This manuscript presents a dataset detailing a method for purifying monomers. Purification plays a crucial role in every chemical process, as it leads to an improvement in product quality through the removal of impuri...This manuscript presents a dataset detailing a method for purifying monomers. Purification plays a crucial role in every chemical process, as it leads to an improvement in product quality through the removal of impurities. The primary method for monomer purification, like acrylonitrile (AN), is the distillation technique. However, this technique is unsafe and hard to set up or handle. A straightforward, risk-free, low-cost method like the column technique resolves these issues. A simple column technique demonstrated the successful execution of purifying AN. Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analyses confirmed that AN was successfully purified, with purity reaching 99.8%. FTIR spectra revealed changes in the position and intensity of the stretching vibration peaks after purification. Also, the functional groups of the inhibitor monomethyl ether of hydroquinone (MeHQ) were undetected after purification. Furthermore, after purification, NMR spectra revealed the absence of aromatic protons and carbons associated with MeHQ. In conclusion, the column technique is a successful and inexpensive way to purify AN monomers. This makes it useful for a wide range of applications, especially in polymerization reactions where MeHQ needs to be removed to prevent self-polymerization during the initiation process.展开更多
Two severe plastic deformation(SPD)techniques of simple shear extrusion(SSE)and equal channel angular pressing(ECAP)were employed to process an extruded Mg-6Gd-3Y-1.5Ag(wt%)alloy at 553 K for 1,2,4 and 6 passes.The mi...Two severe plastic deformation(SPD)techniques of simple shear extrusion(SSE)and equal channel angular pressing(ECAP)were employed to process an extruded Mg-6Gd-3Y-1.5Ag(wt%)alloy at 553 K for 1,2,4 and 6 passes.The microstructural evolutions were studied by electron back scattered diffraction(EBSD)analysis and transmission electron microscopy(TEM).The initial grain size of 7.5μm in the extruded alloy was reduced to about 1.3μm after 6 SPD passes.Discontinuous dynamic recrystallization was suggested to be operative in both SSE and ECAP,with also a potential contribution of continuous dynamic recrystallization at the early stages of deformation.The difference in the shear strain paths of the two SPD techniques caused different progression rate of dynamic recrystallization(DRX),so that the alloys processed by ECAP exhibited higher fractions of recrystallization and high angle grain boundaries(HAGBs).It was revealed that crystallographic texture was also significantly influenced by the difference in the strain paths of the two SPD methods,where dissimilar basal plane texture components were obtained.The compression tests,performed along extrusion direction(ED),indicated that the compressive yield stress(CYS)and ultimate compressive strength(UCS)of the alloys after both SEE and ECAP augmented continuously by increasing the number of passes.ECAP-processed alloys had lower values of CYS and UCS compared to their counterparts processed by SSE.This difference in the mechanical responses was attributed to the different configurations of basal planes with respect to the loading direction(ED)of each SPD technique.展开更多
This paper studies two-lane asymmetric simple exclusion processes(ASEPs)with an intersection.In the upstream segments of the intersection,one particle can move to the next site with rate 1 if the site is empty,and the...This paper studies two-lane asymmetric simple exclusion processes(ASEPs)with an intersection.In the upstream segments of the intersection,one particle can move to the next site with rate 1 if the site is empty,and the other particle can move forward with rate p in the sites of downstream segments.The parameter p can represent the rate of slowing of motion,and the parameter is introduced to investigate spontaneous symmetry breaking(SSB)phenomenon.Extensive Monte Carlo simulations are carried out.It is shown that three symmetric phases exist and the SSB does not exist in the system.Simple mean field approach in which correlation of sites is ignored is firstly adopted to analyze the system,and the system is divided into four independent segments.It is found that the analytical results deviate from the simulation ones,especially when p is small.In addition,the inexsitence of SSB can only be explained qualitatively.Motivated by this,we carry out the cluster mean field analysis in which correlation of five sites is considered.It is shown that densities of the two upstream segments are equal,which demonstrates that the SSB does not exist.It is also shown that,as expected,the cluster mean field analysis performs much better than the simple mean field analysis.展开更多
Over the last forty years, in vitro fertilization, which has expanded to assisted reproductive technologies (ART), has gone from an experimental procedure to the mainstay of infertility treatment. A technique that onc...Over the last forty years, in vitro fertilization, which has expanded to assisted reproductive technologies (ART), has gone from an experimental procedure to the mainstay of infertility treatment. A technique that once made news with each birth is now responsible for 2% - 3% of the babies born in several nations of the world. This has happened due to significant advances in hormone therapies, culture techniques, and the specialization of equipment designed to support oocytes and embryos. However, for all the advances made to support female fertility, little has changed in male treatment since the advent of intracytoplasmic sperm injection in the early 1990’s. Recently, a number of authors have documented problems with sperm preparation techniques. Some report DNA damage, others membrane and organelle issues, all of which potentially hamper fertilization rates and possibly take-home baby rates. Further, as the clinical workload of ART has increased and staffing shortages have become critical, all labs are looking for simpler, more efficient ways to perform job functions. This study describes a simple, one-step method for preparing semen samples for ART. This new technique minimizes excessive manipulation of the sample compared to current standards and is less likely to cause cell damage. Preliminary results suggest a significant enhancement in recovered sample motility and an optimal sample for ART procedures with minimal sample manipulation.展开更多
