The bioavailability of five divalent cationic heavy metals （Pb, Cd, Cu, Zn and Ni） in 10 superficial sediment samples from Baihua Lake was assessed based on the molar ratio of simultaneously extracted metals （SEMs...The bioavailability of five divalent cationic heavy metals （Pb, Cd, Cu, Zn and Ni） in 10 superficial sediment samples from Baihua Lake was assessed based on the molar ratio of simultaneously extracted metals （SEMs） to acid volatile sulfide （AVS）. Atomic absorption spectrometry （AAS） and X-ray powder diffraction （XRD） were used to determine the heavy metal concentrations and examine the mineralogy of the crystalline phases, respectively. The AVS loadings in sediments from Baihua Lake ranged from 64.30 to 350.08 ~rnol/g （dry weight）. The corresponding SEM levels for the sampling sites varied from 1.770 to 14.660 vrnol/g. The molar ratio of SEMs to AVS ranged from 0.014 to 0.084 with a mean value of 0.034. The XRD analysis also confirmed the presence of some metal sulfides in sediments from Baihua Lake. The SEMs/AVS ratios for all sampling sites were significantly lower than 1.0, indicating that AVS in the sediments was sufficient to bind the five heavy metals; thus, these heavy metals are currently not significantly bioavailable to benthic organisms. Comparing the SEMs results to published guideline values for metal toxicity to benthic organisms in sediments, however, suggests that Zn and Ni pose a risk at some sampling locations in Baihua Lake.展开更多
Nine elements （As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn） in sediment samples at 7 sites （Site 1-7） from Suzhou Creek in Shanghai were analyzed with the Community Bareau of Reference （BCR） （sequential extraction （SE...Nine elements （As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn） in sediment samples at 7 sites （Site 1-7） from Suzhou Creek in Shanghai were analyzed with the Community Bareau of Reference （BCR） （sequential extraction （SE）） protocol and simultaneously extracted metals （SEM）/acid volatile sulfide （AVS） procedure to assess the metal bioavailability and toxicology in this area. The results showed that the BCR extraction can be utilized as an additional tool with the AVS method for assessing the potential bioavailability and toxicity of metals in sediments. Pollution from S5 （Site 5） was more severe than from other sites, especially Pb, Cu and Zn. Among all the sites, more than 80% of the total concentration of Fe existed in the residual fraction, As, Cr, Mn also dominated in the residual fraction （more than 50%）. While Cd, Ni and Zn （more than 35%） were mainly in the non-stable phase. Cu had a strong affinity with oxidizable phase and Pb varied from site to site. The SEM/AVS ratio was less than one in these sediments and results implied that the majority of Zn and Ni （〉 40%） were bound to AVS. In contrast, Pb, Cu and Cd were little bound to AVS due to their low ration of SEM-Pb, Cu, Cd to corresponding total concentration and relatively high Dorewater concentration.展开更多
In this paper, a kind of three-dimensional analysis technology for characterizing non-metallic inclusions in steel was clearly elaborated. It is an electron microscopy observation, namely the non-aqueous electrolysis ...In this paper, a kind of three-dimensional analysis technology for characterizing non-metallic inclusions in steel was clearly elaborated. It is an electron microscopy observation, namely the non-aqueous electrolysis extraction method with a settled coulometer. In the research,the extraction effects of non-metallic inclusions in different electrolysis systems were studied, and it was concluded that alkalescent 2% TEA non-aqueous electrolyte was applicable for extracting most of non-metallic inclusion particles in steel. And then, in order to ensure the microscopic characterization and statistical calculation of inclusion particles, some electrolysis parameters should be confirmed, such as the size of the sample, control of the electrolysis mass, electric current, etc. Furthermore, for preventing the disturbance of carbides and presenting clear three-dimensional appearance by microscopic characterization, magnetic separation was utilized to separate the inclusion particles from carbides, which was useful for getting more veracious types, particle sizes and chemical composition of inclusions. Moreover, through calculation of quantity and particle size of inclusions in continuous determinate fields, the total quantity per unit volume or area and the particle size distribution of inclusions could be acquired by conversion with electrolysis loss. Besides, the comparison between this method and traditional quantitative metallography was also discussed, and finally, a conclusion was drawn that both of them have respectively applications in characterizing inclusions.展开更多
