An approximate analytical model for unconventional reservoir considering variable matrix blocks and simultaneous matrix depletion

In regard to unconventional oil reservoirs,the transient dual-porosity and triple-porosity models have been adopted to describe the fluid flow in the complex fracture network.It has been proven to cause inaccurate production evaluations because of the absence of matrix-macrofracture communication.In addition,most of the existing models are solved analytically based on Laplace transform and numerical inversion.Hence,an approximate analytical solution is derived directly in real-time space considering variable matrix blocks and simultaneous matrix depletion.To simplify the derivation,the simultaneous matrix depletion is divided into two parts:one part feeding the macrofractures and the other part feeding the microfractures.Then,a series of partial differential equations(PDEs)describing the transient flow and boundary conditions are constructed and solved analytically by integration.Finally,a relationship between oil rate and production time in real-time space is obtained.The new model is verified against classical analytical models.When the microfracture system and matrix-macrofracture communication is neglected,the result of the new model agrees with those obtained with the dual-porosity and triple-porosity model,respectively.Certainly,the new model also has an excellent agreement with the numerical model.The model is then applied to two actual tight oil wells completed in western Canada sedimentary basin.After identifying the flow regime,the solution suitably matches the field production data,and the model parameters are determined.Through these output parameters,we can accurately forecast the production and even estimate the petrophysical properties.

Simultaneous Identification of Thermophysical Properties of Semitransparent Media Using a Hybrid Model Based on Artificial Neural Network and Evolutionary Algorithm

A hybrid identification model based on multilayer artificial neural networks(ANNs) and particle swarm optimization(PSO) algorithm is developed to improve the simultaneous identification efficiency of thermal conductivity and effective absorption coefficient of semitransparent materials.For the direct model,the spherical harmonic method and the finite volume method are used to solve the coupled conduction-radiation heat transfer problem in an absorbing,emitting,and non-scattering 2D axisymmetric gray medium in the background of laser flash method.For the identification part,firstly,the temperature field and the incident radiation field in different positions are chosen as observables.Then,a traditional identification model based on PSO algorithm is established.Finally,multilayer ANNs are built to fit and replace the direct model in the traditional identification model to speed up the identification process.The results show that compared with the traditional identification model,the time cost of the hybrid identification model is reduced by about 1 000 times.Besides,the hybrid identification model remains a high level of accuracy even with measurement errors.

Sci-tech Simultaneous Interpreter Education Based on Translation Universals Research

The rapid evolution of scientific and technological advancements and industrial changes has profoundly interconnected countries and regions in the digital information era,creating a globalized environment where effective communication is paramount.Consequently,the demand for proficient interpreting skills within the scientific and technology sectors has surged,making effective language communication increasingly crucial.This paper explores the potential impact of translation universals on enhancing sci-tech simultaneous interpreter education.By examining the selection of teaching materials,methods,and activities through the lens of translation universals,this study aims to improve the quality of teaching content,innovate instructional approaches,and ultimately,enhance the effectiveness of interpreter education.The findings of this research are expected to provide valuable insights for curriculum development and pedagogical strategies in interpreter education.

Extended finite element-based cohesive zone method for modeling simultaneous hydraulic fracture height growth in layered reservoirs

In this study,a fully coupled hydromechanical model within the extended finite element method(XFEM)-based cohesive zone method(CZM)is employed to investigate the simultaneous height growth behavior of multi-cluster hydraulic fractures in layered porous reservoirs with modulus contrast.The coupled hydromechanical model is first verified against an analytical solution and a laboratory experiment.Then,the fracture geometry(e.g.height,aperture,and area)and fluid pressure evolutions of multiple hydraulic fractures placed in a porous reservoir interbedded with alternating stiff and soft layers are investigated using the model.The stress and pore pressure distributions within the layered reservoir during fluid injection are also presented.The simulation results reveal that stress umbrellas are easily to form among multiple hydraulic fractures’tips when propagating in soft layers,which impedes the simultaneous height growth.It is also observed that the impediment effect of soft layer is much more significant in the fractures suppressed by the preferential growth of adjoining fractures.After that,the combined effect of in situ stress ratio and fracturing spacing on the multi-fracture height growth is presented,and the results elucidate the influence of in situ stress ratio on the height growth behavior depending on the fracture spacing.Finally,it is found that the inclusion of soft layers changes the aperture distribution of outmost and interior hydraulic fractures.The results obtained from this study may provide some insights on the understanding of hydraulic fracture height containment observed in filed.

