The rapid development of digital education provides new opportunities and challenges for teaching model innovation.This study aims to explore the application of the BOPPPS(Bridge-in,Objective,Pre-assessment,Participat...The rapid development of digital education provides new opportunities and challenges for teaching model innovation.This study aims to explore the application of the BOPPPS(Bridge-in,Objective,Pre-assessment,Participatory learning,Post-assessment,Summary)teaching method in the development of a blended teaching model for the Operations Research course under the background of digital education.In response to the characteristics of the course and the needs of the student group,the teaching design is reconstructed with a student-centered approach,increasing practical teaching links,improving the assessment and evaluation system,and effectively implementing it in conjunction with digital educational technology.This teaching model has shown significant effectiveness in the context of digital education,providing valuable experience and insights for the innovation of the Operations Research course.展开更多
Using Euler’s first-order explicit(EE)method and the peridynamic differential operator(PDDO)to discretize the time and internal crystal-size derivatives,respectively,the Euler’s first-order explicit method–peridyna...Using Euler’s first-order explicit(EE)method and the peridynamic differential operator(PDDO)to discretize the time and internal crystal-size derivatives,respectively,the Euler’s first-order explicit method–peridynamic differential operator(EE–PDDO)was obtained for solving the one-dimensional population balance equation in crystallization.Four different conditions during crystallization were studied:size-independent growth,sizedependent growth in a batch process,nucleation and size-independent growth,and nucleation and size-dependent growth in a continuous process.The high accuracy of the EE–PDDO method was confirmed by comparing it with the numerical results obtained using the second-order upwind and HR-van methods.The method is characterized by non-oscillation and high accuracy,especially in the discontinuous and sharp crystal size distribution.The stability of the EE–PDDO method,choice of weight function in the PDDO method,and optimal time step are also discussed.展开更多
In this article, we define the arithmetic operations of generalized trapezoidal picture fuzzy numbers by vertex method which is assembled on a combination of the (α, γ, β)-cut concept and standard interval analysis...In this article, we define the arithmetic operations of generalized trapezoidal picture fuzzy numbers by vertex method which is assembled on a combination of the (α, γ, β)-cut concept and standard interval analysis. Various related properties are explored. Finally, some computations of picture fuzzy functions over generalized picture fuzzy variables are illustrated by using our proposed technique.展开更多
Three experiments of static state storage method, low-temperature and constant-pressure storage method and low-temperature and constant-pressure storage method were carried out to investigate which method was best in ...Three experiments of static state storage method, low-temperature and constant-pressure storage method and low-temperature and constant-pressure storage method were carried out to investigate which method was best in gas hydrate. The relationships of hydrate rate, capacity and liquid temperature versus time were derived and three results were contrasted. The experimental results show lowtemperature and constant-pressure method is better than the other two methods because it's operation period is shorter and storage capacity is larger than the other two. Low-temperature and constant-pressure method is the best method. So new method will be new research objective.展开更多
Supply chain management is an essential part of an organisation's sustainable programme.Understanding the concentration of natural environment,public,and economic influence and feasibility of your suppliers and pu...Supply chain management is an essential part of an organisation's sustainable programme.Understanding the concentration of natural environment,public,and economic influence and feasibility of your suppliers and purchasers is becoming progressively familiar as all industries are moving towards a massive sustainable potential.To handle such sort of developments in supply chain management the involvement of fuzzy settings and their generalisations is playing an important role.Keeping in mind this role,the aim of this study is to analyse the role and involvement of complex q-rung orthopair normal fuzzy(CQRONF)information in supply chain management.The major impact of this theory is to analyse the notion of confidence CQRONF weighted averaging,confidence CQRONF ordered weighted averaging,confidence CQRONF hybrid averaging,confidence CQRONF weighted geometric,confidence CQRONF ordered weighted geometric,confidence CQRONF hybrid geometric operators and try to diagnose various properties and results.Furthermore,with the help of the CRITIC and VIKOR models,we diagnosed the novel theory of the CQRONF-CRITIC-VIKOR model to check the sensitivity analysis of the initiated method.Moreover,in the availability of diagnosed operators,we constructed a multi-attribute decision-making tool for finding a beneficial sustainable supplier to handle complex dilemmas.Finally,the initiated operator's efficiency is proved by comparative analysis.展开更多
