Fiber supercapacitor(FSC)is a promising power source for wearable/stretchable electronics and high capacitive performance of FSCs is highly desirable for practice flexible applications.Here,we report a composite of ma...Fiber supercapacitor(FSC)is a promising power source for wearable/stretchable electronics and high capacitive performance of FSCs is highly desirable for practice flexible applications.Here,we report a composite of manganese dioxide(Mn O_2)and activated carbon fibers(ACFs)with high MnO_2mass loading and microporous structure(abbreviated as Mn O_2@ACF),which is used as a fiber electrode to produce a FSC with a high capacitive performance and a good flexibility.The MnO_2@ACF composite electrode in FSCs delivers an ultrahigh specific capacitance of 410 mF/cm^2at 0.1 mA/cm^2,corresponding to a high energy density of 36μWh/cm^2and high power density of 726μW/cm^2.Such high capacitive performance and simple fabrication method indicates that the Mn O_2@ACF composite is a very promising electrode material for flexible fiber supercapacitors.展开更多
Non-thermal plasma(NTP)surface modification technology is a new method to control the surface properties of materials,which has been widely used in the field of environmental protection because of its short action tim...Non-thermal plasma(NTP)surface modification technology is a new method to control the surface properties of materials,which has been widely used in the field of environmental protection because of its short action time,simple process and no pollution.In this study,Cu/ACF(activated carbon fiber loaded with copper)adsorbent was modified with NTP to remove H_(2)S and PH_(3) simultaneously under low temperature and micro-oxygen condition.Meanwhile,the effects of different modified atmosphere(air,N_(2) and NH_(3)),specific energy input(0–13 J/mL)and modification time(0–30 min)on the removal of H_(2)S and PH_(3) were investigated.Performance test results indicated that under the same reaction conditions,the adsorbent modified by NH_(3) plasma with 5 J/mL for 10 min had the best removal effect on H_(2)S and PH_(3).CO_(2) temperature-programmed desorption and X-ray photoelectron spectroscopy(XPS)analyzes showed that NH_(3) plasma modification could introduce amino functional groups on the surface of the adsorbent,and increase the types and number of alkaline sites on the surface.Brunauer-Emmett-Teller and scanning electron microscopy showed that NH_(3) plasma modification did not significantly change the pore size structure of the adsorbent,but more active components were evenly exposed to the surface,thus improving the adsorption performance.In addition,X-ray diffraction and XPS analysis indicated that the consumption of active components(Cu and Cu_(2)O)and the accumulation of sulfate and phosphate on the surface and inner pores of the adsorbent are the main reasons for the deactivation of the adsorbent.展开更多
基金supported by the National Natural Science Foundation of China (No. 51702229, and No. 51525204)the National Key Basic Research Program of China (2014CB932400)
文摘Fiber supercapacitor(FSC)is a promising power source for wearable/stretchable electronics and high capacitive performance of FSCs is highly desirable for practice flexible applications.Here,we report a composite of manganese dioxide(Mn O_2)and activated carbon fibers(ACFs)with high MnO_2mass loading and microporous structure(abbreviated as Mn O_2@ACF),which is used as a fiber electrode to produce a FSC with a high capacitive performance and a good flexibility.The MnO_2@ACF composite electrode in FSCs delivers an ultrahigh specific capacitance of 410 mF/cm^2at 0.1 mA/cm^2,corresponding to a high energy density of 36μWh/cm^2and high power density of 726μW/cm^2.Such high capacitive performance and simple fabrication method indicates that the Mn O_2@ACF composite is a very promising electrode material for flexible fiber supercapacitors.
基金funding for this study received from the Fundamental Research Funds for the National Natural Science Foundation of China(Nos.21876071,51968034,41807373 and 21667015)Science and Technology Program of Yunnan province(No.2019FB069).
文摘Non-thermal plasma(NTP)surface modification technology is a new method to control the surface properties of materials,which has been widely used in the field of environmental protection because of its short action time,simple process and no pollution.In this study,Cu/ACF(activated carbon fiber loaded with copper)adsorbent was modified with NTP to remove H_(2)S and PH_(3) simultaneously under low temperature and micro-oxygen condition.Meanwhile,the effects of different modified atmosphere(air,N_(2) and NH_(3)),specific energy input(0–13 J/mL)and modification time(0–30 min)on the removal of H_(2)S and PH_(3) were investigated.Performance test results indicated that under the same reaction conditions,the adsorbent modified by NH_(3) plasma with 5 J/mL for 10 min had the best removal effect on H_(2)S and PH_(3).CO_(2) temperature-programmed desorption and X-ray photoelectron spectroscopy(XPS)analyzes showed that NH_(3) plasma modification could introduce amino functional groups on the surface of the adsorbent,and increase the types and number of alkaline sites on the surface.Brunauer-Emmett-Teller and scanning electron microscopy showed that NH_(3) plasma modification did not significantly change the pore size structure of the adsorbent,but more active components were evenly exposed to the surface,thus improving the adsorption performance.In addition,X-ray diffraction and XPS analysis indicated that the consumption of active components(Cu and Cu_(2)O)and the accumulation of sulfate and phosphate on the surface and inner pores of the adsorbent are the main reasons for the deactivation of the adsorbent.