基金Supported by the National Natural Science Foundation of China(No.20967003)the Project of the Government of Guiyang City(No.[2010]5-2)
文摘The bioavailability of five divalent cationic heavy metals （Pb, Cd, Cu, Zn and Ni） in 10 superficial sediment samples from Baihua Lake was assessed based on the molar ratio of simultaneously extracted metals （SEMs） to acid volatile sulfide （AVS）. Atomic absorption spectrometry （AAS） and X-ray powder diffraction （XRD） were used to determine the heavy metal concentrations and examine the mineralogy of the crystalline phases, respectively. The AVS loadings in sediments from Baihua Lake ranged from 64.30 to 350.08 ~rnol/g （dry weight）. The corresponding SEM levels for the sampling sites varied from 1.770 to 14.660 vrnol/g. The molar ratio of SEMs to AVS ranged from 0.014 to 0.084 with a mean value of 0.034. The XRD analysis also confirmed the presence of some metal sulfides in sediments from Baihua Lake. The SEMs/AVS ratios for all sampling sites were significantly lower than 1.0, indicating that AVS in the sediments was sufficient to bind the five heavy metals; thus, these heavy metals are currently not significantly bioavailable to benthic organisms. Comparing the SEMs results to published guideline values for metal toxicity to benthic organisms in sediments, however, suggests that Zn and Ni pose a risk at some sampling locations in Baihua Lake.
基金supported by the Science Foundation of Shanghai Municipal Commission of Science and Technology （Grant No.04DZ12030-3）, the National High-Technology Research and Development Program of China （Grant No.2005AA60101005）, and the Shanghai Leading Academic Discipline PProject （Grant No.T0105）Project （Grant No.T0105）.
文摘Nine elements （As, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn） in sediment samples at 7 sites （Site 1-7） from Suzhou Creek in Shanghai were analyzed with the Community Bareau of Reference （BCR） （sequential extraction （SE）） protocol and simultaneously extracted metals （SEM）/acid volatile sulfide （AVS） procedure to assess the metal bioavailability and toxicology in this area. The results showed that the BCR extraction can be utilized as an additional tool with the AVS method for assessing the potential bioavailability and toxicity of metals in sediments. Pollution from S5 （Site 5） was more severe than from other sites, especially Pb, Cu and Zn. Among all the sites, more than 80% of the total concentration of Fe existed in the residual fraction, As, Cr, Mn also dominated in the residual fraction （more than 50%）. While Cd, Ni and Zn （more than 35%） were mainly in the non-stable phase. Cu had a strong affinity with oxidizable phase and Pb varied from site to site. The SEM/AVS ratio was less than one in these sediments and results implied that the majority of Zn and Ni （〉 40%） were bound to AVS. In contrast, Pb, Cu and Cd were little bound to AVS due to their low ration of SEM-Pb, Cu, Cd to corresponding total concentration and relatively high Dorewater concentration.
文摘In this paper, a kind of three-dimensional analysis technology for characterizing non-metallic inclusions in steel was clearly elaborated. It is an electron microscopy observation, namely the non-aqueous electrolysis extraction method with a settled coulometer. In the research,the extraction effects of non-metallic inclusions in different electrolysis systems were studied, and it was concluded that alkalescent 2% TEA non-aqueous electrolyte was applicable for extracting most of non-metallic inclusion particles in steel. And then, in order to ensure the microscopic characterization and statistical calculation of inclusion particles, some electrolysis parameters should be confirmed, such as the size of the sample, control of the electrolysis mass, electric current, etc. Furthermore, for preventing the disturbance of carbides and presenting clear three-dimensional appearance by microscopic characterization, magnetic separation was utilized to separate the inclusion particles from carbides, which was useful for getting more veracious types, particle sizes and chemical composition of inclusions. Moreover, through calculation of quantity and particle size of inclusions in continuous determinate fields, the total quantity per unit volume or area and the particle size distribution of inclusions could be acquired by conversion with electrolysis loss. Besides, the comparison between this method and traditional quantitative metallography was also discussed, and finally, a conclusion was drawn that both of them have respectively applications in characterizing inclusions.