Sea-ice is an important operational item for real timely monitoring and forecasting marine environment of China. This paper introduces an operational method of satellite remote sensing to monitor sea- ice using quanti...Sea-ice is an important operational item for real timely monitoring and forecasting marine environment of China. This paper introduces an operational method of satellite remote sensing to monitor sea- ice using quantitative data of NOAA, and its contents include computer processing of AVHRR sounding data of NOAA and its program design, imagery processing of sea-ice imagery from satellite and their thematic analysis. The sea-ice satellite colour imageries processed via this software system are able to interpret sea-ice pattern, characterizing it by thickness, maximum position of ice boundary, floe concentration and dynamic process of ice changing. At the same time, analyses of the ice condition of the Bohai Sea for the two-year period (1986-1988) as monitored by satellite have been summarized.展开更多
The controlled volume method of operation is especially suitable for large-scale water delivery canal system with complex operation requirements. An operating simulation model based on the storage volume control metho...The controlled volume method of operation is especially suitable for large-scale water delivery canal system with complex operation requirements. An operating simulation model based on the storage volume control method for multi-reach canal system in series was established. In allusion to the deficiency of existing controlled volume algorithm, the improved controlled volume algorithm of the whole canal pools was proposed, and the simulation results indicated that the storage volume and water level of each canal pool could be accurately controlled after the improved algorithm had been adopted. However, for some typical discharge demand operating conditions, if the previously mentioned algorithm was adopted, then it certainly would cause some unnecessary gate adjustments, and consequently the disturbed canal pools would be increased. Therefore, the idea of controlled volume operation method of continuous canal pools was proposed, and corresponding algorithm was designed. Through simulating practical project, the results indicated that the new controlled volume algorithm proposed for typical operating conditions could comparatively and obviously reduce the number of regulated check gates and disturb canal pools for some typical discharge demand operating conditions, thus the control efficiency of canal system could be improved.展开更多
Through analysis of operational evaluation factors for tide forecasting, the relationship between the evaluation factors and the weights of forecasters was examined. A tide forecasting method based on dynamic weight d...Through analysis of operational evaluation factors for tide forecasting, the relationship between the evaluation factors and the weights of forecasters was examined. A tide forecasting method based on dynamic weight distribution for operational evaluation was developed, and multiple-forecaster synchronous forecasting was realized while avoiding the instability cased by only one forecaster. Weights were distributed to the forecasters according to each one's forecast precision. An evaluation criterion for the professional level of the forecasters was also built. The eligibility rates of forecast results demonstrate the skill of the forecasters and the stability of their forecasts. With the developed tide forecasting method, the precision and reasonableness of tide forecasting are improved. The application of the present method to tide forecasting at the Huangpu Park tidal station demonstrates the validity of the method.展开更多
Matching optimization of resonant parameters among the high power inverters,low power transformers and plasma reactors have significant effects on the performance and output of the reactor array when applying the part...Matching optimization of resonant parameters among the high power inverters,low power transformers and plasma reactors have significant effects on the performance and output of the reactor array when applying the partitioned operation method.In this paper,the Matlab/Simulink electrical model was established based on the method of partitioned operation.The matching relation between resonant parameters is analyzed on the basis of experimental result.As a consequence,transformer leakage inductance and working frequency are the important parameters influencing the operational efficiency of system,leakage inductance of transformer should be adjusted based on the equivalent capacitance of plasma reactor to realize the matching optimization of resonant parameters.展开更多
