Multi-output Gaussian Process Regression Model with Combined Kernel Function for Polyester Esterification Processes

In polyester fiber industrial processes,the prediction of key performance indicators is vital for product quality.The esterification process is an indispensable step in the polyester polymerization process.It has the characteristics of strong coupling,nonlinearity and complex mechanism.To solve these problems,we put forward a multi-output Gaussian process regression(MGPR)model based on the combined kernel function for the polyester esterification process.Since the seasonal and trend decomposition using loess(STL)can extract the periodic and trend characteristics of time series,a combined kernel function based on the STL and the kernel function analysis is constructed for the MGPR.The effectiveness of the proposed model is verified by the actual polyester esterification process data collected from fiber production.

A Hybrid Integrated and Low-Cost Multi-Chip Broadband Doherty Power Amplifier Module for 5G Massive MIMO Application

In this paper,a hybrid integrated broadband Doherty power amplifier(DPA)based on a multi-chip module(MCM),whose active devices are fabricated using the gallium nitride(GaN)process and whose passive circuits are fabricated using the gallium arsenide(GaAs)integrated passive device(IPD)process,is proposed for 5G massive multiple-input multiple-output(MIMO)application.An inverted DPA structure with a low-Q output network is proposed to achieve better bandwidth performance,and a single-driver architecture is adopted for a chip with high gain and small area.The proposed DPA has a bandwidth of 4.4-5.0 GHz that can achieve a saturation of more than 45.0 dBm.The gain compression from 37 dBm to saturation power is less than 4 dB,and the average power-added efficiency(PAE)is 36.3%with an 8.5 dB peak-to-average power ratio(PAPR)in 4.5-5.0 GHz.The measured adjacent channel power ratio(ACPR)is better than50 dBc after digital predistortion(DPD),exhibiting satisfactory linearity.

An Industrial Intrusion Detection Method Based on Hybrid Convolutional Neural Networks with Improved TCN

Network intrusion detection systems(NIDS)based on deep learning have continued to make significant advances.However,the following challenges remain:on the one hand,simply applying only Temporal Convolutional Networks(TCNs)can lead to models that ignore the impact of network traffic features at different scales on the detection performance.On the other hand,some intrusion detection methods considermulti-scale information of traffic data,but considering only forward network traffic information can lead to deficiencies in capturing multi-scale temporal features.To address both of these issues,we propose a hybrid Convolutional Neural Network that supports a multi-output strategy(BONUS)for industrial internet intrusion detection.First,we create a multiscale Temporal Convolutional Network by stacking TCN of different scales to capture the multiscale information of network traffic.Meanwhile,we propose a bi-directional structure and dynamically set the weights to fuse the forward and backward contextual information of network traffic at each scale to enhance the model’s performance in capturing the multi-scale temporal features of network traffic.In addition,we introduce a gated network for each of the two branches in the proposed method to assist the model in learning the feature representation of each branch.Extensive experiments reveal the effectiveness of the proposed approach on two publicly available traffic intrusion detection datasets named UNSW-NB15 and NSL-KDD with F1 score of 85.03% and 99.31%,respectively,which also validates the effectiveness of enhancing the model’s ability to capture multi-scale temporal features of traffic data on detection performance.

Walsh Spectral Characteristics and the Auto-Correlation Function Characteristics of Forming Orthomorphic Permutations of Multi-Output Functions

Orthomorphic permutations have good characteristics in cryptosystems. In this paper, by using of knowledge about relation between orthomorphic permutations and multi-output functions, and conceptions of the generalized Walsh spectrum of multi-output functions and the auto-correlation function of multi-output functions to investigate the Walsh spectral characteristics and the auto-correlation function characteristics of orthormophic permutations, several results are obtained.

Relationship between Multi-Output Partially Bent Functions and Multi-Output Bent Functions

In this paper, the definition of multl-output partially Bent functions is presented and some properties are discussed. Then the relationship between multi-output partially Bent functions and multi-output Bent functions is given in Theorem 4, which includes Walsh spectrum expression and function expression. This shows that multi-output partially Bent functions and multi-output Bent functions can define each other in principle. So we obtain the general method to construct multi-output partially Bent functions from multi-output Bent functions.

