光与材料的相互作用,依靠该方法能够模拟少量银纳米线的光学性能,并且目前已有建立大型复杂银纳米线薄膜光学模型的尝试。此外,多物理场耦合且能够反映整个银纳米线薄膜的光-电-热-力综合性能的仿真模型仍未建立,未来研究者们还需于此继续深耕。

Preparation and Fluorescence Properties of Co-doped Nanocomposite Film Based on Supra Molecular Structure

为改善功能分了的特性,提出一种基于金属纳米粒子-偶氮染料复合物共掺杂超分子结构功能材料的设计新方法.并依照此方法制备出复合材料,观测了其显微结构,测量了其紫外-可见光吸收,研究了该超分子结构复合体系的荧光特性.实验发现,由于金属银纳米粒子的掺杂,使得超分子结构复合体系中功能分子甲基橙在溶液态体系的荧光强度增强近5倍,而在两种不同结构(共混结构和包覆结构)的薄膜态超分子结构体系中,其荧光强度分别被猝灭15%和20%.研究结果表明,复合膜中采用超分子结构完全能够改善功能分子的特性.