The present work proposed a new method for the modeling by the finite element method of the acoustic propagation problems in infinite axisymmetric cylindrical guides lined with locally reacting absorbent materials wit...The present work proposed a new method for the modeling by the finite element method of the acoustic propagation problems in infinite axisymmetric cylindrical guides lined with locally reacting absorbent materials without flow. The method deals with the development of an efficient transparent boundary condition based on DtN operators. The method developed in this study is successfully applied to a straight axisymmetric lined guide by imposing a mode on one of the artificial boundaries of the truncated guide. The results are in good agreement with analytical solutions. Applying the method for a non-uniform axisymmetric lined guide which is a complex case, proved its effectiveness and the results compared to those of PML layers are in very good agreement.展开更多
We propose a symplectic partitioned Runge-Kutta (SPRK) method with eighth-order spatial accuracy based on the extended Hamiltonian system of the acoustic waveequation. Known as the eighth-order NSPRK method, this te...We propose a symplectic partitioned Runge-Kutta (SPRK) method with eighth-order spatial accuracy based on the extended Hamiltonian system of the acoustic waveequation. Known as the eighth-order NSPRK method, this technique uses an eighth-orderaccurate nearly analytic discrete (NAD) operator to discretize high-order spatial differentialoperators and employs a second-order SPRK method to discretize temporal derivatives.The stability criteria and numerical dispersion relations of the eighth-order NSPRK methodare given by a semi-analytical method and are tested by numerical experiments. We alsoshow the differences of the numerical dispersions between the eighth-order NSPRK methodand conventional numerical methods such as the fourth-order NSPRK method, the eighth-order Lax-Wendroff correction (LWC) method and the eighth-order staggered-grid (SG)method. The result shows that the ability of the eighth-order NSPRK method to suppress thenumerical dispersion is obviously superior to that of the conventional numerical methods. Inthe same computational environment, to eliminate visible numerical dispersions, the eighth-order NSPRK is approximately 2.5 times faster than the fourth-order NSPRK and 3.4 timesfaster than the fourth-order SPRK, and the memory requirement is only approximately47.17% of the fourth-order NSPRK method and 49.41% of the fourth-order SPRK method,which indicates the highest computational efficiency. Modeling examples for the two-layermodels such as the heterogeneous and Marmousi models show that the wavefields generatedby the eighth-order NSPRK method are very clear with no visible numerical dispersion.These numerical experiments illustrate that the eighth-order NSPRK method can effectivelysuppress numerical dispersion when coarse grids are adopted. Therefore, this methodcan greatly decrease computer memory requirement and accelerate the forward modelingproductivity. In general, the eighth-order NSPRK method has tremendous potential value forseismic exploration and seismology research.展开更多
A novel nonlocal operator theory based on the variational principle is proposed for the solution of partial differential equations.Common differential operators as well as the variational forms are defined within the ...A novel nonlocal operator theory based on the variational principle is proposed for the solution of partial differential equations.Common differential operators as well as the variational forms are defined within the context of nonlocal operators.The present nonlocal formulation allows the assembling of the tangent stiffness matrix with ease and simplicity,which is necessary for the eigenvalue analysis such as the waveguide problem.The present formulation is applied to solve the differential electromagnetic vector wave equations based on electric fields.The governing equations are converted into nonlocal integral form.An hourglass energy functional is introduced for the elimination of zeroenergy modes.Finally,the proposed method is validated by testing three classical benchmark problems.展开更多
AIM: To evaluate the clinical application of serial operations with preservation of spleen.METHODS: Serial operations with preserving spleen were performed on 211 cases in our hospital from 1980 to 2000.The patient...AIM: To evaluate the clinical application of serial operations with preservation of spleen.METHODS: Serial operations with preserving spleen were performed on 211 cases in our hospital from 1980 to 2000.The patient's age ranged from 13 to 56 years, averaging 3years. Diseases included splenic injury in 171 cases, portal hypertension in 9 cases, splenic cyst in 10 cases, and the lesion of pancreatic body and tail in 21 cases.RESULTS: All the cases were cured, and 129 patients were followedup from 3 months to 3 years with the leukocyte phagocytosis test, detection of immunoglubin, CT, 99mTc scanning and ultrasonogrsphy. The results were satisfactory.CONCLUSION: The operations with preserving spleen were safe, feasible, and worth of clinical application.展开更多