Simultaneous Waveform Inverse Modelling for Litho-Fluid Prediction in an Old Marginal, “Agbbo”Field, Onshore Niger Delta, Nigeria

Simultaneous waveform inversion was used to predict lithofacies and fluid type across the field. Very often, characterizing reservoirs in terms of lithology and fluid type using conventional methods is replete with uncertainties, especially in marginal fields. An approach is employed in this study that integrated rock physics and waveform inverse modelling for lithology and fluid-type characterization to appropriately identify potential hydrocarbon saturated zones and their corresponding lithology. Seismic and well-log data were analyzed using Hampson Russel software. The method adopted includes lithofacies and fluid content analysis using rock physics parameters and seismic simultaneous inverse modelling. Rock physics analysis identified 2 broad reservoirs namely: HDZ1 and HDZ2 reservoirs. Results from the inverse modelling showed that low values of acoustic impedance from 19,743 to 20,487 (ft/s)(g/cc) reflect hydrocarbon-bearing reservoirs while medium to high values shows brine and shale respectively, with brine zone ranging from 20,487 to 22,531 (ft/s)(g/cc) and shale above 22,531 (ft/s)(g/cc). Two lithofacies were identified from inversion analysis of Vp/Vs and Mu-Rho, namely: sand and shale with VpVs 1.95 values respectively. Mu-Rho > 12.29 (GPa)(g/cc) and <12.29 (GPa) (g/cc) represent sand and shale respectively. From 3D volume, it was observed that a high accumulation of hydrocarbon was observed to be saturated at the north to the eastern part of the field forming a meandering channel. Sands were mainly distributed around the northeastern to the southwestern part of the field, that tends to be away from Well 029. This was also validated by the volume of rigidity modulus (Mu-Rho) showing high values indicating sands fall within the northeastern part of the field.

Simultaneous inversion of petrophysical parameters based on geostatistical a priori information

The high-resolution nonlinear simultaneous inversion of petrophysical parameters is based on Bayesian statistics and combines petrophysics with geostatistical a priori information. We used the fast Fourier transform–moving average（FFT–MA） and gradual deformation method（GDM） to obtain a reasonable variogram by using structural analysis and geostatistical a priori information of petrophysical parameters. Subsequently, we constructed the likelihood function according to the statistical petrophysical model. Finally, we used the Metropolis algorithm to sample the posteriori probability density and complete the inversion of the petrophysical parameters. We used the proposed method to process data from an oil fi eld in China and found good match between inversion and real data with high-resolution. In addition, the direct inversion of petrophysical parameters avoids the error accumulation and decreases the uncertainty, and increases the computational effi ciency.

Quantitative Relationship Between Simultaneous Color Contrast and Hue Difference in Complex Displays

To investigate quantitatively one of the parametric effects——simultaneous color contrast on color appearance and color difference evaluation in complex displays, a set of center/surround combinations of color stimuli were displayed on a color monitor and the perceived color shifts of test targets induced by its surrounds were measured using binocular matching method while systematically varying hue difference between target and surround. When the hue difference increased, the magnitude of color shift in test target decreased, but the deflection angle of color shift vector from constant hue line increased. Regression analyses of experimental data indicated that the relationship between hue angle difference and the magnitude of perceived color shifts could be described quantitatively by an exponential function, and a linear function could describe quantitative relationship between hue angle difference and deflection angle of color shift vector from constant hue line.

Simultaneous Approximation by Baskakov-Durrmeyer Operator

In this paper, we investigate the degree of approximation by Baskakov_Durrmeyer operator for functions which derivatives have only discontinuity points of the first kind on [0,∞) with exponential growth.