A finite time controller with PD-like structure for satellite attitude control is proposed in this paper.The controller is constructed with simple structure based on standard PD controller.The fractional order term is...A finite time controller with PD-like structure for satellite attitude control is proposed in this paper.The controller is constructed with simple structure based on standard PD controller.The fractional order term is designed hence system could both have strong robustness and finite time convergence rate,and the advantage of finite time control and PD control is combined in this paper.System convergence rate is discussed by Lyapunov method,and the constraint on control parameters is given by implementing the coupled term of angular velocity and attitude quaternion.Moreover,the accuracy at steady stage depending on control parameters is given hence system could converge to this field within finite time.System stability and performance is demonstrated by numerical simulation results.展开更多
A lot of combinatorial objects have a natural bialgebra structure. In this paper, we prove that the vector space spanned by labeled simple graphs is a bialgebra with the conjunction product and the unshuffle coproduct...A lot of combinatorial objects have a natural bialgebra structure. In this paper, we prove that the vector space spanned by labeled simple graphs is a bialgebra with the conjunction product and the unshuffle coproduct. In fact, it is a Hopf algebra since it is graded connected. The main conclusions are that the vector space spanned by labeled simple graphs arising from the unshuffle coproduct is a Hopf algebra and that there is a Hopf homomorphism from permutations to label simple graphs.展开更多
Every breeding program that aims to create new and improved cultivars with desired traits mostly relies on information related to genetic diversity.Therefore,molecular characterization of germplasms is important to ob...Every breeding program that aims to create new and improved cultivars with desired traits mostly relies on information related to genetic diversity.Therefore,molecular characterization of germplasms is important to obtain target cultivars with desirable traits.Sweet potato[Ipomoea batatas(L.)Lam]is widely considered the world’s most important crop,with great diversity in morphological and phenotypic traits.The genetic diversity of 20 sweet potato germplasms originating from Bangladesh,CIP,Philippines,Taiwan,and Malaysia were compared,which was accomplished by genetic diversity analysis by exploring 20 microsatellite DNA markers for germplasm characterization and utilization.This information was effective in differentiating or clustering the sweet potato genotypes.A total of 64 alleles were generated using the 20 primers throughout the 20 germplasm samples,with locus IBS97 having the highest number of alleles(5),whereas locus IbU33 had the fewest alleles(2).The alleles varied in size from 105(IbU31)to 213 base pairs(IBS34).The Polymorphism Information Content(PIC)values for the loci IbL46 and IBS97 varied from 0.445 to 0.730.IBS97 has the highest number of effective alleles(3.704),compared to an average of 2.520.The average Shannon’s diversity index(H)was 1.003,ranging from 0.673 in IbU3 to 1.432 in IBS97.The value of gene flow(Nm)varied between 0.000 and 0.005,with an average of 0.003,whereas genetic differentiation(FST-values)ranged between 0.901 and 1.000.The sweet potato germplasm included in this study had a broad genetic base.SP1 vs.SP9 and SP12 vs.SP18 germplasm pairings had the greatest genetic distance(GD=0.965),while SP1 vs.SP2 germplasm couples had the least genetic diversity(GD=0.093).Twenty genotypes were classified into two groups in the UPGMA dendrogram,with 16 genotypes classified as group“A”and the remaining four genotypes,SP10,SP18,SP19,and SP20,classified as group“B.”According to cluster analysis,the anticipated heterozygosity(gene diversity)of Nei(1973)was 0.591 on average.In summary,SSR markers successfully evaluated the genetic relationships among the sweet potato accessions used and generated a high level of polymorphism.The results of the present study will be useful for the management of germplasm,improvement of the current breeding strategies,and the release of new cultivars as varieties.展开更多
The simple modules for electrical Lie algebra of type D5 were investigated.The sufficient and necessary criteria of the simple Z-graded highest weight modules were established by means of determining the singular vect...The simple modules for electrical Lie algebra of type D5 were investigated.The sufficient and necessary criteria of the simple Z-graded highest weight modules were established by means of determining the singular vectors of the Verma modules.The simple highest weight module is isomorphic to either that for the symplectic Lie algebra sp4 or Verma module.展开更多
