To analyze the stress of the guiding & positioning board and the effectiveness of the guiding & positioning device,according to guiding & positioning device's operational principle and structure,the gu...To analyze the stress of the guiding & positioning board and the effectiveness of the guiding & positioning device,according to guiding & positioning device's operational principle and structure,the guiding & positioning board's motion regular was analyzed by diagrammatical method based on 2 postulated conditions.Considering about the working conditions' change,simulations in 5 different kinds of working conditions were done to check the correctness of the motion regulars obtained by diagrammatical method.Simulation results prove that the motion regulars are right,the postulated conditions have no effect on the obtained motion regulars.According to the simulation results,the motion processs's characters were drawn out at the same time.展开更多
Significant aerodynamic engine instability can occur during the operation of marine gas turbines as airflow enters the compressor through a 90°turning and causes inlet distortion.This study adopts the method of s...Significant aerodynamic engine instability can occur during the operation of marine gas turbines as airflow enters the compressor through a 90°turning and causes inlet distortion.This study adopts the method of simulating board equivalence to provide the target distortion flow field for ship compressors.The characteristics of the flow field behind the simulated board are obtained through experiments and numerical simulations,through which the relationship between the height of the simulated board and the total pressure distortion is elucidated.Subsequently,the study summarizes the prediction formula to achieve a distortion prediction of 0.8%–7.8%.In addition,this work analyzes the effects of drilling methods and diameters on flow nonuniformity by drilling holes into the simulation board.The results indicate that drilling holes on the board can weaken the nonuniformity of the flow field within a certain range and change the distribution pattern of total pressure in the cross-section.Furthermore,the total pressure distortion no longer changes significantly when the number of holes is too large.The proposed double simulation board structure is capable of obtaining the following two types of distorted flow fields:symmetrical dual lowpressure zones and low-pressure zones with high distortion intensity at the compressor inlet.The distortion equivalent simulation method proposed in this work can obtain various types of distortion spectra,thereby meeting the distortion parameter requirements for the antidistortion testing of marine engines.展开更多
The splitter is an important component of water-based cooling systems used to extract heat from computer boards.In the present study,the flow characteristics of a 16-splitter structure were numerically simulated and c...The splitter is an important component of water-based cooling systems used to extract heat from computer boards.In the present study,the flow characteristics of a 16-splitter structure were numerically simulated and compared with experimental results to verify the reliability of the numerical simulation method.Accordingly,the concept of splitter structural coefficients was proposed.Based on the results of this study,we recommend a selection range of 5≤k≤6 for the structure factor k of the splitter;after optimization,the maximum deviation of the splitter outlet flow was reduced from the original value of 100%to 8.3%.展开更多
In this paper, a 3D model of a flat circuit board with a heat generating electronic chip mounted on it has been studied numerically. The conjugate heat transfer including the conduction in the chip and convection with...In this paper, a 3D model of a flat circuit board with a heat generating electronic chip mounted on it has been studied numerically. The conjugate heat transfer including the conduction in the chip and convection with the surrounding fluid has been investigated numerically. Computational fluid dynamics using the finite volume method has been used for modeling the conjugate heat transfer through the chip and the circuit board. Conjugate heat transfer has broad applications in engineering and industrial applications in design of cooling off electronic components. Effects of various inlet velocities have been studied on the heat transfer variation and temperature of the circuit board. Numerical results show that the temperature of the chip reduces as the velocity of the inlet fluid flow increases.展开更多
In the present work,the hydrodynamic performance of the double deflector rectangular cambered otter board was studied using wind tunnel experiment,flume tank experiment and numerical simulation.Results showed that the...In the present work,the hydrodynamic performance of the double deflector rectangular cambered otter board was studied using wind tunnel experiment,flume tank experiment and numerical simulation.Results showed that the otter board had a good hydrodynamic performance with the maximum lift-to-drag ratio(K_(MAX) = 3.70).The flow separation occurred when the angle of attack(AOA) was at 45?,which revealed that the double deflector structure of the otter board can delay the flow separation.Numerical simulation results showed a good agreement with experiment ones,and could predict the critical AOA,which showed that it can be used to study the hydrodynamic performance of the otter board with the advantage of flow visualization.However,the drag coefficient in flume tank was much higher than that in wind tunnel,which resulted in a lower lift-to-drag ratio.These may be due to different fluid media between flume tank and wind tunnel,which result in the big difference of the vortexes around the otter board.Given the otter boards are operated in water,it was suggested to apply both flume tank experiment and numerical simulation to study the hydrodynamic performance of otter board.展开更多
基金SRF of HLJ (No.F2004-15)SRF of HIT (No.HIT2003.20)
文摘To analyze the stress of the guiding & positioning board and the effectiveness of the guiding & positioning device,according to guiding & positioning device's operational principle and structure,the guiding & positioning board's motion regular was analyzed by diagrammatical method based on 2 postulated conditions.Considering about the working conditions' change,simulations in 5 different kinds of working conditions were done to check the correctness of the motion regulars obtained by diagrammatical method.Simulation results prove that the motion regulars are right,the postulated conditions have no effect on the obtained motion regulars.According to the simulation results,the motion processs's characters were drawn out at the same time.
