Numerical Simulation of the Settling Flux of Biodeposition in a Bay with Cage Culture Through Similarity Theory and a Simplified Pollution Source

The settling flux of biodeposition affects the environmental quality of cage culture areas and determines their environmental carrying capacity.Simple and effective simulation of the settling flux of biodeposition is extremely important for determining the spatial distribution of biodeposition.Theoretically,biodeposition in cage culture areas without specific emission rules can be simplified as point source pollution.Fluent is a fluid simulation software that can simulate the dispersion of particulate matter simply and efficiently.Based on the simplification of pollution sources and bays,the settling flux of biodeposition can be easily and effectively simulated by Fluent fluid software.In the present work,the feasibility of this method was evaluated by simulation of the settling flux of biodeposition in Maniao Bay,Hainan Province,China,and 20 sampling sites were selected for determining the settling fluxes.At sampling sites P1,P2,P3,P4,P5,Z1,Z2,Z3,Z4,A1,A2,A3,A4,B1,B2,C1,C2,C3 and C4,the measured settling fluxes of biodeposition were 26.02,15.78,10.77,58.16,6.57,72.17,12.37,12.11,106.64,150.96,22.59,11.41,18.03,7.90,19.23,7.06,11.84,5.19 and 2.57 g d^(−1)m^(−2),respectively.The simulated settling fluxes of biodeposition at the corresponding sites were 16.03,23.98,8.87,46.90,4.52,104.77,16.03,8.35,180.83,213.06,39.10,17.47,20.98,9.78,23.25,7.84,15.90,6.06 and 1.65 g d^(−1)m^(−2),respectively.There was a positive correlation between the simulated settling fluxes and measured ones(R=0.94,P=2.22×10^(−9)<0.05),which implies that the spatial differentiation of biodeposition flux was well simulated.Moreover,the posterior difference ratio of the simulation was 0.38,and the small error probability was 0.94,which means that the simulated results reached an acceptable level from the perspective of relative error.Thus,if nonpoint source pollution is simplified to point source pollution and open waters are simplified based on similarity theory,the setting flux of biodeposition in the open waters can be simply and effectively simulated by the fluid simulation software Fluent.

Load Reduction Test Method of Similarity Theory and BP Neural Networks of Large Cranes

Static load tests are an important means of supervising and detecting a crane＇s lift capacity. Due to space restrictions, however, there are difficulties and potential danger when testing large bridge cranes. To solve the loading problems of large-tonnage cranes during testing, an equivalency test is proposed based on the similarity theory and BP neural networks. The maximum stress and displacement of a large bridge crane is tested in small loads, combined with the training neural network of a similar structure crane through stress and displacement data which is collected by a physics simulation progressively loaded to a static load test load within the material scope of work. The maximum stress and displacement of a crane under a static load test load can be predicted through the relationship of stress, displacement, and load. By measuring the stress and displacement of small tonnage weights, the stress and displacement of large loads can be predicted, such as the maximum load capacity, which is 1.25 times the rated capacity. Experimental study shows that the load reduction test method can reflect the lift capacity of large bridge cranes. The load shedding predictive analysis for Sanxia 1200 t bridge crane test data indicates that when the load is 1.25 times the rated lifting capacity, the predicted displacement and actual displacement error is zero. The method solves the problem that lifting capacities are difficult to obtain and testing accidents are easily possible when 1.25 times related weight loads are tested for large tonnage cranes.

Similarity theory based method for MEMS dynamics analysis

A new method for MEMS dynamics analysis is presented,ased on the similarity theory. With this method, two systems' similarities can be captured in terms of physics quantities/governed-equations amongst different energy fields, and then the unknown dynamic characteristics of one of the systems can be analyzed according to the similar ones of the other system. The probability to establish a pair of similar systems among MEMS and other energy systems is also discussed based on the equivalent between mechanics and electrics, and then the feasibility of applying this method is proven by an example, in which the squeezed damping force in MEMS and the current of its equivalent circuit established by this method are compared.

