Modeling and Simulation Study on Reverse Swirl of Secondary Air in Large Tangentially Fired Boiler

Based on the porosity method and the improved non uniform QUICK scheme, this paper describes a three dimensional computer simulation to predict the flow characteristics in a tangentially fired boiler. The model is applied to a 600?MW boiler modeling under different operating conditions of reverse swirl of secondary air. The numerical results achieve reasonable agreement with experimental data. The calculated results of flow field, the pressure distribution, the relative diameter of tangential circle, angular momentum flux in furnace and the velocity distribution index in horizontal gas pass are analyzed in detail. And then the effects of the reverse swirl of secondary air on flue gas imbalance are discussed. Finally a reasonable operating condition of the reverse swirl of secondary air is presented.

Investigation of gravity influence on EOR and CO_(2) geological storage based on pore-scale simulation

Gravity assistance is a critical factor influencing CO_(2)-Oil mixing and miscible flow during EOR and CO_(2)geological storage.Based on the Navier-Stokes equation,component mass conservation equation,and fluid property-composition relationship,a mathematical model for pore-scale CO_(2) injection in oilsaturated porous media was developed in this study.The model can reflect the effects of gravity assistance,component diffusion,fluid density variation,and velocity change on EOR and CO_(2) storage.For nonhomogeneous porous media,the gravity influence and large density difference help to minimize the velocity difference between the main flow path and the surrounding area,thus improving the oil recovery and CO_(2) storage.Large CO_(2) injection angles and oil-CO_(2) density differences can increase the oil recovery by 22.6% and 4.2%,respectively,and increase CO_(2) storage by 37.9% and 4.7%,respectively.Component diffusion facilitates the transportation of the oil components from the low-velocity region to the main flow path,thereby reducing the oil/CO_(2) concentration difference within the porous media.Component diffusion can increase oil recovery and CO_(2) storage by 5.7% and 6.9%,respectively.In addition,combined with the component diffusion,a low CO_(2) injection rate creates a more uniform spatial distribution of the oil/CO_(2) component,resulting in increases of 9.5% oil recovery and 15.7% CO_(2) storage,respectively.This study provides theoretical support for improving the geological CO_(2) storage and EOR processes.

An integrated split and dummy gates MOSFET with fast turn-off and reverse recovery characteristics

A power MOSFET with integrated split gate and dummy gate(SD-MOS) is proposed and demonstrated by the TCAD SENTAURUS.The split gate is surrounded by the source and shielded by the dummy gate.Consequently,the coupling area between the split gate and the drain electrode is reduced,thus the gate-to-drain charge(Q_(GD)),reverse transfer capacitance(C_(RSS)) and turn-off loss(E_(off)) are significantly decreased.Moreover,the MOS-channel diode is controlled by the dummy gate with ultra-thin gate oxide t_(ox),which can be turned on before the parasitic P-base/N-drift diode at the reverse conduction,then the majority carriers are injected to the N-drift to attenuate the minority injection.Therefore,the reverse recovery charge(Q_(RR)),time(T_(RR)) and peak current(I_(RRM)) are effectively reduced at the reverse freewheeling state.Additionally,the specific on-resistance(R_(on,sp)) and breakdown voltage(BV) are also studied to evaluate the static properties of the proposed SD-MOS.The simulation results show that the Q_(GD) of 6 nC/cm^(2),the C_(RSS) of 1.1 pF/cm^(2) at the V_(DS) of 150 V,the QRR of 1.2 μC/cm^(2) and the R_(on,sp) of 8.4 mΩ·cm^(2) are obtained,thus the figures of merit(FOM) including Q_(GD) ×R_(on,sp) of50 nC·mΩ,E_(off) × R_(on,sp) of 0.59 mJ·mΩ and the Q_(RR) × R_(on,sp) of 10.1 μC·mΩ are achieved for the proposed SD-MOS.

Simulations of Reversed Shear Configuration in EAST

The reversed shear （RS） mode is one of the advanced configurations being considered in EAST. Predictive simulations of EAST reversed shear configuration are carried out using an 1.5D equilibrium evolution code. In order to have the desired monotonic q-profile during a tokamak discharge, a successful preparation phase is required. In our simulation, the plasma current is ramped up from 100 kA to a fiat-top maximum of 1.0 MA for four seconds. An ICRH power of 1 MW is applied until the plasma shape is formed at the moment of 4 s, and then the power is raised to 3 MW. A LHCD power of 3.5 MW is applied from ls to optimize the plasma current density profile. A series of simulations are performed to study the influence of the time of applying the auxiliary heating on the plasma parameters. Based on these simulations, a scheme is proposed and tested for the control of the safety factor profile, which is very useful in real time profile control in tokamak experiments.