This study proposes a method for measuring the operational current of high temperature superconducting(HTS)non‐insulation(NI)closed‐loop coils,which operate in the steady persistent‐current‐mode(PCM).HTS NI closed...This study proposes a method for measuring the operational current of high temperature superconducting(HTS)non‐insulation(NI)closed‐loop coils,which operate in the steady persistent‐current‐mode(PCM).HTS NI closed‐loop coils are promising for many easily‐quenching direct‐current(DC)applications,where their performance is determined by magnetomotive forces,total number of turns,and dimensions.As the primary interface parameter in an application system,the operational current must be accurately and rapidly measured.Generally,this is achieved by dividing the measured magnetic field by the coil constant.However,even if the influence of the screening current induced field(SCIF)is not considered,existing methods for the coil constant may be disturbed by the performance and location of Hall sensors,or experience a long measuring period.Therefore,a relatively accurate and fast method is proposed in this study,which is based on adjusting the output current of the adjustable power supply and monitoring the coil voltage as an indicator.The proposed method was validated through experiments and simulations using an equivalent circuit model coupled with a finite element method(FEM)model,and its current accuracy can be equivalent to the resolution of the employed power supply.It was demonstrated that this method reduced the requirements for Hall sensor’s performance and location,and has a more reliable accuracy in contrast to the simulation method.Compared to the experimentally conventional method,the proposed method presents a significantly faster speed.The impact of the SCIF was considered and proven to be negligible for the tested pancake coils.Even for coils whose coil constant vibrates owing to the SCIF,this method can be adapted to directly measure various operational currents.Furthermore,it was demonstrated that the measurement error can be influenced by the current discrepancy among turns when the coil is not in the steady PCM,and a procedure for reducing this error was proposed.展开更多
Lifetime isone of the important indicators of automotive proton exchange membrane fuel cells. People used to evaluate the lifetime of vehicular fuel cells by laboratory tests or road tests that usually take thousands ...Lifetime isone of the important indicators of automotive proton exchange membrane fuel cells. People used to evaluate the lifetime of vehicular fuel cells by laboratory tests or road tests that usually take thousands hours even years. In order to achieve a rapid evaluation technique and to seek lifetime extension methods, a lifetime calculation formation was drawn out in consideration of the vehicle driving cycle and the working condition factors. Bench experiments were individually carried out on two fuel-cell stacks same as ones applied on vehicle, and the performance decay rates of the two stacks were obtained under four operation conditions of changing load cycle, start-stop cycle, idling and heavy load. As a result, the predicted lifetimes rather conform to the actual running status in road test. And the research on the fuel cell performance decay rates under different load conditions was also done. Consequently, an unexpected finding was discovered that operating under micro-current has an effect on recovering fuel cell performance. The vehicle fuel cell rapid assessment method only requires four laboratory tests of driving cycle, load cycle, idle operating conditions and heavy load conditions, and the whole process merely lasts less than 250 h. These experimental results can be used to predict the vehicular fuel cell lifetimes on various utility models or driving cycles, therefore to optimize the application model to prolong the fuel cell lifetime. Actually in the experiment, it has already been proved successfully that the fuel cell lifetime could be extended from 1 100 h to 2 600 h by optimizing operating mode. The quick evaluation method is helpful to develop extended life fuel cell and to deplete fuel cell for a longer time.展开更多
In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is...In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is obtained based on an a priori choice of the regularization parameter. Our analysis is not based on the sequential continuity of the normalized duality mapping.展开更多
Hyrcanian (Caspian) Forest in northern Iran has a richness of biological diversity, with endemic and endangered species. The usage of ground-based skidding is well accepted practice for the extraction of timber from...Hyrcanian (Caspian) Forest in northern Iran has a richness of biological diversity, with endemic and endangered species. The usage of ground-based skidding is well accepted practice for the extraction of timber from the forest, but this operation has tended to cause the greatest environmental problems. The aims of the study were to evaluate and comparison of operational impacts, residual stand damage, regeneration, and to quantify these effects such as: the extent of the damage, wounding patterns, size and distribution after logging operations that utilized two different methods: short log and long log. A Timbetjack cable skidder was used and the study location was in the Kheyrud Forest. Post harvesting assessment of damage to the residual stand was compared along skid trail by 100% inventory method and also for the assessment of regeneration damage along winching strips. The results show that along winching strips the percentage of damage to the regeneration was 44% and 36%, while the tree damages along skid trails reached 2.3% and 4.1% in the short log and long log methods, respectively. The greatest average amount of damage to a bole occurred along the first 1 m up from the ground (97%) and also within 4 m of the skidder centerline (80%). These results show that the short log method causes less damage to the residual stand than the longog method. Tree location to skidder trail appears to have a significant effect on the number and height of scars on a tree. Well designed and constructed trails should be wide enough to allow wood extraction from the forest. Damage to the residual stand might be reduced by proper planning and training of logging crews.展开更多