Numerical verification of similar Cam-clay model based on generalized potential theory

From the mathematical principles, the generalized potential theory can be employed to create constitutive model of geomaterial directly. The similar Cam-clay model, which is created based on the generalized potential theory, has less assumptions,clearer mathematical basis, and better computational accuracy. Theoretically, it is more scientific than the traditional Cam-clay models. The particle flow code PFC3 D was used to make numerical tests to verify the rationality and practicality of the similar Cam-clay model. The verification process was as follows: 1) creating the soil sample for numerical test in PFC3 D, and then simulating the conventional triaxial compression test, isotropic compression test, and isotropic unloading test by PFC3D; 2)determining the parameters of the similar Cam-clay model from the results of above tests; 3) predicting the sample's behavior in triaxial tests under different stress paths by the similar Cam-clay model, and comparing the predicting results with predictions by the Cam-clay model and the modified Cam-clay model. The analysis results show that the similar Cam-clay model has relatively high prediction accuracy, as well as good practical value.

A Closure for Isotropic Turbulence Based on Extended Scale Similarity Theory in Physical Space

The closure of a turbulence field is a longstanding fundamental problem, while most closure models are introduced in spectral space. Inspired by Chou＇s quasi-normal closure method in spectral space, we propose an analytical closure model for isotropic turbulence based on the extended scale similarity theory of the velocity structure function in physical space. The assumptions and certain approximations are justified with direct numerical simulation. The asymptotic scaling properties are reproduced by this new closure method, in comparison to the classical Batchelor model.

Observational Evidence for the Monin-Obukhov Similarity under All Stability Conditions

Data collected in the surface layer in a northern suburban area of Nanjing from 15 November to 29 December 2007 were analyzed to examine the MoninObukhov similarity for describing the turbulent fluctu ations of 3D winds under all stability conditions and to obtain the turbulence characteristics under different weather conditions. The results show that the dimensionless standard deviations of turbulent velocity com ponents （σ u /u＊ , σ v /u＊ , σ w /u ＊ ） and dimensionless turbulent kinetic energy （TKE） can be well described by ＂1/3＂ power law relationships under stable, neutral, and unstable conditions, with σ u /u ＊ σ v /u ＊ σ w /u＊ . Land use and land cover changes mainly impact dimensionless standard deviations of horizontal component fluctuations, but they have very little on those of the vertical component. The dimensionless standard devi ations of wind components and dimensionless TKE are remarkably affected by different weather conditions; the deviations of horizontal wind component and dimensionless TKE present fog day clear sky overcast cloudy; the trend of the vertical wind component is the reverse. The surface drag coefficient at a Nan jing suburban measurement site during the observation period was obviously higher than at other reported plains and plateau areas, and was approximately one order larger in magnitude than the reported plains areas. Dimensionless standard deviation of temperature declined with increasing ｜z /L｜ with an approximate ＂1/3＂ slope in unstable stratification and ＂2/3＂ slope in stable stratification.

Scale Effects and a Method for Similarity Evaluation in Micro Electrical Discharge Machining

Electrical discharge machining（EDM） is a promising non-traditional micro machining technology that offers a vast array of applications in the manufacturing industry. However, scale effects occur when machining at the micro-scale, which can make it difficult to predict and optimize the machining performances of micro EDM. A new concept of ＂scale effects＂ in micro EDM is proposed, the scale effects can reveal the difference in machining performances between micro EDM and conventional macro EDM. Similarity theory is presented to evaluate the scale effects in micro EDM. Single factor experiments are conducted and the experimental results are analyzed by discussing the similarity difference and similarity precision. The results show that the output results of scale effects in micro EDM do not change linearly with discharge parameters. The values of similarity precision of machining time significantly increase when scaling-down the capacitance or open-circuit voltage. It is indicated that the lower the scale of the discharge parameter, the greater the deviation of non-geometrical similarity degree over geometrical similarity degree, which means that the micro EDM system with lower discharge energy experiences more scale effects. The largest similarity difference is 5.34 while the largest similarity precision can be as high as 114.03. It is suggested that the similarity precision is more effective in reflecting the scale effects and their fluctuation than similarity difference. Consequently, similarity theory is suitable for evaluating the scale effects in micro EDM. This proposed research offers engineering values for optimizing the machining parameters and improving the machining performances of micro EDM.