Joint eigenvalue estimation by balanced simultaneous Schur decomposition

The problem of joint eigenvalue estimation for the non-defective commuting set of matrices A is addressed. A procedure revealing the joint eigenstructure by simultaneous diagonalization of. A with simultaneous Schur decomposition （SSD） and balance procedure alternately is proposed for performance considerations and also for overcoming the convergence difficulties of previous methods based only on simultaneous Schur form and unitary transformations, it is shown that the SSD procedure can be well incorporated with the balancing algorithm in a pingpong manner, i. e., each optimizes a cost function and at the same time serves as an acceleration procedure for the other. Under mild assumptions, the convergence of the two cost functions alternately optimized, i. e., the norm of A and the norm of the left-lower part of A is proved. Numerical experiments are conducted in a multi-dimensional harmonic retrieval application and suggest that the presented method converges considerably faster than the methods based on only unitary transformation for matrices which are not near to normality.

Accumulation in simultaneous interpretation： The development of a successful interpreter

Accumulation of vocabulary, knowledge and experience is the foundation of comprehension and expression in simultaneous interpretation. This paper suggests the importance of accumulation in the development of a successful interpreter.

Simultaneous desulfurization and denitrification of sintering flue gas via composite absorbent

Experiments on simultaneous absorption of SO_2 and NO_X from sintering flue gas via a composite absorbent NaClO_2/NaClO were carried out. The effects of various operating parameters such as NaClO_2 concentration(ms), NaClO concentration(mp), molar ratio of NaClO_2/NaClO(M), solution temperature(TR), initial solution pH, gas flow(Vg) and inlet concentration of SO_2(CS) and NO(CN) on the removal efficiencies of SO_2 and NO were discussed. The optimal experimental conditions were determined to be initial solution pH = 6, TR=55 °C and M = 1.3 under which the average efficiencies of desulfurization and denitrification could reach99.7% and 90.8%, respectively. Moreover, according to the analysis of reaction products, it was found that adding NaClO to NaClO_2 aqueous solution is favorable for the generation of ClO_2 and Cl_2 which have significant effect on desulfurization and denitrification. Finally, engineering experiments were performed and obtained good results demonstrating that this method is practicable and promising.

Simultaneous adsorption of lead and cadmium on MnO_2-loaded resin

MnO2-10aded D301 weak basic anion exchange resin has been used as adsorbent to simultaneously remove lead and cadmium ions from aqueous solution. The effects of adsorbent dosage, solution pH and the coexistent ions on the adsorption were investigated. Experimental results showed that with the adsorbent dosage more than 0.6 g/L, both Pb^2＋ and Cd^2＋ were simultaneously removed at pH range 5-6. Except for HPO4^2-, the high concentration coexistent ions such as Na^＋, K^＋, Cl^-, NO3^-, SO4^2- and HCO3^-, showed no significant effect on the removal efficiency of both Pb^2＋ and Cd^2＋ under the experimental conditions. The coexistence of Mg^2＋, Ca^2＋ caused the reduction of Cd^2＋ removal, but not for Pb^2＋. The adsorption equilibrium for Pb^2＋ and Cd^2＋ could be excellently described by the Langmuir isotherm model with R^2 〉 0.99. The maximum adsorption capacity was calculated as 80.64 mg/g for Pb^2＋ and 21.45 mg/g for Cd^2＋. The adsorption processes followed the pseudo first-order kinetics model. MnO2-loaded D301 resin has been shown to have a potential to be used as an effective adsorbent for simultaneous removal of lead and cadmium ions from aqueous solution.