文摘The rapid development of digital education provides new opportunities and challenges for teaching model innovation.This study aims to explore the application of the BOPPPS(Bridge-in,Objective,Pre-assessment,Participatory learning,Post-assessment,Summary)teaching method in the development of a blended teaching model for the Operations Research course under the background of digital education.In response to the characteristics of the course and the needs of the student group,the teaching design is reconstructed with a student-centered approach,increasing practical teaching links,improving the assessment and evaluation system,and effectively implementing it in conjunction with digital educational technology.This teaching model has shown significant effectiveness in the context of digital education,providing valuable experience and insights for the innovation of the Operations Research course.
文摘Using Euler’s first-order explicit(EE)method and the peridynamic differential operator(PDDO)to discretize the time and internal crystal-size derivatives,respectively,the Euler’s first-order explicit method–peridynamic differential operator(EE–PDDO)was obtained for solving the one-dimensional population balance equation in crystallization.Four different conditions during crystallization were studied:size-independent growth,sizedependent growth in a batch process,nucleation and size-independent growth,and nucleation and size-dependent growth in a continuous process.The high accuracy of the EE–PDDO method was confirmed by comparing it with the numerical results obtained using the second-order upwind and HR-van methods.The method is characterized by non-oscillation and high accuracy,especially in the discontinuous and sharp crystal size distribution.The stability of the EE–PDDO method,choice of weight function in the PDDO method,and optimal time step are also discussed.
文摘In this article, we define the arithmetic operations of generalized trapezoidal picture fuzzy numbers by vertex method which is assembled on a combination of the (α, γ, β)-cut concept and standard interval analysis. Various related properties are explored. Finally, some computations of picture fuzzy functions over generalized picture fuzzy variables are illustrated by using our proposed technique.
基金supported by the National Natural Science Foundation of China(No.50176051)the State Key Development Program for Basic Research of China(No.2000026306).
文摘Three experiments of static state storage method, low-temperature and constant-pressure storage method and low-temperature and constant-pressure storage method were carried out to investigate which method was best in gas hydrate. The relationships of hydrate rate, capacity and liquid temperature versus time were derived and three results were contrasted. The experimental results show lowtemperature and constant-pressure method is better than the other two methods because it's operation period is shorter and storage capacity is larger than the other two. Low-temperature and constant-pressure method is the best method. So new method will be new research objective.
文摘Supply chain management is an essential part of an organisation's sustainable programme.Understanding the concentration of natural environment,public,and economic influence and feasibility of your suppliers and purchasers is becoming progressively familiar as all industries are moving towards a massive sustainable potential.To handle such sort of developments in supply chain management the involvement of fuzzy settings and their generalisations is playing an important role.Keeping in mind this role,the aim of this study is to analyse the role and involvement of complex q-rung orthopair normal fuzzy(CQRONF)information in supply chain management.The major impact of this theory is to analyse the notion of confidence CQRONF weighted averaging,confidence CQRONF ordered weighted averaging,confidence CQRONF hybrid averaging,confidence CQRONF weighted geometric,confidence CQRONF ordered weighted geometric,confidence CQRONF hybrid geometric operators and try to diagnose various properties and results.Furthermore,with the help of the CRITIC and VIKOR models,we diagnosed the novel theory of the CQRONF-CRITIC-VIKOR model to check the sensitivity analysis of the initiated method.Moreover,in the availability of diagnosed operators,we constructed a multi-attribute decision-making tool for finding a beneficial sustainable supplier to handle complex dilemmas.Finally,the initiated operator's efficiency is proved by comparative analysis.