文摘This manuscript presents a dataset detailing a method for purifying monomers. Purification plays a crucial role in every chemical process, as it leads to an improvement in product quality through the removal of impurities. The primary method for monomer purification, like acrylonitrile (AN), is the distillation technique. However, this technique is unsafe and hard to set up or handle. A straightforward, risk-free, low-cost method like the column technique resolves these issues. A simple column technique demonstrated the successful execution of purifying AN. Fourier transform infrared (FTIR) and nuclear magnetic resonance (NMR) analyses confirmed that AN was successfully purified, with purity reaching 99.8%. FTIR spectra revealed changes in the position and intensity of the stretching vibration peaks after purification. Also, the functional groups of the inhibitor monomethyl ether of hydroquinone (MeHQ) were undetected after purification. Furthermore, after purification, NMR spectra revealed the absence of aromatic protons and carbons associated with MeHQ. In conclusion, the column technique is a successful and inexpensive way to purify AN monomers. This makes it useful for a wide range of applications, especially in polymerization reactions where MeHQ needs to be removed to prevent self-polymerization during the initiation process.
基金This research did not receive any specific grant from funding agencies in the public,commercial,or not-for-profit sectors.
文摘Two severe plastic deformation(SPD)techniques of simple shear extrusion(SSE)and equal channel angular pressing(ECAP)were employed to process an extruded Mg-6Gd-3Y-1.5Ag(wt%)alloy at 553 K for 1,2,4 and 6 passes.The microstructural evolutions were studied by electron back scattered diffraction(EBSD)analysis and transmission electron microscopy(TEM).The initial grain size of 7.5μm in the extruded alloy was reduced to about 1.3μm after 6 SPD passes.Discontinuous dynamic recrystallization was suggested to be operative in both SSE and ECAP,with also a potential contribution of continuous dynamic recrystallization at the early stages of deformation.The difference in the shear strain paths of the two SPD techniques caused different progression rate of dynamic recrystallization(DRX),so that the alloys processed by ECAP exhibited higher fractions of recrystallization and high angle grain boundaries(HAGBs).It was revealed that crystallographic texture was also significantly influenced by the difference in the strain paths of the two SPD methods,where dissimilar basal plane texture components were obtained.The compression tests,performed along extrusion direction(ED),indicated that the compressive yield stress(CYS)and ultimate compressive strength(UCS)of the alloys after both SEE and ECAP augmented continuously by increasing the number of passes.ECAP-processed alloys had lower values of CYS and UCS compared to their counterparts processed by SSE.This difference in the mechanical responses was attributed to the different configurations of basal planes with respect to the loading direction(ED)of each SPD technique.
基金Project supported by the National Natural Science Foundation of China(Grant No.11802003).
文摘This paper studies two-lane asymmetric simple exclusion processes(ASEPs)with an intersection.In the upstream segments of the intersection,one particle can move to the next site with rate 1 if the site is empty,and the other particle can move forward with rate p in the sites of downstream segments.The parameter p can represent the rate of slowing of motion,and the parameter is introduced to investigate spontaneous symmetry breaking(SSB)phenomenon.Extensive Monte Carlo simulations are carried out.It is shown that three symmetric phases exist and the SSB does not exist in the system.Simple mean field approach in which correlation of sites is ignored is firstly adopted to analyze the system,and the system is divided into four independent segments.It is found that the analytical results deviate from the simulation ones,especially when p is small.In addition,the inexsitence of SSB can only be explained qualitatively.Motivated by this,we carry out the cluster mean field analysis in which correlation of five sites is considered.It is shown that densities of the two upstream segments are equal,which demonstrates that the SSB does not exist.It is also shown that,as expected,the cluster mean field analysis performs much better than the simple mean field analysis.
文摘Over the last forty years, in vitro fertilization, which has expanded to assisted reproductive technologies (ART), has gone from an experimental procedure to the mainstay of infertility treatment. A technique that once made news with each birth is now responsible for 2% - 3% of the babies born in several nations of the world. This has happened due to significant advances in hormone therapies, culture techniques, and the specialization of equipment designed to support oocytes and embryos. However, for all the advances made to support female fertility, little has changed in male treatment since the advent of intracytoplasmic sperm injection in the early 1990’s. Recently, a number of authors have documented problems with sperm preparation techniques. Some report DNA damage, others membrane and organelle issues, all of which potentially hamper fertilization rates and possibly take-home baby rates. Further, as the clinical workload of ART has increased and staffing shortages have become critical, all labs are looking for simpler, more efficient ways to perform job functions. This study describes a simple, one-step method for preparing semen samples for ART. This new technique minimizes excessive manipulation of the sample compared to current standards and is less likely to cause cell damage. Preliminary results suggest a significant enhancement in recovered sample motility and an optimal sample for ART procedures with minimal sample manipulation.