Linear gyrokinetic simulations of reversed shear Alfvén eigenmodes and ion temperature gradient modes in DIII-D tokamak

Global linear gyrokinetic simulations using realistic DIII-D tokamak geometry and plasma profiles find co-existence of unstable reversed shear Alfvén eigenmodes(RSAE)with low toroidal mode number n and electromagnetic ion temperature gradient(ITG)instabilities with higher toroidal mode number n.For intermediate n?=?[10,12],RSAE and ITG co-exist and overlap weakly in the radial domain with similar growth rates but different real frequencies.Both RSAE and ITG growth rates decrease less than 5%when compressible magnetic perturbations are neglected in the simulations.The ITG growth rates increase less than 7%when fast ions are not included in the simulations.Finally,the effects of trapped electrons on the RSAE are negligible.

Numerical simulation and experimental research on air reverse circulation bit interior fluid territory

By using fluent fluid engineer emulator software to simulate negative pressure formed inside the injector added in the reverse-circulation sampling drilling bit, at six angles of 15, 30, 45, 60, 75 and 90 degrees. The pressure distributing nephogram and the corresponding numerical value gotten compared with the experiment data received by an injector with 6 angles designed by emulation the conclusion. It has been found that the two values are coincident essentially. The article shows that using emulator technology to design optimizely is credible and simple. The cost is low and the design cycle is short compared with the method through experience and test.

Simulation Analysis of Flue Gas Waste Heat Utilization Retrofit Based on ORC System

Recovery of waste heat from boiler flue gas is an effective way to improve energy utilization efficiency.Taking a heating station heating project as an example,the existing heating system of this heating station was analyzed for its underutilized flue gas waste heat and low energy utilization rate.Rankine cycle is an effective waste heat recovery method,and a steam boiler organic Rankine cycle(ORC)cogeneration waste heat utilization method is proposed.The system model simulation is constructed and verified.First,a thermodynamic model was constructed in MATLAB and five suitable work gases were selected to analyze the effects of evaporation temperature and condensation temperature on the network and thermal efficiency of the waste heat cycle power system.Secondly,the ORC model is invoked in TRNSYS to construct the improved cogeneration system,and the rationality of the remaining heat utilization methods is determined by calculating and analyzing the thermal performance,economy,and environmental protection of the improved system.The simulation results show that the system can generate about 552,000 kWh of electricity per year,and improving the energy utilization rate from 0.72 to 0.78.

Energy Recovery Device with a Fluid Switcher for Seawater Reverse Osmosis System

Energy recovery device （ERD） is an important part of the seawater reverse osmosis （SWRO） desalination system. There are principally two kinds of ERDs, the centrifugal type and the positive displacement （PD） type. The PD type is of extensive concern and is preferred in large-scale plants. In this article, an innovative fluid switcher was presented and a two-cylinder hydraulic energy recovery unit with a lab-scale fluid switcher was set up. Tap water was used as the working medium instead of the actual seawater and brine in SWRO desalination plants. Under steady state operating conditions, the experimental results were obtained on the variations of the pressure and flow rate to and from the energy recovery unit. The hydraulic recovery efficiency （En） of the energy recovery unit with the fluid switcher reached up to 76.83%.

A novel SiC high-k superjunction power MOSFET integrated Schottky barrier diode with improved forward and reverse performance

A new SiC superjunction power MOSFET device using high-k insulator and p-type pillar with an integrated Schottky barrier diode(Hk-SJ-SBD MOSFET)is proposed,and has been compared with the SiC high-k MOSFET(Hk MOSFET),SiC superjuction MOSFET(SJ MOSFET)and the conventional SiC MOSFET in this article.In the proposed SiC Hk-SJ-SBD MOSFET,under the combined action of the p-type region and the Hk dielectric layer in the drift region,the concentration of the N-drift region and the current spreading layer can be increased to achieve an ultra-low specific on-resistance(Ron,sp).The integrated Schottky barrier diode(SBD)also greatly improves the reverse recovery performance of the device.TCAD simulation results indicate that the Ron,sp of the proposed SiC Hk-SJ-SBD MOSFET is 0.67 mΩ·cm^(2)with a 2240 V breakdown voltage(BV),which is more than 72.4%,23%,5.6%lower than that of the conventional SiC MOSFET,Hk SiC MOSFET and SJ SiC MOSFET with the 1950,2220,and 2220V BV,respectively.The reverse recovery time and reverse recovery charge of the proposed MOSFET is 16 ns and18 nC,which are greatly reduced by more than 74%and 94%in comparison with those of all the conventional SiC MOSFET,Hk SiC MOSFET and SJ SiC MOSFET,due to the integrated SBD in the proposed MOSFET.And the trade-off relationship between the Ron,sp and the BV is also significantly improved compared with that of the conventional MOSFET,Hk MOSFET and SJ MOSFET as well as the MOSFETs in other previous literature,respectively.In addition,compared with conventional SJ SiC MOSFET,the proposed SiC MOSFET has better immunity to charge imbalance,which may bring great application prospects.