文摘Sea-ice is an important operational item for real timely monitoring and forecasting marine environment of China. This paper introduces an operational method of satellite remote sensing to monitor sea- ice using quantitative data of NOAA, and its contents include computer processing of AVHRR sounding data of NOAA and its program design, imagery processing of sea-ice imagery from satellite and their thematic analysis. The sea-ice satellite colour imageries processed via this software system are able to interpret sea-ice pattern, characterizing it by thickness, maximum position of ice boundary, floe concentration and dynamic process of ice changing. At the same time, analyses of the ice condition of the Bohai Sea for the two-year period (1986-1988) as monitored by satellite have been summarized.
基金Supported by the Governmental Public Industry Research Special Funds for Projects of MWR (200901002,200901003,200901006)Key Projects in the National Science & Technology Pillar Program During the 11th Five-year Plan Period of China (2006BAB04A12)
文摘The controlled volume method of operation is especially suitable for large-scale water delivery canal system with complex operation requirements. An operating simulation model based on the storage volume control method for multi-reach canal system in series was established. In allusion to the deficiency of existing controlled volume algorithm, the improved controlled volume algorithm of the whole canal pools was proposed, and the simulation results indicated that the storage volume and water level of each canal pool could be accurately controlled after the improved algorithm had been adopted. However, for some typical discharge demand operating conditions, if the previously mentioned algorithm was adopted, then it certainly would cause some unnecessary gate adjustments, and consequently the disturbed canal pools would be increased. Therefore, the idea of controlled volume operation method of continuous canal pools was proposed, and corresponding algorithm was designed. Through simulating practical project, the results indicated that the new controlled volume algorithm proposed for typical operating conditions could comparatively and obviously reduce the number of regulated check gates and disturb canal pools for some typical discharge demand operating conditions, thus the control efficiency of canal system could be improved.
文摘Through analysis of operational evaluation factors for tide forecasting, the relationship between the evaluation factors and the weights of forecasters was examined. A tide forecasting method based on dynamic weight distribution for operational evaluation was developed, and multiple-forecaster synchronous forecasting was realized while avoiding the instability cased by only one forecaster. Weights were distributed to the forecasters according to each one's forecast precision. An evaluation criterion for the professional level of the forecasters was also built. The eligibility rates of forecast results demonstrate the skill of the forecasters and the stability of their forecasts. With the developed tide forecasting method, the precision and reasonableness of tide forecasting are improved. The application of the present method to tide forecasting at the Huangpu Park tidal station demonstrates the validity of the method.
基金supported by National Key Technology Research and Development Program of the Ministry of Science and Technology of China(No.2013BAC06B02)Public Science and Technology Research Funds Projects of Ocean (No.201305027)+2 种基金National Natural Science Foundation of China(No.51877024)Liaoning Scientific Research Project of Department of Education of Liaoning Province(No.LZ2015007)High Level Talent Innovation Project of Dalian(No.2016RQ040)
文摘Matching optimization of resonant parameters among the high power inverters,low power transformers and plasma reactors have significant effects on the performance and output of the reactor array when applying the partitioned operation method.In this paper,the Matlab/Simulink electrical model was established based on the method of partitioned operation.The matching relation between resonant parameters is analyzed on the basis of experimental result.As a consequence,transformer leakage inductance and working frequency are the important parameters influencing the operational efficiency of system,leakage inductance of transformer should be adjusted based on the equivalent capacitance of plasma reactor to realize the matching optimization of resonant parameters.
文摘The present work proposed a new method for the modeling by the finite element method of the acoustic propagation problems in infinite axisymmetric cylindrical guides lined with locally reacting absorbent materials without flow. The method deals with the development of an efficient transparent boundary condition based on DtN operators. The method developed in this study is successfully applied to a straight axisymmetric lined guide by imposing a mode on one of the artificial boundaries of the truncated guide. The results are in good agreement with analytical solutions. Applying the method for a non-uniform axisymmetric lined guide which is a complex case, proved its effectiveness and the results compared to those of PML layers are in very good agreement.