Application of multi-outputs LSSVR by PSO to the aero-engine model

Considering the modeling errors of on-board self-tuning model in the fault diagnosis of aero-engine, a new mechanism for compensating the model outputs is proposed. A discrete series predictor based on multi-outputs least square support vector regression （LSSVR） is applied to the compensation of on-board self-tuning model of aero-engine, and particle swarm optimization （PSO） is used to the kernels selection of multi-outputs LSSVR. The method need not reconstruct the model of aero-engine because of the differences in the individuals of the same type engines and engine degradation after use. The concrete steps for the application of the method are given, and the simulation results show the effectiveness of the algorithm.

Cloud removal of remote sensing image based on multi-output support vector regression

Removal of cloud cover on the satellite remote sensing image can effectively improve the availability of remote sensing images. For thin cloud cover, support vector value contourlet transform is used to achieve multi-scale decomposition of the area of thin cloud cover on remote sensing images. Through enhancing coefficients of high frequency and suppressing coefficients of low frequency, the thin cloud is removed. For thick cloud cover, if the areas of thick cloud cover on multi-source or multi-temporal remote sensing images do not overlap, the multi-output support vector regression learning method is used to remove this kind of thick clouds. If the thick cloud cover areas overlap, by using the multi-output learning of the surrounding areas to predict the surface features of the overlapped thick cloud cover areas, this kind of thick cloud is removed. Experimental results show that the proposed cloud removal method can effectively solve the problems of the cloud overlapping and radiation difference among multi-source images. The cloud removal image is clear and smooth.

Local Partial Least Squares Based Online Soft Sensing Method for Multi-output Processes with Adaptive Process States Division

Local learning based soft sensing methods succeed in coping with time-varying characteristics of processes as well as nonlinearities in industrial plants. In this paper, a local partial least squares based soft sensing method for multi-output processes is proposed to accomplish process states division and local model adaptation,which are two key steps in development of local learning based soft sensors. An adaptive way of partitioning process states without redundancy is proposed based on F-test, where unique local time regions are extracted.Subsequently, a novel anti-over-fitting criterion is proposed for online local model adaptation which simultaneously considers the relationship between process variables and the information in labeled and unlabeled samples. Case study is carried out on two chemical processes and simulation results illustrate the superiorities of the proposed method from several aspects.

IMPROVEMENT OF THE ALGORITHM PRINCIPLES FOR MINIMIZATION OF MULTI-OUTPUT FUNCTIONS

In this paper,the application of extraction principle for logic function minimiza-tion to multi-output case is studied.A defect in original algorithm in dealing with multi-outputextrema is made up,and on this base,three kinds of less-than terms in different conditions aredefined.In addition,three kinds of generalized definition of less-than terms are given,so as to findout more efficiently the covers with minimal number of terms and irredundant function outputs.This work makes the multi-output extraction principle closer to perfection.An algorithm basedon the work is presented.

A comparative analysis of multi-output frontier models

Recently, there have been more debates on the methods of measuring efficiency. The main objective of this paper is to make a sensitivity analysis for different frontier models and compare the results obtained from the different methods of estimating multi-output frontier for a specific application. The methods include stochastic distance function frontier, stochastic ray frontier, and data envelopment analysis. The stochastic frontier regressions with and without the inefficiency effects model are also com-pared and tested. The results indicate that there are significant correlations between the results obtained from the alternative estimation methods.

Spectral Characteristics of the Best Affine Approach of Multi-Output m-Valued Logical Functions

This paper discusses the best affine approach （BAA） of multi-output m-valued logical functions. First, it gives the spectra of rate of accordance between multi-output m-valued logical functions and their affine functions, then analyzes the BAA of multi-output m-valued logical functions and finally gives the spectral characteristics of BAA of multi-output m-valued logical functions.

Dynamic analysis on methanation reactor using a double-input–multi-output linearized model

A double-input–multi-output linearized system is developed using the state-space method for dynamic analysis of methanation process of coke oven gas.The stability of reactor alone and reactor with feed-effluent heat exchanger is compared through the dominant poles of the system transfer functions.With single or double disturbance of temperature and CO concentration at the reactor inlet,typical dynamic behavior in the reactor,including fast concentration response,slow temperature response and inverse response,is revealed for further understanding of the counteraction and synergy effects caused by simultaneous variation of concentration and temperature.Analysis results show that the stability of the reactor loop is more sensitive than that of reactor alone due to the positive heat feedback.Remarkably,with the decrease of heat exchange efficiency,the reactor system may display limit cycle behavior for a pair of complex conjugate poles across the imaginary axis.