Coupling pinch analysis and rigorous process simulation for hydrogen networks with light hydrocarbon recovery

In refineries,some hydrogen-rich streams contain considerable light hydrocarbons that are important raw materials for the chemical industry.Integrating hydrogen networks with light hydrocarbon recovery can enhance the reuse of both hydrogen and light hydrocarbons.This work proposes an automated method for targeting hydrogen networks with light hydrocarbon recovery.A pinch-based algebraic method is improved to determine the minimum fresh hydrogen consumption and hydrogen sources fed into the light hydrocarbon recovery unit automatically.Rigorous process simulation is conducted to determine the mass and energy balances of the light hydrocarbon recovery process.The targeting procedures are developed through combination of the improved pinch method and rigorous process simulation.This hybrid method is realized by coupling the Matlab and Aspen HYSYS platforms.A refinery hydrogen network is analyzed to illustrate application of the proposed method.The integration of hydrogen network with light hydrocarbon recovery further reduces fresh hydrogen requirement by463.0 m^(3)·h^(-1) and recovers liquefied petroleum gas and gasoline of 1711.5 kg·h^(-1) and 643 kg·h^(-1),respectively.A payback period of 9.2 months indicates that investment in light hydrocarbon recovery is economically attractive.

Multiphase-field simulation of austenite reversion in medium-Mn steels

Medium-Mn steels have attracted immense attention for automotive applications owing to their outstanding combination of high strength and superior ductility.This steel class is generally characterized by an ultrafine-grained duplex microstructure consisting of ferrite and a large amount of austenite.Such a unique microstructure is processed by intercritical annealing,where austenite reversion occurs in a fine martensitic matrix.In the present study,austenite reversion in a medium-Mn alloy was simulated by the multiphase-field approach using the commercial software MICRESS®coupled with the thermodynamic database TCFE8 and the kinetic database MOBFE2.In particular,a faceted anisotropy model was incorporated to replicate the lamellar morphology of reversed austenite.The simulated microstructural morphology and phase transformation kinetics(indicated by the amount of phase)concurred well with experimental observations by scanning electron microscopy and in situ synchrotron high-energy X-ray diffraction,respectively.

Numerical Simulation of High Concentration Polymer Flooding in Oilfield Development

The field test of high concentration polymer flooding has the characteristics of high cost, long cycle and irreversibility of the reservoir development process. In order to ensure the best development effect of the development block, this paper simulated and calculated the high concentration polymer flooding development case of the polymer flooding pilot test area through numerical simulation research, and selected the best case through the comparison of various development indicators. The simulation results showed that the larger the polymer dosage and the higher the concentration, the better the oil displacement effect. The best injection method in the construction process was the overall injection of high concentration polymer. The test area should implement high concentration polymer oil displacement as soon as possible. The research results provided theoretical guidance for the future development and management of the pilot area.

混动叉车势能与制动能量联合回收系统设计及AMESim-Simulink仿真分析

针对混动叉车频繁升降及起停制动造成能量损耗严重等问题,聚焦混动叉车势能回收与行车时双动力能源分配控制策略能效提升的关键技术,进行了混动叉车势能与制动能量联合回收系统设计。在传统混动叉车并联式混动系统基础上改进优化,运用前向建模思想搭建仿真模型。为实现精准控制液压缸位移,提出了一种模糊PID自适应控制系统;为优化混动叉车在行车时发动机和驱动电机的工作效率并进行制动能量回收,基于发动机最优工作曲线提出一种制动能量回收控制策略。最后基于JB/T 11988—2014制定多种工况,运用AMESim和Simulink进行多种工况下仿真对比试验,验证该方法有效性,实现能量回收效率提升,势能与制动能量联合回收效率最高可达56.86%。

Solution for Hardware-in-the-Loop Radar Netting Simulation Problem by Utilizing Time Reversal Method

A new method of radar netting simulation with hardware-in-the-loop (HWIL) is introduced based on the idea of time reversal. It is the high authenticity, low cost and great simplification in design that the method does provide. Along with several paragraphs about the vital features, the model of probability is explained in an analytical way to find out the feasibility of this method.

Research on Reverse Recovery Transient of Parallel Thyristors for Fusion Power Supply

In nuclear fusion power supply systems, the thyristors often need to be connected in parallel for sustaining large current. However, research on the reverse recovery transient of parallel thyristors has not been reported yet. When several thyristors are connected in parallel,they cannot turn-off at the same moment, and thus the turn-off model based on a single thyristor is no longer suitable. In this paper, an analysis is presented for the reverse recovery transient of parallel thyristors. Parallel thyristors can be assumed as one virtual thyristor so that the reverse recovery current can be modeled by an exponential function. Through equivalent transformation of the rectifier circuit, the commutating over-voltage can be calculated based on Kirchhoff’s equation. The reverse recovery current and commutation over-voltage waveforms are measured on an experiment platform for a high power rectifier supply. From the measurement results, it is concluded that the modeling method is acceptable.