IMPROVEMENT TO THE EVAPORATION DUCT MODEL BY INTRODUCING NONLINEAR SIMILARITY FUNCTIONS IN STABLE CONDITIONS

Modified refractivity (M) profile is an important parameter to describe the atmospheric refraction environment,as well as a key factor in uniquely evaluating electromagnetic propagation effects.In order to improve the model-derived M profile in stable (especially very stable) conditions,three nonlinear similarity functions,namely BH91,CB05,SHEBA07,are introduced in this paper to improve the original Babin_V25 model,and the performances of these modified models are verified based on the hydrometeorological observations from tower platforms,which are finally compared with the original Babin_V25 model and Local_HYQ92 model.Results show that introducing nonlinear similarity functions can significantly improve the model-derived M profile;especially,the newly developed SHEBA07 functions manage to reduce the predicted root mean square (rms) differences of M and M slope (for both 0-5m and 5-40m) by 64.5%,16.6%,and 60.4%,respectively in stable conditions.Unfortunately,this improved method reacts little on the evaporation duct height;in contrast,Local_HYQ92 model is capable of reducing the predicted rms differences of M,M slope (for both 0-5m and 5-40m),and evaporation duct height by 76.7%,40.2%,83.7%,and 58.0% respectively.Finally,a new recommendation is made to apply Local_HYQ92 and Babin_SHEBA07 in very stable conditions considering that M slope is more important than evaporation duct height and absolute M value in uniquely determining electromagnetic propagation effects.

Theoretical Study of Similar Experimental Method for Durability of Concrete under Artifi cial Climate Environment

Based on the similarity theory,a new experimentalmethod named Similar ExperimentalMethod for Durability of Concrete（SEMDC）was established.The existing experimentalmethods for durability of concrete were summarized,and the merits and demerits of these experimentalmethods were analyzed.Major factors affecting the durability of concrete were found through literature review.These factors were analyzed and the similarity criteria were established according to the similarity theory,and then the SEMDC was established according to the rules of these criteria.The various influentialfactors of the experimentalmethod were analyzed and the merits and demerits of this new experimentalmethod were discussed.According to SEMDC,changing the geometry shrinkage ratio was the only way to accelerate the test in order to keep the experiment similar to the reality.There were few other parameters which need to be changed in SEMDC,making the test easy to be achieved.According to SEMDC,time shrinkage ratio was the square of geometric shrinkage ratio,so an appropriate increase of the geometric shrinkage ratio could accelerate the test.Finally,an example of experimentaldesign for durability of concrete was devised theoretically base on SEMDC theory.

Design and Research of Similarity and its Serialization of the Flotation Machine's Key Structure

Aiming at the problems such as more repeatedly design and longer design cycle, in this paper, the similarity theory was introduced to the design process of the key structures of flotation machine. The impeller and U-shaped tank of flotation machine system were analyzed as similarity unit. Meanwhile, the level of similarity of the units and the similarity of the system were calculated. Based on the analysis of the impeller and the size of U-shaped tank, the similarity criteria were derived. The derived conclusions are： （1） The relationship between the diameter of the impeller and the volume of the tank was power function and calculated as the similarity criteria of the impeller; （2） The relationship between the ratio between the U-shaped tank＇s cross-sectional area and impeller＇s diameter and the volume of the tank was power function and calculated as the similarity criterions of the U-shaped tank. Using the similarity criterion combined with computer technology and database technology to realize part and system serialization design. The results show that the research can efficiency. avoid repeatedly design, shorten design cycle, and raise the design

旋转条件下基于相似理论U形通道流动阻力研究

In this paper,the numerical simulation method is used to study the flow resistance law of u-shaped channels under rotating conditions based on similarity theory.The study compares three geometric models:real model,completely similar model and incompletely similar model for cooling typical U-shaped channels inside turbine rotating blades.The completely similar model is geometrically 4.8 times magnification of the real model,and the rotation radius ratio of the real model is 5.4 times that of the incomplete similar model.It is found that the friction factor of the completely similar model increases with the rotation number,and the difference varies from 6%to 38%.The friction factor of the model after incomplete similarity amplification decreases with the increase of rotation number,and the difference varies from-2%to-30%.The friction factor of the laboratory imperfectly similar amplification model combined the effects of the above two laws,and the predicted difference was within 12%.This study provides a theoretical basis for subsequent experiments related to flow resistance.

