Developed a new program structure using in single chip computer system, which based on multitasking mechanism. Discussed the specific method for realization of the new structure. The applied sample is also provided.
Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system u...Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.展开更多
In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontrol...In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontroller as the core,makes use of the gas sensor,A/D converter to detect the alcohol concentration of the breath of the driver,can set different thresholds according to the space of the car model,automatically cut off the ignition circuit for the exceeded threshold,and has the sound and light alarm function,which fundamentally solve the problem of drunk driving.The instrument is compact in size,stable in performance,convenient in installation and debugging,and of practical significance.展开更多
The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the...The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the method is easily subjective,not repeatable,error-prone,and affected by the sorting environment.This paper presents a complete and automated grading system for apples.The system uses a single-chip microcomputer as the controller of the system,and a PC as the graphics processing unit.It also includes a conveyor,drive motor,frequency converter for motor control,photoelectric sensors,air compressor,and air jets for ejecting the graded apples.The classification algorithm is implemented by using a convolutional neural network(CNN).In order to eliminate contact damage of apples,the system specifically uses air jets as actuators to eject the graded apples into the corresponding bins.At the same time,in order to ensure that an apple triggers the correct ejecting actuator,this paper designs a jet controller with proper logic.展开更多
Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhil...Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhile adds the difficulty of designing and building the control system of its power source. In this paper, the method of designing a control system based on Single Chip Microcomputer (SCM) and Field Programmable Gate Array (FPGA) is introduced according to its main requirements. The experimental results show that the control system in this paper achieves the conversion of different working modes, gets exact timing, and realizes the failure protection in 10us thus can be used in the ECRH system.展开更多
Utilizing a high-Q microdisk resonator （MDR） on a single silicon-on-insulator （SOI） chip, a compact microwave photonic filter （MPF） with a continuously tunable central frequency is proposed and experimentally de...Utilizing a high-Q microdisk resonator （MDR） on a single silicon-on-insulator （SOI） chip, a compact microwave photonic filter （MPF） with a continuously tunable central frequency is proposed and experimentally demonstrated. Assisted by the optical single side-band （OSSB） modulation, the optical frequency response of the MDR is mapped to the microwave frequency response to form an MPF with a continuously tunable central frequency and a narrow 3-dB bandwidth. In the experiment, using an MDR with a compact size of 20×20 μm^2 and a high Q factor of 1.07×10^5, we obtain a compact MPF with a high rejection ratio of about 40 dB, a 3-dB bandwidth of about 2 GHz, and a frequency tuning range larger than 12 GHz. Our approach may allow the implementation of very compact, low-cost, low-consumption, and integrated notch MPF in a silicon chip.展开更多
The integrated control system of vehicle ABS/ASR/ACC has been developed using the MC9S12DP256 single chip, which is the new Motorola 16-bit product in HSC12 family. The system including the main control module, the da...The integrated control system of vehicle ABS/ASR/ACC has been developed using the MC9S12DP256 single chip, which is the new Motorola 16-bit product in HSC12 family. The system including the main control module, the data collection module and the drive and fault diagnosis module is demonstrated and its data collection function is presented in detail. The system designed by the modularization can supervise the data, drive the valves and pump. The program can be debugged on line, which is steady and reliable validated by the large numbers of vehicle road tests.展开更多
A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are work...A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process are realized. The plasma spraying system with this control configuration can simplify the spraying operation, improve automation level of spray process, and approach the experience criterion as soon as possible.展开更多
In order to reduce dependence of operating skill ,fuzzy control system is developed, the core of which is a 16 bit Single Chip Microcomputer of Intel 80C196KC.It is realized by software programming. In this system two...In order to reduce dependence of operating skill ,fuzzy control system is developed, the core of which is a 16 bit Single Chip Microcomputer of Intel 80C196KC.It is realized by software programming. In this system two fuzzy controller are designed. The PID parameter self adjusting fuzzy controller is used to compensate welding current deviation in the process of arc voltage optimized control. To obtain the optimum result of ultimate frequency of short circuit transfer, the self optimizing fuzzy controller carries out the arc voltage self optimizing by under the condition of the given welding current. Arc voltage and welding current are kept the optimum matching relationship by two fuzzy controllers.展开更多
