Modified (2+1)-dimensional displacement shallow water wave system and its approximate similarity solutions

Recently, a new （2＋1）-dimensional shallow water wave system, the （2＋1）-dlmenslonal displacement shallow water wave system （2DDSWWS）, was constructed by applying the variational principle of the analytic mechanics in the Lagrange coordinates. The disadvantage is that fluid viscidity is not considered in the 2DDSWWS, which is the same as the famous Kadomtsev-Petviashvili equation and Korteweg-de Vries equation. Applying dimensional analysis, we modify the 2DDSWWS and add the term related to the fluid viscidity to the 2DDSWWS. The approximate similarity solutions of the modified 2DDSWWS （M2DDSWWS） is studied and four similarity solutions are obtained. For the perfect fluids, the coefficient of kinematic viscosity is zero, then the M2DDSWWS will degenerate to the 2DDSWWS.

Similarity solutions to viscous flow and heat transfer of nanofluid over nonlinearly stretching sheet

The boundary-layer flow and heat transfer in a viscous fluid containing metallic nanoparticles over a nonlinear stretching sheet are analyzed. The stretching velocity is assumed to vary as a power function of the distance from the origin. The governing partial differential equation and auxiliary conditions are reduced to coupled nonlinear ordinary differential equations with the appropriate corresponding auxiliary conditions. The resulting nonlinear ordinary differential equations （ODEs） are solved numerically. The effects of various relevant parameters, namely, the Eckert number Ec, the solid volume fraction of the nanoparticles ~, and the nonlinear stretching parameter n are discussed. The comparison with published results is also presented. Different types of nanoparticles are studied. It is shown that the behavior of the fluid flow changes with the change of the nanoparticles type.

Similarity solutions to a laminar boundary layer problem in power law fluids

A suitable similarity transformation is introduced to reduce the laminarboundary layer equations of power law fluids to a class of singular nonlinear two-point boundaryvalue problems. The kin friction and shear stress distributions for boundary layer flow over amoving flat plate are investigated by utilizing the shooting technique. Results indicate that foreach fixed value of the power law exponent n or the velocity ratio parameter xi, the skin frictionand shear stress decrease with the increasing of n or xi respectively.

SIMILARITY SOLUTION OF SELF-WEIGHT CONSOLIDATION PROBLEM FOR SATURATED SOIL

A more general assumption than that in the classical one-dimensional large strain consolidation theory is adopted and the exact analytical solution of nonlinear finite strain self-weight consolidation based on this assumption is obtained. By applying the same experimental data, the comparison of the solutions of linear and nonlinear finite strain theory, as well as the numerical calculating results based on finite element method is presented. The results of the comparison show that the analytical solution obtained here takes on better agreement with practical cases than that of linear one, and they also show that, compared with the solutions based on nonlinear theory, the settlement and the consolidation degree based on linear theory are smaller.

Similarity solutions of Prandtl mixing length modelled two dimensional turbulent boundary layer equations

The exact similarity solutions of two dimensional laminar boundary layer were obtained by Blasius in 1908,however,for two dimensional turbulent boundary layers,no Blasius type similarity solutions(special exact solutions)have ever been found.In the light of Blasius’pioneer works,we extend Blasius similarity transformation to the two dimensional turbulent boundary layers,and for a special case of flow modelled by Prandtl mixing-length,we successfully transform the two dimensional turbulent boundary layers partial differential equations into a single ordinary differential equation.The ordinary differential equation is numerically solved and some useful quantities are produced.For numerical calculations,a complete Maple code is provided.

Similarity Solutions for Laminar Boundary Layer Flow of Darcian Fluid over Horizontal Plate with a Convective Boundary Condition

This paper considers the problem of hydrodynamics and thermal boundary layers of Darcy flow over horizontal surface embedded in a porous medium. The solutions of such problems for the cases of uniform surface temperature and variable surface temperature have been studied and analysed in many papers. This paper, however, attempts to find similarity solutions for the Darcy flow problem with a convective boundary condition at the plate surface. It is found that the solution is possible when the heat transfer coefficient is proportional to x–2/3. The numerical solutions thus obtained are analyzed for a range of values of the parameter characterizing the hot fluid convection process. Analytical expressions are provided for local surface heat flux and total surface heat transfer rate while the flow variables are discussed graphically.