APPLICATION OF FRF ESTIMATOR BASED ON ERRORS-IN-VARIABLES MODEL IN MULTI-INPUT MULTI-OUTPUT VIBRATION CONTROL SYSTEM

The FRF estimator based on the errors-in-variables （EV） model of multi-input multi-output （MIMO） system is presented to reduce the bias error of FRF HI estimator. The FRF HI estimator is influenced by the noises in the inputs of the system and generates an under-estimation of the true FRF. The FRF estimator based on the EV model takes into account the errors in both the inputs and outputs of the system and would lead to more accurate FRF estimation. The FRF estimator based on the EV model is applied to the waveform replication on the 6-DOF （degree-of-freedom） hydraulic vibration table. The result shows that it is favorable to improve the control precision of the MIMO vibration control system.

用于5G多波束MIMO系统的先进低温共烧陶瓷封装的39 GHz双信道收发器芯片组

本文介绍了一种用于5G多输入多输出(MIMO)应用的39 GHz收发器前端芯片组。每个芯片包括两个可变增益的频率转换通道,可以同时支持两个独立波束,芯片还集成了一个本地振荡器链和数字模块,用于多芯片扩展和增益状态控制。为了提高射频性能,对前端系统的关键模块提出了几种电路级改进技术。此外,开发了一种先进的低温共烧陶瓷工艺来封装39 GHz双通道收发器芯片组,实现了低封装损耗和两个发射(TX)/接收(RX)通道之间的高隔离。进行了芯片级和系统级封装(SIP)测量,以演示收发器芯片组的性能。测量结果表明,TX SIP的最大增益为11 dB,饱和输出功率为10 dBm;RX SIP的最大增益为52 dB,噪声系数为5.4 dB,输出压缩点为7.2 dBm。该收发器的单通道通信链路测试表明,64正交调幅(QAM)调制的误差矢量幅度(EVM)为3.72%,频谱效率为3.25 bit·s^(−1)·Hz^(−1);256-QAM调制在1 m距离上的误差矢量幅度(EVM)为3.76%,频谱效率为3.9 bit·s^(−1)·Hz^(−1)。基于该芯片组,还开发了39 GHz多波束原型,用于执行5G毫米波应用的MIMO操作。单流和双流传输的空中通信链路表明,多波束原型机可以覆盖5~150 m的距离,吞吐量相当。

Harmonic Transfer Function Based Single-input Single-output Impedance Modeling of LCC-HVDC Systems

This study presents a harmonic transfer function(HTF)based single-input single-output(SISO)impedance modeling method.The method converts an HTF from phase domain to sequence domain and then transforms it into an SISO impedance while preserving the frequency coupling information of different sequences and different harmonics.Applications of this method to a line-commutated converter based high-voltage direct current(LCC-HVDC)system are presented.The results demonstrate the accuracy of the derived SISO impedance,and a truncation-order selection is suggested.The case study shows that the proposed method facilitates simpler impedance measurements and associated stability analysis.

Evaluation of Linear Precoding Schemes for Cooperative Multi-Cell MU MIMO in Future Mobile Communication Systems

In Mobile Communication Systems, inter-cell interference becomes one of the challenges that degrade the system’s performance, especially in the region with massive mobile users. The linear precoding schemes were proposed to mitigate interferences between the base stations (inter-cell). These schemes are categorized into linear and non-linear;this study focused on linear precoding schemes, which are grounded into three types, namely Zero Forcing (ZF), Block Diagonalization (BD), and Signal Leakage Noise Ratio (SLNR). The study included the Cooperative Multi-cell Multi Input Multi Output (MIMO) System, whereby each Base Station serves more than one mobile station and all Base Stations on the system are assisted by each other by shared the Channel State Information (CSI). Based on the Multi-Cell Multiuser MIMO system, each Base Station on the cell is intended to maximize the data transmission rate by its mobile users by increasing the Signal Interference to Noise Ratio after the interference has been mitigated due to the usefully of linear precoding schemes on the transmitter. Moreover, these schemes used different approaches to mitigate interference. This study mainly concentrates on evaluating the performance of these schemes through the channel distribution models such as Ray-leigh and Rician included in the presence of noise errors. The results show that the SLNR scheme outperforms ZF and BD schemes overall scenario. This implied that when the value of SNR increased the performance of SLNR increased by 21.4% and 45.7% for ZF and BD respectively.