Comparison of Headspace Solid-Phase Microextraction with Simultaneous Steam Distillation Extraction for the Analysis of the Volatile Constituents in Chinese Apricot

Volatile constituents in fully mature fruits of apricot （Prunus armeniaca L.） cultivar Xinshiji were extracted using headspace solid-phase microextraction （HS-SPME） and simultaneous steam distillation extraction （SSDE） and then analyzed using capillary gas chromatography and gas chromatography-mass spectrometry. A total of 70 components were identified by HSSPME, including 20 esters, 19 hydrocarbons, 5 alcohols, 5 ketones, 4 acids, 4 lactones, 3 aldehydes, and 10 miscellaneous components, with the esters being the dominant constituent. On the basis of the odor unit values, it is believed that the following compounds probably contributed to the fresh apricot odor： hexyl acetate, β-ionone, butyl acetate, （E）-2-hexenal, linalool, limonene, γ-decalactone, and hexanal. A total of 49 components were also detected by SSDE, including 13 hydrocarbons, 9 alcohols, 7 aldehydes, 9 esters, 4 ketones, 4 lactones, 2 acids, and 1 miscellaneous component, of which the monoterpene alcohols were the dominant constituents. It could be judged from the odor unit values that the following compounds were the major contributors to boiled apricot aroma： β-ionone, linalool, hexyl acetate, γ-dodecalactone, γ- decalactone, （E）-2-hexenal, hexanal, γ-octalactone, phenylacetaldehyde, butyl acetate, limonene, α-terpineol, and δ-decalactone. The results show that HS-SPME is a simple, rapid, and solvent-free method, which is an alternative to the classical SSDE.

Simultaneous detection of different serum pepsinogens and its primary application

AIM: To develop the simple, rapid and sensitive dual-label time-resolved fluoroimmunoassay for pepsinogens in human serum.METHODS: Based on two-site sandwich protocol, mono-clonal antibodies (McAbs) against pepsinogen Ⅰ (PG Ⅰ) and PG Ⅱ were co-coated in 96 microtitration wells, and tracer McAbs against PG Ⅰ and PG Ⅱ were labeled with europium (Eu) and samarium (Sm) chelate, respectively. Diluted serum samples of Eu3+- and Sm3+-McAbs were added into microtitration wells simultaneously. After washing, fluorescence of bound Sm3+ and Eu3+ tracers was detected. RESULTS: The detection limit was 0.2 μg/L for PG Ⅰ and 0.05 μg/L for PG Ⅱ. The assay range was 5.0-320.0 μg/Lfor PG Ⅰ and 1.0-55.0 μg/L for PG Ⅱ. The average re-covery rate was 102.7% for PG Ⅰ and 98.8% for PG Ⅱ. Sera from healthy controls and patients with gastric dis-ease were analyzed. The PG detected by dual-label as-say was in good agreement with that detected by single-label assay or by enzyme-linked immunosorbent assay. CONCLUSION: Dual-label assay can provide high-throughput serological screening for gastric diseases.

Simultaneous intraductal papillary neoplasms of the bile duct and pancreas treated with chemoradiotherapy

Some authors have suggested that intraductal papillary mucinous neoplasms of the bile duct(IPMN-B) could be the the biliary counterpart of IPMN of the pancreas(IPMN-P) since they share several clinical-pathological features.These include prominent intraductal papil-lary proliferation pattern,a gastrointestinal phenotype,frequent mucin hyper-secretion and progression to mu-cinous carcinoma.To date there are just four reported cases of patients with synchronous IPMN-B and IPMN-P all of which were treated surgically.We hereby report the case of a 76-year-old woman who was incidentally diagnosed with both an asymptomatic 3 cm bulky uid lesion obstructing the bile duct lumen,diagnosed as a malignant IPMN-B,and synchronous multiple pancreatic cystic lesions(10-13 mm) communicating with an irreg-ular Wirsung,diagnosed as branch duct IPMN-P.Since surgery was ruled-out because of the patient's age and preferences,she underwent a conservative manage-ment regimen comprising both chemotherapy and radio-therapy.This was effective in decreasing the mass size and in resolving subsequent jaundice.This is also the f irst reported case of IPMN-B successfully treated with chemoradiotherapy.Clinicians should consider medical treatment as an option in this clinical scenario,in pa-tients who may be unf it for surgery.