Similarity Solutions of Unsteady Mixed Convective Boundary Layer Flow of Viscous Incompressible Fluid along Isothermal Horizontal Plate

Unsteady mixed convective boundary layer flow of viscous incompressible fluid along isothermal horizontal plate is analyzed through Similarity Solutions. The governing partial differential equations are transformed into ordinary differential equations using the similarity transformation and solved numerically along with shooting technique. The flow field for the fluid velocity, temperature and concentration at the plate surface are significantly influenced by the governing parameters such as unsteadiness parameter, permeability parameter, Prandtl number, Schmidt number and the other driving parameters. The results show that both fluid velocity and temperature decrease but no significant effect on concentration for the increasing values of Prandtl number. It is also exposed that velocity and concentration is higher at lower Schmidt number for low Prandtl fluid. Finally, the dependency of the Skin-friction co-efficient, Nusselt number and Sherwood number, which are of physical interest, are also illustrated in tabular form for the governing parameters.

On similarity solutions to (2+1)-dispersive long-wave equations

This work is devoted to get a new family of analytical solutions of the(2+1)-coupled dispersive long wave equations propagating in an infinitely long channel with constant depth,and can be observed in an open sea or in wide channels.The solutions are obtained by using the invariance property of the similarity transformations method via one-parameter Lie group theory.The repeated use of the similarity transformations method can transform the system of PDEs into system of ODEs.Under adequate restrictions,the reduced system of ODEs is solved.Numerical simulation is performed to describe the solutions in a physically meaningful way.The profiles of the solutions are simulated by taking an appropriate choice of functions and constants involved therein.In each animation,a frame for dominated behavior is captured.They exhibit elastic multisolitons,single soliton,doubly solitons,stationary,kink and parabolic nature.The results are significant since these have confirmed some of the established results of S.Kumar et al.(2020)and K.Sharma et al.(2020).Some of their solutions can be deduced from the results derived in this work.Other results in the existing literature are different from those in this work.

Exact(1+1)-dimensional Similarity Solutions of the Broadwell Model

The exact (1+1)\|dimensional similarity solutions of the Broadwell model are studied in a concise way. A new type of exact (1+1)\|dimensional similarity solutions of the Broadwell model are obtained. The conclusion that one\|dimensional Broadwell model cannot have multi\|dimensional similarity solutions is proved and the proof is simplified.

Similarity Analytic Solutions of a 3D-Fractal Nanofluid Uncoupled System Optimized by a Fractal Symmetric Tangent Function

The science of strategy(game theory)is known as the optimal decision-making of autonomous and challenging players in a strategic background.There are different strategies to complete the optimal decision.One of these strategies is the similarity technique.Similarity technique is a generalization of the symmetric strategy,which depends only on the other approaches employed,which can be formulated by altering diversities.One of these methods is the fractal theory.In this investigation,we present a new method studying the similarity analytic solution(SAS)of a 3D-fractal nanofluid system(FNFS).The dynamic evolution is completely given by the concept of differential subordination and majorization.Subordination andmajorization relationships are the sets of observable individualities.Game theory can simplify the conditions under which particular sets combine.We offer an explicit construction for the complex possible velocity,energy and thermal functions of two-dimensional fluid flow(the complex variable is suggested in the open unit disk,where the disk is selected at a constant temperature and concentration with uniform velocity).We establish that whenever the 3D-fractal nanofluid systemis approximated by a fractal function,the solution has the same property,so a class of fractal tangent function gives SAS.Finally,we demonstrate some simulations and examples that give the consequences of this methodology.

Similarity Solution for Convection Heat Transfer Due to Marangoni Flow over a Flat Surface

Marangoni convection occurs along any liquid vapor interface that has a surface tension gradient. The surface tension gradient can result from either temperature or concentration gradients along the surface. Marangoni convection is of importance in crystal growth melts and during boiling as it influences the flow around the vapor bubbles. The influence of Marangoni induced convection is more obvious under microgravity but also occurs in earth gravity. This paper presents a similarity solution for Marangoni induced flow for both the velocity and temperature profiles, assuming developing boundary layer flow along a surface with various imposed temperature profiles. The surface velocity, the total flow rate, and the heat transfer characteristics are given for various temperature profiles and various Prandtl numbers. Since the predicted boundary layer thickness would be much less than the diameter of vapor bubbles during nucleate boiling, the bubble surface curvature effects can be neglected and this analysis can also be used as a first estimate of the effect of Marangoni flow around a vapor bubble.