Model test of the cutting properties of a shearer drum

According to similarity theory, we carried out a dimensional analysis of the shearer drum correlation parameters and built similarity criteria. Based on these, similarity models of shearer drums were developed. Simultaneously, based on an estab- lished cutting testbed of the coal and rock, cutting tests of different pick arrangements of the drum models were carried out, where the compressive strength of the analogous cutting material was 2.48 MPa and the drum rotary speed 67.5 r/min. The variance, the mean values, maxima and mean maxima of the torque load were analyzed for different type drum models. Moreover, the relation-ships between the type of pick arrangements and the cutting lump coal percentage were studied. The results indicate that the load fluctuation of the sequence drum is larger than that of the punnett square drum in the cutting process and the lump coal percentage and economic benefits of the sequence drum are inferior to the punnett square drum. We conclude that the punnett square drum is superior to the sequence drum.

Current–voltage characteristics of hydrogen DC plasma torches with different sizes in an external axial magnetic field

Current-voltage （l-V） characteristics of hydrogen DC plasma torches with different sizes in an external axial magnetic field under atmospheric pressure are reported. Three anodes with different diameters are adopted in a 50-kW torch： 25 mm, 30 mm, and 35 nun, respectively. Two different diameters of anodes, that is, 100 mm and 130 mm, are adopted in a 1-MW plasma torch. The arc voltage shows a negative trend with the increase of arc current under the operating regimes. On the contrary, arc voltage shows a positive trend as the flow rate of carder gas increases, and a similar trend is found with increasing the external magnetic flux density. A similarity formula is constructed to correlate the experimental data of the torches mentioned above. Linear fitting shows that the Pearson correlation coefficient is 0.9958.

Systematic Method of Applying Structural Characteristics of Natural Organisms to Mechanical Structures

Structural bionic design lacks mature and scientific theories, and the excellent structural characteristics of natural organisms sometimes cannot be transferred into engineering structures effectively. Aiming at overcoming the existing problems, this paper summarizes three related theories: similarity theory, fuzzy evaluation theory and optimization theory. Based on the related theories, a method of structural bionic design is introduced, which includes four steps: selecting the most useful structural characteristic of natural organism; analyzing the structural characteristic finally chosen for engineering problem; completing the structural bionic design for engineering structure; and verifying the structural bionic design. Similarity theory and fuzzy evaluation theory are employed to achieve Step 1. In Step 2 and Step 3, optimization theory is employed to analyze the parameters of structures. Together with the thoughts of simplification and grouping, optimization theory can reveal the relationship between organism structure and engineering structure, providing a way to structural bionic design. A general evaluation criterion is proposed in Step 4, which is feasible to evaluate the performance of different structures. Finally, based on the method, a structural bionic design of thin-walled cylindrical shell is introduced.

Experiment and Simulation for Articulated Lifting Subsystem of 1000 m Deep Sea Mining System

The experiment system of 1000 m deep sea mining system is built up with the similarity theory. Sine mechanism is used to simulate mining ship to generate lateral shock excitation by ocean wave. Simulation and experiment of spherical joint connecting deep sea mining system has been done in band six marine conditions. The results indicate that the moment of spherical joint connecting deep sea mining is smaller than that of the thread connected ones, the lifting pipe of sphelical joint is ＂flexible pipe＂. The flexural torque of the articulated lifting pipe system in pump and buffer is generally periodic variation with some irregularity, the value is stable on 60 N·S, and it is obviously smaller than that of the fixed lifting pipe system; The total displacement exhibits cyclic variation pattern, and the periodicity of them is longer than that of sea current. The results of experiment and simulation are basically consistent. And the analysis in the paper offers theoretical foundation of 1000 m deep sea mining system in China.

Fuzzy TOPSIS method to primary crusher selection for Golegohar Iron Mine(Iran)

Selection of the crusher required a great deal of design regarding to the mine planning. Selection of suitable primary crusher from all of available primary crushers is a multi-criterion decision making(MCDM) problem. The present work explores the use of technique for order performance by similarity to ideal solution(TOPSIS) with fuzzy set theory to select best primary crusher for Golegohar Iron Mine in Iran. Gyratory, double toggle jaw, single toggle jaw, high speed roll crusher, low speed sizer, impact crusher, hammer mill and feeder breaker crushers have been considered as alternatives. Also, the capacity, feed size, product size, rock compressive strength, abrasion index and application of primary crusher for mobile plants were considered as criteria for solution of this MCDM problem. To determine the order of the alternatives, closeness coefficient is defined by calculating the distances to the fuzzy positive ideal solution(FPIS) and fuzzy negative ideal solution(FNIS). Results of our work based on fuzzy TOPSIS method show that the gyratory is the best primary crusher for the studied mine.