The heat recovery simulation in the system of dry granulation of the steel slag

In present,the wet-based pattern is mainly adopted to deal with the steel slag by steel plant at home and abroad,the wet-based technology has some defects;Wasting of water,pollution of the environment,and the slag has not been fully recycled.This paper presents a new method,which is aimed to realize dry granulation,waste heat recovery and comprehensive utilizing the steel slag.According to the ideas of wind quenching granulation,the heating slag from the converter furnace,was bring to the granulation heat exchange system,through the process of breaking in a container,the granulation heat exchange system has the functions of feeding continuously and heat exchange.The heat air,through the diversion tubes,could be recycled in removing the dust.The granulation slag could be bring to a confined roller,granulating and cooling secondarily.The roller export was connected to a magnetic separator.The separated iron could be recycled,and the remaining slag could also be reused as building materials,in process of stabilization and secondary magnetic separation.The heated air could be guided into the boiler to generate the steam,which can be used to generate electricity,or use as cleaned energy,realizing the target to recycle the waste heat in steel slag.The highlights of the new method are dry granulation and waste heat recovery.This paper states the process of heat exchange between the air and the steel slag in the system of granulation heat exchange in the new technical process.In theory,it has been proved reasonable with the the system of granulation heat exchange,and also the work conditions has been optimized.

Experiment Study of Reverse Demulsifier on Simulated Water Sample Treatment at Different Oscillation Time and Different Concentrations of Drugging

In recent years, the water content of oilfield production fluid is high and there is a large amount of oily sewage. In order to improve the capability of sewage treatment, usually using demulsifier for oily sewage processing. This article uses simulated water sample to test the treatment effect of the optimized reverse demulsifier at different oscillation time. As the increase of action time and oscillation, the average size of droplets increases and the amount of the droplets under 1 μm decreases.

Methods in Oil Recovery Processes and Reservoir Simulation

The exploitation of an oil field is a complex and multidisciplinary task, which demands a lot of prior knowledge, time, and money. A good reservoir characterization is deemed essential in the accomplishment of Enhanced Oil Recovery (EOR) processes in order to estimate accurately the properties of the porous medium affecting the flow properties. Several techniques at a field scale are currently being used to determine these properties, which are time and money consuming. But these alone do not guarantee the success of the project. Reservoir simulation and numerical techniques were then included in the pre-development and follow-up studies as an effective tool to determine the productivity and future behavior of the oil field. As the computational power increased, more advanced and detailed models were developed, including different chemical and physical phenomena. But alongside this process, there was an active research in the area of reservoir simulation, improving the accuracy and efficiency of the numerical schemes used for the flow, transport, and energy equations. The aim of this review is to address the topics described. Firstly, the origin of an oil recovery process, the economic factors and field tests involved are introduced. Secondly, the oil and porous medium origin and characterization as well as an introduction to the fundamental concepts and equations are associated to reservoir simulation. Finally, a brief description and analysis of the techniques are used in reservoir simulation employing finite difference methods, their downsides and possible ways to overcome these problems.

基于SimulationX的泵车臂架液压系统建模与仿真

混凝土泵车臂架液压系统作为泵车三大液压系统之一,且具有势能可回收性,为了研究其势能的回收,有必要对其臂架液压系统进行精确的建模与仿真分析。作者根据某型混凝土泵车的臂架液压系统原理图,通过多学科领域建模、仿真与分析软件SimulationX建立了臂架液压系统的仿真模型,并对系统进行了时域动态仿真分析。结果表明:此负载敏感系统简单、可靠,运行状况良好,符合后续研究势能回收所具备的所有要求。

Multiple vehicle routing problem integrated reverse logistics with fuzzy reverse demands

A new type of vehicle routing problem （VRP）, multiple vehicle routing problem integrated reverse logistics （MVRPRL）, is studied. In this problem, there is delivery or pickup （or both） and uncertain features in the demands of the clients. The deliveries of every client as uncertain parameters are expressed as triangular fuzzy numbers. In order to describe MVRPRL, a multi-objective fuzzy programming model with credibility measure theory is constructed. Then the simulationbased tabu search algorithm combining inter-route and intra-route neighborhoods and embedded restarts are designed to solve it. Computational results show that the tabu search algorithm developed is superior to sweep algorithms and that compared with handling each on separate routes, the transportation costs can be reduced by 43% through combining pickups with deliveries.