Approximate solutions to MHD Falkner-Skan flow over permeable wall

The magnetohydrodynamic （MHD） Falkner-Skan boundary layer flow over a permeable wall in the presence of a transverse magnetic field is examined. The approximate solutions and skin friction coefficients of the MHD boundary layer flow are obtained by using a method that couples the differential transform method （DTM） with the Pade approximation called DTM-Pade. The approximate solutions are expressed in the form of a power series that can be easily computed with an iterative procedure. The approximate solutions are tabulated, plotted for the values of different parameters and compared with the numerical ones obtained by employing the shooting technique. It is found that the approximate solution agrees very well with the numerical solution, showing the reliability and validity of the present work. Moreover, the effects of various physical parameters on the boundary layer flow are presented graphically and discussed.

Analytical solution of magnetohydrodynamic sink flow

An analytical solution to the famous Falkner-Skan equation for the magnetohydrodynamic （MHD） flow is obtained for a special case, namely, the sink flow with a velocity power index of-1. The solution is given in a closed form. Multiple solution branches are obtained. The effects of the magnetic parameter and the wall stretching parameter are analyzed. Interesting velocity profiles are observed with reversal flow regions even for a stationary wall. These solutions provide a rare case of the Falkner-Skan MHD flow with an analytical closed form formula. They greatly enrich the analytical solution for the celebrated Falkner-Skan equation and provide better understanding of this equation.

Note on Barenblatt power series solution to Boussinesq equation

To the serf-similar analytical solution of the Boussinesq equation of groundwater flow in a semi-infinite porous medium, when the hydraulic head at the boundary behaved like a power of time, Barenblatt obtained a power series solution. However, he listed only the first three coefficients and did not give the recurrent formula among the coefficients. A formal proof of convergence of the series did not appear in his works. In this paper, the recurrent formula for the coefficients is obtained by using the method of power series expansion, and the convergence of the series is proven. The results can be easily understood and used by engineers in the catchment hydrology and baseflow studies as well as to solve agricultural drainage problems.

THE SIMILAR SOLUTIONS OF NONLINEAR HEAT CONDUCTION EQUATION

In reference [1]. the wave solutions of nonlinear heat conduction equation arestudied In it the similar variable ξis wave variable and it is assumed that the heat conduction coefficient is only the function of the similar variable ξIn this paper the author forsakes the above-mentioned restraints and studies the similar solutions of the nonlinear conduction equation from the more general angles .

基于组合赋权-TOPSIS模型的机场运行效率评价

为提高机场运行效率评价结果的科学性和全面性,提出了一种基于组合赋权-TOPSIS(technique for order performance by similarity to ideal solution)模型的机场运行效率评价方法。从机位运行效率、旅客登机效率、飞机滑行效率和协同效率4个维度出发,构建了由航班靠桥率、廊桥周转率、机位变更比例等11个指标组成的机场运行效率评价体系;利用G1法、熵权法分别计算评价指标主观和客观权重,以最小化主客观加权属性偏离程度为目标计算组合权重;使用TOPSIS计算待评价机场综合评价指数。利用该模型分析国内3类共8家机场的运行效率,可以得到各评价对象的运行效率等级和综合排名。结果表明:该模型能够有效探明影响机场运行效率的主要因素,具有一定的参考价值。

面向自愈的智能配电网免疫力评估方法

自愈是智能配电网区别于传统配电网的显著特征,为提高各项自愈技术实用化水平,需要准确掌握智能配电网整体免疫力水平。因此,借鉴人体免疫系统机理,提出了智能配电网免疫系统,包括免疫耐受、免疫自稳、免疫识别、免疫应答和免疫恢复5类功能,在此基础上,提出了基于改进层次分析法与逼近理想解距离法相结合的智能配电网免疫力评估模型构建方法,并构建了智能配电网免疫力评估指标体系以及智能配电网免疫力评估模型。此评估模型能够全面且多层次地考虑影响智能配电网免疫力强弱的各类因素,在实际应用中为智能配电网精细化运维检修和管理提供理论参考。