基金This research was supported by the National Natural Science Foundation of China (Nos. 41230210 and 41204074), the Science Foundation of the Education Department of Yunnan Province (No. 2013Z152), and Statoil Company (Contract No. 4502502663).
文摘We propose a symplectic partitioned Runge-Kutta (SPRK) method with eighth-order spatial accuracy based on the extended Hamiltonian system of the acoustic waveequation. Known as the eighth-order NSPRK method, this technique uses an eighth-orderaccurate nearly analytic discrete (NAD) operator to discretize high-order spatial differentialoperators and employs a second-order SPRK method to discretize temporal derivatives.The stability criteria and numerical dispersion relations of the eighth-order NSPRK methodare given by a semi-analytical method and are tested by numerical experiments. We alsoshow the differences of the numerical dispersions between the eighth-order NSPRK methodand conventional numerical methods such as the fourth-order NSPRK method, the eighth-order Lax-Wendroff correction (LWC) method and the eighth-order staggered-grid (SG)method. The result shows that the ability of the eighth-order NSPRK method to suppress thenumerical dispersion is obviously superior to that of the conventional numerical methods. Inthe same computational environment, to eliminate visible numerical dispersions, the eighth-order NSPRK is approximately 2.5 times faster than the fourth-order NSPRK and 3.4 timesfaster than the fourth-order SPRK, and the memory requirement is only approximately47.17% of the fourth-order NSPRK method and 49.41% of the fourth-order SPRK method,which indicates the highest computational efficiency. Modeling examples for the two-layermodels such as the heterogeneous and Marmousi models show that the wavefields generatedby the eighth-order NSPRK method are very clear with no visible numerical dispersion.These numerical experiments illustrate that the eighth-order NSPRK method can effectivelysuppress numerical dispersion when coarse grids are adopted. Therefore, this methodcan greatly decrease computer memory requirement and accelerate the forward modelingproductivity. In general, the eighth-order NSPRK method has tremendous potential value forseismic exploration and seismology research.
文摘A novel nonlocal operator theory based on the variational principle is proposed for the solution of partial differential equations.Common differential operators as well as the variational forms are defined within the context of nonlocal operators.The present nonlocal formulation allows the assembling of the tangent stiffness matrix with ease and simplicity,which is necessary for the eigenvalue analysis such as the waveguide problem.The present formulation is applied to solve the differential electromagnetic vector wave equations based on electric fields.The governing equations are converted into nonlocal integral form.An hourglass energy functional is introduced for the elimination of zeroenergy modes.Finally,the proposed method is validated by testing three classical benchmark problems.
基金Supported by Awarded the Second class Prize of National Science and Technology Advance in 2000(J-233-2-08).
文摘AIM: To evaluate the clinical application of serial operations with preservation of spleen.METHODS: Serial operations with preserving spleen were performed on 211 cases in our hospital from 1980 to 2000.The patient's age ranged from 13 to 56 years, averaging 3years. Diseases included splenic injury in 171 cases, portal hypertension in 9 cases, splenic cyst in 10 cases, and the lesion of pancreatic body and tail in 21 cases.RESULTS: All the cases were cured, and 129 patients were followedup from 3 months to 3 years with the leukocyte phagocytosis test, detection of immunoglubin, CT, 99mTc scanning and ultrasonogrsphy. The results were satisfactory.CONCLUSION: The operations with preserving spleen were safe, feasible, and worth of clinical application.
基金supported by National Natural Science Foundation of China(NSFC)under project 51977130.