Transfer-learning multi-input multi-output equalizer for mode-division multiplexing systems

We propose a transfer-learning multi-input multi-output(TL-MIMO)scheme to significantly reduce the required training complexity for converging the equalizers in mode-division multiplexing(MDM)systems.Based on a built three-mode(LP01,LP11a,and LP11b)multiplexed experimental system,we thoughtfully investigate the TL-MIMO performances on the three-typed data,collecting from different sampling times,launching optical powers,and inputting optical signal-to-noise ratios(OSNRs).A dramatic reduction of approximately 40%–83.33%in the required training complexity is achieved in all three scenarios.Furthermore,the good stability of TL-MIMO in both the launched powers and OSNR test bands has also been proved.

A TSE based design for MMSE and QRD of MIMO systems based on ASIP

A Taylor series expansion(TSE) based design for minimum mean-square error(MMSE) and QR decomposition(QRD) of multi-input and multi-output(MIMO) systems is proposed based on application specific instruction set processor(ASIP), which uses TSE algorithm instead of resource-consuming reciprocal and reciprocal square root(RSR) operations.The aim is to give a high performance implementation for MMSE and QRD in one programmable platform simultaneously.Furthermore, instruction set architecture(ISA) and the allocation of data paths in single instruction multiple data-very long instruction word(SIMD-VLIW) architecture are provided, offering more data parallelism and instruction parallelism for different dimension matrices and operation types.Meanwhile, multiple level numerical precision can be achieved with flexible table size and expansion order in TSE ISA.The ASIP has been implemented to a 28 nm CMOS process and frequency reaches 800 MHz.Experimental results show that the proposed design provides perfect numerical precision within the fixed bit-width of the ASIP, higher matrix processing rate better than the requirements of 5G system and more rate-area efficiency comparable with ASIC implementations.

Ordered successive noise projection cancellation algorithm for dual lattice-reduction-aided MIMO detection

A novel nonlinear multi-input multi-output MIMO detection algorithm is proposed which is referred to as an ordered successive noise projection cancellation OSNPC algorithm. It is capable of improving the computation performance of the MIMO detector with the conventional ordered successive interference cancellation OSIC algorithm. In contrast to the OSIC in which the known interferences in the input signal vector are successively cancelled the OSNPC successively cancels the known noise projections from the decision statistic vector. Analysis indicates that the OSNPC is equivalent to the OSIC in error performance but it has significantly less complexity in computation.Furthermore when the OSNPC is applied to the MIMO detection with the preprocessing of dual lattice reduction DLR the computational complexity of the proposed OSNPC-based DLR-aided detector is further reduced due to the avoidance of the inverse of the reduced basis of the dual lattice in computation compared to that of the OSIC-based one. Simulation results validate the theoretical conclusions with regard to both the performance and complexity of the proposed MIMO detection scheme.

ERGODIC CAPACITY ANALYSIS FOR SIMO COGNITIVE FADING CHANNEL IN SPECTRUM SHARING ENVIRONMENT

In this paper,we consider the spectrum sharing Cognitive Radio(CR) system,wherein Single-Input Multi-Output(SIMO) cognitive fading channel is assumed.Subject to the average in-terference constraint of primary user,the ergodic capacity of cognitive user involving joint beamforming and power control is analyzed.We derive the optimal joint beamforming and power control strategy and deduce the general integral expression for ergodic capacity.Furthermore,under different channel fadings including Raleigh fading,Nakagami-m fading and Lognormal shadowing fading,the specific expressions of ergodic capacity for SIMO cognitive channel are exhibited.Most of the expressions are presented in closed-form or with some special integral functions.Large amount of simulations are conducted to corroborate our theoretical results.