基于模糊群决策的绿色供应商选择和订单分配方法

随着市场竞争愈发激烈、全球环境日益恶化以及公众环保意识的提高,绿色采购问题受到了广泛关注。现有研究绝大多数聚焦于考虑绿色准则的供应商选择问题,以实现可持续经营。然而,在综合考虑时间、价格和成本等因素的前提下,从适应性强的供应商处获得适当的产品,对于企业来说更为可行和经济,即供应商选择和订单分配。为了解决上述关键问题,提出了一种模糊环境下的多准则群体决策方法。提出了一种基于理想解相似性偏好排序和层次分析法(technique for order of preference by similarity to ideal solution and analytic hierarchy process,TOPSIS-AHP)的模糊排序方法,该方法可根据企业战略灵活调整传统准则和绿色准则的权重。在双目标优化模型中引入供应商排名进行订货,在实现采购绩效最大化的同时,最大限度地降低采购成本。结果表明:所提方法能够有效评价供应商绩效,并优化候选供应商之间的订单分配。

Two-Sided Matching Decision Making with Multi-Attribute Probabilistic Hesitant Fuzzy Sets

In previous research on two-sided matching(TSM)decision,agents’preferences were often given in the form of exact values of ordinal numbers and linguistic phrase term sets.Nowdays,the matching agent cannot perform the exact evaluation in the TSM situations due to the great fuzziness of human thought and the complexity of reality.Probability hesitant fuzzy sets,however,have grown in popularity due to their advantages in communicating complex information.Therefore,this paper develops a TSM decision-making approach with multi-attribute probability hesitant fuzzy sets and unknown attribute weight information.The agent attribute weight vector should be obtained by using the maximum deviation method and Hamming distance.The probabilistic hesitancy fuzzy information matrix of each agent is then arranged to determine the comprehensive evaluation of two matching agent sets.The agent satisfaction degree is calculated using the technique for order preference by similarity to ideal solution(TOPSIS).Additionally,the multi-object programming technique is used to establish a TSM method with the objective of maximizing the agent satisfaction of two-sided agents,and the matching schemes are then established by solving the built model.The study concludes by providing a real-world supply-demand scenario to illustrate the effectiveness of the proposed method.The proposed method is more flexible than prior research since it expresses evaluation information using probability hesitating fuzzy sets and can be used in scenarios when attribute weight information is unclear.

Selecting suitable key supplier for core components during smart complex equipment central-private enterprises collaborative development process:from two different forms of evaluation information and matching perspective

With the development of central-private enterprises integration,selecting suitable key suppliers are able to provide core components for smart complex equipment.We consider selecting suitable key suppliers from matching perspective,for it not only satisfies natural development of smart complex equipment,it is also a good implementation of equipment project in central-private enterprises integration context.In in this paper,we carry out two parts of research,one is evaluation attributes based on comprehensive analysis,and the other is matching process between key suppliers and core components based on the matching attribute.In practical analysis process,we employ comprehensive evaluated analysis methods to acquire relevant attributes for the matching process that follows.In the analysis process,we adopt entropy-maximum deviation method(MDM)-decision-making trial and evaluation laboratory(DEMATEL)-technique for order preference by similarity to an ideal solution(TOPSIS)to obtain a comprehensive analysis.The entropy-MDM is applied to get weight value,DEMATEL is utilized to obtain internal relations,and TOPSIS is adopted to get ideal evaluated solution.We consider aggregating two types of evaluation information according to similarities of smart complex equipment based on the combination between geometric mean and arithmetic mean.Moreover,based on the aforementioned attributes and generalized power Heronian mean operator,we aggregate preference information to acquire relevant satisfaction degree,then combine the constructed matching model to get suitable key supplier.Through comprehensive analysis of selecting suitable suppliers,we know that two-sided matching and information aggregation can provide more research perspectives for smart complex equipment.Through analysis for relevant factors,we find that leading role and service level are also significant for the smart complex equipment development process.