Debris flow simulation 2D(DFS 2D):Numerical modelling of debris flows and calibration of friction parameters

Debris flows are rapid mass movements with a mixture of rock,soil and water.High-intensity rainfall events have triggered multiple debris flows around the globe,making it an important concern from the disaster management perspective.This study presents a numerical model called debris flow simulation 2D(DFS 2D)and applicability of the proposed model is investigated through the values of the model parameters used for the reproduction of an occurred debris flow at Yindongzi gully in China on 13 August 2010.The model can be used to simulate debris flows using three different rheologies and has a userfriendly interface for providing the inputs.Using DFS 2D,flow parameters can be estimated with respect to space and time.The values of the flow resistance parameters of model,dry-Coulomb and turbulent friction,were calibrated through the back analysis and the values obtained are 0.1 and 1000 m/s^(2),respectively.Two new methods of calibration are proposed in this study,considering the crosssectional area of flow and topographical changes induced by the debris flow.The proposed methods of calibration provide an effective solution to the cumulative errors induced by coarse-resolution digital elevation models(DEMs)in numerical modelling of debris flows.The statistical indices such as Willmott's index of agreement,mean-absolute-error,and normalized-root-mean-square-error of the calibrated model are 0.5,1.02 and 1.44,respectively.The comparison between simulated and observed values of topographic changes indicates that DFS 2D provides satisfactory results and can be used for dynamic modelling of debris flows.

Two-Dimensional Static Numerical Modeling and Simulation of AlGaN/GaN HEMT

AIGaN/GaN HEMTs are investigated by numerical simulation from the self-consistent solution of Schr6dinger-Poisson-hydrodynamic （HD） systems. The influences of polarization charge and quantum effects are considered in this model. Then the two-dimensional conduction band and electron distribution, electron temperature characteristics, Id versus Vd and Id versus Vg, transfer characteristics and transconductance curves are obtained. Corresponding analysis and discussion based on the simulation results are subsequently given.

Incremental Static Analysis of 2D Flow by Inter-Colliding Point-Particles and Use of Incompressible Rhombic Element

A simple method is proposed, for incremental static analysis of a set of inter-colliding particles, simulating 2D flow. Within each step of proposed algorithm, the particles perform small displacements, proportional to the out-of-balance forces, acting on them. Numerical experiments show that if the liquid is confined within boundaries of a set of inter-communicating vessels, then the proposed method converges to a final equilibrium state. This incremental static analysis approximates dynamic behavior with strong damping and can provide information, as a first approximation to 2D movement of a liquid. In the initial arrangement of particles, a rhombic element is proposed, which assures satisfactory incompressibility of the fluid. Based on the proposed algorithm, a simple and short computer program (a “pocket” program) has been developed, with only about 120 Fortran instructions. This program is first applied to an amount of liquid, contained in a single vessel. A coarse and refined discretization is tried. In final equilibrium state of liquid, the distribution on hydro-static pressure on vessel boundaries, obtained by proposed computational model, is found in satisfactory approximation with corresponding theoretical data. Then, an opening is formed, at the bottom of a vertical boundary of initial vessel, and the liquid is allowed to flow gradually to an adjacent vessel. Almost whole amount of liquid is transferred, from first to second vessel, except of few drops-particles, which remain, in equilibrium, at the bottom of initial vessel. In the final equilibrium state of liquid, in the second vessel, the free surface level of the liquid confirms that the proposed rhombing element assures a satisfactory incompressibility of the fluid.

2D Coupled 3D:A New Numerical Model for Dual - Structured - Aquifer System

This paper points out that a successful numerical simulation is to construct a correct conceptional model which is very dose to the natural condition. A new model, two dimensional coupled three dimensional model (2D -3D ) is presented in the Present paper,which is the most suitable one for the dual - structured - aquifer system. An example of Wenyinghu area is shown.By using the 2D-3D model, a satisfied result of the simulated area is achieved.

Clinical application of improved 2D computer-assisted fluoroscopic navigation through simulating a 3D vertebrae image to guide pedicle screw internal fixation

Objective To study the effect of using improved 2D computer-assisted fluoroscopic navigation through simulating 3D vertebrae image to guide pedicle screw internal fixation.Methods Posterior pedicle screw internal fixation,distraction

Experimental and numerical studies on progressive debonding of grouted rock bolts

Understanding the mechanism of progressive debonding of bolts is of great significance for underground safety.In this paper,both laboratory experiment and numerical simulation of the pull-out tests were performed.The experimental pull-out test specimens were prepared using cement mortar material,and a relationship between the pull-out strength of the bolt and the uniaxial compressive strength(UCS)of cement mortar material specimen was established.The locations of crack developed in the pull-out process were identified using the acoustic emission(AE)technique.The pull-out test was reproduced using 2D Particle Flow Code(PFC^(2D))with calibrated parameters.The experimental results show that the axial displacement of the cement mortar material at the peak load during the test was approximately 5 mm for cement-based grout of all strength.In contrast,the peak load of the bolt increased with the UCS of the confining medium.Under peak load,cracks propagated to less than one half of the anchorage length,indicating a lag between crack propagation and axial bolt load transmission.The simulation results show that the dilatation between the bolt and the rock induced cracks and extended the force field along the anchorage direction;and,it was identified as the major contributing factor for the pull-out failure of rock bolt.

Analysis of effects of front and back surface dopants on silicon vertical multi-junction solar cell by 2D numerical simulation

The silicon vertical multi-junction （VMJ） solar cell has a good potential in high concentration, but it requires high quality front and back surface passivation layers to keep its high efficiency. We try to add dopants into the front and back surfaces of the VMJ cell to release this strict requirement in this work. The effects of recombination velocities, doping types and doping pro- files of front and back surfaces on the performance of the P-type VMJ cell were calculated under 1 sun and 1000 suns. The 2D numerical simulation tool TCAD software was used. The performance of the VMJ cell without front and back surface dopants was also calculated for comparison. It was found that the requirement of high quality front and back surface passivation layers could be released remarkably by adding either N-type or W-type front and back surface dopants. For the two types of front surface dopants, the highest efficiencies of the cells were got by light dopant; for the two types of back surface dopants, the doping type and profile affected little on the performance of the cell in our calculation range. It was also found that the series resistance of the VMJ cell with N-type front surface dopant was decreased by the 2D effect of front surface emitter. The VMJ cell with W-type front surface dopant had the highest efficiency under 1000 suns and the VMJ cell with N-type front surface dopant had the highest efficiency under 1 sun in our calculation range.

Numerical study of atmospheric-pressure argon plasma jet propagating into ambient nitrogen

A 2D axial symmetry fluid model is applied to study the features of an atmospheric-pressure argon(Ar) plasma jet propagating into ambient nitrogen(N_(2)) driven by a pulsed voltage,emphasizing the influence of gas velocity on the dynamic characteristics of the jet. The results show that the Ar jet exhibits a cylindrical-shaped channel and the jet channel gradually shrinks with the increase in propagation length. The jet propagation velocity varies with time. Inside the dielectric tube, the plasma jet accelerates propagation and reaches its maximum value near the nozzle. Exiting the tube, its velocity quickly decreases and when approaching the metal plane,the decrease in jet velocity slows down. The increase in gas speed results in the variation of jet spatial distribution. The electron density presents a solid structure at lower gas flow speeds,whereas an annular structure can be observed under the higher gas flow velocity in the ionization head. The jet length increases with the flow velocity. However, when the flow velocity exceeds a critical value, the increase in the rate of the plasma jet length slows down. In addition, the gas velocity effect on the generation and transport of the reactive particles is also studied and discussed.