文摘This study proposes a method for measuring the operational current of high temperature superconducting(HTS)non‐insulation(NI)closed‐loop coils,which operate in the steady persistent‐current‐mode(PCM).HTS NI closed‐loop coils are promising for many easily‐quenching direct‐current(DC)applications,where their performance is determined by magnetomotive forces,total number of turns,and dimensions.As the primary interface parameter in an application system,the operational current must be accurately and rapidly measured.Generally,this is achieved by dividing the measured magnetic field by the coil constant.However,even if the influence of the screening current induced field(SCIF)is not considered,existing methods for the coil constant may be disturbed by the performance and location of Hall sensors,or experience a long measuring period.Therefore,a relatively accurate and fast method is proposed in this study,which is based on adjusting the output current of the adjustable power supply and monitoring the coil voltage as an indicator.The proposed method was validated through experiments and simulations using an equivalent circuit model coupled with a finite element method(FEM)model,and its current accuracy can be equivalent to the resolution of the employed power supply.It was demonstrated that this method reduced the requirements for Hall sensor’s performance and location,and has a more reliable accuracy in contrast to the simulation method.Compared to the experimentally conventional method,the proposed method presents a significantly faster speed.The impact of the SCIF was considered and proven to be negligible for the tested pancake coils.Even for coils whose coil constant vibrates owing to the SCIF,this method can be adapted to directly measure various operational currents.Furthermore,it was demonstrated that the measurement error can be influenced by the current discrepancy among turns when the coil is not in the steady PCM,and a procedure for reducing this error was proposed.
基金supported by National Hi-tech Research and Development Program of China (863 Program, Grant No. 2007AA05Z125)
文摘Lifetime isone of the important indicators of automotive proton exchange membrane fuel cells. People used to evaluate the lifetime of vehicular fuel cells by laboratory tests or road tests that usually take thousands hours even years. In order to achieve a rapid evaluation technique and to seek lifetime extension methods, a lifetime calculation formation was drawn out in consideration of the vehicle driving cycle and the working condition factors. Bench experiments were individually carried out on two fuel-cell stacks same as ones applied on vehicle, and the performance decay rates of the two stacks were obtained under four operation conditions of changing load cycle, start-stop cycle, idling and heavy load. As a result, the predicted lifetimes rather conform to the actual running status in road test. And the research on the fuel cell performance decay rates under different load conditions was also done. Consequently, an unexpected finding was discovered that operating under micro-current has an effect on recovering fuel cell performance. The vehicle fuel cell rapid assessment method only requires four laboratory tests of driving cycle, load cycle, idle operating conditions and heavy load conditions, and the whole process merely lasts less than 250 h. These experimental results can be used to predict the vehicular fuel cell lifetimes on various utility models or driving cycles, therefore to optimize the application model to prolong the fuel cell lifetime. Actually in the experiment, it has already been proved successfully that the fuel cell lifetime could be extended from 1 100 h to 2 600 h by optimizing operating mode. The quick evaluation method is helpful to develop extended life fuel cell and to deplete fuel cell for a longer time.
文摘In this paper, a modified Newton type iterative method is considered for ap- proximately solving ill-posed nonlinear operator equations involving m-accretive mappings in Banach space. Convergence rate of the method is obtained based on an a priori choice of the regularization parameter. Our analysis is not based on the sequential continuity of the normalized duality mapping.
文摘Hyrcanian (Caspian) Forest in northern Iran has a richness of biological diversity, with endemic and endangered species. The usage of ground-based skidding is well accepted practice for the extraction of timber from the forest, but this operation has tended to cause the greatest environmental problems. The aims of the study were to evaluate and comparison of operational impacts, residual stand damage, regeneration, and to quantify these effects such as: the extent of the damage, wounding patterns, size and distribution after logging operations that utilized two different methods: short log and long log. A Timbetjack cable skidder was used and the study location was in the Kheyrud Forest. Post harvesting assessment of damage to the residual stand was compared along skid trail by 100% inventory method and also for the assessment of regeneration damage along winching strips. The results show that along winching strips the percentage of damage to the regeneration was 44% and 36%, while the tree damages along skid trails reached 2.3% and 4.1% in the short log and long log methods, respectively. The greatest average amount of damage to a bole occurred along the first 1 m up from the ground (97%) and also within 4 m of the skidder centerline (80%). These results show that the short log method causes less damage to the residual stand than the longog method. Tree location to skidder trail appears to have a significant effect on the number and height of scars on a tree. Well designed and constructed trails should be wide enough to allow wood extraction from the forest. Damage to the residual stand might be reduced by proper planning and training of logging crews.