Thermal performance of a single U-tube ground heat exchanger:A parametric study

In this research,the thermal performance of a single U-tube vertical ground heat exchanger is evaluated numerically as a function of the most influential flow parameters,namely,the soil porosity,volumetric heat capacity,and thermal conductivity of the backfill material,inlet volume flow rate,and inlet fluid temperature.The results are discussed in terms of the variations of the heat exchange rate,the effective thermal resistance,and the effectiveness of the ground heat exchanger.They show that the inlet volume flow rate,inlet fluid temperature,and backfill material thermal conductivity have significant effects on the thermal performance of the ground heat exchanger,such that by decreasing the inlet volume flow rate and increasing the backfill material thermal conductivity and inlet fluid temperature,the outlet fluid temperature decreases considerably.On the contrary,the soil porosity and backfill material volumetric heat capacity have negligible effects on the studied ground heat exchanger’s thermal performance.The lowest inlet fluid temperature reaches a the maximum effective thermal resistance of borehole and soil,and consequently the minimum heat transfer rate and effectiveness.Also,multilinear regression analyses are performed to determine the most feasible models able to predict the thermal properties of the single U-tube ground heat exchanger.

The microstructure of a single crystal superalloy after different aging heat treatments

To study the influence of aging heat treatments on the microstructure of single crystal superalloys with high content of refractory elements and optimal the aging heat treatment regimes, a single crystal superalloy containing 22 wt% refractory elements was investigated.Results show that for the experimental alloy, even the homogenization-solution heat treatment for 25 h cannot homogenize the alloying elements completely. During primary aging heat treatment, γ＇ phase grows larger and turns to regular cubes. Higher aging temperature induces larger γ＇ cubes. For specimens with primary aging heat treated at 1120 ℃,γ＇ morphology does not change apparently during secondary aging heat treatment. For specimens with primary aging heat treatment at 1150 ℃,γ＇phase in interdendrite grows obviously comparing with that in dendrites. By analyzing the precipitating kinetics of γ＇phase, it is found that owning to the dendrite segregation and different aging heat treatment temperatures, γ＇ phase at different regions grows under the control of different factors at different aging heat treatment stages. The two controlling factors that are driving forces of phase transformation and element diffusion rate induce obviously different growth rates of γ＇ phase. As a result, the γ＇-precipitating behaviors are variable based on different solute concentrations and aging temperatures. For advanced single crystal superalloys that are supposed to be used at relatively high temperatures, the final γ＇ size after aging heat treatment is suggested to be close to the crossing point of diffusion controlling curve and driving force controlling curve corresponding to the serving temperature. And then,high-temperature properties can be improved.

Temperature and Concentration Fields in a Generator Integrated to Single Stage Heat Transformer Using Water/Carrol Mixture

The generator is the starter device of single stage heat transformer(SSHT) and its characteristics have main effects on the overall efficiency of this kind of absorption machines.This article reports a study of the generation of steam and changes in the concentration of the working solution(Water/Carrol mixture) into a plate heat exchanger as a function of its horizontal and vertical position by gravity effect.It is considered the analysis of six experimental tests;two were evaluated in a plate heat exchanger in a horizontal position and four in a vertical position(90 degree inclination).The generation of steam and increased concentration of the working solution are more sensitive to the vertical position of exchanger than in horizontal position.The results of numerical-experimental analysis indicates that a heat exchanger in horizontal position,the steam generation and the change in the concentration of the working solution occurring in the middle of the plate(or at greater distance depending to the thermodynamic conditions) and instantly in vertical position(at the input of the plate).

Deterministic loading of an individual atom:Towards scalable implementation of multi-qubit

We report the realization of a deterministic single-atom preparation by the method of all-optical feedback. Using a fast-real-time feedback, the light-induced atom desorption effect and blue detuned light-induced atom collision process can increase a success probability of single-atom preparation up to more than 99%. We investigate the dynamics of loading single atom trapped in a trap with a size of hundreds of micrometers into a pair of microscopic tweezers. The detailed experimental results show that the feedback loading is spatially insensitive, which implies that it is possible to use the feedback protocol to simultaneously implement the loading of large number of qubits arrays.

In-phase thermal–mechanical fatigue investigation on hollow single crystal turbine blades

Thermal-mechanical fatigue（TMF）is the primary cause of failure of nickel-based single crystal turbine blades.TMF experiments have been performed on the critical section which is subjected to the most serious damage and determined by numerical calculation combined with service failure experience.An experimental system including the loading,heating,air cooling,water cooling,and control subsystems,is constructed to satisfy the TMF experimental requirements.This experimental system can simulate the stress feld,temperature feld,air cooling process,and TMF spectrum on the critical section under service conditions in a laboratory environment.A metal loading device and a new induction coil are developed to achieve the required stress and temperature distributions on the critical section,respectively.TMF experimental results have indicated that cracks initiated at the trailing edge of the suction surface on the critical section.Based on these experiments,life prediction and failure analysis of hollow single crystal turbine blades can be investigated.