Generalized Bent function and generalized Bent function sequences are introduced in this paper.The main performance or these sequences used as SW/SFH(Short Wave/Slow Frequency Hopping) code are studied. And the hardwa...Generalized Bent function and generalized Bent function sequences are introduced in this paper.The main performance or these sequences used as SW/SFH(Short Wave/Slow Frequency Hopping) code are studied. And the hardware circuit and the soflware program flow chart of the SW/SFH PN code generator are also given,which is based on generalized Bent function sequence generator by using a single chip mlcrocomputer.展开更多
A low cost fully integrated single-chip UHF radio frequency identification（RFID） reader SoC for short distance handheld applications is presented.The SoC integrates all building blocks—including an RF transceiver,a...A low cost fully integrated single-chip UHF radio frequency identification（RFID） reader SoC for short distance handheld applications is presented.The SoC integrates all building blocks—including an RF transceiver,a PLL frequency synthesizer,a digital baseband and an MCU—in a 0.18μm CMOS process.A high-linearity RX frontend is designed to handle the large self-interferer.A class-E power amplifier with high power efficiency is also integrated to fulfill the function of a UHF passive RFID reader.The measured maximum output power of the transmitter is 20.28 dBm and the measured receiver sensitivity is-60 dBm.The digital baseband including MCU core consumes 3.91 mW with a clock of 10 MHz and the analog part including power amplifier consumes 368.4 mW.The chip has a die area of 5.1×3.8 mm^2 including pads.展开更多
A low cost integrated transceiver for mobile UHF passive RFID reader applications is implemented in a 0.18μm CMOS process. The transceiver contains an OOK modulator and a power amplifier in the transmitter chain, an ...A low cost integrated transceiver for mobile UHF passive RFID reader applications is implemented in a 0.18μm CMOS process. The transceiver contains an OOK modulator and a power amplifier in the transmitter chain, an IQ direct-down converter, variable-gain amplifiers, channel-select filters and a 10-bit ADC in the receiver chain. The measured output PldB power of the transmitter is 17.6 dBm and the measured receiver sensitivity is -70 dBm. The on-chip integer N synthesizer achieves a frequency resolution of 200 kHz with a phase noise of -104 dBc/Hz at 100 kHz frequency offset and -120.83 dBc/Hz at 1 MHz frequency offset. The transmitter, the receiver and the frequency synthesizer consume 201.34, 25.3 and 54 mW, respectively. The chip has a die area of 4 × 2.5 mm^2 including pads.展开更多
文摘Developed a new program structure using in single chip computer system, which based on multitasking mechanism. Discussed the specific method for realization of the new structure. The applied sample is also provided.
文摘Presents a one grade adaptive controller with one reference model which is built according to δ MRACS adaptive control theory and used to control an actual high order hydraulic system, and the whole hardware system used, which includes a AT89C51 single chip microcomputer, 74Ls373 flip latch, 6116 store, eight bit ADC0809, and so on, and the satisfactory results obtained in study on hydraulic control system.
基金This work was supported by the youth backbone teachers training program of Henan colleges and universities under Grant No.2016ggjs-287the project of science and technology of Henan province under Grant No.172102210124the Key Scientific Research projects in Colleges and Universities in Henan Grant No.18B460003.
文摘In order to prevent drunk driving timely and protect personal safety,a kind of vehicle-loaded alcohol concentration detector based on single chip microcomputer control is designed.The detector usesAT89C51 microcontroller as the core,makes use of the gas sensor,A/D converter to detect the alcohol concentration of the breath of the driver,can set different thresholds according to the space of the car model,automatically cut off the ignition circuit for the exceeded threshold,and has the sound and light alarm function,which fundamentally solve the problem of drunk driving.The instrument is compact in size,stable in performance,convenient in installation and debugging,and of practical significance.
文摘The grading judgment for apples is related to a variety of factors including,size,shape,color,texture,and scars.Traditional manual sorting methods are time consuming and labor intensive.In addition,the accuracy of the method is easily subjective,not repeatable,error-prone,and affected by the sorting environment.This paper presents a complete and automated grading system for apples.The system uses a single-chip microcomputer as the controller of the system,and a PC as the graphics processing unit.It also includes a conveyor,drive motor,frequency converter for motor control,photoelectric sensors,air compressor,and air jets for ejecting the graded apples.The classification algorithm is implemented by using a convolutional neural network(CNN).In order to eliminate contact damage of apples,the system specifically uses air jets as actuators to eject the graded apples into the corresponding bins.At the same time,in order to ensure that an apple triggers the correct ejecting actuator,this paper designs a jet controller with proper logic.
文摘Electron cyclotron resonance heating (ECRH) system is one of the most important Tokamak auxiliary heating methods. However, there are growing demands for ECRH system as the physical experiments progress which meanwhile adds the difficulty of designing and building the control system of its power source. In this paper, the method of designing a control system based on Single Chip Microcomputer (SCM) and Field Programmable Gate Array (FPGA) is introduced according to its main requirements. The experimental results show that the control system in this paper achieves the conversion of different working modes, gets exact timing, and realizes the failure protection in 10us thus can be used in the ECRH system.