Simultaneous nitrification and denitrification in step feeding biological nitrogen removal process

The simultaneous nitrification and denitrification in step-feeding biological nitrogen removal process were investigated under different influent substrate concentrations and aeration flow rates. Biological occurrence of simultaneous nitrification and denitrification was verified in the aspect of nitrogen mass balance and alkalinity. The experimental results also showed that there was a distinct linear relationship between simultaneous nitrification and denitrification and DO concentration under the conditions of low and high aeration flow rate. In each experimental run the floc sizes of activated sludge were also measured and the results showed that simultaneous nitrification and denitrification could occur with very small size of floc.

Simultaneous modulated accelerated radiation therapy for esophageal cancer:A feasibility study

AIM: To establish the feasibility of simultaneous modulated accelerated radiation therapy (SMART) in esophageal cancer (EC).

Alternating shortcut nitrification-denitrification for nitrogen removal from soybean wastewater by SBR with real-time control

A novel treating technology for nitrogen removal from soybean wastewater was studied. The process for nitrogen removal was achieved by alternating aeration and mixing, combined with real\|time control strategies. Results showed that the COD and total nitrogen removal rates are more than 90% and 92% at COD and total nitrogen loads of 1\^0-1\^2 kg COD/(kgMLSS·d) and 0\^20-0\^27 kg TN/(kgMLSS·d), respectively. In addition, it could improve sludge settling property. SVI value is less than 70 g/ml during the whole cycles. The method not only may be adapted to treat soybean wastewater with high nitrogen, but also may be applied to treat other high nitrogen wastewater.

Experimental study on the simultaneous desulfurization and denitrification by duct injection

The highly active absorbent with oxidization based on fly ash, lime and additive was prepared. Experiments of simultaneous desulfurization and denitrification were carried out using fixture bed and duct injection. The influencial factors for the absorptive capacity of the absorbent were studied. The absorptive capacities of 120.7 mg for SO 2 and 43.7 mg for NOx were achieved at a Ca/(S+N) molar ratio 1.2, respectively, corresponding removal efficiencies of 87% and 76%, while spent absorbent appeared in the form of dry powder. The optimal temperature and humidity of flue gas treated with this process were shown to be approximately 50℃, and 5% respectively. The mechanism of removal for SO 2 and NOx was investigated. In comparison with traditional dry FGD, this process appears to have lower cost, less complicated configuration and simpler disposal of used absorbent. The valuable references can be provided for industrial application by this process. The foreground of application will be vast in China and in the world.

Simultaneous hepatic resection benefits patients with synchronous colorectal cancer liver metastases

Objective： The safety of the simultaneous resection of synchronous colorectal cancer liver metastases （SCRLM） is still being debated. However, this simultaneous operative approach is more commonly adopted at present than in the past. Therefore, we compared simultaneous hepatic resection with delayed hepatic resection in this study.Methods： All patients with SCRLM diagnosed before initial treatment between January 2009 and September 2013 were retrospectively included in our study. Short-term and long-term outcomes were compared in patients who underwent simultaneous colorectal and hepatic resection and those treated by delayed hepatectomy.Results： Among the 73 patients diagnosed with SCRLM, simultaneous coloreetal and hepatic resection was performed in 60 patients （82.2%）, while delayed hepatic resection was performed in 13 patients （17.8%）. The mortality rate was zero. The postoperative complication rate after delayed resection was higher than, but not significantly different from, that after simultaneous resection （46% vs. 23%, P=0.166）. The duration of operating time （240 vs. 420 min, P〈0.05） and postoperative hospital stay time （11 vs. 18 days, P〈0.05） were shorter in the simultaneous resection group. After the initial treatments were given, the 1-, 2-, and 3-year survival rates in the simultaneous resection group were 77%, 59%, and 53%, respectively, whereas those in the delayed resection group were 67%, 42%, and 10%, respectively. The 5-year survival rate in the simultaneous resection group was 23%; overall survival differed significantly between the two groups （P=0.037）. Median disease-free survival （DFS） times were 19.1 months in the simultaneous resection group and 8.8 months in the delayed resection group. DFS differed significantly between the two groups. Coenclusions： Simultaneous colorectal and hepatic resection is safe and exhibits advantages in the longtime survival of patients.