基金supported partially by National Natural Science Foundation of China(Project Nos.61903289 and 62073102)。
文摘A finite time controller with PD-like structure for satellite attitude control is proposed in this paper.The controller is constructed with simple structure based on standard PD controller.The fractional order term is designed hence system could both have strong robustness and finite time convergence rate,and the advantage of finite time control and PD control is combined in this paper.System convergence rate is discussed by Lyapunov method,and the constraint on control parameters is given by implementing the coupled term of angular velocity and attitude quaternion.Moreover,the accuracy at steady stage depending on control parameters is given hence system could converge to this field within finite time.System stability and performance is demonstrated by numerical simulation results.
文摘A lot of combinatorial objects have a natural bialgebra structure. In this paper, we prove that the vector space spanned by labeled simple graphs is a bialgebra with the conjunction product and the unshuffle coproduct. In fact, it is a Hopf algebra since it is graded connected. The main conclusions are that the vector space spanned by labeled simple graphs arising from the unshuffle coproduct is a Hopf algebra and that there is a Hopf homomorphism from permutations to label simple graphs.
基金The work was financially supported by National Agricultural Technology Program-II Project(NATP-2)BARC Component Bangladesh Agricultural Research Council,Farmgate,Dhaka-1215+2 种基金Bangladesh Agricultural Research Institute(BARI),Joydebpur,Gazipur 1701The work was partially supported by the Taif University Researchers Supporting Project No.(TURSP-2020/39)Taif University,Taif,Saudi Arabia.
文摘Every breeding program that aims to create new and improved cultivars with desired traits mostly relies on information related to genetic diversity.Therefore,molecular characterization of germplasms is important to obtain target cultivars with desirable traits.Sweet potato[Ipomoea batatas(L.)Lam]is widely considered the world’s most important crop,with great diversity in morphological and phenotypic traits.The genetic diversity of 20 sweet potato germplasms originating from Bangladesh,CIP,Philippines,Taiwan,and Malaysia were compared,which was accomplished by genetic diversity analysis by exploring 20 microsatellite DNA markers for germplasm characterization and utilization.This information was effective in differentiating or clustering the sweet potato genotypes.A total of 64 alleles were generated using the 20 primers throughout the 20 germplasm samples,with locus IBS97 having the highest number of alleles(5),whereas locus IbU33 had the fewest alleles(2).The alleles varied in size from 105(IbU31)to 213 base pairs(IBS34).The Polymorphism Information Content(PIC)values for the loci IbL46 and IBS97 varied from 0.445 to 0.730.IBS97 has the highest number of effective alleles(3.704),compared to an average of 2.520.The average Shannon’s diversity index(H)was 1.003,ranging from 0.673 in IbU3 to 1.432 in IBS97.The value of gene flow(Nm)varied between 0.000 and 0.005,with an average of 0.003,whereas genetic differentiation(FST-values)ranged between 0.901 and 1.000.The sweet potato germplasm included in this study had a broad genetic base.SP1 vs.SP9 and SP12 vs.SP18 germplasm pairings had the greatest genetic distance(GD=0.965),while SP1 vs.SP2 germplasm couples had the least genetic diversity(GD=0.093).Twenty genotypes were classified into two groups in the UPGMA dendrogram,with 16 genotypes classified as group“A”and the remaining four genotypes,SP10,SP18,SP19,and SP20,classified as group“B.”According to cluster analysis,the anticipated heterozygosity(gene diversity)of Nei(1973)was 0.591 on average.In summary,SSR markers successfully evaluated the genetic relationships among the sweet potato accessions used and generated a high level of polymorphism.The results of the present study will be useful for the management of germplasm,improvement of the current breeding strategies,and the release of new cultivars as varieties.
基金Fundamental Research Funds for the Central Universities,China(No.2232021G13)。
文摘The simple modules for electrical Lie algebra of type D5 were investigated.The sufficient and necessary criteria of the simple Z-graded highest weight modules were established by means of determining the singular vectors of the Verma modules.The simple highest weight module is isomorphic to either that for the symplectic Lie algebra sp4 or Verma module.