基金supported by the National Basic Research Program of China(Grant No.2011CB301704)the Program for New Century Excellent Talents in Ministry of Education of China(Grant No.NCET-11-0168)+1 种基金the Foundation for the Author of National Excellent Doctoral Dissertation of China(Grant No.201139)the National Natural Science Foundation of China(Grant Nos.60901006 and 11174096)
文摘Utilizing a high-Q microdisk resonator （MDR） on a single silicon-on-insulator （SOI） chip, a compact microwave photonic filter （MPF） with a continuously tunable central frequency is proposed and experimentally demonstrated. Assisted by the optical single side-band （OSSB） modulation, the optical frequency response of the MDR is mapped to the microwave frequency response to form an MPF with a continuously tunable central frequency and a narrow 3-dB bandwidth. In the experiment, using an MDR with a compact size of 20×20 μm^2 and a high Q factor of 1.07×10^5, we obtain a compact MPF with a high rejection ratio of about 40 dB, a 3-dB bandwidth of about 2 GHz, and a frequency tuning range larger than 12 GHz. Our approach may allow the implementation of very compact, low-cost, low-consumption, and integrated notch MPF in a silicon chip.
基金Ford-China Research and Development Fund Project(50122148)
文摘The integrated control system of vehicle ABS/ASR/ACC has been developed using the MC9S12DP256 single chip, which is the new Motorola 16-bit product in HSC12 family. The system including the main control module, the data collection module and the drive and fault diagnosis module is demonstrated and its data collection function is presented in detail. The system designed by the modularization can supervise the data, drive the valves and pump. The program can be debugged on line, which is steady and reliable validated by the large numbers of vehicle road tests.
文摘A distributed control system is designed for plasma spraying equipment and the configurations of system software and hardware is discussed. Through founding an expert database, the spraying process parameters are worked out and the initialization and control of spraying process are realized. The plasma spraying system with this control configuration can simplify the spraying operation, improve automation level of spray process, and approach the experience criterion as soon as possible.
文摘In order to reduce dependence of operating skill ,fuzzy control system is developed, the core of which is a 16 bit Single Chip Microcomputer of Intel 80C196KC.It is realized by software programming. In this system two fuzzy controller are designed. The PID parameter self adjusting fuzzy controller is used to compensate welding current deviation in the process of arc voltage optimized control. To obtain the optimum result of ultimate frequency of short circuit transfer, the self optimizing fuzzy controller carries out the arc voltage self optimizing by under the condition of the given welding current. Arc voltage and welding current are kept the optimum matching relationship by two fuzzy controllers.
文摘Generalized Bent function and generalized Bent function sequences are introduced in this paper.The main performance or these sequences used as SW/SFH(Short Wave/Slow Frequency Hopping) code are studied. And the hardware circuit and the soflware program flow chart of the SW/SFH PN code generator are also given,which is based on generalized Bent function sequence generator by using a single chip mlcrocomputer.
基金Project supported by the National High Technology Research and Development Program of China(No.2008AA04A102).
文摘A low cost fully integrated single-chip UHF radio frequency identification（RFID） reader SoC for short distance handheld applications is presented.The SoC integrates all building blocks—including an RF transceiver,a PLL frequency synthesizer,a digital baseband and an MCU—in a 0.18μm CMOS process.A high-linearity RX frontend is designed to handle the large self-interferer.A class-E power amplifier with high power efficiency is also integrated to fulfill the function of a UHF passive RFID reader.The measured maximum output power of the transmitter is 20.28 dBm and the measured receiver sensitivity is-60 dBm.The digital baseband including MCU core consumes 3.91 mW with a clock of 10 MHz and the analog part including power amplifier consumes 368.4 mW.The chip has a die area of 5.1×3.8 mm^2 including pads.
基金Project supported by the National High Technology Research and Development Program of China (Nos.2006AA04A109,2008AA010708)
文摘A low cost integrated transceiver for mobile UHF passive RFID reader applications is implemented in a 0.18μm CMOS process. The transceiver contains an OOK modulator and a power amplifier in the transmitter chain, an IQ direct-down converter, variable-gain amplifiers, channel-select filters and a 10-bit ADC in the receiver chain. The measured output PldB power of the transmitter is 17.6 dBm and the measured receiver sensitivity is -70 dBm. The on-chip integer N synthesizer achieves a frequency resolution of 200 kHz with a phase noise of -104 dBc/Hz at 100 kHz frequency offset and -120.83 dBc/Hz at 1 MHz frequency offset. The transmitter, the receiver and the frequency synthesizer consume 201.34, 25.3 and 54 mW, respectively. The chip has a die area of 4 × 2.5 mm^2 including pads.