Improvement of surface flux calculation:A study based on measurements over alpine meadow in the eastern Tibet Plateau in summer

An improved flux-gradient relationship between momentum φm（ζ） and sensible heat φh（ζ） is obtained by the use of the observational data over an alpine meadow in the eastern Tibet Plateau, in Maqu of China during the period June to August, 2010. The empirical coefficients of Businger-Dyer type function for the cases of unstable and stable stratification are modified. Non-dimensional vertical gradients of wind and potential temperature are calculated by three fitting func- tions; that is, the log-linear, log-square, and log--cubic functions, respectively. It is found that the von Karman constant approaches 0.4025 and the Prandtl number is about 1.10 based on the measurements in near-neutral conditions, which are within reasonable range proposed in previous studies. The revised flux-gradient profile functions of -1/5 power law for momentum and - 1/3 power law for sensible heat are best fitted in unstable stratification conditions. Meanwhile, 2/5 power law, instead of linear functions, is more appropriate in stable stratification cases for momentum and sensible heat. Com- pared with results from previous studies in which traditional functions are used, the momentum and sensible heat fluxes estimated by the revised profile functions in the current study are much closer to the observations for the unstable and stable stratification conditions.

Winter estimation of surface roughness length over eastern Qinghai-Tibetan Plateau

Based on the Monin-Obulchov similarity theory, a scheme was developed to calculate surface roughness length. Surface roughness length over the eastern Qinghai-Tibetan Plateau during the winter season was then estimated using the scheme and eddy covariance measurement data. Comparisons of estimated and measured wind speeds show that the scheme is feasible to calculate surface roughness length. The estimated roughness lengths at the measurement site during unfrozen, frozen and melted periods are 3.23x10(-3), 2.27x10(-3) and 1.92x10(-3) m, respectively. Surface roughness length demonstrates a deceasing trend with time during the winter season. Thereby, setting the roughness length to be a constant value in numerical models could lead to certain degree of simulation errors. The variation of surface roughness length may be caused by the change in land surface characteristic.

Application of similarity theory in the study of proton exchange membrane fuel cells:a comprehensive review of recent developments and future research requirements

The diversity and complexity of the parameters involved in the modeling of proton exchange membrane fuel cells(PEMFCs)have restricted further research and applications of such cells,and the similarity theory is a promising solution to this problem.The similarity theory is an effective tool to obtain compact and generalized results with the same precision as that of the basic mathematical model.This paper presents a comprehensive review of the application of the similarity theory to most aspects of PEMFCs.The advantages of using the similarity theory,such as generality,reduction in the test effort,convenient comparisons and guidance to scale up the experiment,are discussed and analyzed.Although a number of similarity criteria have been proposed in recent years,the similarity theory is not as widely applied or well accepted in PEMFC research as in the heat transfer and fluid flow domain.The objective of this paper is to demonstrate the feasibility of performing a similarity analysis for such complex systems and encourage researchers to present a dimensionless expression of their results in the follow-up PEMFC research.A key challenge is to use the similarity analysis for a complete gas-water-electricity-heat-mechanics coupled with PEMFC system and obtain the correlation between the dimensionless output voltage/current and input similarity criteria.This review indicates that none of the existing models can achieve this objective,and further research pertaining to this aspect must be performed.Several recommendations to achieve this aim,including a hierarchical classification of the criteria,are provided.

Applying the Theory of Similarity in Distributed Knowledge-Based Systems

In this paper, we attempt to explore the potential applications of the theory similarity (TOS) in the development of distributed knowledge-based systems (KBS). Based on TOS, a functional design for reducing the information incompleteness in a distributed KBS is proposed. of which the dey idea is to remedy the incomplete information by means of analogic estimation. The measuring formulas and rules associated with three types of analogic relations are presented respectively.A framework for implementing the proposed design is given as well.