基金Supported by the National Natural Science Foundation of China(No.52101348)the National Science and Technology Major Project(Y2019-VIII-0013-0174)the Fundamental Research Funds for the Central Universities(No.3072022JC0301)。
文摘Significant aerodynamic engine instability can occur during the operation of marine gas turbines as airflow enters the compressor through a 90°turning and causes inlet distortion.This study adopts the method of simulating board equivalence to provide the target distortion flow field for ship compressors.The characteristics of the flow field behind the simulated board are obtained through experiments and numerical simulations,through which the relationship between the height of the simulated board and the total pressure distortion is elucidated.Subsequently,the study summarizes the prediction formula to achieve a distortion prediction of 0.8%–7.8%.In addition,this work analyzes the effects of drilling methods and diameters on flow nonuniformity by drilling holes into the simulation board.The results indicate that drilling holes on the board can weaken the nonuniformity of the flow field within a certain range and change the distribution pattern of total pressure in the cross-section.Furthermore,the total pressure distortion no longer changes significantly when the number of holes is too large.The proposed double simulation board structure is capable of obtaining the following two types of distorted flow fields:symmetrical dual lowpressure zones and low-pressure zones with high distortion intensity at the compressor inlet.The distortion equivalent simulation method proposed in this work can obtain various types of distortion spectra,thereby meeting the distortion parameter requirements for the antidistortion testing of marine engines.
文摘The splitter is an important component of water-based cooling systems used to extract heat from computer boards.In the present study,the flow characteristics of a 16-splitter structure were numerically simulated and compared with experimental results to verify the reliability of the numerical simulation method.Accordingly,the concept of splitter structural coefficients was proposed.Based on the results of this study,we recommend a selection range of 5≤k≤6 for the structure factor k of the splitter;after optimization,the maximum deviation of the splitter outlet flow was reduced from the original value of 100%to 8.3%.
文摘为了研究使用矩形钢管连接的新型全预制冷弯薄壁型钢复合墙体的抗侧性能,设计了6个足尺试件,并进行了水平低周往复加载试验,分析了龙骨间距、覆面板类型、单面或双面覆板等因素对新型复合墙体试件抗侧性能的影响.新型墙体的覆面板为OSB板与硅晶钙板.试验结果表明:使用矩形钢管连接的新型复合墙体具有良好的整体抗震性能;单面或双面覆板对墙体抗侧性能影响显著,双面覆板的新型复合墙体的屈服荷载约为单面覆板新型复合墙体的2倍;龙骨间距和覆面板材料对墙体抗侧性能的影响相对较小.在试验基础上,使用OpenSEES软件建立了试验墙体的有限元分析模型,并针对矩形钢管壁厚、周边螺钉间距取值进行了参数分析.参数分析结果表明,矩形钢管连接件壁厚取值推荐为2.5 mm,周边螺钉间距推荐取50~100 mm.
文摘In this paper, a 3D model of a flat circuit board with a heat generating electronic chip mounted on it has been studied numerically. The conjugate heat transfer including the conduction in the chip and convection with the surrounding fluid has been investigated numerically. Computational fluid dynamics using the finite volume method has been used for modeling the conjugate heat transfer through the chip and the circuit board. Conjugate heat transfer has broad applications in engineering and industrial applications in design of cooling off electronic components. Effects of various inlet velocities have been studied on the heat transfer variation and temperature of the circuit board. Numerical results show that the temperature of the chip reduces as the velocity of the inlet fluid flow increases.
基金supported by the National Key Technology R&D Program(No.2013BAD13B03)the Key R&D Project from Science and Technology Department of Zhejiang Province(Nos.2018C02026,2018C02040)+1 种基金the National Natural Science Foundation of China(No.31072246)the Fundamental Research Funds for the Central Universities(No.201564020)
文摘In the present work,the hydrodynamic performance of the double deflector rectangular cambered otter board was studied using wind tunnel experiment,flume tank experiment and numerical simulation.Results showed that the otter board had a good hydrodynamic performance with the maximum lift-to-drag ratio(K_(MAX) = 3.70).The flow separation occurred when the angle of attack(AOA) was at 45?,which revealed that the double deflector structure of the otter board can delay the flow separation.Numerical simulation results showed a good agreement with experiment ones,and could predict the critical AOA,which showed that it can be used to study the hydrodynamic performance of the otter board with the advantage of flow visualization.However,the drag coefficient in flume tank was much higher than that in wind tunnel,which resulted in a lower lift-to-drag ratio.These may be due to different fluid media between flume tank and wind tunnel,which result in the big difference of the vortexes around the otter board.Given the otter boards are operated in water,it was suggested to apply both flume tank experiment and numerical simulation to study the hydrodynamic performance of otter board.
